Startup of a newly installed Database

Hi,
1. If I use startup command with no further clause to specify pfile location, I got error like this:
ora-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/opt/oracle/920/dbs/initMY_ORACLE.ora'
2. So then I followed the Administration Guide document to try specifying the pfile location. I found one in admin directory. So I entered:
startup pfile = /opt/oracle/admin/(DBNAME)/pfile/init(SIDNAME).ora.9202006221750
Then I see the instance was started, but followed by error:
ORA-01990: error opening password file ''/opt/oracle/920/dbs/orapw'
ORA-27037: unable to obtain file status
Linux error: 2: No such file or directory
Additional information: 3
In the dbs dirctory there is a file called orapw(SIDNAME), but I cannot use Text Editor to open the file.
3. I then tried setting pfile = /opt/oracle/920/dbs/spfile(SIDNAME).ora, but got this error:
LRM-00123: invalid character 0 found in the input file
ORA-01078 failure in processing system parameters
4. I also tried setting pfile = /opt/oracle/920/dbs/init.ora and saw the instance was started, but still with error:
ORA-00205: error in identifying controlfile, check alert log for more info. So I went to check them in /opt/oracle/admin/(DBNAME)/bdump. There are two files: alert_MY_ORACLE.log and alert_(SIDNAME).log. The first one has the current info listing my startup actions 5 minutes ago. The second one lists the installation actions 3 days ago. I think this is strange because was the default SID name or the DBName during installation and I did changed it to my own (SIDNAME). I assume the most recent actions should be in alert_(SIDNAME).log, not alert_MY_ORACLE.log file.
So, what is wrong? Or what did I do wrong?
In the item 2 above, is it possile to change oracle's default path for the password file from '/opt/oracle/920/dbs/orapw' to '/opt/oracle/920/dbs/orapw'(SIDNAME)'?
For item 4, does the fact that Oracle write to alert_MY_ORACLE.log instead of alert_(SIDNAME).log mean somewhere in the system got the DBNAME or SID name confused? If so, how can I fix it?
Sorry for being so long ...

a). where do I find other commands such as"$ORACLE_HOME/bin/dbca" to launch the GUI
interfaces?
In $ORACLE_HOME/bin directory.Sorry I wasn't specific or clear enough. I meant where I can find more info to learn similar commands to launch other GUI. In other words, if I can use $ORACLE_HOME/bin/dbca to open Configuration Assistant, what kind of documentation would list all such commands so that I can learn to launch other things such as Net Manager, etc. I know I will first read the Admin Guide doc you posted earlier.
b). what is $ORACLE_HOME variable defined? Is it alinux system variable. If so, is there another
example, such as calculator or any other programs?
Since I did set SID to a certain value other thanMY_ORACLE, it seems strange to me that the working
log file is still using MY_ORACLE in its file name.
The other log file that is named after the real SID
only has installation records.
Can you post me the exact steps that you used for
change of ORACLE_SID?When I installed the DB a couple of days ago, there was a screen that prompts me to enter Global Database Name and SID. Today, when I used your command $ORACLE_HOME/bin/dbca to launch DB Configuration Assistant, I saw that window again, except this time (if memory is accurate) SID is defaulte to be the same as the Global DB Name. I guess the first time a DB was created?
When I am writing this the new DB is still under creation.
such as calculator or any other programs?If you are using some Windowmanager or command line?
If windowmanager then look at menu (Gnome and KDE
window managers has start menu similar to windows
GUI).
Executables are usually installed in /bin /usr/bin
and /usr/local/binThanks and I am puting it in the notes.
I did set them different during installation.AFAIK, DBNAME could be set only during DB creation.
According to message that you got I belive you didn't
create the database.I thought a DB was created during installation, although not anyone that I design. What is AFAIK?
Yep, it's in my bookmarks.If you will read it, you will find all answer that
you looking for...Shame on me to be a slow reader, or an anxious trier.

