Steps For Updating the IDOC Status using ALEAUD

Hi all,
My Scenario  is : R/3(IDOC)--> Legacy System(File).After the IDOC is received successfully on the Receiver System.I should Update the Status of IDOC on the Sender System.
Can anyone help me out :
What all the Steps & Configurations involved for Sending an Acknowledgement & Updating the IDOC status  from the Legacy System.
Thanks in Advance,
Dattatreya.

Hi,
  You may need to set up another flow (a reverse one), where the Legacy sends a msg to XI with the Idoc number of the initial idoc you sent (onward flow).
  now, you can map the idoc number in E1ADHDR/E1STATE/DOCNUM and other statuses as required (in various tags) and also other information as per your environment. Pls see the below links
Re: Acknowledgements ever switch to Status 39
Re: Asyncronous acknowledge from file adapter
Re: R3<->XI<->Auto-ID:How to check result of Idocs sending out from R3 in aii ?
Regards
Vishnu

Similar Messages

  • Can i Change/Update the Lead Status using Action profile of Activity.

    Hi,
    I have created one Lead, and on the basis of Qualification level action triggers and Ativity getting generated.
    I want to know that it is possible by using functions(Action Profile/conditions) in activity, If i change the status reason of Activity (as Accepted) Earlier Leads status would change.(as Close)
    Please resolve with solution.
    Regurds,
    Dipesh.

    Hi Dipesh,
    What I understand is, u wish to change the status of preceding lead transaction when the activity status reason is changed to accepted.
    1.  This functionality can be achieved using ORDER_SAVE Badi. This Badi implementation shall check the activity reason changed to accepted, if yes, read the doc flow, get the lead transaction and change its status to close.
    2. As per my knowledge use of action profiles and conditions will not be helpful in this case.Else, create an action definition as Activity reason changed, put a condition which like Activity reason= Accepted.
    In the action definition Processing type use method call.
    Here u will have to create a new implementation of the BADI of action profile, and put the same logic as stated in point 1.
    But in think implementing point 1 should be easier.
    Wish the information is useful.
    Regards,
    Shalini Chauhan

  • Steps to load the data by using flat file for hierarchies in BI 7.0

    Hi Gurus,
    steps to load the data by using flat file for hierarchies in BI 7.0

    hi ,
    u will get the steps int he following blog by Prakash Bagali
    Hierarchy Upload from Flat files
    regards,
    Rathy

  • HT4972 please send the steps for update ios 4 to tos 6 in iphone 4

    please send the steps for update ios 4 to ios 6 in apple iphone 4

    iOS 6 is no longer available. You can only upgrade to 7.0.4.

  • Updating the User Status in Sales Order Item

    Dear Gurus,
    Iam trying to update the User Status on the SO item using STATUS_CHANGE_EXTERN function module and the status is successfully getting updated.
    But the problem is if Iam updating the status it has to delete the Purchase Requisition assgined to it, which is not happening.. whereas when Iam manually changing the Status, the PR is getting deleted.. Can anyone suggest some other function module or some other way of doing it other than BDC?
    Best Regards,
    Sreenivas.

    Hi ,
    I am also need to update the Item user status. Could you please provide me the logic for the FM 'STATUS_CHANGE_EXTERN'. And also let me know the where we need to write the logic in VA01/VA02.
    It would be helpful me a lot.
    Thanks
    Srihari.

  • Issue with the configuration of http xml port for sending the idoc

    Hello,
          I am planning to send multiple idocs in a single file using http xml port.
    Presently I am trying to send a single idoc, but am having the issue.
    I am trying to create a RFC for HTTP XML port of type H i.e. HTTP Connection to ABAP System
    In the how to guide for - How Tou2026 Send Multiple IDocs Within One XI Message
    ( https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b )
    the following parameters are defined for the path prefix -
    RFC destination of type H (HTTP Connection to R/3 System).
    Specify the path prefix as follows:
    /sap/xi/adapter_plain/
    ?namespace=< your namespace>
    &interface=<IDoc_Type>
    &service=<Sender System>
    &qos=EO (or EOIO).
    I am trying to use the following prefix -
    /sap/xi/adapter_plain/
    ?namespace=urn:sap-com:document:sap:idoc:messages ( this is the standard namespace of SAP for all the idocs)
    &interface=DEBMAS05 (Idoc type )
    &service=SNDLS100 ( ECC system name )
    &qos=EOIO
    On testing the RFC connection, I am getting the error of page not found.
    Can anyone please give me pointers for the issue.
    Regards,
    Mayank

