Status updation in Notification

Hello Guru's,
In my process of Notification change mode transaction ,When I add task to the notification ,the task status is not appearing in the status column of the task tab .

Hi Chetan,
please save the notification and then check again
if it is really useful to you pls reward me with points
Regards
Satish

Similar Messages

Mass updates for Notification/Workorder status

Is there any way for Mass update of 'status' because orders and notifications need to be un-teco before updating planner groups and work centers? we are using Mass update for IW58,IW38 & IW29 and there is no option for STATUS update.

Thanks everyone for there response. I'll check the possiblity to add a button in IW28 for the closed notificaitons via any of the below BADIs:
BADI_EAM_RIQMEL20_FCODE_CUS1 : Implement Customer Function Code in Notification List
BADI_EAM_RIQMEL20_FCODE_SAP1 : Implement SAP Function Code in Notification List
and for Work Order:
BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
In IW28 & IW58 there is option u201CPut in Processu201D in Notification Menu, but when I used this option it says u201CNotification is completed -> can only be displayedu201D. I wonder why this option is not working if Notification is completed.

Why have the tweet and status update boxes disappeared from notification page a werk after updating to iOS 6v

When i updated to iOS 6 last week i had the tweet and facebook status update boxes on my notification page and have been using them daily but today they have both disappeared and i don't know how to get them back.

Your issue has already been addressed ad nauseum. Please search this forum and/or look in the "More Like This" box to your right.

BB Z10 BBM Group updates and notifications not showing up in Hub?

BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58.
Any workaround?

vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OnPlus not providing new Contract/Warranty status updates

The Cisco Contract/Warranty notification function in OnPlus is currently not providing new updates.
The Product Contract/Warranty function of OnPlus displays product up-to-date information regarding the Contract status and Warranty for supported Cisco devices. This function is currently not providing new updates to those devices in OnPlus and the OnPlus engineering team is working on a resolution to the problem.
Status updates for other product lifecycle information about Cisco devices, such as, Software and Hardware End-of-Life, Product Security Alerts, and Field Notices are available in OnPlus.
As additional information is known for the time to resolution, we will post more details.
Thanks,
The OnPlus team

We have resolved this issue and OnPlus is now providing complete lifecycle information for new devices scanned or discovered through ON100.
We applogize for any inconvenience.
Thank you,
OnPlus Team

Request Status Update

Is "Request Status Update" a feature that is available within Project Pro 2013? If so, where is it located?
\Spiro Theopoulos, Montreal, QC (Canada)

With Project On-line I guess given that there are no reminders/ notifications, there would not be any benefit in implementing it. Is this correct?
\Spiro Theopoulos, Montreal, QC (Canada)

Nokia Social Status Update

In the moment I'm using Nokia Social App v1.5...
When I put a status update via this.., it shows only to a one friend list...
How could I fix this...
Thanks...

N8power wrote:
Hi I was wondering if the social app version 1.5.215 will be updated further, Becuase it needs features like viewing Pages you liked, Groups That you've joined, Faster viewing and loading for albums and pics, when you press notifications it doesen't take you to the actual notification so whats the point ?????? and last but not least it needs FACEBOOK CHAT.
Thanks for your time,
P.S if these things are implemented I will consider upgrading my N8 to the new 808
but if not I thinks its the android road for me sadly since is the only timg that bugs me with my N8 since Belle.
I'm not sure why you're bothering with the Social app when you can use one of the alternatives such as Facinate (sic), the officail Facebook app or Fmobi. The first two are free but Fmobi is a paid app and all are available from Nokia store.
Ray.

Status update for MeeGo on the N900

Here's a copy of the text sent by Harri Hakulinen from Nokia. He is the project lead for MeeGo on the N900. This message was sent to the MeeGo developer mailing list just now:
Hello MeeGos !
This is brief status update of "MeeGo to N900" project. This project is currently running as Nokia project, and I am Nokia project lead for it. The current closed mode of development is not the target for us at all, but rather transitional condition. As already discussed by Valtteri in TSG meeting, we are looking into going more open mode shortly. One reason why we have done this on this way is that at the same time we have been trying to handle opening of many currenly closed components that are needed in MeeGo and to build feasible MeeGo images for N900.
However, a lot of related work is already done completely open, you can find more info from places like ofono.org, connman.net and meego.gitorious.org . So if you are eager to contribute or want to closely follow whats happening, please work on those.
As you know, we have delivered working MeeGo images for N900 as part of first code drop in the end of March. At that state we were using older kernel version on N900 than on Atom side, as we used the same kernel (.28) than what is used in Maemo 5 based products today. We ended up doing that simply because lack of time to contribute and port all the drivers to the newer kernels.
Now, for the upcoming May release of MeeGo, we are going to use the same kernel version (.33) than Atom based devices are using. For that we need to submit number of ARM-architecture patches to MeeGo as well, because many of the required ones have just been contibuted upstream kernel and were not available in .33 version originally.
We have already enabled most of the main drivers, like LCD, GFX, Wlan and BT. Still, there is a lot to do in order to enable .33 on N900, like audio drivers, and modem subsystem including SSI buss driver, modem data and audio drivers etc. Our adaptation guys are in fact contributing those modem subsystem related drivers as we speak, and if you are following kernel mailing lists you can see how that goes on.
Besides of enabling the new kernel, we are working with number of smaller and bigger issues for N900. Starting from the beginning, we are now based on ARMv7 combiled code, so the code should be better optimised for N900 now. ARMv5 compilation that was in use for code drop will still be there, and it also seems to be used at least by community project that is planning to release MeeGo for good old N810 tablets
Also, we are planning to enable dual booting of Maemo 5 and MeeGo for the upcoming release. So that will be offered as 3rd way to setup MeeGo to N900, including the existing "native" MeeGo only on N900 and chroot based MeeGo on Maemo 5 setups. Taking the dual boot mode into use likely includes upgrade to Maemo5 kernel as well, but that should not be big issue in the process of enabling that.
As I don't want to go ahead of others working on MeeGo architecture and other issues I will stop now, but I will report again when we have more to tell about the subject.
Br,
// Harri

