Step by Step Oracle installation All in One e-book

Hi all
I'd like to introduce a new ebook that I've prepared recently named "Step by Step Oracle installation All in One e-book" which contains installation steps of Oracle 10g,11g on Linux and Solaris with 188 screenshots!
It can be downloaded from the following link:
http://kamranagayev.com/2011/10/19/step-by-step-oracle-installation-all-in-one-e-book/

Helios- Gunes EROL wrote:
Hi Kamran;
congratulation ;)
Regard
HeliosThanks bro :)

Similar Messages

  • Error during Oracle installation in Oracle Enterprise Linux

    Hi All,
    I was trying to install Oracle 10g in Oracle Enterprise Linux, and I'm getting the following error when I give the command *./runInstall*.
    [oracle@localhost database]$ ./runInstaller -responseFile /home/oracle/database/response/enterprise1.rsp -nowelcome
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_12-58-11AM. Please wait ...[oracle@localhost database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
    127.0.0.1:0.0
    127.0.0.1:0.0
    OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
    OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh: % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    Use the following command to see what shell is being used:
    echo $SHELL
    Use the following command to view the current DISPLAY environment variable setting:
    echo $DISPLAY
    - Make sure that client users are authorized to connect to the X Server.
    OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock... see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for 'xclock': '/usr/X11R6/bin/xclock'
    I have tried to set the DISPLAY variable to my IP address, but it still gives the same issue.
    Please find the logs for the same:
    [oracle@localhost database]$ /sbin/ifconfig
    eth0 Link encap:Ethernet HWaddr 00:0C:29:95:3B:4F
    inet addr:192.168.64.128 Bcast:192.168.64.255 Mask:255.255.255.0
    inet6 addr: fe80::20c:29ff:fe95:3b4f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:532694 errors:0 dropped:0 overruns:0 frame:0
    TX packets:288167 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:792077163 (755.3 MiB) TX bytes:16147337 (15.3 MiB)
    Interrupt:193 Base address:0x2024
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:3280 errors:0 dropped:0 overruns:0 frame:0
    TX packets:3280 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1739143 (1.6 MiB) TX bytes:1739143 (1.6 MiB)
    [oracle@localhost database]$ export DISPLAY=192.168.64.128:0.0
    [oracle@localhost database]$ echo $DISPLAY
    192.168.64.128:0.0
    Please suggest on what can be done as this is the last step for the Oracle installation which I'm unable to complete.
    Let me know for any more details needed.
    Thanks
    Ravi
    Ph: +919583750774