Similar Messages

Having trouble transferring large files from SSD startup disk to newly installed internal HDD

Have just installed an additional 2TB Samsung HDD in place of my optical drive on my late-2011 MacBook Pro.
Specs:
MacBook Pro 15inch late-2011
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
Hard Drives:
Startup = 120GB SSD
New HDD = 2TB SATA Samsung M9T
OS: Yosemite 10.10.1 (14B25)
Issue:
Installed my new 2TB SATA drive and it appeared OK in Finder. I was able to navigate to it and create new folders and move small files into it (under 100MB maybe)
Really want to move my iPhoto library onto the 2TB disk to free up space for Apps on my SSD, but when I try to copy/move it over it only does the first few MB then freezes and appears to timeout as the new HDD disappears from Finder and ejects itself. I'm surprised that the eject stuff shows for an internal HDD but that's a side issue.
Have read about similar issues in other OS versions, especially around external HDD and have tried the following already:
* Looked at power management of the hard disks to stop them going to sleep
* Have told Spotlight not to index the new HDD to prevent the indexing task causing issues
* Both SSD and new HDD are formatted using MAC OS/X Extended (not FAT)
* Have tried fixing permissions on both disks as I believe there can be issues in Yosemite
I'm still having a problem despite trying the above. Struggling!
Any help much appreciated.

Open Disk Utility. By selecting one of the two entries for the HDD please determine how it is formatted and what partition map it is using. I suspect you did not partition or erase this drive before use. If that's true, then do this:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
Now you can try your file transfers again. However, before you do I recommend you clone your SSD to the HDD so the latter could be used as your boot drive should it be needed. That will also create an Home folder on the HDD with the files you wish to move to it. You can then simply remove those files from the SSD to free up the space.
Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the new HDD. Source means the SSD startup volume.

Tried to configure APEX in newly installed database 11.1 but failed.

Hello,
I have followed the steps in the Post Installation Tasks for APEX but I cannot access the Admin login page. I tried using the following URL: "http://localhost:8080/apex/apex_admin" but I get a "Page not Found" error.
For the HTTP Server I chose the "embedded PL/SQL gateway" and NOT the "Oracle HTTP Server and mod_plsql." In other words, I followed only the steps pertaining to configuring the embedded PL/SQL gateway.
Here is a summery of the steps that I took to configure APEX in database 11.1:
1) Run apxconf.sql
2) When prompted, set port to "8080" for the Oracle XML DB HTTP server.
3) unlock the ANONYMOUS account
4) Enabled the Oracle XML DB HTTP Server
5) I skipped "Configuring Oracle HTTP Server in a New Installation."
6) I skipped "Configuring Oracle HTTP Server Distributed with Oracle Database 11g."
7) I skipped "Copying the Images Directory."
8) I DID do "Enabling Network Services in Oracle Database 11g - Granting Connect Privileges" and successfully ran the script provided.
9) I did not do "About Running Oracle Application Express in Other Languages."
10) I did not do "Managing JOB_QUEUE_PROCESSES."
11) I did not do "Obfuscating PlsqlDatabasePassword Parameter."
12) I could not do this step "Logging In to Oracle Application Express."
When I had previously upgraded APEX 2.0 to 3.0 using the XE database, I distinctly remember "Copying the Images Directory" and other HTTP Server setup related steps.
Can I use the embeded PL/SQL Gateway on my laptop running windows XP or do I have to use Oracle HTTP Server and mod_plsql?
Please let me know what I should do.
Thank you in advance.
Linda

Linda:
Make sure that the Oracle Listener configuration file has an entry similar to
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = localhost )(PORT = 8080))
(Presentation = HTTP)(Session = RAW)
Varad

Newly installed Premiere Elements 12 quits at startup, on Mac.

Newly installed Premiere Elements 12 quits repeatedly at startup. Mac OS 10.9

pastorok
Please refer to your other thread on Adobe contact information for my comments on that.
It might be a good idea to contact Adobe via its Adobe Chat to discuss "Downloading, Installing, and Setting Up". This does not prohibit you from continuing your Premiere Elements 12 issues here. The positive part about the Adobe contact is that, with the latest version, it may offer the opportunity for remote troubleshooting of your computer and the issue; whereas that is not possible in this user to user forum.
Lots of avenues to pursue...the usual drill...
a. Problem antivirus and firewalls disabled?
b. Running program from User Account with Administrative Privileges as well as Run As Administrator (from right click of desktop icon and Run As Administrator selection)?
c. Latest version of QuickTime installed on computer with Premiere Elements 12?
d. Have you ever gotten the program opened long enough to update it from 12 to 12.1?
e. Video card/graphics card driver up to date according to web site of manufacturer of the card?
Please update us on your progress when you get the chance.
Thank you.
ATR