Here's another update..
It seems that MeeGo on the N900 is not directly being driven by Nokia! It's an open project.. so the net result is MeeGo on the N900 may look and feel very different to Meego on the N900's sucessor
Either way, I'm certainly greatful for their efforts!
Hello Meego's,
As indicated in my previous mail about "MeeGo for N900" status, we were planning to open up our MeeGo work around N900. Now I am happy to announce, that we are there
First, to make it absolute clear for everybody: This is about open MeeGo adaptation to N900 device.
Like any other MeeGo project, it is open source project for all applicaple purposes, and does NOT directly have links to any potential Nokia product or potential product plans. So, based on this or any other of my posts, please do NOT start or continue speculation of upcoming Nokia MeeGo releases. That is practically not helpfull, and mostly only takes our time when we need to explain our words and actions in detail to various directions.
From our part, we are trying to implement the open development model that has been discussed now so many times around MeeGo. On practical terms, we are trying to work based on proposal by Carsten Munk, see
http://wiki.meego.com/Proposal_for_Best_Practices_for_working_in_a_MeeGo_team
We have already created some resources that will be used by the team, you can learn about those and the upcoming ones from http://wiki.meego.com/ARM/N900. We have IRC channel for realtime discussion, we will use meego-dev mailing list for normal discussions and announcements, and we will have Gitorius project for code.
We will evolve our practicies during the work, so if you are interested, stay tuned to those channels. I belive that soon we are also able to figure out, what is best way for community members to help us in development, and then effectively be part of the team.
I would also like to use this as opportunity to introduce the team behind this work (so far) and also thank them about their hard work and long hours. We have team that consist of some Nokia subcontractors and also growing team of Nokia personel:
"MeeGo for N900" team (so far)
- Cybercom Turku team; Marko Saukko, Jouni Peltonen, Sami Sirkiä, Jari Smura and Luka Milovanov.
- Cybercom Tampere team; Kalle Lampila,Teemu Tuominen,Tuukka Mäkinen and Ville Marjusaari.
- Carsten Munk via Nomovok
- Jarkko Nikula via Atomide
- Jan-Simon Möller from Linuxfoundation
- Nokia team; Alexander Kanevskiy, Felipe Contreras, Markus Lehtonen, Ameya Palande, Sakari Poussa, Roger Quadros and me.
In addition to official project team, many Nokia people have helped us despite their hectic daily work, even with their free time. Most of them are driven by the desire to open, repurpose and upstream all relevant sw that has been originally created for Maemo 5 based N900 product during previous years.
Marko, Jouni, Sami & Luka and Markus were working with me already on last year when we did prototypes and interoperability tests of Maemo & Moblin stuff combined in different ways. Based on those we had pretty good picture of what we are doing and why.
And of course, we have had very good and productive co-operation with various Intel teams since those times. Anas Nashif and many others from Intel's MeeGo team have done a lot for us by enabling ARM stuff in MeeGo OBS and repositories.
Last but not least, I want to give special thanks to Stskeeps (alias Carsten Munk . He has teached us how to operate on open, and he has also done respectable amount of this work since early days of Meego. In addition to that, I belive that his earlier work on Maemo community and on Mer project has in fact inspired all of us and shown a way to MeeGo alredy years ago.
Br,
//Harri

Unable to run bapis for project status update and date update together

Hi Experts,
I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS   i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
I have tried putting a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
Loop at itab.
if date_changed = 'X'.
      CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
      READ TABLE it_error WITH KEY message_type = c_e.
      IF sy-subrc <> 0.
Commit
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
   endif.
endif.
if Status_change = 'X'.
      CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
      CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
      READ TABLE t_result WITH KEY message_type = c_e.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_PS_PRECOMMIT'
             TABLES
                  et_return = t_ret.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
     ENDIF.
endif.
    WAIT UP TO 4 SECONDS.
endloop.

