Step by step to load datSource 2lis_03_UM
Friends, I need a step by step to load data from the dataSource 2LIS_03_UM.
I need the fields that reflect the report MIGO / MIRO R3
I'm using 7.0 aversion
Thank you
Hi,
You just want use 2lis_03_UM only?
This is lo data source. so you need delete and fill the setup tables.
Delete setup tables -T code - LBWG use application as 03.
Filling by using t code - OLIZBW .
later you can do test run at RSA3.
once you see the data there then replicate your data source into bw.
create info cube and transformations,info pack and dtp.
Thanks
Similar Messages
-
Step by step Data loading to BI 7.0 from SAP R/3 not from flat files
Dear Guru's
As i am new to BI 7.0, i need to extract the data from R/3 to BI. so could anyone help me in this regrds
Thanks
C.S.Rameshif ur still not clear
go thr this
Hi,
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Pls chk this cookbook for step by step;
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%201.pdf
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%202.pdf
Step by step Generic extraction:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
How To doc link
https://www.sdn.sap.com/irj/sdn/howtoguides
Hope this helps -
Sent step by step apdu command to load cap file into javacard
Dear All,
I have log file about process loading cap file into card:
Loading "E:\Sample.cap" ...
T - 80F28000024F00
C - 08A000000003000000019E9000
ISD AID : A000000003000000
T - 80E602001407A000000132000108A00000000300000000000000
C - 009000
T - 80E80000C8C48209B6010011DECAFFED010202010107A000000132000102001F0011001F00000015009A005D0772000A00C8001B03E400020000000002000004001502000107A0000000620001000107A000000062010106005D80810000C20000810200800000FF000100000000810500FF0003000000028000130008010D000002CA02DE02E202E702EE02F602FB0308032B036204AA04C804E8000009040308020705060C0D00010D040308020705060C0D090A0B010707720003201D046D06048D00141C7500120001000300
C - 009000
T - 80E80001C800098F00163D1D8C001A77068D001401770110188C001B7A0220181D8C001C7A03101C026B07017F001D7A7B001D670D8F001F3D1C8C00207F001D7B001D1C8B00127B001D93038903290803290903290A03290B03290D03290E707F1506160E251100FF53290C160C606D1B1604160E41251100FF53290D160D605C191E160E41251100FF531505160E251100FF53435B290F160F6308160F0245290F160F10096D075909017005590801160F10146D27160D160C432910161063081610024529101610100C6D0700
C - 009000
T - 80E80002C8590B01700B161010106F05590A01590E01160E1607A4FF7F1100961609411608430547290F160F630703290F700E160F1100FF6F071100FF290FAD0005160F5B38104B160B41160A43290F160F630703290F700E160F1100FF6F071100FF290FAD0007160F5B387A045603290503290603290704290803290916066008160610096F0F1B1607590701251100FF53290616056008160510096F0E191E590201251100FF532905160610096F2E160510096F281605160643290A160A6308160A0245290A160A10086D00
C - 009000
T - 80E80003C80C16091008160A434129095908017042160610096F0E590801160565355905FF7030160510096F0E590801160665235906FF701E160616056F0E16061605432906032905700C1605160643290503290616071604A4FF5D1609106445290916096307117FFF29091609160847290916091100FF6F071100FF2909AD000316095B387A0430191E0441251100FF5375002D00020081000D0082001B18068901191E0541251100FF537818078901191E054125191E0641258D001778191E0441251100FF53107F6E101800
C - 009000
T - 80E80004C8058901191E0441251100FF537803780320188C001B18110100900B870218110118900B870318110118900B870418110080900B87051808900C8706181D880718AE0788081804048D00138709181006048D00158700181006048D0015870A7A02201D046D06048D0014181D880718AE0788087A011006780110AE0B780210AD090325780310AD090303387A0110AE08780330191E1103008D00183B057805501D1604411100806F040378AE0B6106078D0014AD051D1A1F16048D00193B1604780540AD090303381800
C - 009000
T - 80E80005C803880B1803890C1803890D1803890E1803880F1F60081FAD05926F06058D0014191EAD05031F8D00193B1804880F7A0543032905AE0B046B06088D001419031E41257501300002FFC600110000000D058D00141819031E418C001E290618AF011E41890119AF0125066A06058D00141806881008AF01412904A800E2181916048C001E2905191604257300C800010004000F0031008600A71605AD02926F06058D0014191604AF0141AD020316058D00193B181605890CA8009AAD0603191604AF0141251100FF5300
C - 009000
T - 80E80006C839AD0604191604AF01410441251100FF5339AD0605191604AF01410541251100FF5339AD0606191604AF01410641251100FF5339AD0607191604AF01410741251100FF533970441605AD03926F06058D0014191604AF0141AD030316058D00193B181605890D70231605AD04926F06058D0014191604AF0141AD040316058D00193B181605890E700216041605AF014141290416041606A7FF1DAF0CAF0D41AF0E41610C058D00147006058D00147A0210AE0B046A0BAE0F6007AE10066A06088D00141804880B1800
C - 009000
T - 80E80007C8AE0788087A0440AD09030338AE0B6106078D0014180488111F650A18191E1F8B00217802780846032905032906032907032908AE116106088D0014AE0861040378AE107501DF00010003000918191E8C001E29091FAF011609416C6B04AF01412904705D181916041E418C001E29051916041E41257300400000000400110013004000220031702F1605652B1E160441AF0141290870201605651C1E160441AF0141290670111605650D1E160441AF01412907700216041605AF0141412904160416096FA1AD060700
C - 009000
T - 80E80008C8261100FF53290916091609452909AD0A0316098D00183B16069800B916079800B418191606191607AD03AD04AF0E8C0022AD0007251100FF53AD0606264510084F29091609AD0607266C14AD0903043818AE078808180388111140007816091609452909AD000716098D00183BAD0005251100FF53AD0605264510084F29091609AD0607266C14AD0903043818AE078808180388111140007816091609452909AD000516098D00183BAD0005AD0007AD0A058D0023AD0A05AD0A038D00246214AD0903043818AE0700
C - 009000