I have Adobe Flash Player 14 ActiveX installed in my computer, but the newly installed Firefox/Modzilla keeps requesting I install Adobe Flash Player plug-ins

I have been using the Adobe Flash Player 14 ActiveX with IE/Bing and Google, but I keep getting the request to install Adobe Flash Player 14 ActiveX plugins on the newly installed Firefox/Mozilla when browsing on certain sites. Why?
Application Basics
Name: Firefox
Version: 31.0
User Agent: Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Firefox/31.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: avast! Online Security
Version: 9.0.2018.95
Enabled: false
ID: [email protected]
Graphics
Adapter Description: Intel(R) Q965/Q963 Express Chipset Family
Adapter Drivers: igdumdx32
Adapter RAM: Unknown
Device ID: 0x2992
Direct2D Enabled: Blocked for your graphics driver version.
DirectWrite Enabled: false (6.2.9200.16571)
Driver Date: 9-23-2009
Driver Version: 8.15.10.1930
GPU #2 Active: false
GPU Accelerated Windows: 0/2 Basic
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) Q965/Q963 Express Chipset Family Direct3D9Ex vs_0_0 ps_2_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 4
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20140716183446
browser.startup.homepage_override.buildID: 20140716183446
browser.startup.homepage_override.mstone: 31.0
dom.mozApps.used: true
extensions.lastAppVersion: 31.0
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1410022101
places.history.expiration.transient_current_max_pages: 53040
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_Brother_HL-5140_series.print_bgcolor: false
print.printer_Brother_HL-5140_series.print_bgimages: false
print.printer_Brother_HL-5140_series.print_colorspace:
print.printer_Brother_HL-5140_series.print_command:
print.printer_Brother_HL-5140_series.print_downloadfonts: false
print.printer_Brother_HL-5140_series.print_duplex: 1515870810
print.printer_Brother_HL-5140_series.print_edge_bottom: 0
print.printer_Brother_HL-5140_series.print_edge_left: 0
print.printer_Brother_HL-5140_series.print_edge_right: 0
print.printer_Brother_HL-5140_series.print_edge_top: 0
print.printer_Brother_HL-5140_series.print_evenpages: true
print.printer_Brother_HL-5140_series.print_footercenter:
print.printer_Brother_HL-5140_series.print_footerleft: &PT
print.printer_Brother_HL-5140_series.print_footerright: &D
print.printer_Brother_HL-5140_series.print_headercenter:
print.printer_Brother_HL-5140_series.print_headerleft: &T
print.printer_Brother_HL-5140_series.print_headerright: &U
print.printer_Brother_HL-5140_series.print_in_color: true
print.printer_Brother_HL-5140_series.print_margin_bottom: 0.5
print.printer_Brother_HL-5140_series.print_margin_left: 0.5
print.printer_Brother_HL-5140_series.print_margin_right: 0.5
print.printer_Brother_HL-5140_series.print_margin_top: 0.5
print.printer_Brother_HL-5140_series.print_oddpages: true
print.printer_Brother_HL-5140_series.print_orientation: 0
print.printer_Brother_HL-5140_series.print_page_delay: 50
print.printer_Brother_HL-5140_series.print_paper_data: 1
print.printer_Brother_HL-5140_series.print_paper_height: 11.00
print.printer_Brother_HL-5140_series.print_paper_name:
print.printer_Brother_HL-5140_series.print_paper_size_type: 0
print.printer_Brother_HL-5140_series.print_paper_size_unit: 0
print.printer_Brother_HL-5140_series.print_paper_width: 8.50
print.printer_Brother_HL-5140_series.print_plex_name:
print.printer_Brother_HL-5140_series.print_resolution: 1515870810
print.printer_Brother_HL-5140_series.print_resolution_name:
print.printer_Brother_HL-5140_series.print_reversed: false
print.printer_Brother_HL-5140_series.print_scaling: 1.00
print.printer_Brother_HL-5140_series.print_shrink_to_fit: true
print.printer_Brother_HL-5140_series.print_to_file: false
print.printer_Brother_HL-5140_series.print_unwriteable_margin_bottom: 0
print.printer_Brother_HL-5140_series.print_unwriteable_margin_left: 0
print.printer_Brother_HL-5140_series.print_unwriteable_margin_right: 0
print.printer_Brother_HL-5140_series.print_unwriteable_margin_top: 0
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1409338446
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.6
Version in use: 4.10.6
NSS
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSSMIME
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSSSL
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSUTIL
Expected minimum version: 3.16.2
Version in use: 3.16.2
Experimental Features
---------------------

