Status sequence: exclude status from the middle of the min/max range

Dear Experts!
I have customized status schema and determined the status sequence. Etherything works well, but I need to exclude status from the range of statuses that user can set from the current status. For example, I have statuses:
10 status1 min-20 max-40
20 status2 min-10 max-30
30 status3 min-20 max-40
40 status4 min-40 max-40
And I need to let user set from "status1" only statuses "status2" and "status4", but not "status3". How can I do it without changing positions of statuses? Hope for your help.
Regards,
Vladimir

Thank you for your reply, Robert!
But how exactly can I do this? Should I use an exception NOT_ALLOWED of the method BEFORE_CHANGE? When I was trying to debug this method, I could operate only with one status (from importing parameters) defined by the filter of BADi CRM_ORDER_STATUS. Hope for your reply.
Regards,
Vladimir

Similar Messages

LabVIEW DSC: How to get alarm status from the area?

Colleagues,
I have, lets say, 50 Shared Variables where alarming enabled. Some of these variables assigned to area, so I can get status of the entire area or acknowledge an entire area of alarms (prior to version 8.x there was groups of the tags).
Now I would like to get alarm status from the entire area. How can I do it?
In version 6 I was able to wire tag group to Get Alarm Summary Status. Now, in version 8, Alarm Status.vi can be wired to the array of the variables, but not to area. Is it possible to get all variables from the area?
regards,
Andrey.

I am not sure if I should be posting my problem under this particular topic. I am having trouble understanding acknowledge alarm vi and what this vi is supposed to do is not clear to me yet.
I have around 300 shared variables in my project and I have created a particular vi just to view the alarms that may pop up during runs. I created a main menu and this alarm vi can be accessed upon a button click in the main menu. Users get alarm alert based on sound configuration. Then he can navigate to the alarm vi and acknowledge the alarm. The alarm vi only contains alarm and event display found under DSC module.
The problem is everytime I click the alarm button in the main menu, it takes around 2 minutes for the alarm vi to update which is very annoying and unsatisfactory in the middle of run. I am not sure why it happens and I haven't got any response from support yet. These shared variables are managed under 10 different library files that are set up based on different loops of the process (flow, pressure and so on).
Then I looked into three alarm examples that ship with DSC module. None of these examples use acknowledge alarm vi. I implemented another vi similar to alarm demo vi in that example - containing multicolumn listbox. I created acknowledge event containing acknowledge button and used the acknowledge alarm vi under this event. Read vi alarm is under timeout event.
When I click the acknowledge button as soon as I see the alarm in multicolumn listbox, nothing happens - the color of font does not get changed to purple neither any alarms get acknowledged. I tried to aknowledge alarm by variable name or alarms or alarm area, it does not give me anything. What is this acknowledge alarm supposed to do? I tried to find examples everywhere in the web that uses this particular vi and haven't found one yet.

How to add a privacy page and exclude it from the main menu, but include in links at the base

adding a privacy statement page and excluding it from the main menu, but including in links at the base of site

Right click on the page in Plan view and choose to exclude from menus. This will take it off your main nav.
For your bottom nav, change the menu to manual and add the privacy page manually.

[svn:fx-trunk] 13078: minor fix to exclude datavisualization from the package

Revision: 13078
Revision: 13078
Author:   [email protected]
Date:     2009-12-17 14:19:06 -0800 (Thu, 17 Dec 2009)
Log Message:
minor fix to exclude datavisualization from the package
QE notes: dmv folks to verify it matches with what they want
Doc notes:
Bugs: no
Reviewer: no
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml

HELP: Excluding footnotes from the word count

Hello!,
I'm a post-grad student, currently writing my dissertation, and I am hoping one of you might be able to help:
Q: Is there any way to exclude footnotes from the total word count?
I've tried it via Inspector > Document > Info, but all I get to see is the total word count including all footnotes and there's no checkbox to switch it of (like in MS-Word)
Footnotes are not included in the total word limit for my dissertation (20.000 words), and if I cant work out how to have Pages counting both footnotes and document text individually, I need to revert back to MS-Word and can't use Pages08 at all (major pain, not only as I then just wasted $79)
Any help & support would be greatly appreciated!
Thanks!

Unfortunately, no version of Pages has this fine-grained control over document components and their word count, so the answer is no, regarding user changeable settings.
Programmatically, I just told AppleScript to count the words of body text in a currently opened Pages v5.2 document. The count matched the Pages word count for the document. So, no solution there either.

Does anyone know how to exclude footnotes from the word count in the Pages for iPad app?

If I create a doc on pages for ipad, then view it on the iMac, the word count is lower. I figured out that this is because Pages counts all the words in the footnotes. Does anyone know how to make it exclude footnotes from the word count?

I see the exact same behavior on my IPAD(s) and IPHONE(s). This isn't the loss of titles already identified in other posts. Every movie that wasn't purchased from iTunes, meaning all my movies of my kids, shows it sync in iTunes, but doesn't show up anywhere on the devices.
Help Apple! Please un-break the feature that was functional before.

