Step by step MM Configuration

Hi MM Consultants
thanks for your previous support
Can any body provide me step by step MM configuration document.
Regards
Anubhav

Hi,
Please down load the Configuration guide from the below link..
it will show you the standard MM config.
http://help.sap.com/bp_bblibrary/600/html/J05_EN_IN.htm
Thx
Raju

Similar Messages

How To Configure Or Intialize Portal Installed With BI7.0 - Step By Step

Hello Gurus
How do I configure or start working on portals which is installed as part of BI 7.0 installation that is EP and EP Core(Includes BI-JAVA and ABAP Stacks).
Please help me out with possible guidance(if possible Step by Step procedure) how to set up the parameters and at which locations in BI.. I have kept couple of days exploring this site, but I couldnt fine one answer relating.
More over the answers I could find was "To configure technical content, business content and bi admin cockpit," Any help or suggestion provided is grealy appreciated and points will be awarded accrodingly.
Thanking you all gurus in advance,
Regards,
Parvez.

Dear,
Try these links:
http://help.sap.com/bp_epv170/EP_US/BBLibrary/Documentation/N00_BB_Essential_Information_EN_US.doc
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TEP12&COLLECTION=43&LANGUAGE=EN
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
/people/srinivas.gv/blog/2005/11/28/role-and-configuration-of-isolation-methods-in-sap-enterprise-portal
/people/julia.kielbasiewicz/blog/2005/04/17/integration-of-sap-business-warehouse-and-enterprise-portal-150-single-sign-on
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/98e6418b7eca17e10000000a155106/frameset.htm
/thread/189547 [original link is broken]
note: You can as well search in this forum.Im sure there are lots!
Thanks.

Workflow step by step configuration for scheduling level agreement release

Hi All,
        I tried alot to configure step by step scheduling level agreement release using workflow.
        But, The release code I couln't pass using workflow.
        Plz guide me, or let me know some useful links for the same.

/Use the user exit M06E0005 to avoid all this problems.
In this user exit you can add your custopm logic based on your org structure and then workflow will take to all of release one by one.

What steps are required to configure the Payroll Tax ( USA)?

Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.K

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

Please tell me the step by step process of HP Tape drive configuration.

Dear all,
we are using ECC5.0 and windows 2003 server and oracle 9i .Please tell me the step by step process of HP Tape drive configuration. I Think initSID.sap file in to change the parameter,but which parameter configure.Please suggest.
Best Regards,
Thiru

Hello Thiru,
Once the backup completes,tape willl be automatically ejected.
I dont think there is any way by means of which you can see the data stored in the disk but yes what you can do is to run the backup with verify option
This BRBACKUP command option verifies the backup after the files have been backed up
Please refer to following for more info.
http://help.sap.com/saphelp_nw70/helpdata/EN/55/c491f37407e74781bc0ebd96befba7/content.htm
Rohit

How do you Configure Coldfusion MX7 Developer Version Step by Step to an Apache Server?

Please provide exact steps as to how to Configure Coldfusion
MX7 Developer Version Step by Step to an Apache Server Step by
Step. I would be using the latest Apache Server download, which
would be: apache_2.2.4-win32-x86-no_ssl.msi Please provide this
answer ASAP.... Please also provide info on what folders to point
the system to when configuring; in the version I provided it is
rather hard to figure out what folders to use. Right now the way I
did it does not work and I cannot see the administration page when
the Apache Server is Running. Should the Apache Server be Running
while installing? Also I noticed after the first install of Cold
Fusion there is another step for full configuration where you have
to go to the local host page for further configuration. What do you
have to do there? I couldn't even get to that page because I
couldn't access the admin page after I did the installation. Any
help would be very welcome. Thanks in advance.

