Stationery Template Problem

I am currently using my own template in stationery on mail, which works great. however when i send it out to people they receive only the text and the actual template comes out white with a lil' blue box with a question mark in at the header and footer.
hope you can help ive never used forums so hope i have gone about this in the right way.

SWEAT1 wrote:
I am currently using my own template in stationery on mail, which works great.
Doesn't sound like it.
however when i send it out to people they receive only the text and the actual template comes out white with a lil' blue box with a question mark in at the header and footer.
So you mean stationary or a signature? How did you create this template? What e-mail program are the recipients using?

Similar Messages

  • Problems using the 'stationery template' feature in mail

    I have used the stationery templates feature in mail without any problems in the past. Now when i send a stationery template, like a photo template, the email is unreadable for the people receiving my emails (both Mac & PC). Sometimes the email looks like a Picasso painting or the receiver gets a bunch of attachments as if the email came in a bunch of separate files. Could this be possible due to the upgrade to 10.6 from 10.5? Or am i doing something wrong? Is there a separate upgrade for this?
    thanks

    I have used the stationery templates feature in mail without any problems in the past. Now when i send a stationery template, like a photo template, the email is unreadable for the people receiving my emails (both Mac & PC). Sometimes the email looks like a Picasso painting or the receiver gets a bunch of attachments as if the email came in a bunch of separate files. Could this be possible due to the upgrade to 10.6 from 10.5? Or am i doing something wrong? Is there a separate upgrade for this?
    thanks

  • Stationery Template - appearance breaks when recipient opens

    I've tested several Mail Stationery Templates. They seem to break their formating when I send them to non Mac users (my mother). When I send a test email to myself it looks fine. Any solutions or suggestions? Wish I could attach my mom's reply to show the problem. Very disappointed in this shortcoming. Am I loading the mail message with too much information (photo, text, fonts, color)?

    Yes, and the worst:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=424&sid=ba144f60f149 4f75c94316b0c7fbff2b&mforum=iworktipsntrick
    If you had Pages previously it should be in your Applications > iWork folder.
    Peter

  • Installing New Mac Mail Stationery Templates

    I'm trying to install a custom stationery template into my Mac Mail which I believe should be placed here.
    Library > Application Support > Mail > Stationery > Apple > Contents > Resources > Custom > Contents > Resources
    However, there's no "Mail" folder within my "Application Support".
    If you have any suggestions, I'd be most grateful.
    Thanks, in advance.

    Back to the original problem:
    I'm trying to install a custom stationery template into my Mac Mail
    Who from, and did they provide an installer?
    The reason I ask is that I recently downloaded and installed a set of stationery templates for Mail from
    http://www.jumsoft.com/stationery/
    They work perfectly. The installer put them at the location I mentioned, but I have no idea whether the installer created that subfolder where I found them.
    Worth checking.

  • [URGENT] Ques::custom Template Problem in IF statement?

    kindly help me out in solving this template problem...
    this is what i have written for my JHEADSTART Template.. where i recieve error.
    #if ( #WIZARD_PAGE_LIST_BEAN().selectedStep==3)
    <af:panelPage title="#if (!${JHS.current.group.hasTreeLayout})#PAGE_TITLE()#end" id="panelPage" partialTriggers="CreateNewEquip_AccSpcEquip">
    #else
    <af:panelPage title="#if (!${JHS.current.group.hasTreeLayout})#PAGE_TITLE()#end" id="panelPage" >
    #end
    i want to check if wizard step has value 3 then corresponding line showed be executed....
    NEED URGENT REPLY... THANKS

    [CreateNewEquip_AccequipmentDefinition.jspx] org.apache.velocity.exception.ParseErrorException: Encountered "#WIZARD_PAGE_LIST_BEAN" at line 37, column 7.
    Was expecting one of:
    <STRING_LITERAL> ...
    "true" ...
    "false" ...
    <NUMBER_LITERAL> ...
    <IDENTIFIER> ...
    Kindly let me know the Right expression for it ...

  • Mail Stationery Templates are in Latin?  How do I get them to English?

    I've searched and searched and finally reached the end of the internet with no answer! All my mail stationery templates default to Latin. How do I get them to default to English. HELP!

    it's not Latin. It's Lorem Ipsum
    http://www.lipsum.com/
    It's a placeholder text without any meaning.

