Boundaries configuration in SCCM 2012. Step-by-Step doc, link

Hello MS team,
I have a client that currently has one boundary configured in their SCCM 2007 environment that uses the Default_First-Site-Name.
This client needs to reconfigure this in SCCM 2007 as there should not be any overlapping Boundaries in SCCM 2007 and 2012.
Once all of the required boundaries are configured in the company and there are no overlapping boundaries in SCCM 2012 environment, they can then enable client
push to take advantage of this automated deployment method.
Can you please provide me with the steps for configure boundaries in SCCM and AD?
AD only has the default_First-Site-Name, therefore no multiple sites
Please, indicate step by step all the work and tasks required to be executed in AD and SCCM 2012
Franki

Boundaries are not conidered to be overlapping if they are in two seperate hierarchies.
Automatic lcient push won't work if the 2007 client is already installed.
You don't have to set anything up in AD. Just use ip ranges.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Similar Messages

SQL Server 2012 deployment with System Center Configuration Manager (SCCM) 2012

hi,
we have tried to deploy the SQL Server 2012 to our development machines with SCCM 2012 without success.
Commandline parameters or Configuration.ini in either case the installation failed without any useful errorlog.
Exists any howto which covers this scenario?
regards
genne

Hello,
Please see the following article about some requirements for SQL Server instances intended for SCCM 2012:
http://www.sqlcoffee.com/Tips0019.htm
Could please check to see if a Summary.txt log file exists after those installation attempts? The following article may help you locate the file on disk:
http://technet.microsoft.com/en-us/library/ms143702(v=sql.110)
Please share this log file with us, if possible.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Exchange configuration in SCCM 2012

Hi All,
I was configuring Exchange server connectors on SCCM 2012 SP1 & our organization is using office 365 as exchange so, how do we configure this.
There are options for on premise exchange server & hosted exchange server where should i put this.
Thanks,
Pranay.

Thanks Jorgen, the post was great.
Configured the settings as per the link but got this error in Easdisc.log
ERROR: Failed to initialize managed com instance. Error = Unknown error 0x80131501, -2146233087~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.516-330><thread=3472 (0xD90)>
INFO: End to process for discovery https://outlook.com/PowerShell-LiveID. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.516-330><thread=3472 (0xD90)>
INFO: CRC for SCF not changed. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.771-330><thread=7388 (0x1CDC)>
INFO: Raise Exchange Connector connection failure alert. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:21.817-330><thread=7388 (0x1CDC)>
INFO: CRC for SCF not changed. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:22.082-330><thread=7388 (0x1CDC)>
INFO: Waiting 3600 seconds for SCF update notification... $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:26:22.082-330><thread=7388 (0x1CDC)>
INFO: Start to process wipe/policy https://outlook.com/PowerShell-LiveID. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:24.767-330><thread=6924 (0x1B0C)>
INFO: [MANAGED] Initialize: ExchangeServer https://outlook.com/PowerShell-LiveID, Account (Admin Account Email id), VerboseLog 0~~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:27.780-330><thread=6924 (0x1B0C)>
ERROR: [MANAGED] Failed to open Runspace. Exception: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : The WinRM client received an HTTP status code of 301 from the remote
WS-Management service. For more information, see the about_Remote_Troubleshooting Help topic.~~ at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()~~ at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult
asyncResult)~~ at System.Management.Automation.Runspaces.RunspacePool.Open()~~ at System.Management.Automation.RemoteRunspace.Open()~~ at Microsoft.ConfigurationManager.ExchangeConnector.ExchangeRunspace.InitRunspace()~~
$$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.656-330><thread=6924 (0x1B0C)>
ERROR: Failed to call Initialize of managed COM. error = Unknown error 0x80131501~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.657-330><thread=6924 (0x1B0C)>
INFO: Raise Exchange Connector connection failure alert. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.765-330><thread=6924 (0x1B0C)>
ERROR: Failed to initialize managed com instance. Error = Unknown error 0x80131501, -2146233087~ $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.765-330><thread=6924 (0x1B0C)>
INFO: End to process wipe/policy https://outlook.com/PowerShell-LiveID. $$<SMS_EXCHANGE_CONNECTOR><10-07-2013 13:28:31.765-330><thread=6924 (0x1B0C)>
Thanks,
Pranay.