    Hi,
    Thanks for the immediate response.
    Now I'm getting the following error:
    [oracle@scondw01 database]$ ./runInstaller -force -responseFile /u01/database/response/enterprise1.rsp -silent -nowelcome
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_09-10-03PM. Please wait ...[oracle@scondw01 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Unexpected Signal : 11 occurred at PC=0xB7C297CE
    Function=(null)
    Library=/tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    NOTE: We are unable to locate the function name symbol for the error
    just occurred. Please refer to release documentation for possible
    reason and solutions.
    Current Java thread:
    at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1206)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:900)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:408)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:400)
    at oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(OiicSilentInterfaceManager.java:679)
    at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
    at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
    at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
    at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
    Dynamic libraries:
    08048000-08056000 r-xp 00000000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
    08056000-08059000 rwxp 0000d000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
    a4d43000-a4d4a000 r-xp 00000000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
    a4d4a000-a4d4b000 rwxp 00006000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
    a4d4b000-a4d88000 r-xs 00000000 08:01 659257 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4-nls.jar
    a4d88000-a4f2f000 r-xs 00000000 08:01 659256 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4.jar
    a4f2f000-a4f67000 r-xs 00000000 08:01 659275 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraPrereq.jar
    a4f67000-a5085000 r-xs 00000000 08:01 659274 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/classes12.jar
    a5085000-a508d000 r-xs 00000000 08:01 659272 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/swingaccess.jar
    a508d000-a50da000 r-xs 00000000 08:01 659255 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-nls.jar
    a50da000-a50e0000 r-xs 00000000 08:01 659273 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-swingaccess.jar
    a50e0000-a5365000 r-xs 00000000 08:01 659254 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3.jar
    a5365000-a538c000 r-xs 00000000 08:01 659259 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4-nls.jar
    a538c000-a53f1000 r-xs 00000000 08:01 659258 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4.jar
    a53f1000-a54a6000 r-xs 00000000 08:01 659271 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oracle_ice.jar
    a54a6000-a54c3000 r-xs 00000000 08:01 659269 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_TW.jar
    a54c3000-a54e0000 r-xs 00000000 08:01 659268 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_CN.jar
    a54e0000-a54fe000 r-xs 00000000 08:01 659267 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_pt_BR.jar
    a54fe000-a551b000 r-xs 00000000 08:01 659266 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ko.jar
    a551b000-a5537000 r-xs 00000000 08:01 659265 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ja.jar
    a5537000-a5554000 r-xs 00000000 08:01 659264 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_it.jar
    a5554000-a5571000 r-xs 00000000 08:01 659263 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_fr.jar
    a5571000-a558e000 r-xs 00000000 08:01 659262 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_es.jar
    a558e000-a55ad000 r-xs 00000000 08:01 659261 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_de.jar
    a55ad000-a55c9000 r-xs 00000000 08:01 659260 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp.jar
    a55c9000-a55ea000 r-xs 00000000 08:01 659270 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstImages.jar
    a55ea000-a55f0000 r-xs 00000000 08:01 659345 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ojmisc.jar
    a55f0000-a56ce000 r-xs 00000000 08:01 659342 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/emCfg.jar
    a56ce000-a56e1000 r-xs 00000000 08:01 659344 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-mapping.jar
    a56e1000-a57e1000 r-xs 00000000 08:01 659343 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-collation.jar
    a57e1000-a5866000 r-xs 00000000 08:01 659341 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xml.jar
    a5866000-a5868000 r-xs 00000000 08:01 659349 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstallerNet.jar
    a5868000-a5876000 r-xs 00000000 08:01 659350 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/share.jar
    a5876000-a593d000 r-xs 00000000 08:01 659347 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/srvm.jar