T - 80E80009C8880818038811114000781608604918191608AD02AF0C8C0025AD0003251100FF53AD0604264510084F29091609AD0607266C14AD0903043818AE078808180388111140007816091609452909AD000316098D00183BAD0003AD0A05AD0A078D0023AD0A07AD0A038D00246214AD0903043818AE0788081803881111400078AD09030338AE086511183D840804435B88087006058D0014037803430329047031181D160441251100FF5329051A1F160441251100FF532906160516066F040478160516066D0402781600
C - 009000
T - 80E8000AC80404415B29041604056CCE03780462032906042907703D181D160741251100FF531A1F160741251100FF534116064129061504160516074116065B3816061100FF6F070429067005032906160704435B2907160763C37A08000A000200010000000000000A001B0500000000000100000004000000130002002B003300090001000105009A002602001D0602001D0B02001D0002001D0102001D0202001D0302001D0402001D0D02001D0E02001D0502001D0702001D0F02001D0802001D0902001D0A02001D110200
C - 009000
T - 80E8000BC8001D0C02001D10038105020681080C060000330681080D01001D000681100506811006068110020600027A06800000068105000500000006000225010013000600002B03001D0D0600005906000728060006EB060001430900C8008BFF1726E2220E1F1A080808060403020809090F0302090507081D08100704040404060B0A082A04030C03260C030C050609060B060B060B060F0C030C060C030C080D02031205040B030205050A1D08061408330F0F0B0C111A020205080C060602040D09080C060602040D0900
C - 009000
T - 80E8800C5A03030603080602040E0205080C060602040D090303060308060204060506050039090D050508080B04050503030403FFFF06243509090D31180A2C091416081414200E690E130E270615190E19171B711B3B3C0D09233B0D092C00
C - 009000
Completed !
However, I want to run step by step a command to load this cap file into card.
When I sent "80F28000024F00", it is ok. It response: 08A000000003000000019E9000
After that, I sent next command: 80E602001407A000000132000108A00000000300000000000000, it response as 6985.
I don't understand why. Please help me this problem. I must do how to load this cap
Thanks & Best Regards
Kelvin NguyenHi,
You need to delete the old CAP file before loading it again. The problem is that when you call INSTALL FOR LOAD it sees there is already a CAP file with that AID present.
You can try sending a GET STATUS command listing load files to see what is on the card already. You need to delete what is present to be able to load/install again.
Shane -
Step- by- Step on How to Load Excel data into Crystal Reports?
Hi Friends,
Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
VijayIt's also important to 'prep' the excel file prior to connecting to it.
Give the data tab a meaningful name
Make sure the column headers are unique and that every column has a header
Delete any blank tabs
If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text. You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
Schema.ini example:
200912PUSD.csv
ColNameHeader=True
Format=CSVDelimited
MaxScanRows=25
CharacterSet=OEM
Col1=SSN Char Width 9
Col2=LAST_NM Char Width 25
Col3=FIRST_NM Char Width 25
Col4=DOB Date
Col5=STDNT_ID Char Width 10
Col6=SORTKEY Char Width 10
Col7=SCHOOL_NM Char Width 30
Col8=OTHER_ID Integer
Col9=GRADE Char Width 2
The filename in the first line needs to have the [] brackets around it, but I couldn't get it to display in this forum correctly.
Edited by: Eric Petersen on Jan 27, 2010 9:40 AM -
Step by Step details on how to load data from a flat file
hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx
hi sonam.
it is very easy to load data from flat file. whn compared with other extrations methods...
here r the step to load transation data from a flat file.......
step:1 create a Flat File.
step:2 log on to sap bw (t.code : rsa1 or rsa13).
and observe the flat file source system icon. i.e pc icon.
step:3 create required info objects.
3.1: create infoarea
(infoObjects Under Modeling > infoObjects (root node)-> context menu -
> create infoarea).
3.2: create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
3.3: create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create applic...component)
4.2: create infoSource for transation data(select appl..comp--.context menu-->create infosource)
>select O flexible update and give info source name..
>continue..
4.4: *IMp* ASSIGN DATASOURCE..
(EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
>* DATASOURCE *
>O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
>CONTINUE.
4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE FOR IN FOSOURCE..
> SELECT TRANSFER STRUCTURE TAB.
>FILL THE INFOOBJECT FILLED WITH THE NECESSARY INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
4.6: ASSIGN TRANSFER RULES.
---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
(IF DATA TARGET IS ODS -
INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
--->ACTIVATE...
STEP:5 CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
5.1: CREATE INFO CUBE.
-->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
5.2: CREATE INFOCUBE STRUCTURE.
---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
>MAINTAIN ATLEAST ON TIME CHAR.......(EX; 0CALDAY).
5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
>ACTIVATE..
STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
>SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
> DATASOURCE
> O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
>ACTIVATE.....UR UPDATE RULES....
>>>>SEE THE DATA FLOW <<<<<<<<----
STEP:7 SCHEDULE / LOAD DATA..
7.1 CREATE INFOPACKAGE.
--->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
>GIVE INFOPACKAGE DISCREPTION............_________
>SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
>SELECT EXTERNAL DATA TAB...
> SELECT *CLIENT WORKSTATION oR APPLI SERVER >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
>SELECT PROCESSING TAB
> PSA AND THEN INTO DATATARGETS....
>DATATARGET TAB.
>O SELECT DATA TARGETS
[ ] UPDATE DATATARGET CHECK BOX.....
--->UPDATE TAB.
O FULL UPDATE...
>SCHEDULE TAB..
