Variant settlement required for selected Production Orders

Hi Experts
I am using KO88 for individual settlement of Production order
Using CO88 for collective settlement
Now I need to reverse selected orders.  Is there perhaps a settlement like K08G (int order/PM)
It must be able to take a variant that I will download these Production orders?
Please help ASAP
Many thanks
Dawn

Dawn-
I know that there is no transaction code that you can use to reverse multiple production orders settlement. But, look at this program "RKO7CO88". This is the settlement program where you can plug in individual order numbers and it also has an option to select reverse settlement. I would test once in your test system before doing it in live system.
Hope this helps.
Shail
Edited by: shailender dhanasree on Nov 3, 2011 4:04 PM

Similar Messages

  • Fields required for linking production order with sales order

    I need to link production order and sales order to get the part no#. need to see in md04.

    The link between production order and sales order can be made by using the KDAUF KDPOS fields of AUFK or AFPO and linking them to VBELN and POSNR of VBAP.
    Regards,
    Rich Heilman

  • KO8G for running production order settlement

    Dear All,
    I need to use the KO8G, for running production order settlement, on a batch job.
    I found a SAP Note Number 498387 where is said that, for the selection of statuses of orders of the order category 10 or greater, will be used a status selection profile.
    Iu2019m using the status selection profile SAPPI07 on KO8G selection variant for orders.
    When I execute KO8G report, system gives me these messages:
    -     Sender 0 selectu2026
    -     Msg number KD233 : No settlement for this sender
    Someone have Idea how I can solve this problem.
    Regards,
    Helena

    Like I was written in my first message the Standard variant SAP&01, which contains values of Order type, Status of order...Created,Closed, Tech Complete, Released doesn´t work for production orders, like is said on SAP Note Number 498387.
    So I need use the status selection profile on variant selection.
    My problem is that, I've defined a Variant selection with status selection profile SAPPI07,wich has the status Created,Closed, Tech Complete, Released, but When I execute KO8G report, system gives me these messages:
    Sender 0 selectu2026
    Msg number KD233 : No settlement for this sender
    Can you help me?

  • User Exit for the Settle rule of a Production Order

    Hello all
    i got a requirement to change the settlement rule of a production order to multiple receivers.
    suppose i have the following rule
    Categeory | Settlement Reciever | Receiver Short text |   %   | Settlement Type | No | Source Assignment
        MAT             ZMDT89                   ZMDT88              100        FUL                 1            left as blank
    now my requirement is that i have to default the source assignment as 200 (Materials) so as to allow the other reciever entered with the same settlement type as FUL and also the No should be 2
    i.e. my req is like this
    Categeory | Settlement Reciever | Receiver Short text |   %   | Settlement Type | No | Source Assignment
        MAT             ZMDT89                   ZMDT88              100        FUL                 1            200
        G/L             G/L A/C no                G/L shor text       100        FUL                 2            100
    the bold one is i have to ADD
    the T-Code is CO02.
    your help is highly appreciated...
    thanks in advance

    hi,
    check these exits in co02.
    Transaction Code - CO02                     Change Production Order
    Enhancement/ Business Add-in            Description
    Enhancement
    PPCO0010                                Enhancement in make-to-order production - Unit of measure
    PPCO0012                                Production Order: Display/Change Order Header Data
    PPCO0013                                Change priorities of selection crit. for batch determination
    PPCO0015                                Additional check for document links from BOMs
    PPCO0016                                Additional check for document links from master data
    PPCO0017                                Additional check for online processing of document links
    PPCO0018                                Check for changes to production order header
    PPCO0019                                Checks for changes to order operations
    PPCO0021                                Release Control for Automatic Batch Determination
    PPCO0022                                Determination of Production Memo
    PPCO0023                                Checks Changes to Order Components
    STATTEXT                                Modification exit for formatting status text lines
    PPCO0009                                Enhancement in goods movements for prod. process order
    CCOWB001                                Customer exit for modifying menu entries
    COIB0001                                Customer Exit for As-Built Assignment Tool
    COZF0001                                Change purchase req. for externally processed operation
    COZF0002                                Change purchase req. for externally procured component
    PPCO0001                                Application development: PP orders
    PPCO0002                                Check exit for setting delete mark / deletion indicator
    PPCO0003                                Check exit for order changes from sales order
    PPCO0004                                Sort and processing exit: Mass processing orders
    PPCO0005                                Storage location/backflushing when order is created
    PPCO0006                                Enhancement to specify defaults for fields in order header
    PPCO0007                                Exit when saving production order
    PPCO0008                                Enhancement in the adding and changing of components
    reward points if hlpful.