    a593d000-a5a65000 r-xs 00000000 08:01 659346 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xmlparserv2.jar
    a5a65000-a5a72000 r-xs 00000000 08:01 659351 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oneclick.jar
    a5a72000-a5e0f000 r-xs 00000000 08:01 659348 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstaller.jar
    a5e0f000-a5e2b000 r-xs 00000000 08:01 642421 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/sunjce_provider.jar
    a5e2b000-a5ee6000 r-xs 00000000 08:01 642420 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/localedata.jar
    a5ee6000-a5ef3000 r-xs 00000000 08:01 642419 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/ldapsec.jar
    a5ef3000-a5ef6000 r-xs 00000000 08:01 642418 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/dnsns.jar
    a60fa000-a62fa000 r-xp 00000000 08:01 330503 /usr/lib/locale/locale-archive
    b5bfb000-b618a000 r-xs 00000000 08:01 511764 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/charsets.jar
    b618a000-b619b000 r-xs 00000000 08:01 511802 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jce.jar
    b619b000-b6274000 r-xs 00000000 08:01 511803 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jsse.jar
    b6274000-b628a000 r-xs 00000000 08:01 196225 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/sunrsasign.jar
    b62d4000-b79c2000 r-xs 00000000 08:01 511810 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/rt.jar
    b79c2000-b79d6000 r-xp 00000000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
    b79d6000-b79d9000 rwxp 00013000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
    b79d9000-b79f9000 r-xp 00000000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
    b79f9000-b79fb000 rwxp 0001f000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
    b79fb000-b7a0b000 r-xp 00000000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
    b7a0b000-b7a0d000 rwxp 0000f000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
    b7a0d000-b7a16000 r-xp 00000000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a16000-b7a17000 r-xp 00008000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a17000-b7a18000 rwxp 00009000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a1f000-b7a23000 rwxs 00000000 08:01 249425 /tmp/hsperfdata_oracle/5761
    b7a23000-b7a44000 r-xp 00000000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a44000-b7a45000 r-xp 00020000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a45000-b7a46000 rwxp 00021000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a46000-b7a58000 r-xp 00000000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a58000-b7a59000 r-xp 00011000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a59000-b7a5a000 rwxp 00012000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a5e000-b7a66000 r-xp 00000000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    b7a66000-b7a67000 rwxp 00007000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    b7a67000-b7e6d000 r-xp 00000000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    b7e6d000-b7e88000 rwxp 00405000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    b7e9c000-b7fc1000 r-xp 00000000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc1000-b7fc3000 r-xp 00124000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc3000-b7fc5000 rwxp 00126000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc7000-b7fc9000 r-xp 00000000 08:01 344656 /lib/libdl-2.3.4.so
    b7fc9000-b7fca000 r-xp 00001000 08:01 344656 /lib/libdl-2.3.4.so
    b7fca000-b7fcb000 rwxp 00002000 08:01 344656 /lib/libdl-2.3.4.so
    b7fcc000-b7fda000 r-xp 00000000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fda000-b7fdb000 r-xp 0000d000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fdb000-b7fdc000 rwxp 0000e000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fe9000-b7ffe000 r-xp 00000000 08:01 344641 /lib/ld-2.3.4.so
    b7ffe000-b7fff000 r-xp 00015000 08:01 344641 /lib/ld-2.3.4.so
    b7fff000-b8000000 rwxp 00016000 08:01 344641 /lib/ld-2.3.4.so
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 387K [0xa6550000, 0xa65f0000, 0xa70d0000)
    eden space 512K, 69% used [0xa6550000, 0xa65a8f48, 0xa65d0000)
    from space 64K, 50% used [0xa65d0000, 0xa65d8080, 0xa65e0000)
    to space 64K, 0% used [0xa65e0000, 0xa65e0000, 0xa65f0000)
    tenured generation total 1408K, used 1090K [0xa70d0000, 0xa7230000, 0xafb50000)
    the space 1408K, 77% used [0xa70d0000, 0xa71e0938, 0xa71e0a00, 0xa7230000)
    compacting perm gen total 4864K, used 4693K [0xafb50000, 0xb0010000, 0xb3b50000)
    the space 4864K, 96% used [0xafb50000, 0xaffe5698, 0xaffe5800, 0xb0010000)
    Local Time = Thu Apr 5 21:10:05 2012
    Elapsed Time = 0
    # HotSpot Virtual Machine Error : 11
    # Error ID : 4F530E43505002EF
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
    # An error report file has been saved as hs_err_pid5761.log.
    # Please refer to the file for further information.
    Please let me know what can be the solution.
    thanks
    Ravikanth