>SELECT O START DATA LOAD IMMEDIATELY...
AND SELECT "START" BUTTON........
>>>>>>>>>>
STEP:8 MONITOR DATA
> CHECK DATA IN PSA
CHECK DATA IN DATA TARGETS.....
>>>>>>>>>>> <<<<<<<<<----
I HOPE THIS LL HELP YOU..... -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
Steps for master data loading by using process chain
Hi
I want to load the Master data by using the process chain . Can anyone tell me the step-by-step method for loading the master data .
I means what are the processes should i need to include in the process chain . Pls tell me in sequenece .
i ll assing the points
kumarHi,
The process os loading master data is similar to transaction data in terms of using the infopackages.
First you have to load Attr followed by texts and hierarchy.For master data you have to include the process type called as Attribute change run.This can be included as a separate process type or using the AND process.
Hope this helps.
Assign points if useful.
Regards,
Venkat -
Hi,
I have a very large Excel workbook which I need to load into SSIS. Using the default Excel connection manager SSIS seems to load the entire work sheet into memory before performing any operation even after setting IMEX=1 within the connection string.
Can anyone provide me with step by step instructions on how to use OLE Data Source Microsoft.ACE please?
I've found the link; -
https://www.connectionstrings.com/ace-oledb-12-0/
Which looks very useful.
Since I currently have Excel 2010 as my data source I tried; -
Data Source=C:\PoC\POC_Data_Source\my.xlsx;Provider=Microsoft.ACE.OLEDB.12.0;Extended Properties="Excel 12.0 Xml;HDR=YES ;IMEX=1";
The connection test successfully. However SSIS still seems to be loading the entire work sheet into memory before starting the data load.
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/Thanks again Koen,
I am developing remotely on a development server. So when I run SSDT I am running it within the development server box. My current technology / environment mix means I can't run SSDT from my local desktop.
I am pretty sure that scanning of the rows is an issue causing performance, e.g. if I just click on the data source component SSDT freezes for several minutes, unless I just have a cut down version of the Excel file, say first 5,000 rows, then the response
of SSDT is acceptable.
Also when I have SSDT pointing to the full spreadsheet and I click around in the associated Data Flow I notice devenv.exe* 32 slowing grabbing 4gb of RAM and releasing it according to Windows Task Manager.
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/ -
Hey,
receive mail through local provider but can't obtain conacts, folders etc.
I was told to use exchange for the mail provider, but I'm lost.
Really challenged,
As title says need step by step instructions, real basic, techno-challenged - have mercy!!
IanStep by step, how did you arrive at seeing this agreement?
-
Windows 7 x64 on 2009 MB, step-by-step instructions and solutions
ok, after spending days on this with about 10+ clean installs on 2 different machines and searching forums about various problems, i'm going to go step by step in a flow-chart like manner to describe the steps and various pitfalls in getting windows 7 ultimate 64 bit installed correctly on a macbook (late 2009)...most of this i didn't figure out on my own, this is a compilation of solutions found by others. i'll try and link or credit anyone i can, but honestly can't remember where i saw all of this. part of this is to share my days of frustration to try and save someone some time. also, in case i have to do this again, i want a record of it so i don't have to start from scratch next time.
i don't have everything working perfectly, but i have wireless and sound, but not sure if all the drivers are up to date. i'm still working on the headphone issue, i don't have sound yet with headphones, but i got the speakers to work.
i'm going to preface this by saying that windows 7 is a horrible piece of software, i'm only helping a friend do it because she's an architect and needs autocad, but she wants a mac for daily use. also, i'm doing this from a spanish install of windows 7 (here in south america), so it's a pain to translate this cruddy convoluted OS into english as i'm not familiar with windows 7 anyway, so i'll do my best. i'm not a pc expert. also going to say that the windows 7 x86 and x64 installs i've done on a couple macbook pro 15's seems to work much better (full trackpad functionality, expose works) and without as many problems...i don't know why it doesn't seem to work as well in x64 on the macbook, i'm still investigating.
also, i want to say that a fresh (first-time) bootcamp partition with windows install after a clean mac os x install seems to produce the best results. i say this because i wasn't happy with all the hacks in my first couple attemtps, so i erased the bootcamp partitions and re-created them to re-install windows 7 again. but i started experiencing some peculiarities that never happened in the first install after a clean Mac OS X install. it's as if the computer leaves artifacts from previous installs and acts funny. also, reboots and start-up times seem to be slower now than when it was a first-time fresh install. anyway, i'll try and outline all the weirdness here, indicated by asterisks *
SO, HERE GOES:
1) Go to Bootcamp Utility > Create Bootcamp partition
2) Afterwards, this should take you to a restart into the windows install dvd....if install dvd boots fine, skip to step 3
** if you get a gray screen (happened to me after subsequent re-install attempts), you have to power off and reboot holding down "C" key to boot from the dvd...or you can hold down alt/opt key to get the icons of bootable volumes, at this point it should be mac os x and the windows dvd. the point is, force it to boot from the dvd if it hangs on re-start.
3) Windows install should start. Select language, etc....You should then get to a screen listing all the partitions (should be 3 of them). Choose the Bootcamp partition and format (erase) it to proceed with the install.
4) Windows should start installing all the files and will reboot a couple times, here's where things get weird possibly. On the first attempt at installing Windows 7, the install went smoothly on restart.
** some of you might get a blinking cursor and a black screen that goes on forever. Supposedly this is a bug in Windows 7, having to do with video drivers or something. I don't understand because my first install attempt, it rebooted just fine and the installation continued.
anyway, what you have to do here if you get the forever-black screen is power down the machine with the power button and restart holding the alt/option key. this time when you get the bootable volumes on the gray screen, choose the Windows partition, which will now appear. DON'T boot up from the DVD. upon restart into Windows, you should be back in the installation process and it will attempt to finish the install here.
it might be my imagination, but once i had to reboot into the dvd here to actually finish the install. technically Windows is not finished installing at this step, you just have to figure out how to get past the black screen to finish the install. try both.