  • Planning for requirement after TECO production order

    Hi, I would like to understand how do I plan the remainder of an independent requirement if the production order sourcing it is TECOed.
    The scenario I'm proposing is the following:
    - There's an independent requirement for a given quantity (e.g. 100 tons) and there's an associated production order to fulfill it. Production has already started and goods receipts have been made for partial quantity (e.g. 50 tons)
    - The production order is TECOed but I still need to re-plan for the remaining 50 tons
    how does the fact that part of the independent requirement has been  partially fulfilled impacts my re-plan? how does the system knows that I have to plan for 50 and not the original 100?
    Many thanks,
    Diego

    Diego, assuming that you are working with a make to stock strategy (i.e. delivering from anonimous stock), after GR of 50 Tons and TECOing the production order, there is a negative balance between IndReq(-100) and stock (50). So, the MRP will create a new planned order for covering the demand.
    If a delivery is made from the stock, then the sales order will reduce both IndReq and stock and the balance still remains.
    Hope this help you...
    Regards

  • In house mfgd. raw materials for a production order- Cost capturing

    Hello Experts,
    The scenario is as below:
    Client wants to manufacture in house some of the raw materials for a production order of sub assembly. These raw materials are made from scrap, with some manhours spent on it. After making them in house, these are handed over to stores for kit preparation.
    The planner wants to create a stock of these materials (without making individual prod. orders since there are many of these). One option is, planner can do the cost centre issue reversal (202 movement). But the raw material cost is also getting captured in it from the material master.
    From costing point of view, the cost of raw material should not be included since it is made from scrap. Only the cost of man hours spent is to be accounted for.
    Please help as to how to map this scenario. For capturing cost of man hours spent, we can include a routing for it in the production order of the sub assembly. But how to eliminate or exclude the material cost. All inputs from your side are appreciated. Thanks in advance
    Regards,
    Chetan.

    Hi Chetan,
    Your scenario has some major issue.
    1. You cannot produce RAW material in SAP.
    2. The cost of material produced inhouse will be different than that of original RAW material.
    3. There will be some cost effect in the final finished product if you consider this inhouse produced material for product costing of finished goods.
    We have similar scenario with my client and here is what I have implemented.
    1. Create a new HALB type part number for the inhouse manufactured RAW material. This will ensure that you assign Routing and BOM to same and can capture the COST for the same.
    2. Creating new material will enure that the product costing for inhouse produced RAW material is done.
    3. You can create single Production order for the same as you only have to capture cost. This depends on your Business scenario.
    4. Once you have inhouse produced raw material, you can create alternate BOM for the FINISHED Material with this new Part number in BOM.
    5. Create Production Version for the two BOM and ask Planner to select the Version 2 if he requires new part number in Production Order. I assume that this case would genrally appear in very small numbers.
    6. Now coming to product costing for final assembly. Since we are going to reuse scrap material to create the new part number, only activity cost and component cost will be used to determine cost. This cost will be less than that of RAW material cost.
    So we always suggest our customer to consider OLD part number to determine the PRODUCT COST of final material. BUT business will have to take a call on this.
    Do let me know if u need any thing else.

  • For a Production order - Operation wise Inspection Lot

    Hi Experts,
    Please help me out to resolve the following problems.
    1. How can we create inspection lot for each operation for a production order?
    If a production order has 10 operations, I will have to have 10 inspection lots for that order.
    2. I have a final assembly called A with components B & C. Some other material called D has similar characteristics of B.
        But sometimes, for A, instead of B (if stock is not available), i want to use D also. Please note that, if B is not available, then
        only, I will use D. Otherwise always B only, so we cannot go with probability.
    How can we map this scenario? and MRP run also should consider D if B is not there.
    Thanks in advance.
    Regards,
    Vijay.

    Dear
    Answer Q1 : Go to SPRO > Production> Shop floor control> operations > confirmation> define confirmation parameters
    Maintain
    1)Operation sequence u2013 error when operation sequence is not adhered to
    2) Over delivery u2013 Error when over delivery tolerance is exceeded
    3) Results Rec. (QM)- Error message if no Insp results exist
    So what these setting helps is that  :
    1)All operation has to be confirmed operation wise means 0010 has to be confirmed for confirming 0020 operation. SO production guys can only confirm 0040 operations only after 0030 operations is confirmed by quality personal.
    2)Over delivery is not allowed means of in 0030 operation if only 50 quantity is confirmed in 0040 operation only 50 can be confirmed. Production people cannot confirm more than 50 quantities
    3) Also PP personal cannot confirm operation 0030 through C011N till the result recording of that operation is done through QA32.
    4)Maintain Operation Control Key -PP01 with marked Inspection Character Marked -OPJ8  and maintain this Control Key for   those operation which are required for Inspection Lot .
    Now For QM stand point , activate inspection type 03 and 04 in material master. For 03 type of inspection, you have to make routing in CA01. So when you release your production order, an inspection lot will be generated. This lot will not be stock relevant. This is just to check that you production is in accordance with quality norms. Only after clearing this lot from quality you can do your order confirmation, otherwise system will give hard error due to 3rd point of prev post.
    For 04 type of inspections, prepare inspection plan in QP01. Now when order is confirmed, an inspection lot of 04 origin will be created in quality, and this is stock relevant and for final inspection of production order material.
    If you need you can set for early inspection as well. That will give you another intermediate stage before final inspection. Inspection points are also an option if suites your requirement.
    If you need more inspections, I suggest go for manual inspection lots of 04 origins, they are created in ref to order and are not stock relevant.
    Q2 : Please explore this thread for options explained for Alternative Item selection .
    Alternate Item in BOM
    Regards
    JH

