Station options not copied to deployment

In my .tsd file I checked Deploy files in TS public directories as I had been told this would cause station options to be copied. However my cfg directory preference does not come across. We use a custom location instead of the default for the cfg directory so we can place it with the rest of the version controlled software. The source directories on the development machine are different then the deployment directories but I don't think this has not been a problem in the past.
Any ideas?
Thanks,
jh

Hey Hoss,
I am not sure that I am clear about your setup, but if you are developing a sequence file through SVN, you should do the following:
Create a workspace with all dependent configuration files, sequence files and libraries (I have attached a screenshot of what this would look like). You should then upload this to SVN and allow users to make changes to files through the workspace. Once you are ready for deployment, you can download the workspace file and deploy using the workspace option. You should never replace altered configuration files with the original configuration files in your development environment, as this will affect all future development.
Having said that, if you are considering changes on a test station that has already been deployed to, you can replace configuration files once they have been altered.
Please let me know if I have thoroughly addressed your question and I hope you have a great day!
Regards,
Jackie
DAQ Product Marketing Engineer
National Instruments
Attachments:
TeststandWorkspaceFile.png ‏32 KB

Similar Messages

I can't get download to work - it will not copy the mp3 file to my chosen location (as set in tools/options) - it gives me a new window with a player - no dwnlo

I am running windows xp sp2 and I have set my dowload location under (tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my chosen location on my HD - instead, it opens up a new window with a makeshift "player" and begins loading the player with the MP3 file. The problem is that I have no idea where on my system firefox has copied this file to, so, I cannot leave and come back later and play this MP3 file using winamp. I have to listen to it right then or lose it - if I close that new window (with that puny little "player"), then I lose the download, wherever firefox put it on my PC (I got no idea where it is). This is all under firefox 25.0
I am also running FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file I want, and firefox 12.0 (on win2k, sp4) downloads it to my chosen location (on my HD), and it gives me the download window so I can watch its progress and have some control over pause, and resume, and, when it is done, the download window offers me the option to "open containing folder" so I can make sure it got to where I wanted it. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox 25.0 on winxp sp2!!!!! What gives? I went through and set up my options for XP just like I did with Win2k and it all looks good, but firefox 25.0 just ignores my chosen location and always defaults to give me that makeshift player and I am not able to actually copy the mp3 file to my harddrive - it makes firerox 25.0 almost unusable since downloading mp3 files is a big part of my firexfox use - please help - I am not able to upgrade windows at this time, and, since firefox 12.0 still works fine on win2k, I can't understand what happened at firefox?

Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry

Option to "copy photos to a new location" not available

LR 2.7, Mac
I regularly use the import from catalog command to merge catalogs. Most of the time I want to move the images, so I usually select the option to “copy photos to a new location” going e.g. from laptop to desktop.
Occasionally though that option does not appear on the drop-down menu. If it was selected previously upon importing from a catalog, the menu will show a blank entry. If one goes ahead with it looking like that, the computer will hang until one cancels the operation; no images will have been copied.
It just happened again this morning. I had started up the laptop in target disk mode, but LR woudn't let me select to copy the new images. A copy of this particular catalog on an ext. HD wouldn't work either. A copy on any of the internal HDs did work fine though. (I've ruled out permission problems.)
As a workaround I then usually export the catalog from the laptop onto one of the internal HDs and import the catalog from there.
What puzzles me is that most of the time it works fine and there doesn't seem to be any pattern to it.
Anyone seeing this or having any ideas?

You can reset the browser.newtab.url pref on the <b>about:config</b> page via the right-click context menu to the default value.
You can open the <b>about:config</b> page via the location bar and you can accept the warning and click "I'll be careful" to continue
You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160?

