Stepper drivers for LIFA

Hi ,
Could I please know what stepper drivers are compatible with labVIEW interface for arduino (LIFA)? I know the easy driver and the big easy driver work. Are there any other suitable stepper drivers? Can we use a L6470? Thanks in advance.
Muditha

National Instruments does not have any specific drivers that communicate with the drivers that you mentioned. However, most stepper motor drives move using step and direction commands. If you wish to control the dirve with LabVIEW you will more than likely need a DAQ device perhaps a USB-6008 or USB-6009 so that you can use labVIEW to generate the control i/o. This Example includes code to generate step and direction signals using sw timing on a National Instruments data acquisition device.
Regards,
Isaac S.
Applications Engineer
National Instruments

Similar Messages

Cannot find drivers for HP laserjet 1000

for the love of GOD, can someone tell me why this is so difficult?
I'm on OSX 10.6.8 and the one printer that apple did not install drivers for is the one I am using: HP LASERJET 1000.
I have scoured the forums, and the queries that have been answered date back to four years ago, with the referenced links leading to non-existent sites.
Finally, I found some information.
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
What, pray tell, do I need to do to print something? Why is this so difficult?
Please help save a human life today; give me the answers.
It's good karma
PS: contrary to my product listed, this matter concerns an iMac, not a macbook pro. thanks!

Joni Chacho wrote:
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
That page is an old page. It should have redirected you to http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic .
Message was edited by: Matt Broughton

My hp M6 k015dx drivers for windows 10

My hp M6 k015dx all drivers for windows 10....

VvEaKy_VvaQaR wrote:
My hp M6 k015dx all drivers for windows 10....
Hi,
Too early to ask, they may come one day. HP people are testing new Windows 10 like you and me and they will anounce a list of machines which support Windows 10, similar to Windows 7, 8 and 8.1 (note: not all machines will support Windows 10).
Please use Windows 10 updates, it's very good on my machine, only 1 driver missing and I won't bother to find it now because it MAY come at a later date (or it may not come at all. That's life).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite P500 (PSPE8U) - Can't find drivers for it

Hi there,
I've been up and down these forums to no avail. I've looked at loads of forums for drivers for my P500. I've been through the support pages of the toshiba websites of australia, Europe, Uk and japan.. no luck either. I've tried to contact the ebay seller I bought it from, apparently he's out of business now. Needless saying that the laptop came without any driver disk. Unfortunately one of the hard drives died on me and didn't have time to do a recovery disk with all the drivers. So now I'm really stuck. These are the details of the laptop should anyone have any brain wave for me -
P500 - PSPE8U
Windows Vista 64bit
ATI HD 4650
At the moment the biggest headache are the video drivers and my battery life is close to 30 mins without the toshiba software. The stock resolution is disasterous without the right driver. I tried the ATI46** drivers from their website but the application tells me that my hardware is not supported.
Any help would be much appreciated.
Thanks
Chris

Hi Chris,
Satellite P500 with PSPE8U model number belongs to the US models and therefore all drivers and tools you can find on Toshiba US page:
http://www.csd.toshiba.com
Just check the bottom side of your notebook again for exact model number like P500-S1234, then you can find the correct drivers for you model. :)

Control 2 stepper drivers 6036-E card?

I have 2 third party stepper drivers that take Step/Direction/Enable inputs.
Enable is low-active and I am not using it.
I want to control both motors from my 6036-E card and SCB-68, but do not need to control both at the same time.
The standard example code for pulse train generation running in parallel with standard example code for DIO line control does the trick for an individual stepper driver.
The problem is when I try to do both. I recognize that one pulse generator uses both counters, so I need to "release" the resources of the first pulse train generator before I attempt to control the second driver. I configure ctr/0 and DIO/Line0 for stepper 0, and ctr/1 and DI)/Line1 for stepper 1.
I have been attempting to use event structures to perform the task in the "blind" hope that the event structure will fully process the first event and close the task before processing the next event.
Can anyone take a look at the attached VI and tell me what I am doing wrong, or point me the proper direction?
Thank You,
Barry
Attachments:
XY Stage Manual Control.vi ‏95 KB

