Status for the transferred Suppliers is not updated in ROS client!

Hi all,
We are running on SRM 5.0(Sp6).After i transfer the propects from ROS to EBP and when i convert them to VENDOR in EBP,then the status of the suppliers become "RELEASED" in EBP but the status is not updated in ROS client.
What is to be done so that once the prospect is saved as a VENDOR in EBP,its status should be updated /set as RELEASED in ROS client too?
Any help is appreciated...Points will be rewarded.
BR,
Disha.

Deepti / Ramakrishna,
As per Rama's comments, the BP status is released only when we use SUS and the information is passed via XI. However in our case we have ROS (without SUS) and EBP in same client. In this scenario XI is not required to transfer the Business partner status as per OSS note 1134978.
So any idea how do we change the status from ACCEPTED to RELEASED?
Deepti - in one of the thread you did mention about a workaround to update the status? Did you manage to crack it?
Do you recommend having separate client for ROS, so that system automatically trigger XML message by standard?
Regards,
Sandeep Parab

Similar Messages

After upgarde Nexus 1000V the product Name still not update on vSphere Client

Hi All,
I encounter the problem after i upgrade the Nexus 1000v to new version 1.1a, but the vSphere Client console sill remain the old version Nexus 1000v 4a. Anyone know how to change it?
Attached screen capture for your reference.
Regards,
Jason

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that you are facing issue only with windows 8\8.1. So firstly suggest you to check with application support team, whether they have whole support for application with newer version. Also check once with application support team
regarding this issue.
This issue occurs because the local taskbar does not receive the EVENT_OBJECT_NAMECHANGE event from the system due to a timing issue. The EVENT_OBJECT_NAMECHANGE is needed to update the taskbar title information.
More information (For reference).
The taskbar may not show the application name correctly when using a Terminal Server RemoteApp
Hope it helps!
Thanks.
Dharmesh Solanki

HT1725 My credit card is attached to my permanent US address but I am connected to the French Apple store. My IPad shows the Us flag for the location but will not update my app bought in the US Store how do I change stores

My iTunes IPad app bought in the Us Apple Store online will not download the update for HayDay. It gives me a message that the app was not bought in the French store. How do I change to the US Apple store to resume updates to my application HayDay.?

Click here and follow the instructions to change the iTunes Store country.
(85459)

Supplier Directory not updated with Released status after the trasnfer

Hello Experts,
I need your help to resolve an issue.
We are implementing SRM 5.0 with ROS Client and EBP Client in place to manage Supplier Self REgistration and EBP.
When I trasnfer an accepted Supplier from ROS Client to EBP Client via OPI to create a Bidder in EBP and then extend the transferred supplier to Vendor status, I am able to see the ROS relationship established in the Vendor tab. But the Supplier still exist in Supplier directory. According to documentation, the status of supplier in ROS client will be automatically set to released and based in the status in EBP, the supplier status will be updated in the ROS - supplier directory.
Also I tried to convert the supplier to Vendor(instead of Bidder) and maintained all the appropriate fields. But still the problem exists.
Please let me know
1. Do I need to initiate any workflow for this?
2. Is the any notes to correct the issue?
3. Is there any config related to this?
Regards.
Vijay

Hi Vijay
ROS BP status is set to 'Released' only when you use SUS.
1) When you create vendor in EBP from ROS, check PORTAL Vendor
2) You should have mapped relevant XI mappings to transfer vendor from EBP to SUS.
When a Portal vendor is ticked and BP is saved in EBP, a XML message is generated and sent to SUS to create BP .
This XML message also updates the status in ROS to 'Released'.
Best regards
Ramki

Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!

Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!

Only thing I can think of is trying this Lion trick...
http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/

After downloading the new update ios 6 for the iPad , I can not find the YouTube app

After downloading the new update ios 6 for the iPad , I can not find the YouTube app. Is there a way to get the YouTube app back?

It's now not part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
 Cheers, Tom

Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.

Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

User status profile in Q-info record not updating on UD

Hi All,
My required scenario was, delivery of a material from a vendor must pass through inspection series
u2022     Model
u2022     Preliminary
u2022     Regular delivery
For that,
1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot.
Kindly let me know where I am wrong.
Regards,

Hi,
The problem is due to missing authorization object :B_USERSTAT".
Assign this authorization object in your id/role and give necessary values in the fields (activity, authorization key, object category and status profile) and then carry out the transaction again.
Thanks
SUMIT.

Status profile in Q-info record not updating on UD

HI All,
My required scenario was, delivery of a material from a vendor must pass through inspection series
u2022     Model
u2022     Preliminary
u2022     Regular delivery
For that,
1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot.
Kindly let me know where I am wrong.
Regards,

any clue??
Regards,

Failed to verify gateway status. The remote name could not be resolved: 'machinename' Office 365, Power BI

Hi
I am trying to setup a Power BI On Premise datasource at a client site.
I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears.
Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’
The servername which is returned in the error message is exactly the name which the DMG was installed on.
There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
Any assistance would be appreciated.