  • HP Photosmart C6280 All-in-One Printer CIT248813-HPU-REDBOX-v4.exe error

    Using-Microsoft Windows XP Professional SP3, Network connected
    In HP Digital imaging monitor: Went to Help>Check for updates  Update file CIT248813-HPU-REDBOX-v4.exe downloads, but after it looks like its installing, I then get the following error message :Critical Update to HP Product Assistant Failed. Where do I get the file and download it by itself, to then try and load it outside of HP Digital imaging monitor?
    When I do a search for the  .exe file, nothing comes up.
    Per HP help, I have tried:
    Check for updates:
    =================
    Please visit the weblink below and click on the hyperlink "Automatically check to see if you have the latest software and drivers ". If you do not find any updates for the All-in-one software, then perform the below steps to disable the product assistant in the startup files.
    http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&dlc=en&cc=us&product=3194498
    Step 1: Enable Passive FTP
    ====================
    1. Open Internet Explorer.
    2. From menu options, click Tools.
    3. Click Internet Options.
    3. Click Advanced tab.
    4. Under Browsing section, scroll down and put a check mark next to "Use Passive FTP"
    5. Click Apply, and then OK.
    Check the functionality. If the issue persists, please perform the steps below.
    Step 2: Disable antivirus and firewall
    ===========================
    Please follow the steps to disable the anti-virus and fire wall:
    Disable Anti-virus:
    =================
    1. Look at the very bottom right corner of the screen.
    2. You should see several icons.
    3. Place the mouse pointer on each icon to see if a strip of text pops
    up.
    4. If you see the strip of text, it will tell the name of the program
    that the icon represents.
    5. If you find the icon for the virus protection software, right-click
    on the icon.
    6. In the pop-up menu, choose the option to disable or close the
    program.
    Disable the fire wall
    1) Click start -> Click Control Panel -> Security ->
    2) Under Windows Fire wall option select On/Off Windows Fire wall
    3) Click off radio button to turn OFF the Windows Fire wall.
    Check the functionality. If the issue persists, please perform the steps below.
    Step 3:
    =====
    Please perform the steps below to update the All-in-One software manually.
    1. On the Windows taskbar, click Start , click All Programs , and then click HP .
    2. If HP Update is available in the list of programs, Click HP Update to open the HP Update dialog box, and run the HP Update utility to download updates.
    Check the functionality. If the issue persists, please perform the steps below.

    still having this issue. Can anyone offer any advice? Where is the actual file on my PC? Why won't this load?

  • Step by step installation of Oracle Portal, Forms, Reports and Discoverer

    Hi all
    i m using Oracle Enterprise Linux 5. can any one plz tell me step by step installation of Oracle Portal, Forms, Reports and Discoverer?
    i watched some tutorials but didnt find any thing. did i need any pre-installation for Oracle Portal, Forms, Reports and Discoverer on Linux?
    Regards
    Saqib

    Dear Saqib Alam ,
    Hope you are fine, and also you have completed the PORTAL installation successfully.
    Can you kindly share me the methods you have went..
    can you clearly explain us by this OTN, it will be a great Knowledge Sharing for Apps DBA like us.
    1) what are the softwares we have to download for the Portal 11g
    2) if possible Step by step installation method.
    Thanks in advance,
    Abdul Hameed

  • Step by Step Oracle i-Learning Installation on Linux

    Hi all;
    I prepare one documentation about Step by Step Oracle i-Learning Installation on Linux.
    Its avaliable at:
    http://heliosguneserol.wordpress.com/2010/05/25/step-by-step-oracle-i-learning-installation-on-linux/
    Hope it helps to forum users
    Regard
    Helios

    Helios,
    Thanks for sharing this with us!
    Thanks,
    Hussein

  • Success! All fixes together in one thread...step-by-step...

