Steps to configure solman to approve support packs

I have installed a Solution Manager System.
What are teh steps to be done to connect the SOLMAN system to SAP, so that i can login to SOLMAN to approve Support packs.

Hi Balaji,
             First you have to add the solution in the solution manager you can do
              that by transaction 'DSWP' .Then go to transaction smsy and add the
               R/3 systems which you have installed. In this transaction smsy,you
               have to add the server and the database by giving the necessary details
              then it will automatically creates the necessary rfc's.
              After doing this you have to go to Transaction 'SOLUTION_MANAGER'
              then click on the change management. Then go to maintainance
              optimizer. Here it will ask u which solution and then for which system u
               want to update.
              Revert back if you any queries.
Reward points if helpfull.
Regards,
Vamshi.

Similar Messages

Setup SM 4.0 to allow me to approve support packs/stacks for download

I need a doc or a procedure to setup Solution Manager for approving support packs/stacks for download. I havn't had much luck finding a good one.

Have you configured Maintenance Optimizer , if not use the following link to see the documentation for configuring MOPZ
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689877&
From the above link click on <b>SAP Tutor on Maintenance Optimizer</b> this will show you how to use Maintenance optimizer and <b>Step by Step Configuration of Maintenance Optimizer SP Stack 09</b> will help you to configure Maintenance Optimizer. ( scroll down to bottom to see the links)
Thanks
Prince Jose

Applying support packs in ECC6.0 through solution manager

Hi,
Can you explain me how we can configure to apply a support pack in ECC 6.0 (Dev, Quality & Production) through solution manager.
For that 4.0 is enough or it should be upgraded to 7.0

Mohammed,
1. First, You have to configure Maintenance Optimizer in Solution Manager.
2. Then create the systems in SMSY.
3. Finally create solution for each system in DSWP, Apply support packages to the systems ECC6.0(DEV, QAS and PRD).
Refer these threads:
    Configure Manintainance optimizer
    UPGRADE SESSIONS: What's SAP Solution Manager Maitenance Optimizer?
These SAP tutors explain in detail(Step by Step)
    https://websmp209.sap-ag.de/~sapidb/011000358700000086852008E.sim
    https://websmp209.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if you still need any help
Regards,
Sanjai

MIDDLEWARE ( R/3 Plugin support pack details)

Hi Experts,
We have to integrate CRM5.0 with R/3 4.7. Can anybody tell me the version of the PI( plug-in) support package, which has to be installed at R/3.
Points will be rewarded.
Thanks in advance
Nadh.

Hi Eric,
Thanks for your support.
I have gone through the SAP note 672651 - OCS: Known problems with Support Packages in Basis Rel.6.40 and did a analysis of steps to install BW 3.5 support packs
1.Logon to client 000 with superuser having full authorisaton (i.e SAP_ALL and SAP_NEW)
2.Update SPAM/SAINT Version
3.Install PI_Basis 2005_1_640 with SAINT tcode
4.Install SAP_BASIS support packs with SPAM
SAPKB64013---SAPKB64014
SAPKB64015---SAPKB64018
SAPKB64019---SAPKB64021
5.Install SAP_ABA support packs with SPAM
SAPKA64013---SAPKA64014
SAPKA64015---SAPKA64018
SAPKA64019---SAPKA64021
6.Install PI_Basis 2006_1_640 with SAINT
7.Install SAP_BW Support packs
SAPKW35013---SAPKW35014
SAPKW35015---SAPKW35018
SAPKW35019---SAPKW35021
Our BW 3.5 system is having SAP_Basis SAPKB64012 as current level and SAP_BW SAPKW35012
as current level.
Please let me know is the queue defined for Basis,ABAP and BW Supports packs is ok.
Regards,
Anil.