This looks promising:
http://www.sitepoint.com/article/install-coldfusion-mx-windows
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"spinaweb" <[email protected]> wrote in
message
news:eorrk3$m1g$[email protected]..
> Please provide exact steps as to how to Configure
Coldfusion MX7 Developer
> Version Step by Step to an Apache Server Step by Step. I
would be using
> the
> latest Apache Server download, which would be:
> apache_2.2.4-win32-x86-no_ssl.msi Please provide this
answer ASAP....
> Please
> also provide info on what folders to point the system to
when configuring;
> in
> the version I provided it is rather hard to figure out
what folders to
> use.
> Right now the way I did it does not work and I cannot
see the
> administration
> page when the Apache Server is Running. Should the
Apache Server be
> Running
> while installing? Also I noticed after the first install
of Cold Fusion
> there
> is another step for full configuration where you have to
go to the local
> host
> page for further configuration. What do you have to do
there? I couldn't
> even
> get to that page because I couldn't access the admin
page after I did the
> installation. Any help would be very welcome. Thanks in
advance.
>
>

Step-by-step configuration from XI to R/3 for Idoc to File Scenarious

Hi Gurus,
Am the Beginner in Xi, I tried to connect the Xi to R/3 for Idoc to File Scenario but the connection fails, (error in Rfc showing ), could any one send me the step-by-step sm59 configuration. R/3 version 4.6c and Xi version 3.0
rewards sure
advance thanks
with regards
Thambee

hi,
I connected my 800 r/3 client to 100(xi) client, R/3 client is version 4.6d in it rfc test connection is sucessful but remote logon is not responding in my R/3 model view distributed and it's reflected in xi client, when I push the Idoc from R/3(bd10), Idoc created sucessfuly but not despatched
Idoc message type is 10 and 30.
Second thing am confused with Ip address bcoz 2 ip address in both system one is loopback and anoter one is tcpip adapter which one i have to give is sm59, help me plz
with regards,
Thambe

Step by Step workflow configuration required for PM Notification

Hi All,
as per our requirement we need to trigger workflow when PM Notification Status will be change (Event will trigger for approval when sombody manually change the workflow status)
Kindly guide me step by step for configuration of that

not answered closing thread

Kindly explain the step by step procedure for configuring sales order stock

Hi friends,
can anybody explain the step by step procedure for configuring sales order stock.
Stock that is used for a sales order. It is directly allocated to a sales order. Components can only be used to produce material ordered by the customer and the finished product can only be delivered to the customer via the sales order.
You can manage valuated or non-valuated sales order stock.
If the sales order stock is not valuated, it is managed via a cost collector. The system does not carry out invoice verification postings for goods movements, and you cannot obtain an overview of how the stock is valuated until the end of the settlement period in Controlling.
If the sales order stock is valuated, you have immediate access to its value in Financial Accounting. The assigned accounts are debited and credited as a result of the valuated goods movements.
but i am not clear of how to map it into sap.kindly explain it step by step.
regards,
willaims

Follow the link
this will explain about complete config
http://help.sap.com/bp_bblibrary/600/Documentation/V4J_BB_ConfigGuide_EN_US.doc

Steps required for cin configuration

hi,
can anybody give me the steps required for cin configuration.

