Std price of material updation in SAP system

dear all
I had created a material CLC Block in material master & had mention the Std price for the same. say 28 rs/unit
Then i had change the std price for that particular material by T-code MR21.
say 30 rs/unit.
the system shows the updated new price for that material in Master, but when we make GRN for the same material by movememt type 501 q, the system takes the old pirce only. ie 28 rs/unit.
the cost gets book w.r.t old price only.
pls help me out in this mater in detail.
thank in advance to all SAP experts
regard
parikshit

hi
udo
thanks for your valuable input.
I had test the procedure what you had explain.
i had assign the price w.r.t WBS no & it works
thanks once again
regards
parikshit

Similar Messages

Manual changes of Std price in Material master

Dear friends,
I am updating the price in material master monthly by std. cost estimate,
Can it be possible to change the price manually.
If it can changed manually ..........can anyone tell me how to do it...........
I tried it by MR21, but it is not allowed in my system..............
I am in urgent need............
Thanks & Regards
Shailesh

hi shailesh
To change the std price manually first u have to delete the std cost estimate for that month which has been marked & released . To do that use t- code CKR1 then change the std price using MR21.
This should work.
Regards
Prasad
Reward if useful

How to find the list of different material in other SAP system.

We have two SAP different systems. there is an integration between two systems.
One system has 2 millions materails (parts) and other system has 6 millions materails (parts).
I need to know the list of what are those 4 miilions of materials in the other sap system .
How can I find out the list of the 4 millions additional material list ?
Can you please help me .
YOUR HELP WILL BE HIGHLY APPRECIATED.
Thanks in advance.

Hi,
Compare two different environments/systems in t.code: SCU0 . Also you can try with OY19
Regards,
Biju K

ICIS - Price update in SAP

Hi,
We wish to re-initiate the Daily Update of International Prices for Key RAW MATERIAL in our SAP System.
With this system, while making the Purchase Order in our SAP system, we can able to understand that our purchase is above/below the international price level. Base on that the Control Key will allow releasing the said purchase order.
Kindly advice how to go ahead in implementing the above refers system.
Thanks in advance
Samir Bhatt

Dear Ajit,
1.Manual entry -
Manual entry will be applicable in only some cases and you cant able to track if some one has changed the price and it is having limitation .
2.through condition records-
where as if you maintain the price through the access sequence and user cant able to change the price manually and for different combination and different material you can maintain different prices .here there is no limitation and you can extend this price for different combination in future .
Based on the above points you take decision.
Regards,
C.B Reddy

Material std. price change

hii
Can we change the std. price of material...if yes..then pls tell me t.code..?
regards
Rekha sharma

hi rekha,
Are you talking about changing the "Price control" (Price control S to V) or just a standard price amount in a material?
If you want just the amount then use MR21. And then give the new value as the new price.
If you want to change the price control then it has few prerequisites prior change it.
You need to delete all open PO line items, Production Orders and stocks.
Then only you can change the control. And it will give all open orders when you try to change it.
If you delete all then you can use MASS to change it mass level.
Hope this will helpful.
thanks & BR
sandun

Updating SAP system

Hallo Everybody,
I've finally installed mySAP. Actually, I have a problem for updating the system.
I have two separated database D01 for Solution Manager 4.0 and D02 for ERP ECC6.0.
The problem is that after installing ERP ECC 6.0 I can't really access the Solution Manager Transactions( or SolMan System).
In the Beginning, I thought that Solution Manager 4.0 will still works after the installation of ERP. But now I thing something has gone wrong.
I need to update the Sap System and without the SolMan4.0 is actually impossible.
<b>Quesion:</b><b> Has Netweaver something to do with that? Do I really need it to let both systems works?</b>
P.s. Any helps will be appreciated.
Thanks for your responding.
Regards,
Kais

Hi Raguraman,
I don't know whether the Solman is up or not. I guess yes.
Because what I got on the SAP MMC are two instances, I think one for the java and the other for the ABAP.
And after installing the solman and using it for a while, I finally installed ECC(only the ABAP instance)
Using the saplogon I accessed the sap system. But I couldn't use the transaction of solman such as SPAM or SOLMAN ...
So I've a problem, because I can't update the system on the later time.
Regards,
Kais

Std price

Hi all
How to change the std price in material master.i had uploaded the materials by lsmw and it is not considering the decimal places while uploaded.
for eg: if the price is 21.97,it is getting updated as 2,197.00 in the materail master.
please guide me in this issue.
regards
shaker

Please check the definition of the currency you are using. Maybe it doesn't allow decimal places.
Re: DECIMAL NUMBERS NOT ALLOWED IN PRICE FOR STANDARD OR MVAP
trx: OY04
Edited by: Csaba Szommer on Mar 19, 2009 10:07 PM

IDOCS: Inbound non-SAP system

Hi
The outbound idocs works fine. I want to create an inbound goods receipt/movement idoc.
Should i rather write RFC to update the SAP system from a non-SAP system ?