How to configure the database monitoring (DBA Cockpit) after Support pack

Hi,
I did the Support Pack Upgrade for BW system and i ran SGEN as well, now i need to configure the database , could you please suggest how to configure the database monitoring (DBA Cockpit) after Support Pack Upgrade.
Server is MSSQL , Component is SAP NetWeaver 2004s and OS is Windows NT.
Plesae suggest.
Chandu.

Hi,
You are right. SAP delivers this functionality from SP-12. So when you have applied the SP-12, you must have done these config steps to enable the DBA Cockpit.
If you have done these steps earlier, So you must have DBA Cockpit enable right now and putting extra SPs like 13, 14 and so on, should not be a matter.
Now if you have not performed those config steps before, Please do them now and you will be able to use DBA cockpit.
Please understand that SP12 is the base to run DBA Cockpit.
With Regards,
Saurabh

Steps to configure BPM report from Solman 7.00 for productive system ECC6.0

Hi all,
Please given me the steps to configure Buisness process Monitoring reports from Solman 7.0 for productive system( ECC6.0, windows & database oracle 10.2),
I wanted to create the Reports of monitoring the buisness.
Regards,
Akash Basis consultant.

Thanks for replying Volker von Gloeden,
This thread is my first one in SDN & I am very glad that someone has given the answer ,
I will take a look for solution you have provided & will inform you.
Thanks again.

Basic Configuration and Support Pack Stacks

Hi everyone,
Just a general question about the Solution Manager 7 "basic configuration" stuff.
Are you required to perform the "Basic Configuration" everytime after you apply a new support pack stack to solution manager?
Or is it a one off, after the initial installation?
Cheers
Shaun

Hello,
https://websmp109.sap-ag.de/~sapidb/011000358700001927282008E has some information about your question.
Only some parts of SOLMAN_SETUP must be run everytime, other parts are optional. For an overview please visit the link.
Best regards,
Miguel Ariñ

Upgrade/Support Pack Cut Over Steps

Hi Experts,
Please suggest Cutover Steps performed upgrade/Support Pack at each time we update the system along with things like custom programs that are copied from standard programs which need to be reviewed Etc.
Thanks in Advance
Hari

Hi.
You should read a corresponding Support Package Stack Guide. Guide can be found at SAP Service Marketplace at [http://service.sap.com/maintenanceNW70].
Best regards,
Aliaksandr

SPAM/SAINT support packs.

Hello,
I am updating SPAM?SAINT from 700/0023 to 700/0030. I have found the Support Pack version in Service Market place and when I did click Download it does not show up in my Download manager.
Is it because all these can only be downloaded from Solution Manager?
How do I go find the Spam/Saint Update in Solution Manager? I could not find it. Like we have the additional components in service market place, do we also have some kind of a tab in SOlman ?
Thanks
Druva

Druva,
>When I open the .sim file for Maintenance Optimizer in step 5 it says" enter the Maintenance ERP >system Date and then press enter". What does it actually mean.
Sorry but when I have approved SP downloads with SOLMAN, I had no .sim file to deal with.
So, I don't have an answer....
I just put my SPs in my download basket, then I go in SOLMAN in solution_manager transaction where I choose whatever solution we have (there is no control, I can approve CRM SPs with an BI solution...). Then When I use Download manager, I see all the approved SPs.
Regards,
Olivier

SB Audigy Series Support Pack 5.3 (02/24/2015)

