Steps to be done by developer in server movement physically

Hi All,
We are moving BW server from one place to another place physically. The basis team is taking care of all movements. As BW developer what are the steps I needs to be done?
Like should we delete all delta queue & data mart status? I need some complete guide lines on this. This is high critical project to our company.
So send me any link or document if you did already.
Thanks in advance.
Arun Thangaraj

As Ajay said, all you should have to do is make sure you're not running batch jobs or loads when the server is brought down. I think it would be prudent to clear the delta queues and have your load cycle finished, but it shouldn't matter, but you never know what might go wrong.
Obviously you need to think about user impacts, letting people know what is going on and when the system won't be available.
If you have enabled some quereis as web services, you may want to make sure you know what might be impacted. It's possible others getdata from your BW from a web service and don't realize it is even coming form BW.
If you send / receive data from other systems, you need to coordinate to make sure none are adversely effected.
If you receive deltas from non R/3 systems, you might want to be sure that they will not have a problem if your BW system is down, e.g. if the BW would be down for more than a day, will the other system accumlate the deltas properly.

Similar Messages

Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

Installed SP 2013 Foundation in my Hyper-V machine
Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsoft.com/en-us/library/office/fp179901%28v=office.15%29.aspx
for self signed certificate
copied those two certificates in my local machine(base machine) D drive
(D:\Cert)
Both VM and base machine are in same domain
Installed VS 2013 in my base machine and create a Provided hosted app with the copied certificates, (For creation i followed the above mentioned URL)
Just created and hit F5 to run in my base machine, but getting this error
Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.
Please help me to resolve this issue, trying to figure out from last 2 days
Thanks in Advance
Arun

Hi Harminder,
This happens because an app has already been deployed and you are deploying it again using the same version.
Resolution:
Open the AppManifest.xml file and change the version.
Vivek Jagga - MCTS SharePoint
SharePointExcellence

Developer Web Server

Is there any documentation on CFs developer web server.
I installed on my machine not having a webserver.
Can I change settings or run mutiple sites.
If not, how do I then disable now that it is installed?
And what would be the best recommendation for a simple webserver for windows7

Woribhabor, I'll address the 3 questions you asked.
1) First know that there is no interface for managing the built-in web server provided in ColdFusion. It's managed instead via XML files. There is some discussion of that in the CF "administration and configuration" manual. For example, in CF9:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd8 .html
There is even more in the available JRun documentation (since JRun underlies CF and the web server is technically the JRun web server).
Finally, there was also an article on configuring it that brings together the key points from both:
http://www.adobe.com/support/coldfusion/adv_development/config_builtin_webserver/index.htm l
To be clear, the built-in web server is not intended to be used for production. Both the installer and these docs clarify that over and over.
2) You ask what would be the "best recommendation for a simple webserver for windows7". It would seem IIS would be your best recommendation, since it's built-into Windows 7 (and Vista and XP).
That said, note that IIS 7 (which is what's built into Windows 7) is only formally supported by CF 9.0.1 (the free Updater 1 for CF 9). While you can try to make IIS 7 work for CF 9.0, or 8 or 7, it takes a fair bit of work, undocumented (though written of by many on various blog sites). If for some reason you could not run CF 9.0.1, and especially if you had any aversion to IIS, others will note of course that you can easily install Apache and use that. Each has their strengths and weaknesses depending on the audience.
3) Finally, you ask how to disabled the built-in web server. That too is done by modifying the appropriate xml file and setting. It's mentioned in the various docs, but perhaps the best single page to point to would be this:
http://www.adobe.com/support/coldfusion/adv_development/config_builtin_webserver/config_bu iltin_webserver03.html
Hope that helps.
/charlie arehart
[email protected]
Providing fast, remote, on-demand troubleshooting services for CF (and CFBuilder)
More at http://www.carehart.org/consulting

HT4623 I just updated my phone to ios6 and it says update completed, just a few ore steps and im done but wont let me go beyond that page when i press continue it just goes back to the ios6 screen "slide to update"???

i just updated my iphone to ios6 and now it wont let me use my phone it says i phone was updated there are just a few more steps then im done but it wont let me get past the first screen it just goes back to the slide to update screen....

If you are absolutely positively sure that the password you are typing in is your Apple ID password, I would try once more to enter the password. Be real careful as you type and make sure that Autocorrect is not changing what you are typing.
If no luck try to proceed without entering the password. If you can get the iPad functional go into
Settings > ITunes and App Store and log in there.
If you can log into to your Apple ID there you will also need to go to
Settings > Messages > Send and Receive and enter or check the email at which you want to receive messages,
Also
Settings > FaceTime > check or enter the email address you want to be reached by FaceTime.

Steps to setting up email for Lion Server Alerts

Can anyone describe the steps to configuring email alerts on Lion Server? I see a place to enter the email address in the Alerts window but no messages ever get emailed.
Is there another setting I need to turn on to get the server to send email?

Hi all,
I arrived to active BI platform in sapnetweaver trial version 7.01, i follow this steps.
1/You need to login to 001 client as SAP* password minisap
2/Create your own user in SU01 transaction and log in with your own user.
3/Then run Administration workbench of BW (RSA1) and create and assign of logical system to your client,
4/replicate DataSources form its own BW system.
It's easy and simple.
Trial version had a limit, when i tried to create a transformation between a datasource an InfoObject i meet some trouble. Log message suggest to install frontend of sap netweaver to resolve this trouble.
This topic is close
Thanks Uday
Kinds Regards.
Souad

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Report back if that doesn't work.

