Static setting the lwapp AP ip address

Is there any way to set the static ip address to lwapp AP? If I have changed the controller management ip address, The lwapp AP is not discover and join the controller without DHCP server. right?
I have tried to set lwapp AP ip address by console, but failed. Is any good idea?

Hi Ankur,
I have tried that way, but failed.
But I have found description below about lwapp AP ip address configuration on cisco web site.
"The access point stores the address in
NVRAM so that the static address is preserved across a reboot or power cycle. This is important to remember because an access point static IP address can only be changed through a WLC interface. If you move a statically addressed access point to a different IP network, it will not be able to forward traffic."
If i have to change lwapp AP's ip address, the WLC is needed.
Anyway, Thanks your support.
Regards,
Yong

Similar Messages

How to set the IP and MAC address in C program?

My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
Any idea is welcome! Thanks!

Hi
As a simplest possible solution, you can use the system command
to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
Or you can use the DLPI calls ( do a man DLPI or search for a
Sun documentation on the same at http://soldc.sun.com) to write
a pure C program.
HTH
Shridhar

Setting the default respond email address in Yosemite Mail

In Mavericks I was able to set the default email address to my new address when I was replying to mail sent to me using an older address I am transitioning from. However this behavior got changed after installing Yosemite. In Mail Preferences -> Composing I do not see any place to create a default email address when responding. Only for new mail. I was wondering if it is possible to change this via command line in Terminal?

Whichever account mailbox is currently selecting in the mailboxes drawer will be the account used when selecting New to compose a new message. If no account mailbox is currently selected, the first account listed in the account's window at Mail > Preferences > Accounts is the default email account.
Tiger Mail includes a true default account selection for "Send new mail from".

How do I re-set the Firefox home page address.

''dupe of https://support.mozilla.org/en-US/questions/910351''
It has taken me days to find a way of contacting someone at Firefox to help an avid fan (Me) to get this far so I really hope you can help me.
I downloaded Firefox Aurora about 10 days ago but had a problem with my PC so I reformatted the drive “C” back to zero and now I can’t get Aurora back as it was.
It had the inspiring dark globe with a wonder of options to choose from but I now get the same globe with a great clean and fresh page to start with but a very annoying address that says only “about:home” can you please send me the correct address that should be showing and not a drop down that says “This Website does not supply identity information” If I download My favoured E-Mail client “Incredimail” It will take over Firefox with it’s horrid “MyStart” and the only way I can restore Firefox home page is if I have the correct address. Just encase you identify users by country I live in South Wales U.K.
Thank you
…Chris Thurlow…

It was normaly me who asked this Q the firt time but I was re-directed to ask again after filling in and joining the forum. The Q is not yet resolved. Give it time Firefox is worth waiting for.

How to set the AE lan IP address to 192.168.10.10

Hello,
The DHCP range is set to 192.168.10.200 to 250. Everything works fine except the AE sets itself to 192.168.10.1.
Can this be changed to 192.168.10.10?
Thanks

You might.....or might not....want to let Apple know.
Apple - AirPort Express - Feedback

Static IP for LWAPP Device

Is it possible to assign a static ip to a LWAPP device?
The reason for it is because one of our remote offices does not have dhcp enabled (due to 3 people being there).
If it's not possible we can always setup a dhcp server there, but hoping there's a way to statically configure a LWAPP's IP address.
Thank you.

Yes you can have a static ip.
Thanks,
Scott Fella
Sent from my iPhone

Howto change the Sender/Reply-to address and name in the broadcaster

Hello,
When I create a broadcast setting; the username and email address of the creator are used for the broadcaster.
Now I created a group account for broadcasting the reports. However, I don't want the recreate the broadcastings again, but only change the return address/name and/or the sender.
Regards,
Ernst

>
Suzanne Gravelle wrote:
But what I am trying to change is the 'from' that shows in the e-mail. I believe that is controlled by the 'owner' and not the authorization user.
correct
>
Suzanne Gravelle wrote:
So, I have to change the RSRD_SETTING. I can't go in and change a line though, the change option is not available (it was available for table RSRD_SETT_NODE_A. Should that option be active?
SAP doesn't like you to "change" table entries just like that (and that's pretty obvious too), so it's normal that the "change option" is not available. That doesn't mean you cannot change the entry though... question is just why would you change it? Especially the "owner"? Anyways, in a program you can change the table entries using the correct commands. If you have a clear logic & cannot do it any other way, than that's the way to go forward.