How do you hide Excluded Roles from the End User (8.1) ?

We have 2 Buisness Roles: Employee and Contractor. They are excluded from each other, meaning if you have one of the roles, you cannot be assigned the other role.
When a user logs into 8.1 to the OOTB "Update My Roles" WF, they see their Available Roles for selection.
These available roles listing includes the excluded roles.
So when a user with the Contractor role logs in, they see the Employee role as an available role.
If the Contractor user tries to add the Employee role, they will get an error due to the role exclusion.
I know it is possible to hide the excluded roles from the end user, but don't know how.
Does anyone know how to hide the excluded roles from users?
Thanks.

Hi
I may have misread your first comment but I totally agree with your response.
If the user has capabilities over multiple organizations it will show all roles, whether exclusion or not. (Been confirmed that this is how it is designed to work)
What could be done is when selecting a user is a specific organization, you could have a rule that only shows up the Business roles that are associated with that organization. So although you have the capabilities over all organizations you only see the roles that are available to the organization where the user is your are updating.
An idea anyway
Ian

Excluding videos from the upload?

Is there anyway to exclude videos from the upload to the iCloud library? I
n other words, i would like to keep my photos and videos in the Photos app, but only upload the photos..

Any items that have been imported to Photos, but are stored in there original location and not inside the Photos Library, will not upload to iCloud. The only way to prevent selected items from syncing to iCloud is to import them to Photos with the Photos Preferences > General "Importing: Copy items into the Photos Library" disabled. But that setup is not easy to manage consistently, if you continually have to switch between importing managed and referenced. It would be much simpler to move the videos to a second Photos library, that will not sync with iCloud.
By default, imported photos are copied into the Photos library. If you prefer, you can store photos and video outside the Photos library—for example, in a folder on your Mac or on an external hard drive—and still view them in Photos. If you ever need to move content stored outside the library into your Photos library, you can do that, too. For more information about changing where your files are stored, see Change where Photos stores your files.

I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc. Can anyone help?

I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc. Can anyone help?

Thanks so much! My grandaughters played games on the iPad over Xmas and one of their moms said shed restricted their access! Guess they forgot to enable again. Thank you again! Karla

Redirecting audio from the mini box to the TB display

I just installed the TB display update (12 Dec 2011). On completion I'm prompted to select a connectivity. Not understanding the ramifications, I select connection to the mini. I now get the audio from the mini and not the TB display. A big comedown.
The question is how to redirect the audio to the TB displays speakers rather than the mini and its tiny speakers.
cmd
Austin

To set up sound input:
1 Choose Apple () > System Preferences, and then click Sound.
2 Click the Input tab in Sound preferences.
3 Choose Display Audio to input sound through your display’s microphone.
To set up sound output:
1 Choose Apple () > System Preferences, and then click Sound.
2 Click the Output tab in Sound preferences.
3 Choose Display Audio to hear sound through your display’s speaker system.
These sound settings are used whenever your display is connected to your computer. They remain in effect until you change them.
Apple Thunderbolt Display - Getting Started
Stefan

From the mini to the nano

I have a question. When I upgrade from the mini to the nano, I have to install the new itunes, right? But do I want to completely uninstall the earlier itunes? I fear that I'll lose all of my music in the process.

You don't need to install iTunes if you already have it, just connect the Nano.

How To keep CNiKnob from going directly from the Min axis value to the Max axis value?

When a user drags the pointer on a CNiKnob with the mouse, he/she is able to drag the pointer directly from the minimum axis value to the maximum axis value.
This is obviously unacceptable. So is there a way to disable this behavior or a work around?

Unfortunately, there is not an easy way to do this with CNiKnob. One way you could work around it would be to handle the CNiKnob's OnPointValueChanged event and keep track of the previous value, then detect if the value jumps from the min to the max or vice versa and if it does, set it back.
If you migrate to .NET in the future, the Measurement Studio Windows Forms .NET Knob control lets you easily configure this and is the default behavior when you add a Knob to your form. For more info, see the documentation for the Knob.InteractionMode property.
- Elton

No audio from the mini port to hdmi

I was under the idea that if I wanted to convert my
Mini port to hdmi I would get audio as well. Am I missing something?

If your MBP was made before April 2010, there is no audio output from the Mini-Displayport, and you'll need to run a separate audio cable from your headphone port to the TV.