5) Windows should go back to where it left off before the restart, then finish the install.....and restart AGAIN. On my first attempt, the restart went smoothly and started the "first time user" process...
** some of you will get the black screen YET AGAIN, this happened to me on my subsequent attempts at re-installing Windows. again, you need to power off and start up holding the alt/option key, choose the Windows partition and it should take you to the "first time user configuration" process....since at this point, windows is indeed installed.
6) Here you will fill out all your information, product key, etc...and get into Windows. Here you will have some other problems.
Problem #1: you have no drivers to run Windows on your Mac, so you will need to install Bootcamp in windows from your Mac OS X install dvd
Problem #2: you have no "right click", because you don't have drivers, so you might not be able to eject the Windows dvd to put in the Mac dvd
Solutions: you can't control-click or right click, BUT YOU CAN hover over the DVD drive ( "D:" in your computer, my PC or whatever it's called in english) and see if there's an "eject disc" option.
for some reason, my Windows dvd was spinning and not being recognized, so i just rebooted (alt/option) into Mac OS X and ejected the disc there. the point is, you need to eject the Windows disc and put in the Mac OS X install disc to access Bootcamp for Windows.
7) Reboot into Windows (if you had to boot into Mac to eject the disc). Insert Mac OS X install disc. Navigate to BootCamp setup.exe and run it.
** the first time i did this, it ran no problem. but in subsequent attempts, it gave me the "x64 not supported by this computer" message that everyone seems to encounter. there is a bypass for this outlined here:
http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
8) Ok, so now you should have Bootcamp 3.0 installed. Now you need to update it with Bootcamp 3.1 update. Download it here and run it. This is required for 64 bit support, I believe this is the link:
http://support.apple.com/kb/dl979
** hopefully you don't have problems, i didn't, so you might have to search the forums since i can't anticipate what might happen here, it worked for me every time.
9) Ok, i think it might reboot after the update install. Now you have Bootcamp installed and most of the drivers you need, however not everything works. Some of the drivers will be out of date.
Problem #1: you may or may not have updated nvidia drivers. mine are ok, but check nvidia website if you have doubts. most of their drivers are for PC hardware, however, so the ones on the bootcamp disk and update should be fine.
Problem #2: almost everyone has wi-fi connectivity problems. it has to do with the wrong/outdated broadcom drivers from bootcamp. i will outline how i got it to work (based on someone else's solution i found in some forum or other).
Problem #3: almost everyone is having sound issues. i'll explain what i did. i still have no sound coming out of the headphone jack, i'm working on that next. but i have speaker sound and no red light coming out of the headphone jack.
** first of all, you should probably download firefox from internet explorer in windows, then update adobe flash, it's a pain....i used another computer to download the drivers, then transfered them by USB drive, but you can do it however u want.
Solution to wi-fi: ok, not sure where i got this information, but i downloaded HP drivers in a file called "sp45524.exe"....here's the link:
http://www.wireless-driver.com/download/hp/hp-broadcom-wireless-lan-windows7-dri ver-v560188.htm
apparently the broadcom drivers in Bootcamp 3.0 and 3.1 update won't install on Windows 7 x64 for some reason, lot of people are getting "code 10".
what i did is this:
9a) run the .exe file, it will create a folder called SWSetup\SP45524 that will house the drivers. there's a setup file in that folder, i didn't try it. perhaps it will install from there, but everything i read suggested a different step. ** if you run the set up file, you may have to run as administrator, or use the "troubleshoot compatibility" trick to get it to work.
9b) Go to Control Panel > Hardware and Sound > Device Manager > Network adapters
you should uninstall or deactivate any drivers you have. if it's not showing any wi-fi adapter, right click and "check for new hardware" (not sure how it's translated into english from spanish)....you should have an unknown device pop up with the yellow icon and exclamation mark. double click on that, assign it as a network adapter.
when you get to the driver tabs, you can install it from there. this is where it gets tricky. click "install driver", "check drivers on this computer", "choose from a list of drivers on this computer", "use disc", and in the dialogue box ("install from disc" that says "copy manufacturers files from", navigate to the C: SWSetup|SP45524 folder and click until you can accept. this will load up a different list of drivers.
(sorry, i'm translating the Windows from spanish to english, and i'm not familiar with exactly what they say in english, so you'll just have to use your imagination)
you should now have a small list of drivers. personally, i chose the first one on the list "Wi-Fi adapter Broadcom 43224AG 802.11a/b/g/draft-n", but the second one worked also. again, i'm doing this on a late 2009 white macbook (6.1) and it works. according to the date of the driver, it seems like it might not even be the most current and might be older than the one that's on the MAC OS X install disc, but none of the ones on the disc work. this one does. (thanks to whoever found this out, i can't find the original link of the post with this driver reference).
Solutions to sound: ok, there are multiple posts on this, everything from updating realtek to sigmatel...personally what worked for me was to download the most current Cirrus Logic drivers.
everyone has been pointing to this post:
http://www.stuffedcow.net/macbook_audio
it doesn't really tell you what to do exactly. i'm not even sure what to do, but here's what i did. actually, i downloaded what was supposed to be the CS4207 driver here:
http://www.cirrus.com/en/products/pro/detail/P1233.html
then i followed the same procedure as before with the network adapter driver...."install driver", "check drivers on this computer", "choose from a list of drivers on this computer", "use disc", and in the dialogue box ("install from disc" that says "copy manufacturers files from", navigate to the folder you just downloaded from the above link.
you should have an updated list of drivers. what i don't understand is that the Cirrus site lists the most current driver as CS4207, but the only thing that has 4207 in it starts with CDB. in any case, i chose the last one on the list, CS4206A (AB 99).
i have no idea why i chose that, it just seemed to be the most current. in any case, sound works now.