Try to use
SET UPDATE TASK LOCAL.
before each BAPI call.
Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

Delivery status update in sales document at PGI

Normally system updates the delivery status of sales document line level, when a delivery document is created with respect to that sales document line.
But I want system to update the delivery status (in sales doc. line) when PGI is done for respective delivery document; not at the creation of delivery document. Below I have shown the status updating scenarios that I expect.
Scenario 1
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: Not done
Status in Sales document line should be A (Open)
Scenario 2
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: 50 PCs
Status in Sales document line should be B (Partially delivered)
Scenario 3
Sales doc line qty: 100 PCs
Delivery Doc qty: 100 PCs
PGI: 100 PCs
Status in Sales document line should be C (Fully delivered)
Can anyone propose a possible way of doing this (configuration/ user exits/ BADI etc,)?
Thanks,
Ramindu

Hi,
I dont know it with the use of ABAP development, but by functional logic, can suggest you to configure the rush order sales configuration for your particular sales order.
just check that availability of that particualar sales order is met or not prior to it.
and then automatically when your delivery doc is created, PGI would be done and the status of your sales order would be updated with it.
try it out on your development client, if it works out.
regards,
Siddharth.

HT4314 hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

And the answer is:
williamfromlongueuil wrote:
we have the same itunes account in game center
You need to have your own account... DUH....

Status Update of Service Order From Billing Document

Dear Experts,
I am told to change the User status of Service Order once the Billing Document is Generated.
Here we are in CRM 2007 and i have done the status update of previous document but here
Billing document is not possible to read through CRM_ORDER_READ (function module).
Do any one have any idea how do i proceed.
Thanks,
SA

hi sa
to change the service order user status , when biling document is generated
make an implementation of bill_acc_if bai and in the method ENRICH_ACC_DOCUMENT
read order data using crm_order_read and change the status using
CRM_STATUS_CHANGE_EXTERN
thnks
sam

Can´t access my files on Creative Cloud. "Page temporarily unavailable. We will return soon." "We are working quickly to resolve the problem and apologize for the delay. Check back later or visit our website for status updates. In addition, you can get he

Hello,
For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
"Page temporarily unavailable. We will return soon."
"We are working quickly to resolve the problem and apologize for the delay.
Check back later or visit our website for status updates.
In addition, you can get help in the forums of the Creative Cloud.
Thank you for understanding!"
(I used Google Translate)
Somebody help?

You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
Post screenshots of your results or send me a private forum message with the information.

Report on "Status updates history"

Hi,
i need to check if resource are updating task from "My Task". Is it possible to estract a report on "Status updates history"?
I mean this type of data:
Approval Date
Action
Status
Info
Task Name
Project
Type
Start
Finish
Actual Work
Remaining Work
% Complete
Assigned To
Approved By
Thanks
Daniele

Hi Daniel,
You will probably have to create a join with the MSP_ASSIGNMENT_TRANSACTIONS Table.
See reference here:
http://blogs.msdn.com/b/project_programmability/archive/2008/01/03/statusing-transactions-partial-documentation.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

FM for changing system status in Service Notification

Hi all,
I have a tough situation here.
To change the system status in service notification, the system use "IQS4_CHANGE_STAT_NOTIFICATION".
CALL FUNCTION 'IQS4_CHANGE_STAT_NOTIFICATION'
EXPORTING
    i_qmnum                  =
    i_vrgng                  =
    I_CHECK_ONLY             = ' '
    I_SPRAS                  = SY-LANGU
    I_BEZDT                  = SY-DATUM
    I_BEZUR                  = SY-UZEIT
    I_POST                   = 'X'
    I_COMMIT                 = ' '
    I_WAIT                   = ' '
    I_REFRESH_COMPLETE       = 'X'
IMPORTING
    E_VIQMEL                 =
    E_STTXT                  =
    E_ASTXT                  =
TABLES
    RETURN                   =
2 main fields are required; i_qmnum and i_vrgng.
I am able to provide i_qmnum (as this is the service notification number that i need to change).
However, i_vrgng is a field in table (TC33-VRGNG). The values in the table does not make sense to me.
Example. To change the status to NOPR (Put in progress), the FM uses PPM2 or PPM6 for i_vrgng. If we take a look at the table TC33, it doesn't indicate in anyway how NOPR is related to PMM2 or PMM6.
Is there a guideline (ie, to change status to OSTS, i use a certain value in TC33-VRGNG to run the FM)?
Please see BAPI_SERVNOT_POSTPONE & BAPI_SERVNOT_PUTINPROGRESS for a clearer picture of what I'm saying.
Thanks,
Earl

Please try using FM STATUS_CHANGE_INTERN for changing System Status as i was not able to find any link between status and the field provided in FM in ur post.
This FM directly changes system status of any object.But this FM requires System Status Value not Text.
NOPR, NOCO etc are system texts.The main table for system status is TJ02T which will give u the status value for the status text.
For eg NOPR status text will have status value as 'I0070'.
Reward Points if useful
Edited by: Pratyasha Shishodia on Mar 14, 2008 11:07 AM

Status updation in Notification

Similar Messages

Maybe you are looking for