To make sure you do not get Google Chrome and or McAfee Security Scan as part of the Adobe Flash download if you forget to uncheck, try this link instead for the latest Flash version.
http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
As you can see, different Flash for different browsers. http://www.adobe.com/software/flash/about/

How to move the photos from my boot drive to a newly installed hard drive?

- regarding iPhoto's storage, etc.... Where is the iPhoto library located anyway? And - how to transfer it to the brand new hard drive?
I want to add a ned hard drive just to keep the media there, so I would like to transfer all the GBs worth of photos (the whole iPhoto library or - what folder, really?).
What do I need to do in order to accomplish this task?, and assuming that there is no problem moving all the photos (as I understand it would mean Originals, Modified & Data) - can I then just delete the original iPhoto Library (but from where?) somewhere on my boot drive?
Basically - I want to move all the photos from my boot drive to the newly installed hard drive, and after a successful move, I'd like to delete all the same photos from its original location (the boot drive).

One addition to Larry's steps: make sure the external drive is formatted OS X Extended (journaled) and have it set to ignore ownership as seen here:
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Service of newly created database won't start if XE service already started

Hi all,
I install OracleXE 10g on WinXP SP1 and the default database (XE) is running well. Then I created a new database through TOAD but its window service won't start if XE service already started. If I shutdown the XE service than I can start the service of newly created database. This happens vice versa. When I forced to start the service of the new database with XE service already running windows told me to refer to service-specific error code 183.
But even if I'm able to start the service of the new database when I try to login using SYSTEM sometime it throws 'Oracle not available' and sometime 'shared memory realm does not exist'.
Here's my listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(SID_NAME = CASHIN)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = SOLTIUS-SETYA)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And here's my tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SOLTIUS-SETYA)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
CASHIN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SOLTIUS-SETYA)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = CASHIN)
I also check the folder %ORACLE_BASE%\oradata\CASHIN folder but I found no single file there. While under oradata\XE I found 6 dbf's files.
The reason why I created a new database is because I want to put Oracle files at another location instead of where XE files reside now.
Any help would be greatly appreciated.
Thanks in advanced.
Regards,
Setya

Then I created a new database through TOADDid you read the part in the license agreement that says XE doesn't support multiple instances?
~Jer

Online backup with redolog failed on newly installed SAP server

Dear All,
Pls check the below log which was taken newly installed SAP server .
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beflcufp.and 2011-03-14 15.32.17
BR0484I BRBACKUP log file: D:\oracle\IBQ\sapbackup\beflcufp.and
BR0252W Function remove() failed for 'D:\oracle\IBQ\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\IBQ\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file D:\oracle\IBQ\102\database\initIBQ.ora - default assumed
BR0274W File 'D:\oracle\IBQ\102\database\CTL1IBQ.ORA' not found
BR0280I BRBACKUP time stamp: 2011-03-14 15.32.20
BR0319I Control file copy created: D:\oracle\IBQ\sapbackup\CNTRLIBQ.DBF 12664832
BR0063I 17 of 17 files processed - 26652.203 MB of 26652.203 MB done
BR0204I Percentage done: 100.00%, estimated end time: 15:56
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.42
BR0340I Switching to next online redo log file for database instance IBQ ...
BR0321I Switch to next online redo log file for database instance IBQ successful
BR0117I ARCHIVE LOG LIST after backup for database instance IBQ
Parameter                      Value
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            D:\oracle\IBQ\oraarch\IBQarch
Archive format                 ARC%S_%R.%T
Oldest online log sequence     308
Next log sequence to archive   311
Current log sequence           311              SCN: 2870470
Database block size            8192             Thread: 1
Current system change number   2870472          ResetId: 745348120
BR0017E Offline redo log file 'D:\oracle\IBQ\102\RDBMS\ARC00310_0745348120.001' not found
BR0056I End of database backup: beflcufp.and 2011-03-14 15.56.43
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.43
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.43
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20110314153206 -d disk -c force -p initIBQ.sap -cds'
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.44
BR0292I Execution of BRARCHIVE finished with return code 3
Regards