    Okay, after one and a half days of bad installs, error messages, and reading this board I've FINALLY gotten v5.0 to work on my XP system. How'd I do it? Well, I took ALL the fixes offered on this site and did them all at once. Here's what I did...step-by-step with instructions. By the way, I'm running a Dell Inspiron 2200 with Windows XP Home.
    1.) Make sure you have the file "mapi32.dll" version 1.0.2536 in your /windows/system32 folder.
    How do I check:
    Click on you Start Menu in the lower left
    Then click on "My Computer"
    Then click on the "Windows" folder
    Then click on the "system32" folder
    Scroll to the "m"'s and put your mouse pointer over the "mapi32.dll" file, the version should pop up.
    If you don't have this file there are some creative ways to get the file that people have posted on this support forum. Look into those ways.
    2.) Make sure ALL of the following are "started": TCP/IP NetBIOS Helper, Windows Management Instrument, and WMI Performance Adapter.
    How do I do this:
    Click on the Start Menu
    Move your mouse pointer to "My Computer", but don't click on it
    RIGHT-click on "My Computer" and then choose "manage" in that menu
    In the left hand panel double-click "Services and Applications", then double click "services" in the right panel.
    Find those three files in the windows and click on them and make sure it says "Started" and "Automatic" next to the names.
    3.) Download and install the stand alone Quicktime 7.0.2 player. You need this for iTunes to run. Here's the link:
    http://www.apple.com/quicktime/download/standalone.html
    Restart your computer.
    4.) Download Bonjour for Windows from this link:
    http://www.apple.com/support/downloads/bonjourforwindows_readme.html
    NOTE: Before you start the install do the following(VERY IMPORTANT) DISABLE ALL YOUR ANTIVIRUS AND SPYWARE SOFTWARE. If you're running Norton 2005 right click on the system tray icon and click "disable Norton internet security" and "disable antivirus auto protect" make sure you do it until at least the "next system startup". I was also running Avast Antivirus so I had to "stop on-access protection". Those were the ones on my system, your system may be different.
    Then run the Bonjour install and restart your computer.
    4.) Download the iTunes install program from here:
    http://www.apple.com/itunes/
    ONCE AGAIN (VERY IMPORTANT) DISABLE ALL YOUR ANTIVIRUS AND ANTISPYWARE AS YOU DID FOR THE PREVIOUS STEP!!!!
    Restart your computer when it's done.
    This should work. For me, all the songs and playlists updated except for like 4 songs which said they couldn't be found. But when it asked if I would like to find the file I clicked "yes" and it lead me directly to the folder that had the song in it and when I clicked on the file the song started to play. I now had v5.0
    I really hope this helps.

    Great instructions and iTunes installed with only one heart stopping moment when the XP error report window opened followed by the Microsoft Online Crash Analysis window that announced that I'd suffered a major hardware failure.
    I don't think so.
    What I did notice is that XP hung at the Welcome screen(I don't get the Welcome screen since this is a one person computer.)and then again after the desktop loaded but before the icons appeared (Something else it never does.).
    The cause was the installer for this version of iTunes which definitly has problems.
    iTunes is running fine now and everything updated correctly but I'm still ticked off about nearly being given heart failure.
    Oh yes, it's easier to get rid of iTunes and QuickTime registry entries if you have Regcleaner : http://www.worldstart.com/weekly-download/archives/reg-cleaner4.3.htm
    Quicktime especially leaves files scattered everywhere.

  • I have one apple ID for multiple devices in my family.  I'd like to keep it that way for itunes/app purchases.  I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

    I have one apple ID for multiple devices in my family.  I'd like to keep it that way for itunes/app purchases.  I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
    I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet.  My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses.  I have read that if each person gets their own iCloud account, this would work.  However, I need to know what to do after I set everyone up with their own iCloud account.  Do I make that the default email address to be contacted or can they still use their hotmail email addresses.  Any help- with easy explanation- would be much appreciated!!

    We do this in my family now.  We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores).  Each iDevice has this configured.
    Then, each of us has our own iCloud account that is configured under Settings/iCloud.  That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup.  That Backup piece is pretty sweet and comes in handly if you replace your iDevice.  You can just restore from it.
    So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
    In answer to what iCloud does for you: http://www.apple.com/icloud/features/
    Think of it as an internet based ("cloud") area for all of those items listed in my response.  What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures.  Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures.  1000 may not stretch as far as it sounds.
    Message was edited by: Michael Pardee

  • HP 3540 e-all-in-one series. Missed a step during setup. Please help!

    Hi,
    I've just set up my HP 3540 e-all-in-one series, however I think I've missed a crucial step and I'm worried I've messed everything up. I printed the alignment page and on it, it says to scan the alignment page for best print quality. I somehow bypassed this step and I'm at a loss as to what to do now. Will it affect the printer or quality in any way?
    Please help!!