Attached find a .VI that will provide Step and Dir outputs for X-Y movement using a multifunction DAQ card. Written in Labview 8.2. Only one axis can move at a time becuase the vi's used for the step output uses both of the board's counters in order to function.
Barry
Attachments:
XY Stage Manual Control2.vi ‏106 KB

Need latest graphic card drivers for Satellite Pro M70

I've had this PC for only a few months now and i've been disappointed to have heard that my drivers are WAY out of date. The only drivers i can find are on here and they are only v.8 something (although the game reads this as an older version).
The problem comes in when i want to play games like Half Life 2 and CSS, the game crashes because these drivers are out of date. Where can i get the LATEST drivers for the ATI Mobility Radeon x700 card for the Toshiba Pro M70?

Hi Stephanus
First of all you must not be disappointed about that because you must understand few things. Because of notebook construction it is not recommended to force graphic card to run at the limit. Using latest drivers you do exact something like that. More performance means more warmness and I hope yo know very well what happen when notebook is too hot.
I am not 100% sure but I presume that Toshiba priority is to provide hardware protection. I saw that some other notebook manufacturers offer latest drivers but there is also notice that they are not responsible if something goes wrong.
One more thing: you have mobile computer and not desktop.

Qosmio G50-115 - Where can I find the drivers for XP?

Hi
I've bought G50-115 and Vista was really frustrating me. I tried to install XP however I had many troubles that I couldn't find its drivers.
How can I find its driver for XP?
Is there anyone who achieved to install XP?
Thank you

I managed to get XP working on a G50/04J and it works well. Video drivers were a bit of a nightmare.
The posts above are accurate though. Vista and windows7 are becoming more prevalent. Many features are not available for XP.
Issues with XP:
No drivers made for the glowing media buttons (they still glow and beep)
No drivers for the video resizer (the thing that resizes VGA and xVGA to HD)
Other note:
Battery life is 30% longer in vista.... more overhead, yet less power... go figure.
the 64-bit version of vista runs some software heaps quicker than XP-64bit.
Other than this. check this [previous post|http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=154798&#154798] for what I did
Peace

Where can I find drivers for dvd device?

Hi guys,
Hi want to install Windows 7 but when I am running setup windows asks for drivers for dvd device.
Where can I find these drivers or how can I install windows 7?
I know hp does not support serie tx1000 in windows 7 but I have seen people who installed that OS.
any help will be usefull
thanks!

I just got off the phone with a new case manager named Jamie 1-877-917-4380 ext 93 regarding new case number 7501359724, and of course just what I expected he would say, HP has no known issue with the tx series and no issue with the Nvidia 6150 chip. He said that its just a coincidence that 1000's and 1000's of owners have experienced overheating motherboards. That despite the same symptoms of other hp laptops and their recall proceding a huge lawsuit with Nvidia admitting they had sold hp defective chips, the tx/ 6150 nvidia was not one of the defective chips. After reading the lawsuit details I found that Nvidia never released a list of the exact defective chips just that there were some, and then settled with hp. Hp for some reason or another made a list of the so called defective ones and left many of the additional defective ones including the tx series/ Nvidia 6 series chips off the list. Maybe there are not as many of us that own it, so as a business move they felt they could get away with this, or maybe because the failure typically hits a month or two after warranty expires. I even looked up the chip by itself and found that the same Nvidia 6150 chip was used in certain Dell notebooks and had an issued recall relating to its defect. Yet Jamie from Hp clearly stated that there is no known defect and that I would need to pay 400.00 USD and get the mother board replaced. I told him that I wasn't going to do that, why would I spend 400 dollars to have a new defective mother board intsalled to fail again. He assured me that it wouldn't be an issue because the new mother boards have a different set of chips due to the issue with the old chip. What is that about? Does he think I am stupid, they say there is no defect in that chip, so they wont take responsability but they admit there is an issue with the chip, what is the difference? They change the word defect with issue and that excuses them from any liability in providing a product capable of delivering expectations and quality of its class. I personally wont settle for this. I wont settle for less than a refund or a new equall value notebook free from defect with an extended warranty. To all of you others with this model of notebook i suggest you do the same, don't give up on your right to defend your hard earned money. Look up Nvidia 6 series chips and you will find many companies that have disclosed its defect and taken responsability to their product owners. Hp needs to do the same. Shame on HP I had to edit this because they keep deleting my posts to cover up there secret, you can try and follow the trouble shooting tips, but it wont work, the graphics card has burned up and is killing your mother board. A company invested a lot of money only to realize they can either lose a lot more money or they can brush it under the rug at the expense of their customers, and so they try to sustain profitability, by hiding the truth. I suggest you buy a msi netbook, it has no frills but I promiss it will last, msi knows how to make a strong motherboard and stand by their products, no use in buying a fancy computer when it will only tease you with 13mons of life. I am sorry that myself and all of you put your hard money and trust into a product that was probably knowingly doomed before it was even sold to us. Just remember that in this economy even a large company that you think you can trust can't be trusted, MONEY trumps the consumer!!

