Status tool in the basis layer

Hello,
We are in the process of developing a small tool in the Basis layer of ABAP. But in our tool we would need to do status management.
Eg: the object would go from Ready->In process-> Active->Transport etc... baseed on different scenarios and situations.
In order to maintain these statuses in a proper way, is there any generic tool for status maintenance in the Basis layer which we could use?
Eg:There is a generic status tool like this (transaction bs12,bs22etc...) but which is situated at the ABA layer and so cannot be used by us.
Thanks in advance for your help.
Best Regards,
Sandhya

Hi Tom,
you can create a logical fact and logical dimension and join them to each other. The physical source in each case would be the standalone table.
Are there any aggregatable columns on the standalone table? If so, you could also create a measure on the logical fact. This will help the RPD to know which is the dimension and which is the fact.
Hope this helps.
Justin

Similar Messages

Quick selection tool doesn't snap to to the nearest area. Working more like a lasso tool and the add layer button doesn't seem to creat the cutout that it should.

Quick selection tool in elements 13 doesn't snap to the nearest border area of the photo. Works more like a lasso. Also the add layer button when clicked on only brings up a black layer, not a black mask with a hole where I just cut.

Which OS are you working on?
Please try resetting your tools from Photo Bin flyout menu.
1. Open Photo bin.
2. Click on Fly Out menu
3. Click on option Reset all Tools
4. Relaunch Editor13
and see if it helps.
Thanks,
Anwesha

Is it possible to import a pdf instead of a jpg to put in the base "photo layer?"

Is it possible to import a pdf instead of a jpg to put in the base "photo layer?"
I start with a pdf document convert it to a jpg
     mark it up in ideas
     then finish up with a marked up jpg document
     then reconvert it back to a pdf
I can only use jpgs in ideas. Converting the pdf to a jpg and them re convert it back after marking it up but this seems like an awfully round about way of doing things especially as it should all be inhouse adobe products .
An alternative would be to use adobe reader to mark up the document, but this does not allow me enough control as compared with marking it up Ideas, particularly with layers and control of the tools.
What I am trying to do is mark up and scribble over my architectual CAD drawings which are exported as a pdf document.
Any one got any bright ideas?
thanks
Brian C.

Hi Brian,
Saving as PDF it is not currently possible.I created the following feature request on your behalf. Please add your vote and any comments you would like see included
http://forums.adobe.com/ideas/1973
I also considered recommending Adobe Debut, it is currently only available on Android and might only work if you presenting the markup data from the tablet itself. You can import a multi-page PDF and add markups to the various pages and present the document to someone from the tablet, not sure if that would be useful for you or not?
Another consideration:
http://usa.autodesk.com/design-review/
-Dave

Date on the basis of status

hello experts,
I have an issue related to the Report designing.
I have some fields to display into the report like Completion date, Status Value.
Now I want to display only those date where status is completed, how can i achieve this as i have some more fields so i cant restrict the Status field globally in the report.
i also tried to create the Formula var for both compl dt & status & used the If condition but the formula gives some junk val.
please advice the soln
thanks in advance
neha

thanks for the response..
i had created the condition on the basis of status = completed, but it hides all other records having other status.
actually , the completion date is basically the creation date
suppose...
on 20.04.2011 the status was open then creation date was 20.04.2011 and then on 25.04.2011 status is changed to completed.
but on the same date there is a record having status released.
I want the data like this
Object id     Status           date                  value
aa11            compl           25.04.2011           27
a15d             released                                  36

Block Order TECO on the basis of operation User Status

Hi Experts,
I am trying to restrict the TECO of maintenance order on the basis of order operation status. I have configured the user status profile and assigned it to order operation. This user status profile have two statuses, INCL - Incomplete and another is CMPL - Complete. I have prohibited the TECO for user status INCL. But when I create an order and try to TECO, the system allows me TECO it enenif the operation user status is INCL.
Could you Pl. tell me, have I missed something in configuration?