  • BAPI for Open production orders

    Hi All,
    Any BAPI for open production orders?.... Using BAPI i want to upload open production orders informatiomations.... Please help
    Thanks & Regards
    Santhosh

    Hi,
       Please check the following BAPI,
    Goto BAPI tcode, select hierarchical tab
      Production orders,ProductionOrder ,ProdOrdConfirmation , RCVPRORDCF and check the BAPIs

  • Open the reservation for the Production order

    Hi,
    I have post the GI for Production order MB1A with movement type 261 from 100 peaces components. I would like to cancel a partial quantity of components from this posting (about 30 peaces). After cancel it the reservation for the production order has to be open for 30 peaces of components.
    I've canceled it through MB1A and mtype 262 but the reservations weren't open and in the PO (component overview there is always the sign"the Final Issue for This Reservation").
    Which T.code and mtype could I use.
    Thanks
    Dede

    Hi,
    Have you cancelled the movement (of 30 pieces) by selecting the "with reference" option from the menu?
    If not, then reverse the current cancellation document. Then again cancel the 261 movemtn by selecting the with refernce button from the menu. It will sove the problem.
    Check & revert.
    Regards,
    Rohit.

  • BAPI - Goods receipt and then create transfer order for a production order

    Hello Everyone
    We need to do goods receipt and then create transfer order for a production order (Material for WM scenario)
    We are using BAPI 'BAPI_GOODSMVT_CREATE'
          i_items-orderid = wa_afpo-aufnr .
          i_items-order_itno = wa_afpo-posnr.
          i_items-mvt_ind = 'F'.
          i_items-stge_loc   = wa_afpo-lgort.
         i_items-stge_type = '901'. "wf_styp.
         i_items-stge_bin = wf_sbin.
          i_items-entry_qnt  = wf_qty.
          i_items-entry_uom = wa_afpo-meins.
          i_items-entry_uom_iso = wa_afpo-meins.
          i_items-batch      = wa_zmobtag-charg.
          i_items-move_type  = '101'.
          i_items-move_reas  = wl_3131.
    We are passing i_items (like line of goodsmvt_item) along with other parameters to BAPI and its creating material document and Transfer order automatically. Problem is the TO created is showing destination storage bin as default storage bin( from material master).
    The field goodsmvt_item-stge_bin is just changing the Source bin details. There is no field for bin in the BAPI so that we can change the Destination storage bin as per our requirement.
    My requirement : Creating material doc and then TO. Material should move to specified storage bin.
    Please let me know any alternate way( No BDC) so that my requirement is achieved.
    Regards
    Swetabh

    Hi ,
    can u check these fields ,
    STGE_TYPE_PC     UBTYP     CHAR     3     0     Storage type for transfer posting
    STGE_BIN_PC     UBPLA     CHAR     10     0     Storage bin for transfer posting
    Regards
    Prabhu

  • Multiple batches for a production order and mapping with components

    Hello Gurus,
    Our business requires to create multiple batches for one production order + they want to trace which component in the production order has been issued to the main equipment.
    For example, I am creating production order for 'A' equipment for 4 qty. Business wants to create 4 different batches for these equipment
    Lets say now 4 batches are created A001, A002, A003 and A004.
    Now lets assume 2 nos of 'B' component are required for 1no of 'A' component. So the requirement of B component is 8.
    Lets say 8 batches are generated B001, B002 ......B008
    Now lets say batch B001 and B002 are issued for A001 and packed together. How do we map this?
    I understand we can do some enhancement for creating the multiple batches but I still dont know how to map them with each other.
    Please help

    Hi Ethan
    There is a functionality called WIP batches, that allows you keep the batch traceability within an order.
    With WIO batches you can track which batch of component was used to produce each batch of finished product.
    See this link for more details:
    Work-in-Process (WIP) Batch - SAP Library
    BR
    Caetano

  • Alert message(Query) for a Production order?

