Starting Workflow when new BOM created and exist one change.

Hi All,
Please kindly help that I have to create a workflow for trigger the BOM creation or change.
And now I can't find what is the trigger event is for both of BOM creation or change. Could you please let me know which event should I used for triggering.
Thanks
Jack.

hi jack,
As agardip as said create a subtype of the bus BUS1080 and then add two events CREATE and CHANGE and to these events give the action in SWEC and now.
In ur work flow u can have two triggering events in ur basic data one for CREATE and other for CHANGE activate both.
Regards,
Dheepak

Similar Messages

How to start a workflow when a value in specific column is changed?

HI !!
I would like that my workflow will run only if a value on a specific colunm will change.
is there a way to do it without using a third colunm ?
thank you !
nikita.

Hi,
According to your post, my understanding is that you wanted to start a workflow when a value in specific column is changed.
When you create workflow, if you check the “start the workflow automatically when an item is changed”, the workflow will be started automatically once the item is edited.
In the other word, no matter which column we changed, the the workflow will be started automatically.
As a workaround, we can add condition or action to make the workflow excute the next step only if the value in specific column is changed.
There are two options to achieve it.
Use the “Wait for Field Change in Current Item" action”. If you add the action at the first, the workflow will excute the next step until the column is chaned to the specific value.
2. User the “If any value equals to value” condition. If you add the condition at the first, the workflow will excute the next step if the condition is satisfied.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Starting workflow, when importing records

Hello!
Is it possible to start workflow, when records were imported with Import Manager and the import action was set as Update or Replace?
Thanks,
Vika

Hi Viktoria,
It is possible to trigger workflow whenever records are imported by setting the Trigger action while defining the workflow as "Record Import".
Hope this answers your query,
Regards,
Rashmi

I have a new MacBook Pro, and existing iPad 2 and iphone.

I have a new MacBook Pro, and existing ipad 2 and iphone 4s. icloud was already set up on the iphone and ipad, and it is now set up on the MacBook Pro. However, when I make an entry in one device, it does not populate the other two devices. Also, all my podcasts and music did not populate itunes in the computer. What am I missing?

Could you please confirm what it is you are making an entry in, that isn't syncing (address book, iCal etc)
Is there any reason you think iTunes should automatically fill your library for you.

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

Good day BenithaK,
Once you have changed your Apple ID, you need to set it up for use in the various systems such as iTunes, the App Store, etc so it can be used as intended. This article shows how to do that -
Apple ID: What to do after you change your Apple ID - Apple Support
To change your iTunes billing information for either Apple ID account, follow the directions in this article -
iTunes 12 for Mac: Manage your iTunes Store account
Thanks for using Apple Support Communities.
Safe computing,
Brett L

Getting error when i am creating and tesing data server in ODI

Hi,
Getting error when i am creating and tesing data server in oracle (Physical Architecture) in topology manager ODI.
Please anybody help me on this.
Java.net.ConnectException: Connection refused: connect
 at java.net.PlainSocketImpl.socketConnect(Native Method)
 at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
 at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
 at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
 at java.net.Socket.connect(Socket.java:529)
 at java.net.Socket.connect(Socket.java:478)
 at java.net.Socket.<init>(Socket.java:375)
 at java.net.Socket.<init>(Socket.java:189)
 at com.sunopsis.graphical.l.pm.a(pm.java)
 at com.sunopsis.graphical.l.pm.s(pm.java)
 at com.sunopsis.graphical.l.pm.g(pm.java)
 at com.sunopsis.graphical.l.pm.a(pm.java)
 at com.sunopsis.graphical.l.pm.a(pm.java)
 at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.Component.processMouseEvent(Component.java:6263)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
 at java.awt.Component.processEvent(Component.java:6028)
 at java.awt.Container.processEvent(Container.java:2041)
 at java.awt.Component.dispatchEventImpl(Component.java:4630)
 at java.awt.Container.dispatchEventImpl(Container.java:2099)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
 at java.awt.Container.dispatchEventImpl(Container.java:2085)
 at java.awt.Window.dispatchEventImpl(Window.java:2478)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
 at java.awt.Dialog$1.run(Dialog.java:1046)
 at java.awt.Dialog$3.run(Dialog.java:1098)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.awt.Dialog.show(Dialog.java:1096)
 at java.awt.Component.show(Component.java:1563)
 at java.awt.Component.setVisible(Component.java:1515)
 at java.awt.Window.setVisible(Window.java:842)
 at java.awt.Dialog.setVisible(Dialog.java:986)
 at com.sunopsis.graphical.l.pm.q(pm.java)
 at com.sunopsis.graphical.l.pm.<init>(pm.java)
 at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
 at com.sunopsis.graphical.frame.bo.w(bo.java)
 at com.sunopsis.graphical.frame.bo.d(bo.java)
 at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.Component.processMouseEvent(Component.java:6263)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
 at java.awt.Component.processEvent(Component.java:6028)
 at java.awt.Container.processEvent(Container.java:2041)
 at java.awt.Component.dispatchEventImpl(Component.java:4630)
 at java.awt.Container.dispatchEventImpl(Container.java:2099)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
 at java.awt.Container.dispatchEventImpl(Container.java:2085)
 at java.awt.Window.dispatchEventImpl(Window.java:2478)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Thanks,
Krish