Hi,
Your first query...
Should i rather write RFC to update the SAP system from a non-SAP system ?
Always prefer using idocs for posting before BAPI / RFC fucntion module.
As you have mentioned outbound idocs are working fine..which means you are able to create idocs from non-sap system..right? If so you can use same idoc type for posting.
Your second query's answer...
Check out following code for calling BAPI_GOODSMVT_CREATE
You need to code to call function module /BAPI in your posting program as follows..
append the data into the corresponding internal tables and work-area, check for the IMPORT and TABLES parameter in the function module BAPI_GOODSMVT_CREATE.
a.     GOODSMVT_HEADER-DOC_DATE = SYST-DATM
b.     GOODSMVT_HEADER -PSTNG_DATE = RECEIPT_DATE (Input File)
c.     GOODSMVT_HEADER - HEADER_TXT = BATCH ID (Input File)
d.     GOODSMVT_HEADER - GR_GI_SLIP_NO = GOODS_INWARD_NO (Input File)
e.     GOODSMVT_ITEM-MOVE_TYPE = Constant 101
f.     GOODSMVT_ITEM-PO_NUMBER = PURCHASE_ORDER_NO (Input File)
g.     GOODSMVT_ITEM -PO_ITEM = PURCHASE_ORDER_LINE_NO (Input File)
h.     GOODSMVT_ITEM PLANT = From Selection Screen (WERKS)
i.     GOODSMVT_ITEM STGE_LOC = From Selection Screen (LGORT)
j.     GOODSMVT_ITEM -ENTRY_QNT = QUANTITY_RETURNED (Input File)
k.     GOODSMVT_ITEM -NO_MORE_GR = COMPLETE_INDICATOR (Input File). Value X if status = X else space.
6.     Call the function module BAPI_GOODSMVT_CREATE.
7.     Use function module BAPI_TRANSACTION_COMMIT to do the commit work.
append the data into the corresponding internal tables and work-area, check for the IMPORT and TABLES parameter in the function module BAPI_GOODSMVT_CREATE.
a.     GOODSMVT_HEADER-DOC_DATE = SYST-DATM
b.     GOODSMVT_HEADER -PSTNG_DATE = RECEIPT_DATE (Input File)
c.     GOODSMVT_HEADER - HEADER_TXT = BATCH ID (Input File)
d.     GOODSMVT_HEADER - GR_GI_SLIP_NO = GOODS_INWARD_NO (Input File)
e.     GOODSMVT_ITEM-MOVE_TYPE = Constant 101
f.     GOODSMVT_ITEM-PO_NUMBER = PURCHASE_ORDER_NO (Input File)
g.     GOODSMVT_ITEM -PO_ITEM = PURCHASE_ORDER_LINE_NO (Input File)
h.     GOODSMVT_ITEM PLANT = From Selection Screen (WERKS)
i.     GOODSMVT_ITEM STGE_LOC = From Selection Screen (LGORT)
j.     GOODSMVT_ITEM -ENTRY_QNT = QUANTITY_RETURNED (Input File)
k.     GOODSMVT_ITEM -NO_MORE_GR = COMPLETE_INDICATOR (Input File). Value X if status = X else space.
6.     Call the function module BAPI_GOODSMVT_CREATE.
7.     Use function module BAPI_TRANSACTION_COMMIT to do the commit work.
Hope this will help you.
Cheers,
Nilesh

Interface and SAP system issue

hi Experts
Scenario : We have External system (Interface) and SAP system. GR usually done in External system for stock materials PO , then it will transfered and updated in SAP system thro IDOC daily bases.
And then in SAP ,Zreport is there to find out any discrepancy in stocks(Between Extrnl and SAP system).
Problem: They had done GR in external system and they had transferred to SAP throu IDOC. (This usually bieing processed for 1000 of materials.
Now for some materials its showing discrepancy error in Zreport eventhough the SAP system got updated on stocks throu IDOC from external system. ( Not for all materials only for very few case).
So any experts has come across this kind situation in thier experiance .. how to solve this ??
Note : If any Bacth job is being done in background in SAP after updation the stocks in SAP system throu IDOC. How to find out the batch job in back groud ???
Thanks

hii
Thanks for ur response.
I did't mention in previous message, IDOC got posted in SAP system perfectly without any error . (I have cross checked IDOC).
But after idoc posting in SAP system , the Zreport getting updated , so here is my confusion and doubt.
Where there can be any system in background to update stocks in Zreport from SAP system. Is it possible to find from our side batch job has being processed between standard SAP and Zreport .
There is any way to find ???
Thanks

On costing run, Raw material price in Std price field is getting updated

Hi All
When i am executing costing run (CK40N) for a FG, the price field in Std price for a raw material is getting updated.
We are maintining price control as "V" in case of raw material.
Is this right? if not, how can this be avoided.
Regards
Rakesh Hase

HI Ian,
Given enough time and money, anything is possible....
You do not say which industry you are operating in. In some SAP industry solutions the functionality you describe is available - if I remember correctly IS Mill Product has something like that. It is available for use by companies that for example make copper cable. They get a regular copper price from an exchange.
But it would be relatively simple to get a feed from an exchange with the daily closing price, and then write a little program that will read that file and post an MR21 transaction to update the price.