Hi,
CIN Setting:
Check Calculation Procedure
In this activity, you can check and, if necessary, change existing procedures for tax calculation.
Standard settings
Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
Note
In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
Recommendation
If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
Activities
If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
Procedure (pricing, output control, acct. det., costing,...)
Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
Example
Procedures are used, for example, in the following applications:
· Pricing in sales and distribution
· Applying overhead in Product Costing (costing sheets) and for CO internal orders
· Calculating accrued costs in Profitability Analysis
· Output control (printed confirmations, EDI messages, electronic mail)
· Account determination
· Calculating taxes on sales/purchases
· Calculating accruals in Cost Center Accounting
· Pricing for resource planning
Definition: condition type
Controlling (CO)
A distinction, in overhead calculation, is made between:
· Base condition types, which determine the object for which the overhead is to be calculated
· Overhead condition types, which define the percentage overhead to be applied
In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
Real Estate Management (RE)
An exact definition of a condition that specifies the amount paid for a specific service.
Condition types include:
· Basic rent
· Advance payment for operating costs
· Pest control
Sales and Distribution (SD)
A characteristic of a condition.
For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
Treasury (TR)
A characteristic of a condition used to classify financial transactions.
Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
Return ->
Definition: condition_type
Condition type
The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
Access sequence
With the access sequence you define
· the condition tables used to access the condition records
· the sequence of the condition tables
· which field contents are the criteria for reading the tables
Assign Country to Calculation Procedure
In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
Requirements
Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
Activities
1. Assign a procedure for tax calculation to every country with which your company has business dealings.
2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
Check and Change Settings for Tax Processing
In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
· Tax type
Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
· Nondeductibility of tax amounts
For this, tax amounts are marked as not deductible.
· Posting indicator
Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
· Tax not relevant to cash discount (Not discount relevant)
This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
Standard settings
Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
Recommendation
Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
Activities
If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
Note
You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
Internal processing key
The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
The processing keys are defined in the system and cannot be changed by the user.
Definition: posting key
Financial Accounting (FI)
A two-digit numerical key that determines the way line items are posted.
This key determines several factors including the:
· Account type
· Type of posting (debit or credit)
· Layout of entry screens
Return ->
Definition: posting_key
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each.
Definition: excise registration
Financial Accounting (FI)
An entity in India that is entitled by law to produce any goods liable to excise.
Each entity is assigned its own excise registration number.
Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
Return ->
Definition: excise registration
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Definition: excise group
Financial Accounting (FI)
A unit within an excise registration, in India, which keeps its own set of excise records.
Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
Return ->
Definition: excise group
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
· Define excise series groups based on type of outgoing document
· Assign series group to excise registration ID
· If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
· If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
Maintain Postal Addresses
Use
In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
You can then define a default local excise department for each excise group and a default customs department for each series group.
Definition: ARE-1 document
Logistics - General (LO)
A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
The form exempts them from paying excise duty when they remove the goods from their premises.
Return ->
Definition: ARE-1 document
Definition: ARE-3 document
Logistics - General (LO)
A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
The ARE-3 states what goods are being removed and which deemed excise license covers it.
Return ->
Definition: ARE-3 document
Maintain Subtransaction Type with Text
Sub Transaction Type
Sub transaction type is used for multiple purposes
Subcontracting:
It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Excise removals
Sub transaction type is also used for determining the accounts while doing excise removals.
With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
· If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
· If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Definition: condition-based excise determination
Logistics - General (LO
A method that the system uses of determining excise duty in India.
This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
Return ->
Definition: condition-based excise determination
Definition: formula-based excise determination
Logistics - General (LO)
A method that the system uses of determining excise duty in India.
This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
Return ->
Definition: formula-based excise determination
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
· Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
· Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
· Specify the conditions in the sales order that are used for excise rates.
· Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
Definition: basic excise duty
Financial Accounting (FI)
The main type of excise duty in India.
It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
Return ->
Definition: basic excise duty
Definition: additional excise duty
Financial Accounting (FI)
A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
Return ->
Definition: additional excise duty
Definition: special excise duty
Financial Accounting (FI)
A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
Return ->
Definition: special excise duty
Definition: cess
Financial Accounting (FI)
In India, a tax on the manufacture of certain products, mostly foodstuffs.
Return ->
Definition: cess
Definition: countervailing duty
Financial Accounting (FI)
A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
Return ->
Definition: countervailing duty
Define Tax Code for Purchasing Documents
Use