Compliance evaluation cycle in not running as configured in SCCM 2012 R2

Hi,
We want to test compliance setting feature in SCCM 2012 R2. We have enable compliance setting in client setting with every 1 hour of evaluation cycle.
We have configure compliance baseline to check registry key.
Compliance baseline is configured to evaluate every 1 hour, but observed that clients are not evaluating as configured. Tried to running Machine policy evaluation cycle at client side but still not getting result.
So please help to understand why not clients are evaluating compliance evaluation cycle every 1 hour or let me know how to force client to evaluate the compliance cycle.
Also it observed that some clients are evaluating the compliance cycle but not as configured.

As I mentioned above I have configure baseline to check registry key at client side, If it is 1 then show it as compliant.
If you configured a simple schedule of every 1 hour, that means each client will run the baseline every hour but exactly
when will be determined by each client individually so there will be no set time when they run. Can you please elaborate this?
What will be the best compliance evaluation cycle we can set to give desired result?

SCCM 2012 SSRS modify default reporting Link

Hi,
We have a requirement in SCCM 2012 reporting to change the default reporting link (http://netbiosname/reports ) to (http://fqdn/reports ) , the reason is users from
a different domain are not able to access the link with NetBIOS name when the link is sent to them from a report subscription.
How do we modify the default reporting link to show with FQDN instead of NetBIOS name ?
Tried :
We have tried to add the FQDN on the SQL SSRS - restarted SQL reporting services - restarted IIS - restarted SMS service , but still the FQDN report link wont show up on the SCCM console.
Also tried to make changes in SSRS config file but now luck.

Hi,
>>We have tried to add the FQDN on the SQL SSRS - restarted SQL reporting services - restarted IIS - restarted SMS service , but still the FQDN report link wont show up on the SCCM console.
Please add the FQDN as the screenshot below and remove the existing one. Reinstall the Reporting Services Point after add the FQDN.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

NETWORK PRINTER INVENTORY IN SYSTEM CENTRE CONFIGURATION MANAGER (SCCM 2012).