    Thanks Barry!!!
    Now I am getting a different message.
    In RFC...it is giving me the following message ->
    Status HTTP Response     204
    Status Text     Body is empty
    In case of Idoc, the status is till 02...
    the error description for the idoc is --
    "When transferring the IDoc by HTTP, the return code with the message '500<SAP:Error><SAP:Category>XIServer</SAP:Category><S' has occurred.
    The target address was: http://emgeccsnd1:8001/sap/xi/adapter_plain/?namespace=urn:sap-com:document:sap:idoc:messages&interf
    Check whether the IDoc can be sent again.
    It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards"
    I am still not able to resolve the issue.
    Regards,
    Mayank

  • How to change the IDOC Status from 30 to 03

    Hi Friends,
    In the Partner Profiles Collect IDOCS option is Selected and the Output mode is 4.
    In my Custom Program i am Using the Function Module MASTER_IDOC_DISTRIBUTE to generate the IDOCs
    I am getting the IDOCs of Status 30.
    then in my Custom Program, I am Submitting the IDOCs to RSEOUT00 program.
    to change the IDOC status from 30 to 03.
      SUBMIT rseout00 USING SELECTION-SCREEN '1000'
                   WITH docnum  IN  gt_range_idocs
                   WITH p_compl EQ 'Y'
                   AND RETURN.
    but still i am not getting the IDOCs of changed status.
    I need to get the Changed IDOC status and if the IDOC status is not changed then I need to generate an Error file for the IDOCs data and send that data to customers as a mail.
    so my requirment is to call the RSEOUT00 in the Custom Program and Change the IDOCs Status to 03.
      When i am Executing the RSEOUT00 Indidually by giving the IDOCs numbers, then the IDOCs Status is going to change to 03 from 30.
    Kindly Guide me how to proceed furthur
    Thanks in Advance,
    Ganesh

    Thanks Shrishit,
    RC1_IDOC_SET_STATUS changing the Status from 30 to 03.
    Its fine, But my Question is will IDOC Data will be reached to XI Server or not.??
    means is the functionality of this Program is same as the RSEOUT00.
    MY job is to change Status from 30 to 03 only
    and then Check the Status of those IDOCs, and if the IDOC is not sended to XI  i.e.;03 status, then I need to send the Details of IDOC (i.e.; data in filed IDOC) to Customer Mail ID through an Attachement.
    I hope you Understood my AIM, why I need to change the Status in my Custom Program only, by submitting IDOCs to this report .
    Kindly waiting for your reply,
    Thanks in Advance,
    Ganesh

  • How to update Sales Order status using  BAPI_SALESORDER_CHANGE

    Hi,
    I want to update Sales Order status using BAPI_SALESORDER_CHANGE, this BAPI is called from middle ware, but there is no parameter to pass the status value to this function, please help me how to update sales order status using BAPI only.
    Thanks
    RK

    Hi,
    Can u give me details of what status u would like to update in sales order.
    If we are able to update the status from VA02, Then BAPI will assist for the same.
    Regards.

  • Browser unable to update the service status bits

    I am having an issue with my computer becoming non-working. After a period of time of inactivity and then I go to use the computer, I can move the mouse cursor around but can do nothing else. I have noticed that when moving the cursor around that when I move it to the task-bar I get the hour glass waiting icon. I checked the event viewer and in the applications log I have numerous errors which say "The browser was unable to update the service status bits" Can you explain this and are there any fixes? Thank you

    Hi Avinash,
    Yes, CTS_BROWSER service is active. It was working before when I click to test. Unfortunately, it started throwing error. We are on SP13 in SOLMAN. I'm using solman as an ABAP stack.
    Thanks for your time.

  • Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

    Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

    Hello Kewal,
    Thank you for the details of the issue you are experiencing when trying to perform an update.  I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first. 
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Creation of function module for updating the ztable

    Hi,
    I am sending the requirement for ceation of function module for updating the ztable.
    Requirement----
    Table Updation rule (New record)
    While creating a new record the calling function will export the following to the table handling function.
    Table field     Probable Values
    ZORDERNO------->     Sales Delivery no in case of sales orderShipment no in case of transfer order
    UNAME----
    >     User ID
    ZORDTYPE----
    >     SALEOR in case of sales orderTRANSF in case of transfer order
    ZREFDOCNO----
    >Sales Order no in case of sales orderPurchase Order no in case of transfer order
    ZREFDOCNO1----
    >Delivery no in case of transfer order
    The table handling function will calculate the following fields
    Table field     Probable Values
    ZREQNO----
    >Running serial number (incremented by 1 for each new record)
    ZREQDAT     -
    >System date
    ZREQTIME----
    >     System time
    ZSTATUS----
    >OPEN (for all new records)
    Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
    Table Updation rule (Status Update)
    While updating a record the calling function will export the following to the table handling function.
    Table field     Probable Values
    ZORDERNO----
    >Sales order no in case of sales orderShipment no in case of transfer order
    ZSTATUS----
    >CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
    The table handling function will calculate the following fields
    Table field     Probable Values
    ZSTATDAT----
    >System date
    ZSTATTIME----
    >     System time

    Do you have to create/update new record in Ztable through Function Module ?
    or you need to write FM only for validation?
    Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
    Let me know clearly what exactly u need ?
    Regards,
    Kiran

  • Desing requriment for processing the IDOC in real time

    hi Gurus,
    we have a requirement to design for processing the IDOC in real time i.e.all the IDOC must be store and process for give time line with out using BPPM tool.we have suggested to use cache storage or storing the files in file adapter.
    please suggested good process with out compromising the Performance of PI.
    regards
    shankar

    hi Raj,
    Please find the example below for your reference
    let say
    System A-->PI--
    >system B
    system A sends multiple files based on time(daily or weekly) and real time( as an when the record created) to systerm B (CRM) in the form of IDOC Via. PI
    we needs to club the real time files and send it to system B.How best we can do without using BPM.
    regards
    shankar

  • How to update the FB01L transaction using the FM  bapi_acc_document_post

    Hi All,
            How to update the FB01L transaction using the bapi_acc_document_post but there is no ledger group field in the bapi function module.
    Please help me how to do it.

    hi,
    use batch input method for the same.
    check this.
    [https://forums.sdn.sap.com/click.jspa?searchID=19107237&messageID=884744]

  • CIN: Items are not displayed while updating the RG1 Register using T Code:

    Hi Experts,
    Items are not displayed while updating the RG1 Register using T Code: J1I5.
    System is not showing any error message.
    Can any one explain to update the RG1 Register?
    Thanks
    Chandra

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

  • XI: How to update the Message Status (shown by transaction SXMB_MONI  )

    Hi
       My question might be stupid, but I need you help.
    I would like to know how can I update the message status what we see while using trasaction SXMB_MONI  . The Scenrio is, I have a Custom Interface program build on the Abap Proxy interface method called EXECUTE_ASYNCHRONOUS.
    If I am not wrong, transaction SXMB_MONI is on the XI system and also on the SAP Application system. ( But I am not sure in what way the same transaction differ in two systems )
    My issue is,  when I receive the xml data into a structure in abap proxy, I am doing some validation on the received message data. If I found some error in the data , then I need to update the Message status of the SXMB_MONI to  ERROR flag. How to implement this ?   I have not done one before. And I am not sure, if any exception like error message is raised, will it stop the proxy from processing further and update the Message Status and this can be viewed using SXMP_MONI in the SAP application system to be ERROR flag?
    Or is there a BAPI or function module to handle this ?
    Appreciate your help
    David

    Hi
    I am not sure If I had understood you reply. But Would need your help to have a bit more insight to your answer. I am not completely into XI , but I am from ABAP side.
    At the R/3 side , Abap Proxy object geneted has the INTERFACE and its associated  METHOD, in which I am building my own abap code to do any validation on incomming data. But If I want to Raise a Exception, I understand that this Expection has to be first defined .
    But do I have to define a new Z Expection class  or can I just add a exception in the Proxy -Interface-method.
    I have not understood this process.
    All I need to do is, if I find any incomming data error , during my validation at the R/3 side, I need to stop the METHOD processing ( by any means ) and Update the Message Status flag show in SXMB_MONI to Error . 
    What is the trigger  that i can implement in myown code that will update the Message status to Error , from R/3 perspective of using SXMB_MONI.
    Thanks
    David

Maybe you are looking for