In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities
Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
Sales Tax Code
The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
Procedure
For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
Note
You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
Definition: tax code
Financial Accounting (FI)
A two-digit code that represents the specifications used for calculating and displaying tax.
Examples of the specifications defined under the tax code are:
· Tax rate
· Type of tax (input tax or output tax)
· Calculation method (percentage included or percentage separate)
Return ->
Definition: tax_code
Definition: tax rate
Financial Accounting (FI)
The percentage rate used to calculate the tax amount.
Return ->
Definition: tax_rate
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
· For taxes on purchases, use the condition types contained in the tax procedure.
· For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
Maintain Chapter IDs
Use
In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
Definition: chapter ID
Logistics - General (LO)
The number given to a material in the schedules of materials published by the government of India.
The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
Each material in the schedule is assigned its own identification code, called "chapter ID."
Example
The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
Return ->
Definition: chapter ID
Assign Users to Material Master Screen Sequence for Excise D
Use
In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
Standard settings
Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
Activities
1. Double-click User Screen Reference.
2. Assign all users who need to see the excise duty information to the screen reference IN.
Example
Name Screen Reference
MISHRA IN
Screen Sequence Number
Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
Note
When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
Dependencies
You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
Screen reference depending on the user
Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
Definition: user master record
User and Authorization Management (BC-SEC-USR)
Record that contains important master data for a user in the SAP System.
The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
Return ->
Definition: user_master_record
Define Form Types
Use
In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
Example
· Form type: CT3
· Form description: Concessional tax form
· Status: Receive
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
· VS1 (basic excise duty)
· VS2 (additional excise duty)
· VS3 (special excise duty)
· VS5 (sales tax setoff)
· MWS (central sales tax)
· MW3 (local sales tax)
· ESA (service tax)
· ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hold account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
· Excise group
· Company code
· Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
· Defined the G/L accounts
· Defined the excise groups
· Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Define Processing Modes Per Transaction
Use
In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
This way, you can tailor the transaction to what your users have to do.
Standard settings
The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
· J1IEX_C
This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
· J1IEX_P
This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
· J1IEX
In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
Activities
If the standard settings meet your requirements, do not do anything.
Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
2. In this activity, enter data as follows:
o Tcode: The transaction code that you have just created.
o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
o Active: Select this indicator to activate the setting.
Example
You might want to create a transaction that only allows users to display excise invoices.
Define Reference Documents Per Transaction
Use
In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
Activities
If the standard settings meet your requirements, you do not have to do anything.
Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
Definition: excise invoice reference document
Logistics - General (LO)
A document, in India, that you refer to when you enter an incoming excise invoice.
If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
Example
In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
Return ->
Definition: excise invoice reference document
Maintain Rejection Codes
Use
In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
Activities
For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
Specify Which Movement Types Involve Excise InvoicesUse
In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
Note
This option cannot be used for processing goods receipts without purchase orders.
Maintain Default Excise Groups and Series Groups
Use
In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
Activities
This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
Use
The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
Requirements
Before you continue with this activity, work through the following activities:
· Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
Maintain the Program, FORM routine, and the form for the output type.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
Enter the output device that you use.
Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
Maintain Movement Type Groups
Use
In this IMG activity, you group movement types together to form movement type groups.
Definition: movement type
Inventory Management (MM-IM)
A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
Return ->
Definition: movement type
Utilization Determination
Use
In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
You can either:
· Debit all the excise duty to one account
· Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
Example
If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
Acct name BED perc.
RG 23A BED account 50
RG 23C BED account 50
Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
Acct name BED perc. +
RG 23A BED account X
RG 23C BED account X
When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
Maintain Minimum Balances for Excise Accounts
Use
In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
Activities
Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
Specify SAPscript Forms
Use
In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
Standard settings
Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
Reg. name Lay. no. Form Tcode/Prog
RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
PLA 1 J_2I_PLA J_2IPLA
RG 23 D 1 J_2I_RG23D J_2IRG23
RG 1 1 J_2I_RG1 J_2IRRG1
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_3 J_2IRT12
The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
Number Ranges
You can maintain the number ranges for all CIN Number range objects using this transaction
Activities
Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
1. j_1iintnum
At an Excise group
1. j_1irg23a1
2. j_1irg23a2
3. j_1iRG1
4. j_1irg23c1
5. j_1irg23c2
6. j_1ipla2
7. j_1iintpr2
8. j_1irg23d
9. j_1irg1_t ( material level)
10. j_1iconpla ( if Consolidated PLA is used )
At Series group
1. j_1iexcloc
2. j_1iexcexp
3. j_1idepinv
4. j_1i57Fc ( 57F Challans