  • Making Personalized Stationery Templates

    I've not had any luck finding where the instructions are for creating personalized stationery templates for Mail. Probably a simple thing to do. Any pointers to where the instructions are?
    Chet

    http://www.jdempsey.com/how-to-create-customized-osx-mail-stationery-in-leopard/

  • Creating New Stationery Templates

    Running Lion, how do you create new stationery templates for Mail?  There are several articles in Google for Snow Leopard, et al, but nothing for Lion.  Same in this Forum - everything regarding stationery seems to be 2-3 years old???
    Also, where do the JPG's for the current stationery reside??
    Thanks.
    Mark

    As far as I know there is no way to place text on top of an attached image in Mail.
    When you click on an image attached to Mail, the image is selected; when you then type in new text, the text replaces the image, just as it would replace any selected text.
    You can add background color, set font face, style, and color for selected text, and do some other standard text formatting things.
    But, Mail is not a word processor nor a page layout program. There is no word wrap-around for embedded (attached) images, nor the ability to layer text on top of such an image.
    If you want to have text on top of an image, do that in another program (Preview or Pages, for example, depending on the complexity) and then attach the resulting composite to the email.
    How it was done for the predefined templates is something I have not been able to replicate.

  • Mail Stationery Templates

    The 30 or so professionally designed stationery templates that come as standard with the Mail application have disappeared from my computer. I know not how!!
    I am running OSX v 10.5.8 and Mail version 3.6 (936)
    Where can I find the templates on my computer or where can I download them?
    Please advise

    then reinstall Mail from the Leopard disk as Klaus says. this will not affect your Mail data in any way. it will just reinstall the Mail application. applications never contain any user data. that's stored in your home directory and will not be touched. after you reinstall Mail you'll also need to reinstall 10.5.8 combo update (download it by hand from the apple website) to bring Mail to its current version.
    Message was edited by: V.K.

  • Stationery templates

    I accidentally removed the stationery files from my MacBook. I cannot locate them on my 10.5.6 upgrade DVD. I need to know here I can get them and which directory to install them to. Mny thx for your help.
    Cheerz,
    Dave

    default stationery templates are in /Library/Application Support/Apple/Mail/Stationery.
    You can easily find them on the install DVD using Pacifist.
    http://www.charlessoft.com/
    BTW, How did you manage to "accidentally" delete them without knowing where they are located?

  • Dunning Letter template problem

    Hi,
    I've started using dunning letters but have a problem with a discrepency between the data that appears on my screen in the recommendation report (i.e the list of invoices being dunned) and the actual printed letter..
    For example on screen I can see the list of invoices for a particular customer like this:
    Doc No. / Date
    50847 / 14.01.2009
    50874 / 20.01.2009
    50902 / 22.01.2009
    51014 / 05.02.2009
    50944 / 30.01.2009
    51149 / 27.02.2009
    But the print out shows:
    50847 / 14.01.2009
    50874 / 20.01.2009
    50902 / 22.01.2009
    51014 / 30.01.2009
    50944 / 05.02.2009
    51149 / 27.02.2009
    Subtle difference but the dates of lines 4&5 have been swapped! All the other columns seems correct and I checked the actual invoices - the date showing on screen is correct - the printed version is wrong... I checked in PLD if the screen was showing posting date and the print out document date or something like that but it seems not. The template is 'Dunning Letter 01 (System) Doc ID DUN00001.
    Can anyone advise where the problem is?
    Thanks
    Karen

    Hi Gordon,
    I found a SAP note which seems to be the same issue but it seems to me to be old and supposedly fixed by now - I am on 2007A PL40
    Note 1117525
    Symptom:
    You print Dunning letters for a BP whose dunning terms are set as One letter per BP. In the printout of the Dunning letters, the rows are mismatched in such a way that the document dates do not correspond to the document numbers.
    This occurs when you have later documents with earlier document dates.
    Sorry for sounding clueless but not sure what you mean about replicating on test database in order to log support ticket?
    I do have a test database which I use to test things on but didn't notice the document no/date jumbling until I did it on the live one.
    How do I log a support ticket >- my other problems have been resolved with forum advice..
    Many thanks
    Karen

  • Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

    Hello,
    I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template. 
    So, I now want to try and update my service template.  However, whenever I try to do anything with it, in the services section, I receive the error:
    Unable to perform the job because one or more of the selected objects are locked by another job.  To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object.  ID 2606
    Well I tried that and there doesn’t seem to be a job locking the object.  Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all.  I tried running the following query in SQL:
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
    I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
    Can anyone help?