    Hello there! Welcome to the forums @panda411 
    If there are any "alignment" issues you're noticing when you use your Deskjet Ink Advantage 3540, you can run the alignment manually to see if that corrects the issue.
    If there is no issue, I wouldn't suggest doing anything differently. What comes to mind is the saying "if it's not broken, don't fix it"!
    If you feel you need to align the printer, try this:
    source
    If there is anything else I can help with, just let me know!
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Sharing library/playlists etc. All users on one computer STEP BY STEP guide

    ok i recently installed a new hard drive and when I set up iTunes I found I needed to set up iTunes the way i used to have it... which was that all users shared the same library... and if one user added a song we all had it... without manually modifying anything... also playlists created by one would appear for others.
    A scan of the forum caused me headaches and little help.
    SO... a couple of hours palyng around and I am where i want to be!!!!
    please note... save time and modify permissions at the correct stage... or it won't work!!!
    Step By Step...
    Go To...
    Main users iTunes folder (iTunes Library, Album Artwork, iTunes Music Library.xml, iTunes Music)
    AND... do a get info...
    Under... Ownership & Permissions...
    Change the group to admin and give this group 'read & write' and others the same or leave it at read only.
    Hit the 'apply to enclosed items' button!!!
    THEN... drag this folder to a shared location... IE Users / Shared.
    THEN... make an alias and drag it back to the Music Folder in your own home library. (where the original folder was previously)!
    DELETE the word ALIAS.
    Log in as another user and get rid of the iTunes folder. (if the other user has different songs etc... then save them to a separate location for re-importing later!
    Go to the Shared location... Make another Alias... drag it to the music folder and again DELETE the word ALIAS.
    Do this for all users...
    Any user who adds a song to iTunes... is shared by all.
    Any user who creates a playlist... is shared by all.
    One downside to this... if a user is logged in using iTunes and you switch users iTunes will not be available to the new user... unless the application is quitted...
    G4 iMac 20 1.25ghz / G4 iBook 14 1.33ghz   Mac OS X (10.4.9)  

    That steps above are far too much (and unecessary) work.
    Drag the iTunes folder to a shared location.
    Make sure all users have REad/Write permission to the iTunes fodler.
    Each user start iTunes holding the Option key, select Choose existing library and pick the iTunes folder in the Shared folder.

  • Oracle RAC 11g On Window Server 2003 Installation Step by Step

    Hi all
    I tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003
    I have tow nodes
    EMC storage
    Any body can help please ...
    Thanks in Advance.
    Edited by: MHAIDAR on Jun 15, 2011 1:19 AM

    I tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003check this
    http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnWindows2003UsingVMware.php

  • CTC DI all-in-one fails at Step: Upload Default ACL Settings

    Hi,
    i need your help.
    I tried to install a NWDI on a SolMan (Rel. NW7.01 SP06).
    I deployed the necessary SCAs (DI_CBS, DI_CMS and DI_DTR =7.01SP6).
    At the next point I'd like to use the wizard for the initial setup (DI all-in-one) and here are my problem.
    At the step "Upload Default ACL Settings" it aborts with the error: Not a valid URL: Unexpected character found [':' at position 7]
    Here an an excerpt from the log:
    ================================================================================
    Exception Class: java.net.MalformedURLException
    Exception Message: Not a valid URL: Unexpected character found [':' at position 7]
    Stack Trace
    java.net.MalformedURLException: Not a valid URL: Unexpected character found [':' at position 7]
         at com.sap.ctc.util.infra.BaseConfig.dispatchException(BaseConfig.java:243)
         at com.sap.ctc.util.di.services.DTRServices.checkinFiles(DTRServices.java:373)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    Caused by: java.net.MalformedURLException: Not a valid URL: Unexpected character found [':' at position 7]
         at com.sap.dtr.client.lib.protocol.impl.URLScanner.next_token(URLScanner.java:587)
         at com.sap.dtr.client.lib.protocol.URL.parse(URL.java:521)
         at com.sap.dtr.client.lib.protocol.URL.(URL.java:63)
    ================================================================================
    I checked the default Users. The NWDI_ADM, NWDI_DEV and NWDI_CMS (The NWDI_CMS was manuel created) exists and have the expective roles/groups and actions (e.g. NWDI_ADM = Group NWDI.Administrator = Role NWDI.Administrator + Action LcrInstanceWriterAll)
    I checked the log/protocol and the strange argument there is dtrUrl : http://:/dtr.
    I think the wizard is missing the right hostname an port for the as java. I tried to execute the Wizard with FQDN, simple hostname, localhost and edited also the host-file (like in other threads proposed).
    The check of the SLD-Connection in the SLD-DataSupplier in the VA are OK (the http-settings and CIMClient Test works fine).
    I spent a lot of time at the VA and configtool to finde the possible key with the missing value for the host an port, However with no success.
    So now im here and hope some of you can give me an advice.
    Best regards
    Denis
    Edited by: Denis Stricker on Jan 6, 2012 1:48 PM