Fund Management-Configuration guide step by step

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Dear Sap gurus,
Please send Fund management configuration guide step by step.
Its very urgent.
Thanks in Advance,
Sree

Hi
Funds management :
Funds Management allows management to set budgets for revenues and expenses within your company as well as track these to the area of responsibility.
http://ot.bloomu.edu/Documents/SAP/Word%20Docs/New/SAPReportsJan2006.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIFM/FIFM.pdf
nagesh

AEBS (4g) WD my passport work as NAS/FTP step by step configuration for novice in AirPort Utility Win Xp/iOS.

AEBS (4g) WD my passport work as NAS/FTP step by step configuration for novice in AirPort Utility Win Xp/iOS.
First off all, is this possible to configure this to work over net? Next i need help in configurating ports, etc. I don't find solution in other topics. Sorry for my English!

Extractor configuration step by step

I all,
where can I find a step by step guide about the BI extractor configuration to transfer data from SAP HR to SAP BI?
Thanks

hi,
refet to this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
hope it helps,
regards,
Parth.

Step by Step DR Configuration

Dear All
I want to configure DR Server from Scrach, my production server Working Excellently , with it i want to Stand DR Server ,
Plz tell me Step by step configutaion to built DR server
Best Regard
Imran Khan

hi markus
i have Stand DR same as PRD,
i have started recover database as describe bellow
Archive started PRDARCHARC05846_0657865393.001
ended PRDARCHARC05871_0657865393.001
SQL> startup mount
ORACLE instance started.
Total System Global Area 1526726656 bytes
Fixed Size                  2053752 bytes
Variable Size             771754376 bytes
Database Buffers          738197504 bytes
Redo Buffers               14721024 bytes
Database mounted.
SQL> recover database using backup controlfile;
ORA-00279: change 43466897 generated at 10/28/2008 13:13:57 needed for thread 1
ORA-00289: suggestion : F:\ORACLE\PRD\ORAARCH\PRDARCHARC05846_0657865393.001
ORA-00280: change 43466897 for thread 1 is in sequence #5846
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00279: change 43482134 generated at 10/28/2008 13:40:50 needed for thread 1
ORA-00289: suggestion : F:\ORACLE\PRD\ORAARCH\PRDARCHARC05847_0657865393.001
ORA-00280: change 43482134 for thread 1 is in sequence #5847
ORA-00278: log file 'F:\ORACLE\PRD\ORAARCH\PRDARCHARC05846_0657865393.001' no
longer needed for this recovery
ORA-00279: change 43655018 generated at 10/29/2008 09:21:20 needed for thread 1
ORA-00289: suggestion : F:\ORACLE\PRD\ORAARCH\PRDARCHARC05872_0657865393.001
ORA-00280: change 43655018 for thread 1 is in sequence #5872
ORA-00278: log file 'F:\ORACLE\PRD\ORAARCH\PRDARCHARC05871_0657865393.001' no
longer needed for this recovery
ORA-00308: cannot open archived log
'F:\ORACLE\PRD\ORAARCH\PRDARCHARC05872_0657865393.001'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL>
plz tell me my DR server working Or something wrong with

FSV step by step configuration

kindly send me step by step configuration of FSV- deleted
Kindly tell the process of settling Internal order to AUC and then to main asset
I am looking for the step like expense booking to Internal order
then internal order to AUC
Then AUC to Asset settlement
Moderator: Respect the rules and don't put your e-mail in the messages

Hi,
GO to KO02 (change Internal Order) enter IO and press enter
Then Click on Settle Rule, Select FXA as order type and enter CWIP in Settlement Receiver.
Now, GO to KO88 for settlement of Internal Order select Settlement Period and Fiscal Year and execute.
System will pass the following entry;
Dr CWIP (AUC)
Cr Expense.
Here your expense will be reversed and loaded on CWIIP or AUC.
Now, next step is to Trf AUC to main Asset. Follow following step for this.
Go To AIAB and enter the CWIP (AUC) Asset Code and execute.
then define the settlement rule there and enter the Main Asset Code. Select the line item and execute.
Now automatically you will reach to new screen which is nothing but AIBU.
Here enter the posting date, document date etc and simulate the Transaction.
Following entry will show in simulation i.e
Dr Main Asset
Cr CWIP
Hope it solves your problem. Allot points if useful.
Regards,
Ankur

Boundaries configuration in SCCM 2012. Step-by-Step doc, link

Hello MS team,
I have a client that currently has one boundary configured in their SCCM 2007 environment that uses the Default_First-Site-Name.
This client needs to reconfigure this in SCCM 2007 as there should not be any overlapping Boundaries in SCCM 2007 and 2012.
Once all of the required boundaries are configured in the company and there are no overlapping boundaries in SCCM 2012 environment, they can then enable client
push to take advantage of this automated deployment method.
Can you please provide me with the steps for configure boundaries in SCCM and AD?
AD only has the default_First-Site-Name, therefore no multiple sites
Please, indicate step by step all the work and tasks required to be executed in AD and SCCM 2012
Franki

Boundaries are not conidered to be overlapping if they are in two seperate hierarchies.
Automatic lcient push won't work if the 2007 client is already installed.
You don't have to set anything up in AD. Just use ip ranges.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Step by step MM Configuration

Similar Messages

Maybe you are looking for