    Hi Experts,
    I want to get an alert message for the production order doucument based on the due date of it. The user must get the alert a  one day before the duedate of the document. How to write the Query for it? Urgent ,waiting for earliest reply.
    Regards ,
    Magesh.

    Create a Formatted Seach with the following Query
    SELECT T0.DocNum AS 'Document Number', T0.CreateDate AS 'Creation Date', T0.DueDate AS 'Due Date'
    FROM  [dbo].[OWOR] T0  WHERE DATEDIFF(Day,GetDate(),T0.DueDate) = 1
    Then, Create an Alert from Adminis..> Alerts Management and Give a Name, Click Open Saved Query, Select the query you saved, Tick the Int. check box against the user who gets the Alert.  Check Active. Select Frequency.
    Good luck
    Suda

  • Need transaction similar to KKBC_ORD but for multiple production orders

    HI all,
    Have been scouring the system looking for a report which displays production order variance information for multiple production orders.
    The best way to describe what we need is KKBC_ORD but with the option to select multiple production orders or a range.
    This transaction gives us exactly the results we want, but we have a long list of orders to analyse and to be able to get a list of them all rather than have to go into each individually would be fantastic.
    Do you think we're looking at a custom development here ?
    Regards
    Helen Smith

    IN these situations, I have sometimes written a "wrapper" program, with a Z version of the transaction....Get the list of documents via user input to your selection options, then loop at that pick list and do a call transaction for each document.

  • Target cost for a Production order

    Hi
       How to get Target Cost for a production order?
    Thanks
    Naga

    Well Naga, Right now I’m on HR implementation , but I programmed same kind of requirement two years before , but I got planned cost and actual cost .
    I also notice “cost analysis" the cost is not exact , it wont read the value from KP26 of that particular month .
    Here I am talking about 4.5b system.
    You can find the sales order ref on production order, and your production order is made up of your different kind of material like scarp, raw, semi-finished etc
    Here are the steps I followed .
    1- I read the material which you can see in material component on production order in Co03.
    After that I take the qty and also multiply by the cost at which machine is posted .
    I have that programs, as I need to find out . I’ll post you later .
    But you have to read the tables afko,afpo,afru,caufv,cost ..etc
    Do you see information structure I refer you , If i am not wrong this CO3 ( cost analysis ) report use report painter ( Tr.Gr51,Gr52 ) . you can also see by going in to said transaction which information structure its populating . This’ll also help you.
    Hope this’ll give you idea!!
    <b>P.S award the points.!!! DOn`t forget :)!!!!</b>
    Good luck
    Thanks
    Saquib Khan
    "Knowledge comes but wisdom lingers!!"
    "Some are wise and some are otherwise"

  • How to create a Reservation for my production order

    Hi,
    I have a production order for that I need to purchase 2 materials. but my problem is when the material come there is no reservation for my production order. someone can take it for another production order. How can I do that the system create a  reservation after the GR
    Thank

    Dear,
    When you create and release production order, the reservation is created for that order. Now you should first activate the Avelability check in production order.
    It is PP configuration
    Then you need to activate dynamic aveailability check in goods issue in MM configuration.
    Hence if the stock is reserved for your production order, then no one can issue and system will give error message.
    please come back if required.

Maybe you are looking for

  • IPad Photo App resets to "Apple" Screen while scanning thru Pictures

    The iPad resets to "Apple" Screen when scanning photos in the Saved Photos Stack. Unit takes several minutes to return to Unlock Battery Screen. Any ideas or is this a Bug in Photos ?

  • CS4 crashes with OSX 10.8.5

    I got a new computer: Processor Name:          Intel Core i7   Processor Speed:          2.3 GHz   Number of Processors:          1   Total Number of Cores:          4   L2 Cache (per Core):          256 KB   L3 Cache:          6 MB   Memory:        

  • MUVO2 5GB FM FREEZES

    Hi All,?I am only able to load tracks onto my Muvo2 in safe mode in XP because if I try to load it in normal XP the PC freezes up and trying to disable it with Task manager sometimes fails to shut it down. Sometimes just clicking on My Computer is en

  • HT1688 the activation server is temporarily unavailable

    My imei number is 012575006020744 I unlocked my phone but I have this Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again i a couple of minutes

  • New MBA in Apple Retail store in NY

    Hi Guys, I'll be travelling to NY the coming week and would be interested in purchasing the new MBA 13" in the Apple store in 5-th Avenue or Soho store. I would be interested in buying the 2.13/4GB/256GB version. Can anyone who have been in any of th