SCCM HW inventory agent runs as the ‘SYSTEM’ and cannot see the end-users network drives and printers. The following two step process will help circumvent the above stated limitation.
1) CREATE HKEY_LOCAL_MACHINE\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS PATH IN THE REGISTRY.
Create a SCCM package.
The package should run as administrator.
The package should run whether or not a user is logged on.
POWERSHELL PACKAGE 1 (Prerequisite):
if (!(Test-Path HKLM:\SOFTWARE\SCCMINVENTORY)) {new-item HKLM:\SOFTWARE\SCCMINVENTORY -ErrorAction SilentlyContinue}
$perm = get-acl HKLM:\SOFTWARE\SCCMINVENTORY -ErrorAction SilentlyContinue
$rule = New-Object System.Security.AccessControl.RegistryAccessRule("Authenticated Users","FullControl", "ContainerInherit, ObjectInherit", "InheritOnly", "Allow") -ErrorAction SilentlyContinue
$perm.SetAccessRule($rule)
Set-Acl -Path HKLM:\SOFTWARE\SCCMINVENTORY $perm -ErrorAction SilentlyContinue
if (!(Test-Path HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS)) {new-item HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS -ErrorAction SilentlyContinue}
SAVE POWERSHELL FILE AS: PrinterInvRegSetup.ps1
SETUP THE SCCM PACKAGE/PROGRAM WITH COMMAND LINE:
%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\PowerShell.exe -NonInteractive -WindowStyle Hidden -noprofile -ExecutionPolicy Bypass -file .\PrinterInvRegSetup.ps1
2) CAPTURE CURRENT USER’S PRINTERS AND WRITE THOSE ENTRIES TO THE ABOVE CREATED REGISTRY KEYS.
Create a SCCM package
The package should be run only when a user is logged in.
POWERSHELL PACKAGE 2 (Main):
$printers = Get-WMIObject -class Win32_Printer -ErrorAction SilentlyContinue|select-Object -Property ServerName,ShareName,Location,DriverName,PrintProcessor,PortName,Local |Where-Object {$_.Local -ne $true}-ErrorAction SilentlyContinue
ForEach($printer in $printers){
$PServerName= $printer.ServerName -replace ('\\','')
$PShareName = $printer.ShareName
$PLocation = $printer.Location
$PDriverName = $printer.DriverName
$PPrintProcessor = $printer.PrintProcessor
$PPortName = $printer.PortName
if ((Test-Path HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS)) {
if ((Test-Path "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName")) {
Remove-item "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Force -ErrorAction SilentlyContinue
New-item "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrintServer" -Value $PServerName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterQueue" -Value $PShareName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterLocation" -Value $PLocation -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterDriver" -Value $PDriverName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrintProcessor" -Value $PPrintProcessor -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterPortName" -Value $PPortName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "DateInventoried" -Value $(get-date) -PropertyType "String" -ErrorAction SilentlyContinue
SAVE POWERSHELL FILE AS: NetworkPrinterInventory.ps1
SETUP THE SCCM PACKAGE/PROGRAM WITH COMMAND LINE:
%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\PowerShell.exe -NonInteractive -WindowStyle Hidden -noprofile -ExecutionPolicy Bypass -file .\NetworkPrinterInventory.ps1
3) CREATE A DEPLOYMENT AND SET IT TO ‘RUN ALWAYS’ AND MAKE IT A REQUIREMENT.
Now deploy the second package and set the first package as a prerequisite (Check the box – Always run the prerequisite package)
The deployment should be set to run every 4 hours and ‘Always rerun’. Mark the deployment as required.
4) ADD THE FOLLOWING IN BETWEEN THE EXTENSION SECTION WITHIN YOUR CONFIGURATION.MOF.
//========================
// Added extensions Start
//========================
#pragma namespace ("\\\\.\\root\\cimv2")
#pragma deleteclass("NETWORKPRINTERS", NOFAIL)
[dynamic, provider("RegProv"), ClassContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\SCCMINVENTORY\\NETWORKPRINTERS")]
Class NETWORKPRINTERS
[key] string KeyName;
[PropertyContext("PrintServer")] String PrintServer;
[PropertyContext("PrinterQueue")] String PrinterQueue;
[PropertyContext("PrinterLocation")] String PrinterLocation;
[PropertyContext("PrinterDriver")] String PrinterDriver;
[PropertyContext("PrintProcessor")] String PrintProcessor;
[PropertyContext("PrinterPortName")] String PrinterPortName;
[PropertyContext("DateInventoried")] String DateInventoried;
//========================
// Added extensions end
//========================
5) SAVE THE BELOW DATA INTO A FILE CALLED ‘AWESOME.MOF’.
#pragma namespace (“\\\\.\\root\\cimv2\\SMS”)
#pragma deleteclass(“NETWORKPRINTERS”, NOFAIL)
[SMS_Report(TRUE),SMS_Group_Name("NETWORKPRINTERS"),SMS_Class_ID("NETWORKPRINTERS")]
Class NETWORKPRINTERS: SMS_Class_Template
[SMS_Report(TRUE),key] string KeyName;
[SMS_Report(TRUE)] String PrintServer;
[SMS_Report(TRUE)] String PrinterQueue;
[SMS_Report(TRUE)] String PrinterLocation;
[SMS_Report(TRUE)] String PrinterDriver;
[SMS_Report(TRUE)] String PrintProcessor;
[SMS_Report(TRUE)] String PrinterPortName;
[SMS_Report(TRUE)] String DateInventoried;
6) IMPORT ‘AWESOME.MOF’ INTO SCCM DEFAULT CLIENT SETTINGS.
Either import the above MOF file into the Client Setting/Default Client Settings/Hardware Inventory/Classes/Import. Select the option to import every thing.
Alternatively, if you have compiled the MOF manually on the PC, Add a new reporting class by clicking the ‘Add’ button and connecting to the PC and selecting the WMI class ‘NETWORKPRINTERS‘
and that is it. The SCCM resource explorer should soon see the Network Printers.
Now, this is a convoluted process but this is the only way I can inventory Network printers. Any ideas or suggestions?