How to Get the min,max and original values in a single query

Hi,
I have a task where in i have to the min , max and the original values of a data set .
I have the data like below and i want the target as well as mentioned below
SOURCE
DATASOURCE
INTEGRATIONID
SLOT_DATE
SLOT1
SLOT2
SLOT3
SLOT4
SLOT5
SLOT6
SLOT7
SLOT8
SLOT9
SLOT10
1
101
201111
100
100
200
100
100
100
300
300
300
300
1
101
2011112
200
200
200
200
100
100
100
100
200
300
TARGET
DATASOURCE
INTEGRATIONID
SLOT_DATE
SLOT_VALUE
SLOT MIN
SLOT_MAX
SLOT NUMBER
1
101
201111
100
1
2
SLOT1
1
101
201111
100
1
2
SLOT2
1
101
201111
200
3
3
SLOT3
1
101
201111
100
4
6
SLOT4
1
101
201111
100
4
6
SLOT5
1
101
201111
100
4
6
SLOT6
1
101
201111
300
7
10
SLOT7
1
101
201111
300
7
10
SLOT8
1
101
201111
300
7
10
SLOT9
1
101
201111
300
7
10
SLOT10
1
101
2011112
200
1
4
SLOT1
1
101
2011112
200
1
4
SLOT2
1
101
2011112
200
1
4
SLOT3
1
101
2011112
200
1
4
SLOT4
1
101
2011112
100
5
8
SLOT5
1
101
2011112
100
5
8
SLOT6
1
101
2011112
100
5
8
SLOT7
1
101
2011112
100
5
8
SLOT8
1
101
2011112
200
9
9
SLOT9
1
101
2011112
300
10
10
SLOT10
e
so basically i would first denormalize the data using the pivot column and then use min and max to get the slot_start and slot_end.
But then i
can get the min and max ... but not the orignal values as well.
Any thoughts would be appreciated.
Thanks

If you want to end up with one row per slot per datasource etc, and you want the min and max slots that have the same value as the current slot, then you probably need to be using analytic functions, like:
with t as
(SELECT 1 datasource,101    INTEGRATIONID, 201111     slotdate, 100    SLOT1, 100        SLOT2,    200    slot3, 100    slot4, 100    slot5, 100    slot6, 300    slot7, 300    slot8, 300    slot9, 300 slot10 FROM DUAL union all
SELECT 1,    101,    2011112,    200,    200,    200,    200,    100,    100,    100,    100,    200,    300 FROM DUAL),
UNPIVOTED AS
(SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,1 SLOT,SLOT1 SLOT_VALUE
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,2 SLOT,SLOT2
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,3 SLOT,SLOT3
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,4 SLOT,SLOT4
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,5 SLOT,SLOT5
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,6 SLOT,SLOT6
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,7 SLOT,SLOT7
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,8 SLOT,SLOT8
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,9 SLOT,SLOT9
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,10 SLOT,SLOT10
FROM T)
select DATASOURCE,INTEGRATIONID,SLOTDATE,slot,slot_value,min(slot) OVER (partition by datasource,integrationid,slotdate,rn) minslot,
    max(slot) OVER (partition by datasource,integrationid,slotdate,rn) maxslot
FROM
select DATASOURCE,INTEGRATIONID,SLOTDATE,max(rn) over (partition by datasource,integrationid,slotdate order by slot) rn,slot,slot_value
FROM
    (SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,slot,slot_value,
          case when row_number() over (partition by datasource,integrationid,slotdate order by slot) = 1 or
          lag(slot_value) over (partition by datasource,integrationid,slotdate order by slot) <> slot_value
              then row_number() over (partition by datasource,integrationid,slotdate order by slot)
              ELSE null
              END rn
    from unpivoted
order by DATASOURCE,INTEGRATIONID,SLOTDATE,slot

[svn:fx-trunk] 12552: DataGroup now tracks the indices of the active virtual item renderers with a list , rather than the min/max values.

Revision: 12552
Revision: 12552
Author:   [email protected]
Date:     2009-12-04 13:45:12 -0800 (Fri, 04 Dec 2009)
Log Message:
DataGroup now tracks the indices of the active virtual item renderers with a list, rather than the min/max values.
DataGroup/addItemRendererToDisplayList() now respects the overlay.
QE notes:
Doc notes:
Bugs: sdk-24052
Reviewer:
Tests run: DataGroup, List
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24052
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Hello Martin:
Thanks for your input. However I am not certain we have resolved this issue adequately, or understand the principles governing the css as regards this spry menu framework 2.0 (1.0).
For example, the menu only works in IE 6.0 if the css remains in the head. I agree with your original post that it shouldn't make any difference whether the css is posted in the head or in a separate style sheet (so long as specificity issues are addressed). Both should work -- and yet it doesn't.
If the CSS is placed in the separate style sheet governing the total site, it doesn't work for 6.0. If placed at the top of the style sheet, conflicts of specificity prevent the menu from rendering properly in any of the browsers causing the rules for general links to govern the menu.   This has been verified using a cross browser testing. If the styles are placed at the bottom of the style sheet to help them take precedence, they work in all the browsers except for IE 6.
The website I am building needs to support IE 6 for a variety of reasons, and because it is catering to the non-profit community and to low income persons, I am mindful of even small differences in page weight.
So for me, at least, the issue remains baffling.
I appreciate your input, but also would appreciate the input from others, and especially Adobe Community Professionals and employees. The spry framework in this regard is not well documented. I am not certain if this is exclusively a CSS problem, if it might also be complicated by the architecture of the spry framework, or if indeed other variables are at play.
I would be my hope that in resolving the problem, other users of the this particular spry framework might also benefit.
Thanks,
Steve.

Status sequence: exclude status from the middle of the min/max range

Similar Messages

Maybe you are looking for