Optiplex 360 drivers for Server 2003

I have an Optiplex 360 that is running Windows Server 2003 and the video card does not have any drivers loaded for it. I believe it has the Intel graphics installed, of the 4 I see available on this PC, but I have been unable to find a suitable driver for it. I have tried downloading the drivers from support but none of them work. Any suggestions would be greatly appreciated.

With older drivers there may be certificate issues meaning that you will have to roll back the date / time and or install the driver in compatability mode. Directx and Video and Audio Service and drivers are DISABLED BY DEFAULT in 2003 server. I installed 2003 server on my 360 and it worked fine including the drivers. But its not cookie cutter out of the box. You have to enable the proper services BEFORE installing the drivers. The intel Drivers are not the proper drivers for an addin video card AND Chipset Drivers MUST BE INSTALLED first before anything else.The forum is not a step by step support for an end of life operating system on an unsupported platform. Even microsoft paid support does not accomodate teaching how to install server drivers on non servers.
Intel Chipset Software Installation Utility, v.9.1.1.1015, A01 View details
R227558.exe
Intel G31/G33/Q33/Q35 Graphics Controller, v.6.14.10.4957, A06 View details
VIDEO_DRVR_WIN_R234838.EXE
Analog Devices ADI 198x Integrated High Definition Audio Driver View details
R228747.exe

Update drivers for NVIDIA GeForce GT 330M

Need the updated drivers for NVIDIA® GeForce® GT 330M that comes with my Vaio Z VPCZ128GX , the drivers in eSupport are from 2010, and nVidia software does not detect the 330M card
VPCZ125GX

I've updated my VPCZ1 to 340.43 drivers but it still won't accept the transition to Windows 10, seems like they just want to find any excuse to back out of their promise of a free upgrade for windows 7 users. For anyone who is editing .inf files and still not able to get it to work, you need to update your intel drivers first. The process is a bit awkward, I tried to update the Geforce with a few pre-modded drivers, using the device manager. It would always freeze during installation or ask to reboot and start in 800x600 resolution. I also tried the latest intel drivers but was unable to update them at the time, so I gave up on the idea for a while. Later, I ran into trouble running GTAV, the game would start fine but suddenly crash to desktop while loading. I remembered how the latest driver broke the intel driver, so I rebooted with the laptop in "stamina", installed the latest compatible onboard graphics driver and rebooted in "speed" mode, which incapacitated the 2010 nvidia driver so I had a new "unknown device" under "display adapters" in the device manager. I pointed it to the 340.43 drivers (latest driver I could find for 330m which still uses inf files) which I modified earlier and success, GTAV now runs. Editing inf files is surprisingly simple, just find mention of "330m" in one of the inf files (which are lists of subsys numbers) and replace the subsys number with the one from your card in device manager when using the 2010 drivers. (there are alraedy a lot of them in the inf, I guess it's true that no two 330m are the same) I've always left it on "speed", ever since it booted with the new drivers, The GPU is easily underclockable using Precision X for more battery life. http://i59.tinypic.com/swd3lx.jpg Only side effect I know so far is that the screen rotation doesn't work, although I never tried it with the old driver combo.

Vista drivers for the Libretto U100?

I've read reports on the net of people running Vista on UMPC's such as the Samsung Q1, given that the spec of these units is lower than the Libretto it's got me thinking to install Vista on the Libretto... are Toshiba planning to release any Vista compatible drivers for the U100?
I realise it's a rare device but it'd be a nice showcase device.
thanks.