This software/driver pack is unofficial, not supported by Creative Labs.
Use it at your own risk.
Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
- Audigy 5/RX
For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
Operating systems supported:
32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
Included in the pack:
- Audigy series driver 3.01.0039 (Windows Vista or later) (**)
- Audigy series driver 2.09.0016 (Windows XP)
- ALchemy 1.45.03
- Audio Console 1.41.00
- DDL and DTS Connect License Activation 1.00.04 (*)
- Dolby Digital Live Pack 3.03.08 (*)
- EAX Console 3.00.60 (Windows Vista or later)
- EAX Console 3.00.59 (Windows XP only)
- Feature Mode Selection Utility 2.10.07
- Graphic Equalizer 2.10.01
- MediaSource DVD-Audio Player 2.00.78 (***)
- SoundFont Bank Manager 3.21.02
- Speaker Calibrator 1.60.14 (Windows XP only)
- Speaker Settings 2.10.05 (Windows Vista or later)
- Speaker Settings 2.10.04 (Windows XP only)
- Surround Mixer 4.00.76 (Windows XP only)
- THX Setup Console 2.20.08 (Windows XP only)
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
(**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
(***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
Does this driver improve sound quality or performance Are there any tweaks ?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
Fixes and improvements:
- Fixed Audigy 5/RX support.
- Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
- Fixed driver installation issues on Windows 10.
- Fixed Audigy "1" or Audigy 2 mute issue.
- Audigy RX is now fully supported.
- EAX Console now works on Windows Vista or later.
- Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
- Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
- Added instructions on how to install the Gameport.
- Fixed missing speaker settings strings on Windows XP when DDL is enabled.
- Improved driver installation, less confirmation prompts.
- Improved setup procedure and scripts.
- Removed Encode switcher for now, only DDL is available.
- Installation now customizable, select what you want to install.
- New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
- CMSS2 is now available.
- OpenAL 64-bit support.
- Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
- Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
- Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
- Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
- EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
- Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
Undocumented fixes by Creative (not listed in the release notes):
- Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
- Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
Release Notes:
IMPORTANT: Driver uninstall on Windows Vista or later
The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
HOW TO INSTALL THE GAMEPORT DRIVER
You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
Just follow the steps shown in the screenshots.
WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
- Configure all settings and shutdown. Your settings will be saved.
- This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
- On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
OpenAL 2D benchmark in RightMark 3DSound crashes your system
The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
No problem With 62 or fewer buffers.
OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
- install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
Karaoke effects make the audio play in mono
You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
Optionally, follow the steps below.
Open EAX Settings, select a Karaoke effect, then click the Edit button.
Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
Repeat the steps for all Karaoke effects.
These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows XP or later
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows Vista or later
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Equalizer and EAX effects are not available when using OpenAL or ALchemy
Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
There is no sound in games with OpenAL support
Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
Equalizer settings are not applied after using OpenAL or ALchemy
After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are lost when speaker configuration is changed
Bass and treble settings reset to their default values when speaker configuration is changed.
Download:
Filename: Audigy_SupportPack_5_3.exe
File size: 120 MB
CRC32 hash: 76110093
SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
Mirrors: Google Drive
All files are property of Creative Technology Ltd, unless otherwise noted.

Originally Posted by Dave_
Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
Anyway, I have a suggestion.
Run EndPtUtl.exe found in the Audio Console installation folder.
If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
EndPtUtl.exe enables the use of any device for outputting encoded audio.

INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name   ...........-HP
System Manufacturer    Hewlett-Packard
System Model    HP ProBook 4530s
System Type    x64-based PC
Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version    2.6
Windows Directory    C:\windows
System Directory    C:\windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    ...........-HP\................
Time Zone    South Africa Standard Time
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.94 GB
Available Physical Memory    1.00 GB
Total Virtual Memory    7.87 GB
Available Virtual Memory    1.25 GB
Page File Space    3.94 GB
Page File    C:\pagefile.sys

To clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK

Import Support pack in Portal system with ESS & NWDI.

Hi ,
NW Portal system has the current support pack level of JAVA stack 11 which includes ESS business backages SAP_ESS 603 SP1, BP_ERP5***,BP_ERP5COM,BP_ERP5ESS, BP_ERP5HRA, BP_ERP5PSS 1.0 SP12. We are using NWDS for doing some customizing the ESS portal iViews configuration and transporting through NWDI tracks.
If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
Thanks
John

John,
If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
JSPM only
At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
May be you want to trigger data push manually once from all system to make sure if everything is working fine , other than this nothing
As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
Its good to go with latest , but to be in sync with ECC you can continue with 7.0.
Regards,