Ok, i tested all this stuff in skype. wifi, microphone and speakers work, isight works. however, still no headphone sound. so if anyone knows how to fix that, please let me know. i haven't gotten to that part yet. but i've spent like over a week trying to figure this out. windows 7 is so horrible that there seems to be so many steps to getting it just right, and i just found myself starting all over (i didn't mention the nightmare with license breaks with AutoCad due to windows reading the clock differently...that's another hack that i had to deal with...and failure meant re-installing everything).
ok, off to bed now....Windows 7 x64 all updates
Just doublechecking. Does that include the recent chkdsk hotfixes?
[The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778] -
Step by Step guide for upload iPad only apps
Please note that this is not derived from me alone.
This Knowledge is derived from three forum members, DutyFarm, ChoosingNameCanBeSoXXX & Dei_Machiavelli.
I just add the solution for generate the .xcent file.
[Atleast enough for me to make it work.]
Welcome that if anyone find that this step by step guide not detail enough, you can copy and add more points and post again.
Step 1:
Make sure that all the Icons for the iPad are accounted for because if you don't, Application Loader will Scream
[For some strange reason, you have to add the Old iPhone Icon Size as well]:
Old iPhone: 57 by 57 [Icon]
Start Up Icon for iPad: 72 by 72 [Icon-iPad.png].
SpotLight Search for iPad Must Have: 48 by 48 [Icon-iPad-spot.png]
Step 2:
Load the Mac, unzip your *.ipa file, place the *.app file on your desktop and modify its internal Info.plist file.
Change 3.0 to 3.2 here:
<key>MinimumOSVersion</key>
<string>3.2</string>
Step 3:
Because after you change the Info.plist file by your own way, the file will changed to wrong codesign.
So that will need this step to change it back to right codesign which can success upload to apple store.
Create this weird NameOfYourApp.xcent file on your desktop:
That strange 10 digit is the App ID:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>application-identifier</key>
<string>APP_ID_Letters_&_NUMBER_HERE.com.whatever.YourAppName</string >
<key>get-task-allow</key>
<true/>
</dict>
</plist>
Step 4:
Now Type this in Terminal:
/usr/bin/codesign -f -s "iPhone Distribution: Yours Distribution Cert Name" "--resource-rules=/Users/ABC/Desktop/YourAppName.app/ResourceRules.pl ist" --entitlements "/Users/ABC/Desktop/YourAppName.xcent" "/Users/ABC/Desktop/YourAppName.app"
iPhone Distribution: Yours Distribution Cert Name << This you can check back at your Cert in Keychain.
/Users/ABC/Desktop/ : here is assume that your username in you Mac OS is ABC. But more easily, you can put all the file at any path you want.
I just put all files at the iPad folder at system disk root. so that the path just /iPad/ .
OK, if no error come out, congrats that you are done. You can upload the app by Application Loader. (Assume that you know what is it, and need to zip you .ipa before upload)
BUT, LIKE ME and some member here, we see two error after the Step 4 command as below:
/Users/kevs/Desktop/MyApp.xcent: unrecognized blob type (accepting blindly)
/Users/kevs/Desktop/MyApp.xcent: invalid length in entitlement blob
After few night try..... finally I found out the solution and just successfully submit the iPad App!!!
The main problem was we used a wrong method to create that stupid MyApp.xcent file!!!!
I used many many method, use Mac text editor, Window notepad, Mac/ Window Dreamweaver as .xml......
but all facing the strange "invalid length in entitlement blob"
why invalid length?!?! so I try to search for what is .xcent..... finally I found the following webpage
http://www.246tnt.com/iPhone/
it's talk about codesign and entitlement files.
then..... I FOUND .xcent NOT ONLY A SAMLPE TEXT FILE!!!!!
in the middle of the link above, there are a highlighted simple script , which is a python script to help us generate a .xcent entitlement file!!!!!
Here is step by step solution to solve this error:
1) just download the .py file here: simple script
2) put the .py file anywhere you like, or just simply put in the root of you mac
3) turn on the Terminal (in /Applications/Utilities), goto the folder where you put the .py
4) TYPE: python gen_entitlements.py 5C297XXXXX.com.yourdomain.MyApp myApp.xcent
Where 5C297XXXXX.com.yourdomain.MyApp is your AppID with BundleID,
myApp.xcent is the file will be generate to you
5) Finally you can see the .xcent which make me nearly crazy for a week!!!!!!!!
6) Use this .xcent file to run that codesign script (Step 4 above)
7) Congratulation the codesign changed and you can zip your app and upload it
I have spent many hours for this simple stuff.........so sad........>.<
Hope this post can help all guys who still mad on this error when trying to upload a iPad only apps.
Good luck!!I think I followed everything very closely, but I am getting these errors when trying to run the codesign script
here is my script command:
/usr/bin/codesign -f -s "iPhone Distribution: Nethercottage Games, LLC" "--resource-rules=/Users/BATC/Desktop/book1.app/ResourceRules.plist" --entitlements "/Users/BATC/Desktop/book1.xcent" "/Users/BATC/Desktop/book1.app"
Here is the error I get:
/Users/BATC/Desktop/book1.app: replacing invalid existing signature
codesign_allocate: object: /Users/BATC/Desktop/book1.app/book1 malformed object (unknown load command 9)
/Users/BATC/Desktop/book1.app: object file format invalid or unsuitable
Any help on this please? -
Step by Step for FICO(GL,Assets and CO) Extraction
Hi gurus,
I am trying to see if i can get a step by step extraction process for FICO extraction cos am abt to start a project to extract and load GL,Asset and Controlling data into a BW system.I am thinking I shd be able to get a lot of the reports needed by installing the 0FI_GL_4.