    Hello Denis
    I have checked the attached error together with our expert for the DI
    configuration wizard and found that the problem is most liked caused
    by some variables that are not properly set by the underlying
    framework (CTC framework) due to problems with the data bindings.
    To investigate the problem in more details it is important for us to
    know how the engine was being setup. Can you please let us know if you
    directly installed the engine or if you upgraded an existing
    engine? In case of an upgrade can you please tell us
    which SP had the engine before the upgrade?
    So if you upgraded from an earlier SP this might explain
    your problem and we would directly know in which area to look.
    Unfortunately we cannot offer automatic configuration
    after an upgrade case (see our central CTC note: 923359) exactly for
    such reasons (besides of that CTC don't know the state after the
    upgrade). Configstore does not offer to add new parameters only to
    modify.
    As workaound you can try to run DI template and everytime where it
    stops, do the step manually and skip the not working step.
    Thanks
    Kenny

  • ABAP system user name asking while executing step DI all-in-one

    HI,
    We are trying configure NWDI in our EP system,for that we have deployed DI_CMS,DI_DTR,DI_CBS through JSPM.But when we executing step DI all-in-one in configuration wizard,its asking Administrator(DDIC) user of ABAP system.
    But our EP system UME is local database.
    please provide the solution for solving the issue.
    Regards
    Sasikanth Reddy

    Hi Sasikanth,
    Please make sure that you are using the user which is having administrator acess with NWDI roles.
    Refer to http://help.sap.com/saphelp_nw70/helpdata/en/44/60dc1943c2311ce10000000a155369/frameset.htm
    Hope it will helps
    Regards
    Arun Jaiswal

  • Oracle 10g client installation process step by step

    Hello all,
    1)I have oracle 10g client installed in my system and the required drivers from the oracle site in xi .
    2)Also I tried coping the client sw from other system in which the oracle client was working fine.when I run connect.cmd i am getting an error"ora12154:tns:could not connect identifier specified.
    Kindly let me know the step by step process of the same in brief.
    please send the same to [email protected]
    thanks,
    Srinivas

    pls go through the link
    http://www.cryer.co.uk/brian/oracle/ORA12154.htm
    http://www.is.mcgill.ca/minerva/Help/ora12154.htm
    http://www.techonthenet.com/oracle/errors/ora12154.php
    http://www.ironspeed.com/Designer/4.0.3/WebHelp/Part_VI/ORA_12154_TNS_could_not_resolve_service_name.htm
    with regards
    Gabriel

  • Need step by step installation of oracle database 10g on mac os x (10.5)

    Does anybody know step by step installation of Database 10g on mac os x?
    Thanks

    First you download Oracle 10.1.0.3: The only supported database version.
    Then you beg Apple to send you a copy of Panther 10.3.6: The only supported operating system version.
    Then, if you are familiar with FreeBSD and/or Mac OSX, you should have it up and running in a day or so.
    If you are thinking you can do this with 10gR2 or above on Tiger or Leopard you might want to consider that dropping a brick on your foot is faster and will generally produce the same sensation.

  • Can any one provide steps to install oracle 10g on RHEL5

    can any one provide steps to install oracle 10g on RHEL5...:)

    go through http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
    & http://www.emrealadag.com/dosyalar/it/Ora10gonRhel5.pdf
    Edited by: CKPT on Nov 23, 2010 7:15 PM

Maybe you are looking for