So are you getting the same error when you try from the installed agent or the tool (Local agent)? Is your agent on the same machine or different machine. If so, does that particular machine can connect to the database?
Also, are you using the same JDBC driver that you are using in SQLDeveloper? Same URL?
Typically, connection refused error appears with wrong instance or wrong port. Try telnet-ing the in the database server and db port. See what happens there!!! The java stack that you provided here is not an SQL exception, it is related to socket creation. It has less to do with JDBC and more to do with physical resources like machine, port and permission.

Getting error when i am creating and tesing data server in oracle (Physical

Hi,
Getting error when i am creating and tesing data server in oracle (Physical Architecture) in topology manager.
Please anybody help me on this.
Java.net.ConnectException: Connection refused: connect
 at java.net.PlainSocketImpl.socketConnect(Native Method)
 at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
 at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
 at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
 at java.net.Socket.connect(Socket.java:529)
 at java.net.Socket.connect(Socket.java:478)
 at java.net.Socket.<init>(Socket.java:375)
 at java.net.Socket.<init>(Socket.java:189)
 at com.sunopsis.graphical.l.pm.a(pm.java)
 at com.sunopsis.graphical.l.pm.s(pm.java)
 at com.sunopsis.graphical.l.pm.g(pm.java)
 at com.sunopsis.graphical.l.pm.a(pm.java)
 at com.sunopsis.graphical.l.pm.a(pm.java)
 at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.Component.processMouseEvent(Component.java:6263)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
 at java.awt.Component.processEvent(Component.java:6028)
 at java.awt.Container.processEvent(Container.java:2041)
 at java.awt.Component.dispatchEventImpl(Component.java:4630)
 at java.awt.Container.dispatchEventImpl(Container.java:2099)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
 at java.awt.Container.dispatchEventImpl(Container.java:2085)
 at java.awt.Window.dispatchEventImpl(Window.java:2478)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
 at java.awt.Dialog$1.run(Dialog.java:1046)
 at java.awt.Dialog$3.run(Dialog.java:1098)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.awt.Dialog.show(Dialog.java:1096)
 at java.awt.Component.show(Component.java:1563)
 at java.awt.Component.setVisible(Component.java:1515)
 at java.awt.Window.setVisible(Window.java:842)
 at java.awt.Dialog.setVisible(Dialog.java:986)
 at com.sunopsis.graphical.l.pm.q(pm.java)
 at com.sunopsis.graphical.l.pm.<init>(pm.java)
 at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
 at com.sunopsis.graphical.frame.bo.w(bo.java)
 at com.sunopsis.graphical.frame.bo.d(bo.java)
 at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.Component.processMouseEvent(Component.java:6263)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
 at java.awt.Component.processEvent(Component.java:6028)
 at java.awt.Container.processEvent(Container.java:2041)
 at java.awt.Component.dispatchEventImpl(Component.java:4630)
 at java.awt.Container.dispatchEventImpl(Container.java:2099)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
 at java.awt.Container.dispatchEventImpl(Container.java:2085)
 at java.awt.Window.dispatchEventImpl(Window.java:2478)
 at java.awt.Component.dispatchEvent(Component.java:4460)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

HI,
check the jdbc url.
The datbase and the listener to which you are connecting are suppose to be up and running.
For testing try and connect using sqlplus from the machine you are trying to make a connection,
Reshma

Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

Is it possible to use Aperture to make a new jpg from two existing ones? I'd essentially like to create a photo collage (without using existing templates) that I can then print as a single image, rather than in a book. Any advice will be most welcome! Thanks.

https://discussions.apple.com/message/15678716#15678716
(Added)
The main point is that Aperture is used to make digital negatives as good as they can be (for the uses you define), but it does not ADD date to your digital negatives, nor does it produce NEW combination files. For those tasks you need a Graphics program.
Message was edited by: Kirby Krieger

Script set to auto apply Retention policy to all new mailbox created and run everyday

Script to set auto apply Retention policy to all new mailbox created and run everyday on Exchange 2007 , 2010 , and 2013.
Could you please help me with the script will rename the policy name please help me with script..
Thanks,
Chandu

Hi Chandu,
Have you find the solution finally? Have you tried Pavan's suggestion?
Sorry for my lacking of code and script. If your requirement still haven't been achieved, I suggest we can ask a question in Exchange Development forum and Script Center for more professional suggestion:
Microsoft Exchange Development forum
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdevelopment/threads
Script Center
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Regards,
Winnie Liang
TechNet Community Support

How do I Create and Manage one library for several computers

As our family has grown over the years, we have 4 kids and 6 macs and duplicate images scattered thought all the separate computers in their own libraries. Is there a way to create and manage one central library that all computers access? That way we can reduce the headaches when we need an image and have to go to each computer and search it's library. Not to mention when we need to jump on a computer and it doesn't happen to be the one we have our library on and need to download our pictures and they end up forever lost on a different computer.

You cannot share a library over the network, since a library needs to be on a locally mounted volume, but you can put a shared library onto a "sneaker drive" and plug it into each of your mad in turn, see Apple's support document:
iPhoto: Sharing libraries among multiple users http://support.apple.com/en-us/HT201517
iPhoto does not support to merge libraries. But iPhoto Library Manager can.
You can download it here: http://www.fatcatsoftware.com/iplm/
See : http://www.fatcatsoftware.com/iplm/Help/merging%20libraries.html
Or, if you have Aperture, you can use it to merge libraries. Aperture 3.3: How to use Aperture to merge iPhoto libraries

Setting up a new library from an existing one

Due to lack of Genius mixes I have decided to set up a new library from my existing one but what I wandered was is there anyway of retaining my ratings/play counts etc by copying the iTunes database file from my original library folder.
I have over 100gb of content in my library and don't really wish to have to go through the process of rating everything again as my 'main' library is over three years of tweaking,adding & modifying etc.
Upon setting up this new library (which is taking ages to load)I have the "Turn on Genius" option down the right hand side which I cannot get in my main library.
I have just purchased a 5th generation Nano but cannot access Genius on it as it says my iTunes library doesn't have Genius enabled but it is I just can't get any Genius mixes.

Try this.
Quit iTunes.
Drag the *iTunes library.itl* file and *iTunes library.xml* to the desktop. Do NOT delete either of them.
Launch iTunes.
Do NOT add anything.
Go to File -> Library -> Import playlist and select the iTunes library.xml file on the desktop.
See if the ratings and the Genius mixes appear.
If so, you are good to go and can delete the *iTunes library.itl* file and *iTunes library.xml* on the desktop.
If not, don't delete anything and post back.

I can neither save new bookmarks nor delete existing ones.

My bookmark system worked until a few days ago, and now will not let me save new pages or delete existing ones. Tried the two methods described on main site, neither worked.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

Cannot add new contact or edit existing one

Cannot add new contact or edit existing one. TH GSM, curve 8900, OS v5.0.01067, file free none ,battery pull didn't fix the problem, applications Google maps 3.0.2, whatsapp 2.6.2177. Device even freezes when trying to add or edit . Thanks

I am having the exact same problem!! I hope we get an answer.

I got a new debit card and I tried changing my info and it always says my card is declined. I can't buy anything.

I got a new debit card and I tried changing my info and it always says my card is declined. I can't buy anything.

Hi Danny724,
Welcome to the Support Communities!
I would suggest updating your billing information in the iTunes application, signing out of your account and signing back in; and then trying to complete the purchase. If the issue persists, the iTunes Store Support Team can review your account with you.
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Starting Workflow when new BOM created and exist one change.

Similar Messages

Maybe you are looking for