System is picking the previous price in material master

Dear all,
We are purchasing the halb material with price control S. Initial stock upload v hav uploaded with one price after that uploaded the stock. then created some po and grn also made those po's/. now we found that that std price was wrong, then manualy maintain the new price in MR21. Here quality also available so we are did return delivery and once again did the GRN. now also system is picking the previous price only. Pls help me to sortout this issue.

Check the P.O , price. It also need to be changed.
If you have done GR cancel it. and change the P.O price through ME22N and try to post again.

Std price not updating

Hi,
When I am doing cost/mark/relaese for a material. The planned price in the mat master is being updated. But, the std price remains the same. Please help.
Regards,
Umesh

Hi Umesh...,
Check where Posting period/fiscal year for your company code. if posting period/fiscal year is not same as the costing run then you can't update the std price.
To check it go to T.cod CK24 give the period and fiscal year the Click Mark allowance then you will directed to "Price update:organisational measure screen"
check whethere any error is there against your company code if so then click on your company code and then select corresponding costing variant and costing verions in the popup scren and same.
error mark will go. now you can update price for material.
regards.

Couldn't log into SAP System (message 00264) after SAP_BASIS update

Hello,
we performed SAP_BASIS update to SAPKB70023 and get a problem with logon into a SAP system with message 00264 (Status &2 of the user interface &1 missing).
We have a 64-bit non-Unicode system on Solaris/SPARC/Oracle and Kernel level 333.
We tried to import MENUSYST program from note 1285869, but nothing happened at all. The parameter abap/unicode_check we set to "on" but this didn't help us.
So after selecting system record in SAP Logon now we get the initial logon screen with no "new password" button and error 00264 (Status 0020 of the user interface SAPMSYST missing.) and couldn't log into the system.
We have no idea why correct and existing statuses are not working.
Please suggest us what to do to fix this problem.
Thanks in advance!

Check this,
http://forums.sdn.sap.com/thread.jspa?threadID=835278
it may be useful.
Regards,
Ravi

MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER

Hi Experts,
How the MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER?
Scenario : when 2nd system create the invoice,it will create a po in the 1st system.
51 error msg we are getting material does not exists.but the material is available in the receiving plant.
Please suggest

If you say the material master is available in the 1st system (where you create the order), then the material number in the IDOC may not match with the material number in your database.
leading zeros. material number stored as alphanumeris instead of numeric.

Updating a user text field in sap system form in Find Mode

Dear All,
                I created a Edit text field in Sap System form [FormType :149] -Sales Quotation. I want to update a value to the text while clicking OK button in Find Mode. the code is given below.
If pVal.ItemUID = "1" And pVal.FormMode = SAPbouiCOM.BoFormMode.fm_FIND_MODE And (Not pVal.Before_Action) And pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
        oForm = SBO_App.Forms.Item(FormUID)
        oForm.Freeze(True)
        oItem = oForm.Items.Item("txtUID")
        oEdit = oItem.Specific
        oRS = ConSBOdb.Execute("Select * from BG_CAMPAIGNSHDR where CMIDENT ='" & Trim(oEdit.Value) & "'")
        oItem = oForm.Items.Item("txtCampgn")         ' // User created field
        oItem.Enabled = False
        oEdit = oItem.Specific
        If oRS.EOF = False Then
            oEdit.Value = oRS.Fields("CMNAME").Value
        Else
            oEdit.Value = ""
        End If
end if
while clicking the OK button, Based on the value fetched on the screen, I have to open a recordset and get the value. But, the screen loads the value to the system textboxes. I could not get those value to run the Sql in the event. it returns empty. Could any one help please how to solve this ?
Thanks in advance.
Manikandan.

Hi,
Try This..
If pVal.FormType = 149 And pVal.ItemUID = "1" Then
            If pVal.FormMode = SAPbouiCOM.BoFormMode.fm_FIND_MODE Then
                If pVal.Before_Action = False Then
                    If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
                        Try
                            oForm = SBO_App.Forms.Item(FormUID)
                            oForm.Freeze(True)
                            oItem = oForm.Items.Item("txtUID")
                            oEdit = oItem.Specific
                            oRS = ConSBOdb.Execute("Select * from BG_CAMPAIGNSHDR where CMIDENT ='" & Trim(oEdit.Value) & "'")
                            oItem = oForm.Items.Item("txtCampgn") ' // User created field
                            oItem.Enabled = False
                            oEdit = oItem.Specific
                            If oRS.EOF = False Then
                                oEdit.Value = oRS.Fields("CMNAME").Value
                            Else
                                oEdit.Value = ""
                            End If
                        Catch ex As Exception
                            SBO_application.MessageBox(ex.Message)
                        End Try
                    End If
                End If
            End If
        End If
Best Regards,
Mahendra

Std price of material updation in SAP system

Similar Messages

Maybe you are looking for