Dear all,
Backup got failed pls check below logs (Note : Kernal also upgraded and ORACLE_SID
ORACLE_HOME also set .
BR0063I 17 of 17 files processed - 26652.203 of 26652.203 MB done
BR0204I Percentage done: 100.00%, estimated end time: 15:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.46
BR0340I Switching to next online redo log file for database instance IBQ ...
BR0321I Switch to next online redo log file for database instance IBQ successful
BR0117I ARCHIVE LOG LIST after backup for database instance IBQ
Parameter                      Value
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            D:\oracle\IBQ\oraarch\IBQarch
Archive format                 ARC%S_%R.%T
Oldest online log sequence     312
Next log sequence to archive   315
Current log sequence           315              SCN: 2952702
Database block size            8192             Thread: 1
Current system change number   2952704          ResetId: 745348120
BR0018I Waiting for the next offline redo log file...
BR0202I Saving space_log
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0202I Saving D:\oracle\IBQ\sapbackup\beflmnyz.and
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0202I Saving D:\oracle\IBQ\sapbackup\backIBQ.log
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0056I End of database backup: beflmnyz.and 2011-03-16 15.27.54
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20110316151050 -c force -p initIBQ.sap -cds'
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.57
BR0292I Execution of BRARCHIVE finished with return code 3
BRArchive is not done ,
Kindly advise.

SQL Server 2012 express istallation failing to install "Database Engine Service" and "SQL Server Replication"

I ran SQL Server 2012 express setup as user with administrator privileges and still it's failing to install "Database Engine Service" and "SQL Server Replication".
Any and every ideas on how to resolve this issue is greatly appreciated.

Three weeks passed and I am yet to find a fix for the the failed installation of the database engine on sql server 2012 express installation. I have tried various work-around including uninstalling, deleting all the directory paths, and reinstallation. Still
not able to successfully install sql server 2012 express.
I will greatly appreciate any and every contribution towards resolving this issue. Thanks in advance.
Here is the content of log file after the latest failed installation:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2061893607
Start time:                    2013-12-23 14:42:45
End time:                      2013-12-23 15:07:51
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name:                  mymachine1
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          Database Engine Services
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          SQL Server Replication
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012
Management Tools - Basic                 1033                 Express Edition
11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012 Service Pack 1
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\9b6607e524727c7fe1defd80\x86\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       1
Product Update Status:
Success: KB 2674319
Product Updates Selected for Installation:
Title:                         Service Pack 1
Knowledge Based Article:       KB 2674319
Version:                       11.1.3000.0
Architecture:                  x86
Language:                      1033
Update Source:                 MU
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, CONN, BC, SDK, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           <empty>
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Manual
SQLSYSADMINACCOUNTS:           MH\gt038676t
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Passed
Feature:                       Client Tools Connectivity
Status:                        Passed
Feature:                       Client Tools SDK
Status:                        Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Passed
Feature:                       Management Tools - Basic
Status:                        Passed
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Browser
Status:                        Passed
Feature:                       SQL Writer
Status:                        Passed
Feature:                       SQL Client Connectivity
Status:                        Passed
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\SystemConfigurationCheck_Report.htm

Oracle EF on SaveChanges doesn't return identity on newly installed compute

Hi,
I'm having a weird problem ... I'm using EF with my C# project . It's all working on my developer
computer and my laptop computer... but when I tried to run the app on another newly installed computer (virtual server), the identity is not returned any more ...
I've checked that EntityKey has Identity in designer and in the xml code of the model .... so everything looks ok ....
And when I run it on my machine I get back ID as expected ..... but on new machine I get 0 instead of correct ID number ...
SO it all looks like there is something other then my code influencing the behavior of the model ...
I've installed the latest ODAC and the same version on all developer machines and the same version but without VS support on new machine.... the only difference I can see is in Oracle 11g version.
Anyone had any similar problems ? Any hints where to look ?
Thanks,
Kris