PowerShell: How do I reliably set the IP address on an interface when the interface is not connected ?

Hello all,
I am in a bit of a bind - no pun intended. I would like to know how to reliable set the persistent IP address of an interface that may be disconnected when the address is set. I can set an address and it will be stored in the ActiveStore but
that does not really help if I need it next time I reboot. I have tried using netsh and WMI but they don't seem to create a persistent address on the disconnected interface. Now if I us ncpa.cpl I can do it all day long so it must be possible.
In fact if I do it that way the registry settings change. So, I figured I would go that route (modifying the registry) but, alas, that does not work either - upon reboot the address shown in the interface properties show a blank IP address, gateway,
and netmask. It is interesting that it is using a static address though.
Thanks for your help
Robert
Robert Thompson

Look in the Gallery for numerous examples of setting a static address on an interface.
http://gallery.technet.microsoft.com/site/search?query=static&f%5B2%5D.Value=static&f%5B2%5D.Type=SearchText&f%5B0%5D.Value=networking&f%5B0%5D.Type=RootCategory&f%5B0%5D.Text=Networking&f%5B1%5D.Value=clientside&f%5B1%5D.Type=SubCategory&f%5B1%5D.Text=Client-Side%20Management&ac=2
¯\_(ツ)_/¯

HT204053 I need to change my i cloud e-mail address to the same one I set up when I purchased my apple account I just created an I cloud address and when Ijust read the set up for I cloud it says I should use the same e-mail address that I started with H

I did not know that when I created a e-mail address that I was suppose to use the same one that I created when I first signed up with Apple I phone. I want to change my e-mail address to the one I first had How can I change it? I do not need two e-mail accounts It should have read that when you are setting up an e-mail address use the one that you first signed up with. Not after you go through all the set ups for I cloud it tells you at the end to use your account that you first started with. Can you please help me I am new at this and I still can not set up on my computer with my phone to I cloud so if I had my phone stollen I can find it I also have and I pad to set up yet It is 3 days and I still can not set it up
Thank You and Hoplefully I can change my e-mail address so I can have everything on one account

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

On my iphone, icloud is set to an apple id that i no longer use and i keep getting asked to enter a password. Cannot remember the password. When i try to re-set the password, it sends a email to a address no longer used. Will not accept any dob i enter

I have icloud on my phone with an apple id that I no longer use. I keep getting asked to enter the password for this ID. However I can't remember the password.
When I try to re-set the password, a e-mail will be send to an address I no longer use and can't access.
I then try to answer the security questions, but the date of births I enter are not accepted
Any ideas?
Paul

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to set my new one up is that the Apple ID is already in use. How do I set up with our shared e-mail account

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you

1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279)

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

I setup my iCloud account on my iPhone 5 with the wrong e mail address, and I don't remmber the password, I reset my tel and erase all the information on my iPhone in order to try to set up a new iCloud account but when I restart I have a problem aga

I setup my iCloud account on my iPhone 5 with the wrong e mail address, and I don't remmber the password, I reset my tel and erase all the information on my iPhone in order to try to set up a new iCloud account but when I restart I have a problem agaIn , they ask me to put again the old iCloud user account and password, what I can do in order to start the phone when I don't have the correct e mail and I don't remmber the passcode.?

I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?

Im having problems with my Kids facetime accounts that seem to be because they are both using my itunes and there are conflicts with multiple email addresses? Is it possible to now set the kids up with their own accounts without losing their apps etc

Hi All,
I have my kids using iTunes via thier ipods etc through my own account and this hase been the case for some time?
This has started to cause issues lately with imessaging and facetime, as there seems to be a limit on email addresses that can be associated with one account?
I wonder if I would be best off setting the kids up with their own accounts, but want to be able to do this without them losing their existing apps, music etc?
Is this possible, if so is there a simple process cos I can seem to find anything relating to this?
many thanks, Jim

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Static setting the lwapp AP ip address

Similar Messages

Maybe you are looking for