Please any help will be appreciated and points will be awarded as well.please search the forum before you post a thread, there are lot of threads discussing the same topic.
coming to steps in extraction:
install DS
replicate DS
create transformation between the DS and DSO
the same applies to DSO and cube.
But most of the times, no delivered DS supplements the clients finacial requirement, so if thats the case you would need to enhance the DS with the additional fields that would be needed in the reporting stand point -
Oracle 10gR2 WebService Call-In & Call-Out via PL/SQL (Step-by-Step Guide)
Hi Everyone,
This guide is for those of you who tried to Call-In and Call-Out WebService via Oracle 10gR2 using PL/SQL but failed a couple of times, re-installed a couple of times and retry, got it to work but don't know what made it work scenarios.
Hope this helps ;-)
Thanks,
Henry Wu
Instructions on how to use Oracle10gR2 Webservice Call-Out feature (Oracle JAX-RPC DII - Dynamic Invocation (DII) APIs)
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download 10.1.3.1 Callout Utility for 10g (R1 +R2) RDBMS (ZIP, ~13MB)
http://download.oracle.com/technology/sample_code/tech/java/jsp/dbws-callout-utility-10131.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131
3. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
3.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Prepare the database
1.1 Connect to SYS account (or any account that can connect as SYSDBA)
1.2 alter system set shared_pool_size=96M scope=both
1.3 alter system set java_pool_size=80M scope=both
1.4 ALTER USER SCOTT ACCOUNT UNLOCK;
1.5 ALTER USER SCOTT IDENTIFIED BY "tiger";
1.6 ALTER USER SCOTT QUOTA UNLIMITED ON USERS;
1.7 GRANT PUBLIC TO SCOTT;
1.8 GRANT Create Public Synonym TO SCOTT;
2. Load Oracle SOAP client to SCOTT (for Oracle 10g Release 2 Database)
2.1 Commands
2.1.1 Open command prompt (cmd.exe)
2.1.2 loadjava -u scott/tiger -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\webservices\lib\soap.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\lib\dms.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\jlib\javax-ssl-1_1.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\servlet.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\mail.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\activation.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\http_client.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\ejb.jar
2.1.3 It will take around 3 minutes and you will see "something" like the following when it completes (count may not be exact) :
Classes Loaded: 909
Resources Loaded: 75
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 0
Classes skipped: 0
Synonyms Created: 984
Errors: 0
2.1.3 Close this command prompt
3. Load Oracle JAX-RPC client to SYS (for Oracle 10g Release 2 Database)
3.1 Commands
3.1.1 Open command prompt (cmd.exe)
3.1.2 loadjava -u sys/oracle -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientws.jar C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientdb102.jar
3.1.2.1 It will take around 15 minutes and you will see "something" like following when it completes (count may not be exact) :
Classes Loaded: 4027
Resources Loaded: 81
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 61
Classes skipped: 0
Synonyms Created: 4108
Errors: 0
3.1.3 Close this command prompt
4. Execute UTL_DBWS packages to SYS (for Oracle 10g Release 2 Database)
4.1 Commands
4.1.1 Connect to SYS account only
4.1.2 Execute the following (in TOAD you should execute them as Script, press the "thunder" button)
4.2.1 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_decl.sql"
4.2.2 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_body.sql"
4.2.3 CREATE PUBLIC SYNONYM utl_dbws FOR sys.utl_dbws;
5. Call-out a free Web Service using SCOTT
5.1 Commands
5.1.1 Connect to user SCOTT with password of TIGER
5.1.2 Copy and Paste the following "Anonymous Block" (sample #1) and execute it :
5.1.2.1 It sould return "PL/SQL DII client return ===> Redwood City"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://webservices.imacination.com/distance/Distance.jws';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'DistanceService');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://webservices.imacination.com/distance/Distance.jws?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'Distance');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := utl_dbws.to_qname(l_namespace, 'getCity');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
utl_dbws.add_parameter(call_, 'zip', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('94065');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
5.1.3 Copy and Paste the following "Anonymous Block" (sample #2) and execute it :
5.1.3.1 It should return "PL/SQL DII client return ===> twelve thousand three hundred and forty five"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://www.dataaccess.com/webservicesserver/';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'NumberConversion');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'NumberConversionSoap');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'NumberToWords'
operation_qname := utl_dbws.to_qname(l_namespace, 'NumberToWords');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <operation name="NumberToWords">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle'
-- cannot find xml tag 'encodingstyle', so we just use the following as the generic encoding style
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
-- although 'document' was used, it produced an error, thus we will use 'rpc'
-- this value is generally only 'document' or 'rpc'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- thus the return type is 'unsignedlong', removing 'xs:'
-- however, upon testing, using 'unsignedlong' produced an error, while 'string' did not, so we will use 'string'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- the element name is 'ubiNum', thus we put in 'ubiNum'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the utl_dbws package
utl_dbws.add_parameter(call_, 'ubiNum', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('12345');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following guide http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
I could still not load Oracle JAX-RPC client to SCOTT (step 4) as it produces an error. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=633219&tstart=0