All the other ways are similar because this is a per-user setting.
http://blogs.technet.com/b/breben/archive/2013/08/26/inventory-mapped-drives-in-configmgr-2012.aspx
Juke Chou
TechNet Community Support

Workgroup Client Installation & configuration in SCCM 2012

Hi,
i have an internal domain named ECC-OCT.local which has internal IP 10.0.8.45 and SCCM server IP 10.0.8.47.
i have been installed SCCM Client Agent on a workgroup server manually but the site code not approved
(why ?).
Keep in mind that the DNS for the workgroup server was my public DNS Server which configured to hold secondary zone
for internal domain ECC-OCT.local.
If i assigned the 3rd dns server (on network card configuration) to ip 10.0.8.45 , the site code retrieved successfully.
what can i do to solve this issue?

Hi,
Based on your description, I recommend you check the MP record in DNS:
The SRV record must has been registered in DNS.
SRV record is published in DNS
Also, you can edit the LMHOSTS and HOSTS files on each client for the site code retrieve.
Managing System Center Configuration Manager clients in a workgroup
http://blogs.technet.com/b/configurationmgr/archive/2010/03/01/managing-system-center-configuration-manager-clients-in-a-workgroup.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 - Unable to locate any configured SRS

I got this error while configuring the SCCM 2012 "Reporting Point"
Please advise what is the problem even I install the reporting service in SQL
Configuration Manager
Unable to locate any configured SRS instances on the server. Verify SRS is installed, accessible, and correctly configured.
Current Setup:
SCCM Server - SCCM 2012 SP1
Database Server - SQL Server 2008 10.0.5828.0

See here for troubleshooting tips:
http://www.windows-noob.com/forums/index.php?/topic/5486-cannot-install-reporting-point-role-sccm-doesnt-see-reporting-services/
Mike Crowley | MVP
My Blog --
Planet Technologies

Editing Configuration.MOF For Network Printers/Mapped Drives SCCM 2012?

Question is in Configuration Manager 2007 I would edit the SMS Def MOF file and then run Datashift.vbs on all the clients to add a WMI class for mapped drives for inventory. So most of my clients that I upgraded to 2012 already have that class added
to WMI. I just need to figure out what I need to do on the new server and Configuration.MOF (since SMS Def is missing in 2012) to tell it to collect the newly added classes during hardware inventory. I see that you can click on Set Classes in the client settings
but I don't see where you can check mapped drives or network printers there.

There is no out-of-box solution to handle this task.
But try this. This has worked for us really well. We've got 22000 machines inventoried.
http://social.technet.microsoft.com/Forums/en-US/c08c393d-1ea4-4f6b-8f07-affc0f743193/network-printer-inventory-in-system-centre-configuration-manger-sccm-2012?forum=configmanagergeneral#c08c393d-1ea4-4f6b-8f07-affc0f743193

Configure SUSDB_log.ldf Autogrowth Size on SCCM 2012 Standalone Primary Site Server

I have configured the rest of my .ldf log files for SCCM use according to best practices by SCCM MVPs, but I have not read anywhere that states how I should go about configuring the auto growth for the WSUS database log file (susdb_log.ldf) itself.
If someone can offer some guidance here, I would greatly appreciate it.
Thanks

Thanks Torsten.
So after I run the first full sync, I can just use that value to set the initial size like you stated and then use some other value to set the growth rate? There is only about 1,000 clients in this organization and I want to get this WSUS db log file configured
prior to installing the SCCM primary site on the server. I have used Kent Agerlund's instructions on pre-configuring the SCCM 2012 R2 database and everything looks good there, but just wanted to know how to go about NOT using that 2TB default limit on the
SUSDB_log. What is a good rule of thumb to use to determine the file growth value? Like 2x or 3x the initial value size?
Thanks