Hi,
Thank you for your suggestions .... as I said ... it was working on my two computers just fine ...
I've found the problem.... ok I still can't explain why did it work on my computers and not on customer's.... and if this is really the solution or not , but it's working now :)
Here it is ....
When I first created a new entity model so edmx file .... I didn't change the default setting cause I've always updated my edmx file with an update from database ...
So what needed to be changed is two property field under 'database script generation' cause they were set to MS SQL by default ...
So by changing :
- Database Generation Workflow property - > Generate Oracle via T4(TPT).xaml
- DDL Generation Template - > SSDLtoOracle.tt
Why is property for 'database script generation' infecting identity stuff I don't know, but maybe someone else does. Bottom line, it's working :)
Thank you,
Kris

I have changed computers and installed iTunes on my new computer. I want to sync my iphone now but the "sync" program indicates that it will remove all data on my phone and replace it with the newly installed itunes that does not have my information.

I have a new computer and have installed iTunes on it.
Now I want to sync my iphone but the new itunes on the new computer wants to remove everything on my niphone and replace it with what's on the newly installed itunes data but it does not have my data.
How can I sync the new itunes with my iphone and not have my phone data wiped out?
Thanks,
hscllc

hscllc wrote:
How can I sync the new itunes with my iphone and not have my phone data wiped out?
There is no way to stop iTunes from doing exactly what it is designed to do.
The iPhone is designed to sync with one and only one computer.
If you have moved/copied your iTunes library from your old computer to your new one, then iTunes wiping your device is no problem. You would simply sync and iTunes will put all the content back.

Firefox crashes for unknown reason lately, so I removed it and reinstalled it. How can I put my Favorites (bookmarks) back into the newly installed FireFox???

Firefox crashes a few times when I was on Facebook and with email, also watching dramas online. Most of the time due to Adobe Flash and I did submit crash report. Later it crashes for unknown reason while I have email and Facebook on different tabs -- when I was on the tab of email, it looks system hang and not responding. This happened to my laptop that uses Windows Vista as I noticed. I don't remember it ever happens to my desktop that uses Windows XP.
It's pretty annoying of such known crash, but before removing Firefox, I did try to update all add-ons or plugins and it looks like doesn't work out. After updating for couple times and it still crashed like that, I removed Firefox and reinstall it.
'''Now I want to know how to put the shortcuts from my Favorite folder into the newly installed FireFox's bookmarks.''' I didn't backup the bookmarks by using Firefox. I even went to Firefox help for instructions, but it only mentions how to merge/input the bookmarks from other browsers. Please note the version I've removed and inrestalled is the same -- 3.6.13.

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

How do I get A newly installed Scanner to show up in " IMPORT "

How do I get a newly installed Cannonscan8800F Scanner to show up in " IMPORT "

What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

How to create a local SLD on a newly installed PI 7.3 system.

Hello
I wander how to create a local SLD on a newly installed PI 7.3 system.
When installing I choosed "register in existing central SLD"(other option was "no SLD destination")
On next screen I have choosen SLD HTTP host as the host I was currently installing PI7.3
For SLD HTTP port I have used 50000 as the instance was (the default) "00"
For SLD Data Supplier User I have choosen "SLDDSUSER"
I was warned then that "The SLD Server is not reachable. Choose "Cancell" to modify managing configuration or "OK" to continue. If you choose to continue you will have to execute the smdsetup script later on."
I opted "OK".
if I understand I have to execute smdsetup script in order to create a local SLD
Has anyone experience with it
thank you in advace
Jan

Hi Jan,
You first need to run the wizard to setup the SLD locally.
To do this, go to the NetWeaver Administrator -> Configuration -> Scenarios -> Configuration Wizard -> Funtional Wizard Configuration UI
There tick System Landscape Directory and select "Enable Automatically".
After executing this, your SLD will be ready for use.
The SMD has nothing to do with the SLD, it's just the next step in the installation process.
Kind regards,
Mark

Error while installing Database 10g on Linux Enterprise 5

Hi All,
When I tried to install Database 10g this error apears
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-05_12-55-24PM. Please wait ...bash-3.2$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-05_12-55-24PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
--------------------------------------------------------------

This has been documented on various places.
Install the libXp package, that is the package which contains libXp.so.6, which is missing (see your error message)
Is this x86 or x86_64?
(in both cases you need to install the x86 version (.i386.rpm))

Startup of a newly installed Database

Similar Messages

Maybe you are looking for