Dattatraya,
Actually you can control TECO by completion confirmation of order operation as PCNF ( partial confirmation) for operation which you have mentioned in Order. So you can set up in configuration like allow TECO only once CNF ( Full confirmation ) for all operations mentioned in Order.
For your mentioned scenario , I dont feel based on user status you can stop the TECO, anyway you can check with other experts as well.
Riyaj

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

Three status lights keep flashing on the base station

I was using my Airport extreme, it was a-ok, then the power went. When the base station came back up all three status lights starting flashing rapidly and simultaneously and since then i cannot get any signal from the base station. I've tried to unplug for 5, 10, 60 mins then re-plug....it still goes back to the same situation. I had this problem before when i just got this replacement base station and usually after unplugging the power chord and waiting for say 1 minute, then plugging it back in, the flashing stopped and the base station started sending a signal again. Except this time all three signal lights continued to blink after re-plugging. Can anybody help at all..I could use some suggestions..I have already tried using the re-set button, it doesn't work. Airport admin utility cannot pick up the base station because there is no signal coming from it..I've checked the manual and it says that the base station has failed its power on self test...what can i do now...I had asked this question b4 when it was initially giving trouble (and i didn't have a manual handy) and was told that it should b ok..that was when i had the chance to return it to an apple-authorized service provider....now i don't so i would like to know what to do....this is a replacement base station!

Kurt,
You posted in the AirPort Express forum. You would probably get better help/suggestions from the AirPort Extreme forum.

No row count in the Physical layer of the Administration Tool

Hi,
While creating physical layer, I imported tables and set connection pool.
After this, to verify connectivity, clicked Tools > Update All Row Counts.
Now according to Oracle online guide,
"when update all row counts completes, verify that the row counts are displayed in the Physical layer of the Administration Tool"
I do not see the row counts in the Physical layer of the Administration Tool. No error message gets displayed either.
Am I doing something wrong?
I am new to OBIEE.
Thanks in Advance & Regards,
Deeba

Hi Hammett81 ,
I think, I have given configured connection pool correct. (following Oracle guidelines: 'In the Connection Pool dialog box, on the General tab, verify that the call interface is set to Default (OCI 10g) and change the data source name to the appropriate tnsnames.ora entry ( ORCL in this example). Please note that this is the TNS service name, not the ODBC DSN. ' )
I tried to give ODBC DSN (SH) as call interface, which resulted in an Error dialogue, implying, previous configuration was correct.
So, I reverted back.
Regards,
Deeba

About essbase import to admin tool ,at logic layer have not the total layer

i have import admin tool with a essbase . in the physical layer eg, a demention 'seg' it have the total layer then detail layer.
but when i drag them to logic layer , demention 'seg' it have not the total layer just only detail layer. i must manual add the total layer
why ,how can i self-motion have total layer

i do it myself

Does anyone know why the delete and hide options are still missing in the crop tool option bar, despite having changed the background layer to a regular layer? Thanks!

Does anyone know why the delete and hide options are still missing in the crop tool option bar, despite having changed the background layer to a regular layer? Thanks!

"flying blind."
"You totally lost me there, and I have no clue as to what your last question means."
"I think I now know what you mean."
Evidently language is of difficulty for you.
Perhaps the Oxford dictionary can provide you with your much needed “sensible, meaningful” content.
According to the Oxford dictionary, a dialogue is to "Take part in a conversation or discussion to resolve a problem." It also states that a dialogue is "A discussion between two or more people or groups, especially one directed toward exploration of a particular subject or resolution of a problem.”
That IS the inherent nature of posts. A conversation is reciprocation. Questions, followed by more questions.
It is not difficult to understand.
"how to ask your questions correctly for quicker and better answers" is best actualized by simply asking.
Is it a Mac; is it not, etc.
That IS sufficient. That IS "quicker and better answers[ing]." That IS what a dialogue IS. And that IS actually what is "sensible," "meaningful," and "detailed."
The Oxford dictionary can best delineate and elucidate your lack of comprehension in what ACTUALLY “meaning” is.
As well as what is "sensible" AND "detailed."
By the way, am I being repetitive.
Still confused. Let the experts that do not require much explanation respond with "quicker and better answers" for both "sensible, complete" responses." They are not "lost," "blind," or provide "incomplete" drivel.

How to import tables to the physical layer of the Administration Tool.