SCCM 2012 Client.msi Fails

I am able to install the SCCM client on many machines, but two machines are failing. First I looked in ccmsetup.log:
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action:
ErrorMessages:
]LOG]!><time="16:25:20.476+00" date="03-16-2013" component="ccmsetup" context="" type="3" thread="1512" file="msiutil.cpp:860">
<![LOG[Next retry in 120 minute(s)...]LOG]!><time="16:25:20.507+00" date="03-16-2013" component="ccmsetup" context="" type="0" thread="1512" file="ccmsetup.cpp:7554">
Then i looked at client.msi.log for more detail, and searced for "return value 3". This log file is hug so i included an excerpt from it. Let me know where to look in the log file for more descriptive text.
[15:43:48] Automatic Delayed Start configuration is enabled for CCMEXEC
MSI (s) (70:64) [15:43:48:682]: Executing op: CustomActionSchedule(Action=CcmRegisterWinTaskRollback,ActionType=3329,Source=BinaryData,Target=CcmRegisterWinTaskRollback,)
MSI (s) (70:64) [15:43:48:697]: Executing op: ActionStart(Name=CcmRegisterWinTask,Description=Registers tasks with Windows Task Scheduler.,)
MSI (s) (70:64) [15:43:48:697]: Executing op: CustomActionSchedule(Action=CcmRegisterWinTask,ActionType=3073,Source=BinaryData,Target=CcmRegisterWinTask,)
MSI (s) (70:64) [15:43:48:697]: Creating MSIHANDLE (24379) of type 790536 for thread 1892
MSI (s) (70:10) [15:43:48:697]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6477.tmp, Entrypoint: CcmRegisterWinTask
MSI (s) (70!24) [15:43:48:713]: Creating MSIHANDLE (24380) of type 790531 for thread 3620
MSI (s) (70!24) [15:43:48:713]: Closing MSIHANDLE (24380) of type 790531 for thread 3620
[15:43:48] Registering windows task 'Configuration Manager Idle Detection'
MSI (s) (70:10) [15:43:48:713]: Closing MSIHANDLE (24379) of type 790536 for thread 1892
CustomAction CcmRegisterWinTask returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (70:64) [15:43:48:760]: User policy value 'DisableRollback' is 0
MSI (s) (70:64) [15:43:48:760]: Machine policy value 'DisableRollback' is 0
Action ended 15:43:48: InstallFinalize. Return value 3.
MSI (s) (70:64) [15:43:48:838]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1114668398,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (70:64) [15:43:48:838]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (70:64) [15:43:48:838]: Executing op: DialogInfo(Type=1,Argument=Configuration Manager Client)
MSI (s) (70:64) [15:43:48:838]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (70:64) [15:43:48:838]: Executing op: ActionStart(Name=CcmRegisterWinTask,Description=Registers tasks with Windows Task Scheduler.,)
MSI (s) (70:64) [15:43:48:838]: Executing op: ProductInfo(ProductKey={D6804B3A-BFEC-4AB4-BFA5-FD9BECC80630},ProductName=Configuration Manager Client,PackageName=client.msi,Language=1033,Version=83893884,Assignment=1,ObsoleteArg=0,,,PackageCode={59A0EA77-D28C-4286-83A6-04BB57B9CDD6},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (70:64) [15:43:48:838]: Executing op: ActionStart(Name=CcmRegisterWinTaskRollback,Description=Rolls back the changes made by CcmRegisterWinTask.,)
MSI (s) (70:64) [15:43:48:838]: Executing op: CustomActionRollback(Action=CcmRegisterWinTaskRollback,ActionType=3329,Source=BinaryData,Target=CcmRegisterWinTaskRollback,)
MSI (s) (70:64) [15:43:48:838]: Creating MSIHANDLE (24381) of type 790536 for thread 1892
MSI (s) (70:8C) [15:43:48:838]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6504.tmp, Entrypoint: CcmRegisterWinTaskRollback
MSI (s) (70!DC) [15:43:48:853]: Creating MSIHANDLE (24382) of type 790531 for thread 3548
MSI (s) (70!DC) [15:43:48:853]: Closing MSIHANDLE (24382) of type 790531 for thread 3548
MSI (s) (70:8C) [15:43:48:853]: Closing MSIHANDLE (24381) of type 790536 for thread 1892
[15:43:48] Removing windows task 'Configuration Manager Idle Detection'
From successfully installation i typically see folders created in C:\Windows\CCM\* but in this particular case there are only a couple .tmp files and other misc. Where should i look next? I have tried ccmsetup.exe /uninstall and then ccmsetup.exe
/mp:<machine> SMSSITECODE=<code> /noservice and also with /service.
I have tried winmgmt /resetrepository
I have checked that BITS service is running.
What else should i look for?
thanks