Unable to get changes done in Development to Production

Hi Gurus,
I have successfully transported Bex Query from BID to BIP system. Now I made some changes in the Bex Query in BID and transported to BIP But I am unable to get changes done in Development to Production.
Regards
Amit Srivastava

Hi Amit,
Its because package infomation of new objects that are used in bex query are local object($tmp). For this reason, althouh you are getting a request via rsa1 and doing some changes in bex query, only the objects which are has different package from $ tmp, written into request.
For the solution, you need to go rsa1 and transport connection, select your bex query then select 'only necessary objects', then transport this request.

With PSE 12, is there a magic trick for repeating editing steps that were done on one photo to another?

With PSE 12, is there a magic trick for repeating editing steps that were done on one photo to another?

No magic, sorry...
If you are able to achieve your goal by using adjustment layers, you can save the first picture in psd or tiff format to keep the layers. If you have a new file needing the same adjustments, have both pictures open and copy the adjustments layers to the new file.
But the best solution, by far, is to edit in the ACR module. You can use it not only for raw files, but also with jpegs, psd or tiffs. Edit the first picture, then when editing the following one, choose 'previous version' from the menu icon on the right of the 'basic' tab.

Want to Take Backup Of Programs Done in ECC6 IDES Server

Hi Experts,
Want to Take Backup Of Programs Done in ECC6 IDES Server like, Fico related Company Code,Configuration.... Abap Realted Programs....I Did my Practice in client 800 in IDES ECC6.
My Moto, Here is to Format the old server and Install new server, where as I can Move the same Fico related Company Code,Configuration.... Abap Realted Programs. from old server Backup to the new Freshly installed server.
I tried to move through request, but here only Abap programs are only Possible .
Please Suggest me the Path To proceed...
Thanks In Advance...
Amit.

If you planing to build the same system.. why you trying to uninstall & install..
anyways you can do a client export & then restore of that 800 client.
or DB backup & restore iis more recommended.
Make sure you arnot changing any drives are file system , it makes the process would be smooth for DB restore & Backup.
-rahul

Steps need to done after upgradation is done

Hi Everybody
I have a question , If I want to upgrade my sap version , What are the post up gradation steps to be done ? what need to be done for ECATT and Workflow ,? Since, we create them , like in Ecatt we create scripts of our own .
Please respond soon .
Thanks
Bharathi

Hi,
Have you moved the database or the application as well? This sounds like a cloning / autoconfig issue, but it depends on what you have done so far.
Kind Regards,
Steve

HT1694 I need toi sync my personal Outlook calendar to my iPhone 5, can this be done with a non-server system?

I need toi sync my personal Outlook calendar to my iPhone 5, can this be done with a non-server system?

You're welcome.
Have you never synced your iPhone with iTunes on your computer to transfer music and any other iTunes content from your iTunes library on your computer, or to transfer photos from your computer to your iPhone, etc.?
What I'm referring to is your iPhone sync preferences with iTunes on your computer, not any setting on your iPhone.

What is Informatica OEM Powercenter ETL Server for Physical Server

Hi expert
What is Informatica OEM Powercenter ETL Server for Physical Server. And For which OEM is stands for.
Thanks in advance
Regards
Frnds

It looks like it is the name Oracle has given to the Informatica Powercenter product delivered with OBIA 7.9.5:
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
OEM should stand for the Original Equipment Manufacture distribution model Oracle is employing to bundle the Informatica developed product.

I have purchased my first smart phone. iphone 5. I want to use sounds sent to me in text messages as ringtones but don't know how to move them over. Any help would be appreciated.

I have purchased my first smart phone, an iphone 5. I would like to use some of the sounds from text messages for ringtones but don't know how to move them over. Any help would be appericated.

I'm sorry, had you already pointed out the rules which stated that lines from 2 separate accounts were eligible??? I don't see anywhere in the advertisement specifically stating that lines from 2 separate accounts would be eligible, so THAT is not what's advertised, either.
As far as I know Verizon's BOGO offers have ALWAYS been for lines on the same account. Possibly someone could chime in where they have received this offer on 2 separate accounts? The ONLY exception to this was someone getting the offer with 2 eligible lines on their account, reactivating the old phone on one of the lines and then giving one of the new phones to someone on another account.
Sorry if you think simply because someone disagrees with you, they are being condescending. That is certainly not the case. Good luck.

My scrollbar unexpectedly has moved to the left side of the screen (only in Firefox), and I don't know how to move it back

my scrollbar has unexpected moved to the left side of the screen in stead of the right side, and I don't know how to move it back. This only occurs in Firefox.

Set the pref layout.scrollbar.side to ''2'' to place the scroll bar at the right side.
See:
* http://kb.mozillazine.org/layout.scrollbar.side (default is 0: user interface)

HT1657 If you don't watch a rented movie do you get your money back

If you don't watch a rented movie do you get your money back

No, no more than you would get your money back from Blockbuster if you rent a DVD from them but don't watch it.
Regards.

Steps to be done by developer in server movement physically

Similar Messages

Maybe you are looking for