Also, I could not consume some of the other free Web Services out there for reasons I don't know, hope someone can help clarify. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=630733&tstart=0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Instructions on how to use Oracle10gR2 Webservice Call-In feature
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Connect to SYS account and create user STORE
CREATE USER store IDENTIFIED BY store;
GRANT connect, resource TO store;
2. Connect to Oracle using the user STORE and password STORE
CONNECT store/store;
3. Execute the following objects for this excercise
CREATE SEQUENCE order_sq;
CREATE TABLE product_types (
product_type_id INTEGER
CONSTRAINT product_types_pk PRIMARY KEY,
name VARCHAR2(10) NOT NULL
CREATE TABLE products (
product_id INTEGER
CONSTRAINT products_pk PRIMARY KEY,
product_type_id INTEGER
CONSTRAINT products_fk_product_types
REFERENCES product_types(product_type_id),
name VARCHAR2(30) NOT NULL,
description VARCHAR2(50),
price NUMBER(5, 2)
CREATE TABLE customers (
customer_id INTEGER
CONSTRAINT customers_pk PRIMARY KEY,
first_name VARCHAR2(10) NOT NULL,
last_name VARCHAR2(10) NOT NULL,
dob DATE,
phone VARCHAR2(12)
CREATE TABLE orders (
order_id INTEGER
CONSTRAINT orders_pk PRIMARY KEY,
product_id INTEGER
CONSTRAINT purchases_fk_products
REFERENCES products(product_id),
customer_id INTEGER
CONSTRAINT purchases_fk_customers
REFERENCES customers(customer_id),
quantity INTEGER NOT NULL
INSERT INTO customers (
customer_id, first_name, last_name, dob, phone
) VALUES (
1, 'John', 'Brown', '01-JAN-1965', '800-555-1211'
INSERT INTO product_types (
product_type_id, name
) VALUES (
1, 'Book'
INSERT INTO products (
product_id, product_type_id, name, description, price
) VALUES (
1, 1, 'Modern Science', 'A description of modern science', 19.95
COMMIT;
CREATE OR REPLACE PACKAGE dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2;
END dbfunc;
CREATE OR REPLACE PACKAGE BODY dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2 IS
v_customer_count INTEGER;
v_product_count INTEGER;
v_order_id INTEGER;
BEGIN
-- count the number of products with the
-- supplied p_product_id (should be 1 if the product exists)
SELECT COUNT(*)
INTO v_product_count
FROM products
WHERE product_id = p_product_id;
IF v_product_count = 0 THEN
RETURN 'No such product';
END IF;
-- count the number of customers with the
-- supplied p_customer_id (should be 1)
SELECT COUNT(*)
INTO v_customer_count
FROM customers
WHERE customer_id = p_customer_id;
IF v_customer_count = 0 THEN
RETURN 'No such customer';
END IF;
-- get the next value from orders_sq
SELECT order_sq.nextval
INTO v_order_id
FROM dual;
-- place the order
INSERT INTO orders (
order_id, product_id, customer_id, quantity
) VALUES (
v_order_id, p_product_id, p_customer_id, p_quantity
COMMIT;
RETURN 'Order placed with id of ' || v_order_id;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RETURN 'Order not placed';
END place_order;
END dbfunc;
4. Install and Configure OC4J
4.1 Change Directory
4.1.1 Open command prompt (cmd.exe)
4.1.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\bin
4.2 Configure Environment variables (type in command prompt)
4.2.1 set JAVA_HOME=C:\oracle\product\10.2.0\db_1\jdk
4.2.2 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
4.3 Starting OC4J for the first time
4.3.1 oc4j -start
4.3.2 If this is not your first time to "start" oc4j, go to step 4.3.4
4.3.3 Set oc4jadmin password (use the password "oracle" w/o the quotation marks)
08/03/21 17:13:54 Set OC4J administrator's password (password text will not be displayed as it is entered)
Enter password:
Confirm password:
Confirm password: The password for OC4J administrator "oc4jadmin" has been set.
08/03/21 17:14:01 The OC4J administrator "oc4jadmin" account is activated.
4.3.4 OC4J has started if you see the message :
08/03/21 17:14:16 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
4.3.5 Leave this command prompt open
4.4 Configure Data Source
4.4.1 Open a new command prompt via the cmd.exe command
4.4.2 type "hostname" and then press enter
4.4.3 Keep this command prompt open for later use
4.4.4 Open Windows Explorer and navigate to the folder C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
4.4.5 Open the file data-sources.xml
4.4.6 Modify and Save the file so that it will look something like the following :
4.4.6.1 Note that "hpv2710us" is my hostname found in step 4.4.2
4.4.6.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<connection-pool name="Example Connection Pool">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
user="store"
password="store"
url="jdbc:oracle:thin:@//hpv2710us:1521/ORCLDEV">
</connection-factory>
</connection-pool>
4.4.7 Close the text editor
4.4.8 Close the Windows Explorer
4.4.9 Close this command prompt (type exit)
5. Publishing a PL/SQL Package as a Database Web Service
5.1 Create the config.xml file
5.1.1 Open Notepad.exe
5.1.2 Copy and Paste the following :
5.1.2.1 Note that "hpv2710us" is my hostname found in step 4.4.2
5.1.2.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<web-service>
<display-name>PLSQL Web Service</display-name>
<description>PLSQL Sample</description>
<destination-path>./dbfunc.ear</destination-path>
<temporary-directory>/tmp</temporary-directory>
<context>/plsqlsample</context>
<stateless-stored-procedure-java-service>
<jar-generation>
<schema>store/store</schema>
<db-url>jdbc:oracle:thin:@hpv2710us:1521:ORCLDEV</db-url>
<prefix>db.func.place.order</prefix>
<db-pkg-name>dbfunc</db-pkg-name>
</jar-generation>
<uri>/dbfunc</uri>
<database-JNDI-name>jdbc/OracleDS</database-JNDI-name>
</stateless-stored-procedure-java-service>
<wsdl-gen>
<wsdl-dir>wsdl</wsdl-dir>
<option name="force">true</option>
<option name="httpServerURL">http://localhost:8888</option>
</wsdl-gen>
<proxy-gen>
<proxy-dir>proxy</proxy-dir>
<option name="include-source">true</option>
</proxy-gen>
</web-service>
5.1.3 Save file as config.xml in the directory C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
5.1.3.1 Note it should be config.xml and not config.txt
5.1.4 Close the text editor
5.2 Publish dbfunc Oracle Package as a Web Service
5.2.1 Open a new command prompt via the cmd.exe command
5.2.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home
5.2.3 mkdir ear
5.2.4 CD ear
5.2.5 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
5.2.6 set CLASSPATH=.;%ORACLE_HOME%\webservices\lib\wsdl.jar;%ORACLE_HOME%\lib\xmlparserv2.jar;%ORACLE_HOME%\soap\lib\soap.jar
5.2.7 java -jar %ORACLE_HOME%\webservices\lib\WebServicesAssembler.jar -config C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config\config.xml
Please wait ...