Sometimes right clicking on a image provides the option of copying or saving it and sometimes it does not

sometimes right clicking on a image provides the option of copying or saving it and sometimes it does not even with the same image. I even saved the page because I could not save the image then when I right clicked again I could save the image. There is no pattern to when I can or can't save the image. Using Firefox 31.0 under MS Windows 7

What kind of context menu do you see instead?
You can right-click such an image and use Inspect Element to open the Inspector to see what gets selected instead.
*https://developer.mozilla.org/Tools/Page_Inspector

TS1702 I am trying to install an app, I'm asked to enter my password, but my keyboard won't pop up, only the option to paste, but when I choose paste, nothing fills in (which makes sense as I have not copied anything). How can I make my keyboard appear?

I am trying to install an app, I'm asked to enter my password, but my keyboard won't pop up, only the option to paste, but when I choose paste, nothing fills in (which makes sense as I have not copied anything). How can I make my keyboard appear?

Are you tapping on the field you want to enter data into? That opens the soft keyboard. If you touch the field and hold it, the paste option will appear.
Barry

Copy control option in web ui-physical product not copied from oppertunity

I am making quotation from oppertunity by using follow -up document functionality in WEB UI, but when I select the quotation transaction type in follow-up then header data got copied but physical product from oppertunity not copied into the qotatio.
Follow up functionality working properly in GUI.
I need help in Web -ui.

Hello Leon,
There is a standard process of Copy Control to copy the data from Interaction Record to activity but now my client requirment is to copy the data from Activity to Interaction Record.
In Detail - when user select the activity from Agent inbox and clicks on Edit button then IR gets created in background then at that moment i need to copy the Notes & Description from Activity to IR. Even we can check if can copy it when user clicks on END button after edit the activity.
can u tell me how can i copy this data? i tried with copy control but couldn't work.
should i write some code? if yes then where i can write?
Regards

Changing station options programmatically

Hi
I am trying to change the Station Options programmatically (in a TestStand seq) rather than via the dialog. In particular, I want to change the "Immediately Goto Cleanup on Sequence Failure", although I will probably also want to change other options later.
I have succeeded in:
Getting the ConfigFile (PropertyObjectFile) using the Runstate.Engine reference
Getting the Data (PropertyObject) using the Configfile reference.
Setting "StopOnSequenceFailure" using SetValBoolean with the Data reference.
Saving the changes to TestExec.ini, using SaveFileIfModified with the ConfigFile reference.
However, the change only takes effect when TestStand is restarted, and does not show up in the StationOptions dialog (until a restart). Using the dialog, I can change the setting while stepping through a sequence, and it takes effect immediately, so there must be a way to do this from within a sequence.
How do I "refresh" TestStand's "copy" of the variable?
Thanks
(I am using TestStand 2.0.1.)
Message Edited by Jan0 on 09-30-2005 02:50 AM

Jan,
What Version of TestStand are you using?
I assume you are using the TestStand API.
You can get a reference to the StaionOptions Object from the Engine.
StationOptions Property (Read Only)
Syntax
Engine.StationOptions
Data Type
StationOptions
Purpose
Gets a reference to the StationOptions object.
Remarks
Use the StationOptions object to set preferences for your TestStand station. Station option settings affect all sequence editor and operator interface sessions that you run on your computer.
See Also
StationOptions
Check TestStand Help.
Usin this reference you can access most of the options present in the station options dialog.
I hope this helps.

Will Not Copy After Being Idle

THIS IS A COPYING ISSUE!!! After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print. I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem. Consequently, we purchased a new HP 5740 printer The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work. If you then turned the printer off and immediately turned it back on, it would copy. Again, Comcast reiterated it was a printer problem. I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer. After hooking up the second HP 5740, the same problems with copying occurred. I returned the second HP 5740 to the dealer for a refund and left town for three months. We recently returned and purchased a HP ENVY 7645 printer from another dealer. We are having the same issues with this printer as we had with the two previous HP 5740 printers. I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician. The installation occurred today and we are still experiencing exactly the same problem. The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy. He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem. DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