HI
Thank You for the reply.
I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
When setting up the datasource you should be on the same domain as the datasource as per the below post.
http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
Regards, Drickus

Unable to open delivery reports in Exchange 2013 SP1. Gives warning "The status for the recipient can't be determined because of a temporary error. Please try again later."

This seems to be occurring with all users (have tested a few, all display the same exact error message).
When I click on "Message Delivery Report" in Outlook 2010 or 2013, it points me to the ECP and displays this message "Warning The status for the recipient can't be determined because of a temporary error. Please try again later." I'm
not sure which log files to look at. The last time I remember it worked was before I applied SP1, I think CU3.
Our environment is two servers running Exchange Server 2013 Std. SP1 (847.32) in a DAG.
Thanks.

Hi,
From the error description, I would like to clarify the following thing:
Delivery Reports is a message tracking tool that you can use to search for delivery status on email messages sent to or from users in your organization's address book, with a certain subject. In Exchange 2013, you can track messages for up to 14 days after
they were sent or received. Please make sure the message you are tracking isn't older than 14 days.
Here is an article for your reference:
Track messages with delivery reports
http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

What do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated-- and now they are gone!!!!!! WHat do i do!!!!!!

what do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated…… and now they are gone!!!!!! WHat do i do!!!!!! Is this some type a virus???? my mac is protected!!!!! tried to chat with an IT person but they keep asking if its like a tech problem and it is just iphoto

You should get your keyboard checked as it's repeating on a lot of keys and makes you look silly.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

My feeds are updating but the iTunes store has not updated

I put my rss feed up on feedburner and all my feeds have updated but the iTunes store has not updated. I was wondering if there a simple explanation for it. Subscribers to the podcast have gotten the most recent update but the store hasn't reflected the new changes.

When you add a new episode to your feed and upload it, it appears immediately for subscribers because their iTunes application reads the feed directly and the Store is not involved.
However because of the huge number of podcasts in the Store (thousands) the Store caches the feed and checks it for updates periodically. For this reason it usually takes 1-2 days for new episodes to appear in the Store: sometimes it can be less, and occasionally the whole process seems to get stuck and it can take several days.
All this assumes that you haven't made an error of some sort in adding your episode: it's not possible to comment on that unless you would like to publish the URLs of both your feed and the Store page - this latter can be found by control-clicking on the podcast image (or where it should be) - and choosing 'Copy link'. Please include the http:// in both cases to make the links clickable.

Upgrade status for the current version: Outdated for

Hello,
we are running solution manager 7 EHP1 sps22.
this system has been recently upgraded to this version.
now before running solman_setup i tried to log into the /smd - solution
manager diagnostics i got the following messages -
"Upgrade status for the current version is outdated. Please upgrade now""Maintenance mode is enabled. Some applications will be disabled or might
not work"
i couldn't change the maintenence mode to disabled mode - since there isno agaent administration in the regular path - Diagnostics
Administration-Managed SystemsAgent Administration.
as a result i can't goto Diagnostics Setup-----Diagnostics
System--Advance setup and start the upgrader - i'm getting the followingerror message - Upgrade status for the current version: Outdated for
this version .
LM-Service is in patch 06 - latest release asa far as i know.

you are running into the same error like in your other thread.
please avoid double postings
see SAP Note #1273028
Known problems in all Releases 80
The bytecode instrumentation agent 8.0 cannot be used for Solution Manager self-monitoring. Please use Java agent version 7.2 for self monitoring of the Solution Manager Java stack. Otherwise Setup for Introscope Agents fails with
java.lang.NoSuchMethodError: com.wily.isengard.api.TransportConfiguration.<init>(IZZ)V ...

HT1725 My Visa account keeps getting declined at Apple.I used this very same Visa card on Amazon with no problem. I checked my status for the card and it is still all good. Please let me know as soon as possible

My Visa account keeps getting declined at Apple. I used this very same Visa card on Amazon with no problem. I checked my status for the card and it is still all good. My friends and I buy a lots of Apple applications on iTune.
We have the correct CVV2, Expiration Date and Billing address, but you keeps declining us. Please fix this problem for me. The issuing bank for this card is Eximbank, one of the largest banks in Vietnam. According to the bank, the transaction is processed in the US. This is a legitimate Visa card.
Please let me know as soon as possible. Apple does a disservice to its brand name by declining legitimate Visa account holders from using the cards in Vietnam.
Sincerely,
<Personal Information Edited by Host>

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your credit card number from your post as these are public forums (you should consider getting a new card from your provider as you've posted it here).
Your card is registered to exactly the same address (spacing and format) as is on your iTunes account ?You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Status for the transferred Suppliers is not updated in ROS client!

Similar Messages

Maybe you are looking for