STORE.DBFUNC
5.2.8 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -deploy -file C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\ear\dbfunc.ear -deploymentName dbfunc
08/03/21 17:46:23 Notification ==>Application Deployer for dbfunc COMPLETES. Operation time: 296 msecs
5.2.9 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindWebApp -appname dbfunc -webModuleName dbfunc_web
5.2.10 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindAllWebApps -appname dbfunc
5.2.11 Close this command prompt (type exit)
6. Test dbfunc Web Service
6.1 Restart OC4J
6.1.1 Open the command prompt you used to start OC4J in step 4.1.1/4.3.1
6.1.2 In the keyboard, hit Ctrl+C
6.1.2.1 Type "Y" and then hit Enter
08/03/21 18:02:51 Shutting down OC4J...
Terminate batch job (Y/N)? Y
6.1.2.2 Note that the command prompt should still be open
6.1.2.2.1 If you accidentally closed the command prompt just do the following
6.1.2.2.1.1 Do 4.1.1 to 4.2.2 and then proceed to 6.1.3
6.1.3 oc4j -start
Starting OC4J from C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home...
08/03/21 18:07:57 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
6.1.4 Leave this command prompt open
6.2 Use the Web Service to "Order an Item"
6.2.1 Connect to Oracle using the user STORE and password STORE
6.2.2 select * from orders
6.2.2.1 Zero row should return
6.2.3 Open Internet Explorer
6.2.4 Navigate to http://localhost:8888/plsqlsample/dbfunc
6.2.5 Input the following :
6.2.5.1 param0 value: 1
6.2.5.2 param1 value: 1
6.2.5.3 param2 value: 10
6.2.6 Click the Invoke button
6.2.7 A pop-up window will appear having the following contents :
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <SOAP-ENV:Body>
- <ns1:placeOrderResponse xmlns:ns1="http://db.func.place.order/dbfunc.wsdl" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:string">Order placed with id of 1</return>
</ns1:placeOrderResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
6.2.8 Go back to SQLPLUS or Toad and execute "select * from orders" again
6.2.8.1 There should be one row
ORDER_ID, PRODUCT_ID, CUSTOMER_ID, QUANTITY
1, 1, 1, 10
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following article by Jason Price http://www.oracle.com/technology/pub/articles/price_10gws.htmlSuccess!!!
I had to grant this permissions:
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'accessClassInPackage.sun.util.calendar', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'setFactory', '' )
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.util.PropertyPermission', 'HTTPClient.socket.idleTimeout', 'write' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', 'localhost', 'resolve' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', '127.0.0.1:8084', 'connect,resolve' );
As I wrote earlier, WS_TEST is my user into which I load JAX-RPC client. Note that, if you load JAX-RPC client into user another than SYS, you have NOT to use -s -grant public option (wassam wrote about this too). Another thing is that I (finally) didn't load OC4J. To consume WebService I use utl_dbws.invoke(call_Handle CALL, request SYS.XMLTYPE) function.
voytec001 -
I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.
Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option. -
Step-by-Step Guide for connecting CRM with SAP R/3 system Server
Hi Experts,
For my ongoing project , I am in the need of connecting the CRM server with
SD server.
Can u share any Step- By Step guide for doing that.
I know that the RFC connection has to be established between the system.
Logical system must be create and all such stuffs.
It is definitly helpful, If u can help me out.
I would to thank, appreciate and reward for your help
Best Regards,
ManiprabuHi Mani,
Follow the following steps :
1. Create RFC destination for both the systems on CRM and R/3 in SM59.
2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
3. Create a user in the R/3 table CRMCONSUM with the name CRM.
4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
Create an entry for following parameter entry:
Key - R3A_COMMON
Para name - CRM_DEFAULT_DESTINATION
Value - R/3 logical system
5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
CRMRFCPAR :
Create new entry with following data:
User - CRM
Object name - *
RFC Destination - RFC destination for CRM
Load types - All Load Types
In Queue flag - X
Send XML No XML
CRMPAROLTP :
Create the following parameter entry:
Para name - CRM_DEFAULT_DESTINATION
User - CRM
Value - Name of the CRM logical system
6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
7. Register the queues in SMQR and SMQS transactions.
PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
<b>Reward points if it helps.</b>
Maybe you are looking for
-
I am loading multiple sub-reports (up to 40) into a master report document using the Crystal SDK. This is accomplished by obtaining a reference to the detail area, adding a section to it, and then importing the subreport into the detail area. The mas
-
Active Directory Sites + Boundary Groups + Database not showing correctly?
I am having a hard time trying to track down my issue but after digging for a bit, I think I have figured it out but I am unsure how to fix it. Quick backstory, we had a domain controller go bad in this ADsite, the domain controller was also a DP at
-
first of all, php works and so does the connection to the mysql database, but when i go to http://localhost/phpMyAdmin i get nothing not even an error what could be wrong?
-
I sycned my photos to my itouch now i can't delete it help
i tried to put photos into my itouch. i got that too work but when i wanted to delete it it didn't let me (no options to delete) help
-
Multiple Step Error Caused by SQL Syntax?
Hi All: I am getting a multiple step error when I do this: rs.Fields("MyField").Value = MyValue I finally tracked down the error to being caused by this syntax: SELECT a.* FROM MyTable a or SELECT a.MyField FROM MyTable a However, this syntax works j