Hi @lamoso,
Welcome to the HP Forums!
I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
Let's see what happens after giving these two steps a try!
Thank you for posting!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP LaserJet 1536dnf MFP will not copy or scan but does print

My HP LaserJet 1536dnf MFP will not copy or scan but does print. It does not matter if I use the ADF or the glass. When copying or scanning I get a completey black page. The light bar does move from one end of the printer glass to the other. There are no connectivity issues as the printing function and the e-print function work fine.
Thank you for your help

Hi @akb3,
I understand that when you try to scan or copy, you are getting a black page. I can help you with this.
Please keep the scanner lid open and then press the copy button.
Check if the scanner bulb glows.
Check if the scanner moves freely across the glass.
If it does not try connecting the printer directly to the wall jack and try again.
Update the printer's firmware if the bulb glows and scanner moves freely. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
If the issue persists, then I would recommend to call HP Tech Support for further assistance to see what other options are available for you at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

Why won't the copying action stop? How do i quit it so i can shut down? Items i tried to copy to either my hard drive or my USB memory are not copying - why? And now can't quit them either!

I have a Western Digital My Book hard drive which i use to store my media/data/back up. I tried to transfer some files on my desk top to it yestrday and it was taking forever so decided to stop it. Now it just shows under the Copying box, stopping but it isn't? I tried then to down load the same images t my USB memory stick and now that is doing the same. I wonder if i is to do with upgrading to Mavericks as no problems before?
I have check my WD My book on another computer and thankfully all mmedia is still in tack!
How can i quit this copying so i can shut down my computer?
Any ideas as to why items are not copying to external memories and what if anything can i do to get it copying correctly again?
I really need to back up my work by tonight - help! Any suggestions there too?

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

Images I move from one folder into another are disappearing, at first it was occurring immediately if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location.

Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?

Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best

TS2776 I purchased an Itune Audio Book using a borrowed Windows Computer and Downloaded the book to that Computer. I than tried to sync to my IPod Nano (7). I received an error Message " THe [title] was not copied to the Ipod [name] Becuase you are not au

I purchasd an ITune Audio Book using a borrowed Windows Computer. After the Download I attempted to Sync and was told that I was synced to a different [something]. It then asked if I wanted to sync to this [Something] I said yes. IT wiped all the stuff off my IPod then gave the following message:
The [title] was not copied to the iPod [name] becuse you are not authorized for it on this computer.
How can I get this to work?
It considered the computer pretty acceptable when it took my money for the title. I think I have been ripped off.
THis whole SYNC is an innecessay step. Why can't I just download stuff to my iPod (from any sourch by the way) and delete it from my iPod when I don't want it any more.

Hello LeaMinovitch,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
To authorize a computer, follow these steps:
Open iTunes.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
In some cases, iTunes may ask you to authorize the computer again. iTunes should use the same authorization as before if the computer is in your list of authorized computers.
Learn what to do if iTunes repeatedly asks you to authorize when you try to play your content.
Best of luck,
Mario

How can I solve this error message? Some of your photos, including the photo "IMG_0374.jpg", were not copied to the iPad "(my name's) iPad" because they cannot be displayed on your iPad.

how can I solve this error message? "Some of your photos, including the photo “IMG_0374.jpg”, were not copied to the iPad “(my name’s) iPad” because they cannot be displayed on your iPad."
There were 273 photos in the event syncing from my Mac, but only the last 103 made it to the ipad. Most of the photos were taken by an iphone. I would appreciate any thoughts or insights - thanks.

Adrian-
That error message suggests the photo is somehow corrupt.
Do you have the Apple Camera Connection Kit? You can set up a USB thumb drive with MS-DOS FAT-32 format and copy your photos to it into a folder named DCIM. Assuming they have an 8 character plus suffix name, the iPad will recognize them and give you the option of transferring them via the Kit's USB adapter.
Once they are transferred, you can find out if there is a problem with any.
Fred

Station options not copied to deployment

Similar Messages

Maybe you are looking for