Did someone able to find the root cause of it and able to it resolve it, i'm currently facing the same issue:
Error 1904. Module C:\Windows\CCM\DCMADQueryProvider.dll failed to register.
HRESULT -2147024703. Contact your support personnel"
This error is not
restricted to any 1 dll but it's random like DCMADQueryProvider.dll,
statusagent.dll, ccmcore.dll
•I'm getting this error while installing
SCCM 2012 client.
Steps i tried:
1.I did try manually registering
oringinally but when the client fails to install, it removes all the source
files including the ccmcore.dll. So, ccmcore.dll doesn't reside on the system
after failing to install the client or at least not that I can see.
2. I
have tried timing it just right so that my "regsvr32 ccmcore.dll" is run during
the install process while the file is in the CCM folder but that didnt work
either.
3. I had manually created the directory CCM\x64\ccmcore.dll and
copied the file from a working client and try to register but it gave me an
error " Failed to load .dll"
4. i have tried uninstalling the client from
ccmclean and tried to reinstall it but still it fails.
Currently not sure what is wrong with the client install, so still
investigating the issue, please help if someone was able to solve the issue.
There are some
articles out there which points to resolving this issue by registering
ATL.dll.
However, in this
case ATL.dll has been registered only 1 times using regsvr32.exe (system32 and
syswow64 folders).
Based on procmon :
HKCR\Wow6432Node\CLSID\{44EC053A-400F-11D0-9DCD-00A0C90391D3}\InprocServer32\
While installing, it was looking for ATL.DLL and found the location from
registry as "“%systemroot%\system32\atl.dll”

How to Custom Report using sql server report builder for SCCM 2012 SP1

Hi ,
I am new to database, if i want to create a manual report using sql server report builder for SCCM 2012 SP1, what step should i take.
i want to create a report in which computer name, total disk space, physical disk serial no come together. i already added class (physical disk serial no.) in hardware inventory classes. refer snapshot

Hi,
Here is a guide on how to create custom reports in Configuration Manager 2012, it is a great place to start, change to the data you want to display instead.
http://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 SP1 - R2 Upgrade Incl Windows ADK for Windows 8.1 Update

Hi All
I Need some advice
We are preparing for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
Quick steps:
1 Uninstall ADK 8.0
2 Install ADK 8.1
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
But today I read the following article
http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
How does this update fit in the upgrade process (add step 7 and install this update on the SCCM Server) , or is it better to leave this update because windows PE5.1 is not supported yet.
I hope someone can give me some good advice
regards and thx in advance
Johan

Hi All
So I can also use the ADK 8.1 Update with the installation , so my quick steps will be than for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
1 Uninstall ADK 8.0
2 Install the ADK 8.1 UPDATE
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
Regards
Johan

Adobe Creative Cloud Enterprise Deployment Issues using SCCM 2012 R2

Hi,
I have been trying to deploy Adobe Creative Cloud Enterprise to Windows 8.1 machines that are identical, using SCCM 2012 R2.
The Adobe package seems fine, because it seems to deploy successfully to some machines. And SCCM 2012 R2 has been configured correctly, as I can deploy other software using it, and again, it deploys Adobe CC successfully to some of the machines.
I have tried comparing the package that is downloaded on the test machine/client machine, with the original package on the distribution point, using Beyond Compare, and there are no differences.
I have contacted Adobe Enterprise Support, and they asked me to send to them log files from Event Viewer, the msi installer, and other Adobe logs, from the machine that failed the deployment. However, after Adobe studying them, they told me that they could not identify any problems... Strange, because I could have sworn that I saw error 1603 pop up over 20 times on different machines indicating that the 'Set-up.dat' file had a problem with it.
After all the testing on over 20 identical machines (same hardware/same software), using different configurations on SCCM 2012 R2 and the client machines, I still can't seem to have a reliable solution to deploying Adobe CC.
The fact that it deploys successfully on one machine and fails on another, or sometimes deploy to two machines and fail on another (simultaneously), is something that I don't understand.
Another thing is that, if I retry the deployment 10-15 times after it failed the first time, it might go through...
Adobe Enterprise Support asked me if they could remote into a machine that failed the deployment to have a look at it and I agreed to that option, but it seems like my issue has been ignored because they never got back to me.
Has anyone had this kind of problem or anything similar before?
I need to be able to deploy this remotely to 100+ machines. So installing manually is not an option.
Any help is appreciated.
This was posted in the wrong section a few days ago. I'm hoping I can get some help here.
Case Number: 1862659812
UPDATE: I spoke to Adobe Customer Support and after 1.5 hours on the phone with a remote session going on, problem was still not solved or identified. Additional log files have been sent and now I'm waiting for a call back.