Hi, yes, I realise the Libretto is end-of-life... which is a crying shame, it's a fantastic device.
Well, to answer my own question I loaded my Vista Business Upgrade on my Libretto U100 last night. I've previously upgraded the Libretto to 1Gb of RAM and Vista upgraded without complaint. It doesn't run Glass, the particular model of Intel graphics on the Libretto is not compatible... but the OS itself seems to run well enough.
Everything so far seems to be working... network (wired and wireless) is detected and I can connect easily to my WPA protected WLAN, the graphics drivers set the resolution and colour depth correctly and sound is working.
Hibernate and suspend behave normally (as tested so far) ... the only thing I haven't tried is Bluetooth.
Hurrah.

Drivers for CB Isa-GPIB/LC

Hey
Does anybody know if Labview comes with some drivers for the DB ISA-GPIB/LC
pc card? or maybe somebody know how I can get this driver's for labview ?
thanks
Gorgo
- Ze swiata kazdy ma tyle, ile sam sobie wezmie.
- Things with don't kill you - make you stronger
- He just want from us to be happy
- Only one life that soon is past
Only what's done with love will last

LabVIEW only comes with drivers for NI gpib cards. You'll have to contact the manufacturer of the card for drivers. If this is a ComputerBoards product, they are now called Measurement Computing.

T500 Drivers for Server 2003

Hello,
I have installed Server 2003 on lenovo T500, but i cant find drivers for it.
Does anybody know where i can get drivers for it?

With older drivers there may be certificate issues meaning that you will have to roll back the date / time and or install the driver in compatability mode. Directx and Video and Audio Service and drivers are DISABLED BY DEFAULT in 2003 server. I installed 2003 server on my 360 and it worked fine including the drivers. But its not cookie cutter out of the box. You have to enable the proper services BEFORE installing the drivers. The intel Drivers are not the proper drivers for an addin video card AND Chipset Drivers MUST BE INSTALLED first before anything else.The forum is not a step by step support for an end of life operating system on an unsupported platform. Even microsoft paid support does not accomodate teaching how to install server drivers on non servers.
Intel Chipset Software Installation Utility, v.9.1.1.1015, A01 View details
R227558.exe
Intel G31/G33/Q33/Q35 Graphics Controller, v.6.14.10.4957, A06 View details
VIDEO_DRVR_WIN_R234838.EXE
Analog Devices ADI 198x Integrated High Definition Audio Driver View details
R228747.exe

Drivers for HP Pavilion model no: p6-2302eam.

I have a new HP Pavilion (model no: p6-2302eam.) Cannot for the life of me find the list of drivers for this PC via HP uk website. I have searched the via the product number (C3T77EA#ABU) and above model number ot no avail.
Closest I can find is HP Pavilion p6-2310ea Desktop PC › Is this the same?
Cheers
John

No support page update for the p6-2303ea/eam yet. Did go live on the HP Part Surfer... C3T77EA / HP PAVILION P6-2302EAM BNDL PC UK and the motherboard is a HP customized Foxconn H-Joshua-H61-uATX (Joshua).
Chipset is Intel H61
Integrated Graphics Chip is Intel
Integrated RTL8171FH-CG LAN is Realtek
Integrated 92HD73E Audio is IDT
USB 3.0 may be Texas Instruments
You may be able to use the HP s5-1224 Windows 7 Drivers on your computer as it uses the same Joshua-H61 motherboard as your computer.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

New updated ATI drivers for MBP

Hi!
I would like to know where I could find new drivers for the ATI chip? When I play Half Life 2 the system asks for updated drivers, but when I look around at www.ati.com/drivers I can´t find any drivers that fit my system....
They have a support site for ATI Mobility Radeon, but they don´t support Apple..
Does anyone know how to find the latest drivers?
MacBook Pro 15 2,16Ghz Windows XP

If you want a tiny bit better preformance, though more for the fact of better stability and the possibility to overclock it to the 'proper' clocks, i suggest the omega drivers. www.omegadrivers.net - simple, and easy to install. They are the latest catalysts also from when i last checked. They also wont give you a hassle if you overclock teh card, unlike teh apple ati ones
good luck!

Stepper drivers for LIFA

Similar Messages

Maybe you are looking for