Friends could help me with this issue. I'm just starting in OBIEE
How to connect a ORACLE database 11g R2 installed on Linux with OBIEE administration tool that I have installed Windows Server 2003 to create a subject area.
Basically I want to import the tables from the database on Linux to the physical layer of the administration tool that is installed on Windows Server 2003.
I can tell how to make this connection step by step.
Beforehand thanks for the support.

hi,
How to connect a ORACLE database 11g R2 installed on Linux with OBIEE administration tool that I have installed Windows Server 2003 to create a subject area.create DSN by taking correct ODBC driver for 11g R2 in windows 2003 with linux DB credentials
thanks,
Saichand.V

Working in Expert mode, with Layers, somehow locked up the first layer by using the eyedropper, and can't undo it. Now, when I go to Expert mode, this one layer shows up, with the tool still showing, and I can't even begin to edit a new photo, or get the

Working with Elements 12, in Expert mode, with the first layer, I did something to lock up the whole Expert mode. I can't get rid of the eyedropper tool, or cancel the layer I started. Now, when I put in a new image to edit, I can't even get the normal Expert editing dialogue that normally appears on the right side of the screen. Can you help me?

Oh and to add, when I downloaded the skype app onto my dad's air...I got a notification to my personal yahoo mail, it says:
Dear My Dad's Name ----------- weird because it's my email address
Your Apple ID, *my dad's apple id* was just used to download Skype for iPad from the App Store on a computer or device that had previously been associated with that Apple ID.
I'm guessing his apple ID is linked to my email address...however, when we checked his personal gmail account, he got the same email..

PSE 6 for Mac, how to install the new layer mask tool

I just bought the new PSE 6 for Mac, whew what a change in the color of workspace.
My classmates and I are wondering how to install the free layer mask tool that Sue Chastain has on her About site.
Or perhaps first, has anyone used it and do you like it?
Do you put it here?
http://www.jcarter.net/mac-stuff/layermaskthing.jpg
Havent been to this great forum for a while, been busy, I miss you all, and shall try to visit more often.
I remember when I was a beginner at this, I learned so much here and you all were amazing help!
Thanks,
Jane

Hi Barbara,
Its this one,
http://graphicssoft.about.com/od/pselements/p/layermasks.htm
So I assumed afterwards that it wasn't for Mac. So I went ahead and installed the older action for my PSE 4.
I was hoping it was platform agnostic, but when I looked at this, the difference between the 2 versions,
http://www.jcarter.net/mac-stuff/previewfolder-missing.jpg
Not knowing where the Previews folder was, threw me overboard.
And I didn't read all the way down Sue's page, as my old brain got ahead of my eyes.
So I really dont know what to do next with this, some of my classmates are wondering the same thing.
Thank you,
Jane

I have several layers for this image: Background, Moon, Tree, Grass and Clouds. When I try to use the Move tool to move the Moon, the tool jumps to the Tree layer. The same thing happens with the other layers as well (except the background layer). How

I have several layers for my image: Background, Moon, Tree, Grass and Clouds. When I try to use the Move tool to move the Moon, the tool jumps to the Tree layer. The same thing happens with the other layers as well (except the background layer). How can I keep the move tool from jumpimg to the Tree layer?

1. Pre-select (highlight) the layer to move in the Layers panel. or-
2. [ALT+Right mouse click] to select the wanted layer in the image window.
and maybe
3. Set the PS option to "Auto-select" a layer with cursor hover. (can be very confusing!)

Why does the vector selection tool (white arrow) change layer selection to another vector mask?

I have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
Does anyone know any resolution for this?
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?

What version of Photoshop are you using????
The White Arrow tool is the direct selection tool and it work best way you point it at a path segment line and click once. When you do all the control points in a close path segment will be marked with little squares and the two control point adjacent to where you clicked will have handles you can adjust.
You can also drag out a rectangle with the direct selection tool. When you do you may select many closed paths in a path a path may have many sub paths and each has a mode like add, subtract, intersect etc, and each has a stacking order like in a layer stack. So if you drag out a rectangle many paths control points will be marked and control point adjacent to crossing rectangle will have handles. Can be very confusing.
Here are two screen capture the first on shows the layer palette and path palette. You can see many shapes and path with sub paths and modes. I also targeted layer a vector mask. The selected the direct selection tool and in the image window I pointed at the 45 degree oval path near the top right. You cab see the four control points and two with handles. The second screen capture I only captured the image window. I used the direct selection tool and draged out a rectangle and you cab see many segments control points and many have handles. I have no problem selecting what I want to select

Status tool in the basis layer

Similar Messages

Maybe you are looking for