Hi Robert,
We seem to be having a very similar issue. Our installs would randomly fail with error code 1603 and an error message about a fault in Set-up.dat. Failure rate was near 95% on our 900 machines. Adobe Support and Karl having been looking into our issues but so far no solution has been found.
Having done a lot of investigating we've managed to deploy our package using a schedule task running as a domain admin. This is a nasty solution and we don't intend on using this permanently, but we needed to get the package out.
Are you seeing any of the following:
Entries in PDApp.log:
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The Bootstrapper Process is (5).Stopping the installation process.
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to find the pdb database.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to get the local payload database handle.
Event Log:
Faulting application name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Faulting module name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Exception code: 0xc0000005
Fault offset: 0x000d7c52
Faulting process id: 0xb40
Faulting application start time: 0x01d072a073861622
Faulting application path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Faulting module path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Report Id: c86d9216-de93-11e4-8284-782bcb99e284
Faulting package full name:
Faulting package-relative application ID:
Installer Log
Indicates it can't find the Media_db. We noticed that the folder C:\Program Files (x86)\Common Files\Adobe\caps doesn't get created on the machines were the install fails, so error message is correct in that there isn't a Media_db.db. Sysinterals Process Monitor seems to show that the setup tried to create the folder/files but they don't actually get created. Copying a Media_db into the folder from another machine seems to allow the installation to almost finish, but unsurprisingly you end up with problems later on.

Windows 8.1 laptop computer not showing in SCCM 2012 devices collection

Hi,
I am trying to do a POC on license management from SCCM 2012. I have configures a SCCM 2012 server and intune subscription also. I have Android, iOS and desktop apps uploaded (.msi). when I enrolled android and ios devices its shows up in SCCM,
devices collection but do not show in Intune.
my company portal is nicely coming up on android and iOS tabs. on the other hand company portal showing only Web apps, on a win8.1/7 laptop.
When I tried to enroll 2 windows 8.1/ 7 laptop (intel x86), they donot show up in SCCM. clients of intune manually installed, endpoint protection of SCCM installed also on both boxes.
I tried updating membership in SCCM for both know and unknown type, many time and also triggered Deployment of some desktop app, to the win 8.1 laptops. the desktops are showing in Intune All devices -> all computers nicely. But
not in SCCM2012.
what did I missed, I tried to add all the logical roles. below is some details what shows up in Intune:
indranil

If you installed the Intune agents on the Win 8.1 and Win 7 systems, then they will never show up in ConfigMgr.
There are basically two parts of Intune -- a Mobile Device Management piece and a Windows management piece. The Intune connector in ConfigMgr takes over the MDM piece and nothing more. When ConfigMgr takes over this MDM piece, as Torsten said, all MDM devices
enrolled show up in ConfigMgr and not Intune because that's now controlled by ConfigMgr. The Windows management piece remains unchanged and separate though and so those systems will be directly managed by Intune only or ConfigMgr only.
So you have three options there:
- Install the ConfigMgr agent and managed using COnfigMgr
- Install the Intune agent and manage using Intune
- Enroll the systems using OMA-DM which manages them as if they were devices. This means so you don't get SCEP or Windows Updates or most of the other ConfigMgr functionality. This is only valid for Win 8.1 though.
Jason | http://blog.configmgrftw.com

Boundaries configuration in SCCM 2012. Step-by-Step doc, link

Similar Messages

Maybe you are looking for