    No one else had this?

  • XML Publisher Template Problem

    Hi
    This is very basic question as I am new to XML/BI Publisher
    I am using templates in iRecruitment for Offers. I am facing problems when I am formatting numbers and uploading the templates.
    Problem is when I see the offer letter from Application, it generates pdf with following format
    120u000n00 whereas number should be 120,000.00
    My number format is as follows
    $#,##0.00;
    I am using Word 2007 and saving the file as rtf document. Uploading the document to R12.0.4

    What is your locale?
    <?show-page-total:TotalFieldName;'Oracle-number-format'?>
    "BI Publisher supports two methods for specifying the number format:
    • Microsoft Word's Native number format mask
    • Oracle's format-number function
    Note: You can also use the native XSL format-number function to
    format numbers. See: Native XSL Number Formatting, page 5-126."
    "To use the Oracle format mask or the Microsoft format mask, the numbers in your data source must be in a raw format, with no formatting applied (for example: 1000.00). If the number has been formatted for European countries (for example: 1.000,00) the format will not work."
    Is more than one format model being applied? That will cause problems too.

  • Invoice Template problem - Putting a Header field in repeating Lines rows

    Dear experts,
    I would be grateful for a problem I am having with an Invoice statement I am developing (Oracle Applications 11.5.10 with BI Publisher version 10.1.3.4). This is very similar to the one in Tim Dexter's Blog (Anatomy of a Template):
    http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
    My requirement is to add a single line into the lines table, as seen in the Blog, which is a COMMENTS field from the header part of the XML and the problem is that it can be 1 line to maybe 5 lines. This is only on the first page. This causes problems as I don't know how to find out how far down the lines table I may be after adding this COMMENTS header field in here, to then know how many lines to loop over to ensure that the lines do not carry on printing over the bottom of the page e.g. if the COMMENTS is 3 lines - how do I know this to then only print 3 minus the maximum lines per page ($lpp) only on the first page?
    Any pointers would be of great help.
    Many thanks,
    Mark

    The COMMENTS field I've found out can be of any varible size and include carriage returns. For example, could be:
    JD Trx special instructions 010908
    FAO: PETER MUSCUTT
    REF: FERRY ROAD 2351
    ========================
    INCOME DUE TO COMPANY FOR
    THE OPERATION OF EFERRY
    ROAD CAR PARK
    This causes such problems as being able to know how many lines this field will be, so that I know where to start the first Lines row in the invoice and also how many lines I can put on this first page (starting point - $lpp).
    One method I thought would be to count how many characters there are in this field, when it reaches the line size on the invoice, increment a count varible that would be used to indicate the starting point for the first lines record. I would need to compare each character and if it is a carriage return, then increment the count also. This seems quite a heavy wieght way to solve this and would welcome any over ideas.
    Thanks,
    Mark

  • Templates Problem in BI Publisher

    Hi All,
    I was new to BI Publisher, I had installed BI Publisher,BI Publisher Desktop successfully. Created an sql report in Publisher and created a template in MS word. The problem is,I had published the Template for a BI Publisher Report. when I try to view data for the report in BI Publisher using template I was getting following error "The report cannot be rendered because of an error, please contact the administrator".
    I had installed the tool just now and worked on that.any preferences I need to set? Please guide me. Any suggestions would be greatly appreciated.
    Regards,
    Anil.

    Hi Anil,
    The Same error had occured for me too. I have a temporary solution for this. Check the xdo file of the report, you can find the xdo file from C:\OraHome_1\xmlp\XMLP\Reports\<report folder> (location depends on the installation folder in your machine). in the second line of the xdo file the following link - xmlns="http://xmlns.oracle.com/oxp/xmlp" - should be present. The line should be like <report version="1.1" xmlns="http://xmlns.oracle.com/oxp/xmlp" defaultDataSourceRef="<source>">
    Put the missing link in the xdo and generate the report. This error occurs in some machines after saving the report configuration in BIP.
    -Stain
    Edited by: user11132834 on May 5, 2009 5:25 AM

Maybe you are looking for