Web AS 6.4 Support Pack upgrade from stack 9 to stack 10

Hi,
Did any one apply support pack from stack 9 to stack 10 for Web AS 6.4, which installed on windows 2003 and Oracle 9.2?
I got error on step 9 over 19 steps, MUT-02041. In callSdmViaSapinst.log, I found following:
Apr 19, 2005 3:21:39 PM Info: SDM configuration: Do not determine state of J2EE Engine now.
Apr 19, 2005 3:21:39 PM Info: SDM configuration: Do not save/restore state of J2EE Engine now.
Apr 19, 2005 3:21:39 PM Info: Error handling strategy: OnErrorStop
Apr 19, 2005 3:21:39 PM Info: Update strategy: UpdateLowerVersions
Apr 19, 2005 3:21:39 PM Info: Starting: Update: Selected development component 'keystore'/'sap.com'/'SAP AG'/'6.4010.00.0000.20041222145329.0000' updates currently deployed development component 'keystore'/'sap.com'/'SAP AG'/'6.4009.00.0000.20041117092012.0000'.
Apr 19, 2005 3:21:39 PM Info: SDA to be deployed: D:\usr\sap\VDT\JC00\SDM\root\origin\sap.com\keystore\SAP AG\6.4010.00.0000.20041222145329.0000\keystore.sda
Apr 19, 2005 3:21:39 PM Info: Software type of SDA: primary-service
Apr 19, 2005 3:21:39 PM Info: ***** Begin of SAP J2EE Engine Offline Deployment (Service component of SAP J2EE Engine) *****
Apr 19, 2005 3:21:40 PM Info: ***** End of SAP J2EE Engine Offline Deployment (Service component of SAP J2EE Engine) *****
Apr 19, 2005 3:21:40 PM Error: Aborted: development component 'keystore'/'sap.com'/'SAP AG'/'6.4010.00.0000.20041222145329.0000':
Caught exception during deployment from SAP J2EE Engine's offline deploy API:
com.sap.engine.tools.offlinedeploy.rdb.ODeploymentException: WARNING: Can't deploy component with sda D:\usr\sap\VDT\JC00\SDM\root\origin\sap.com\keystore\SAP AG\6.4010.00.0000.20041222145329.0000\keystore.sda
com.sap.engine.lib.io.hash.CorruptedHashException
at com.sap.engine.lib.io.hash.IndexUtils.verifyCRC(IndexUtils.java:73)
at com.sap.engine.lib.io.hash.MultipleHash.decodeFromByteArray(MultipleHash.java:73)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineOfflineDeployerImpl.performAction(DeploymentActionTypes).ODEXC)
Apr 19, 2005 3:21:40 PM Info: -
Deployment was successful -
Apr 19, 2005 3:21:40 PM Info: Summarizing the deployment results:
Apr 19, 2005 3:21:40 PM Error: Admitted: D:\J2EE-RUNT-CD\J2EE-ENG\OFFLINE\SAPJEECOR10_0.SCA
Apr 19, 2005 3:21:40 PM Error: Admitted: D:\J2EE-RUNT-CD\J2EE-ENG\OFFLINE\JRFC.SDA
Apr 19, 2005 3:21:40 PM Error: Processing error. Return code: 4
Anybody has a clue how to solve it? Thanks in advance!!

solved it myself. Re-install J2EE, and re-apply patch again. Everything is good now.

Downloading and installing a support pack

Hi,
I was wondering how I can download and install BI support pack 11 GUI 15?

Hi David,
Do you have your Satellite system configured in SMSY? Are you getting EWA reports generated under transaction DSWP for this satellite system in question? If so, then you are connected to SOLMAN. You can also do RFC testing via either transaction SMSY or SM59 or SDCCN within SOLMAN or the Satellite system.
Hope this helps.
Thanks,
Mark

Help understanding support packs

Hello,
We have been asked to help in applying support packs accross our SAP enviornment. We are currently running
ECC, BI, SRM, PI/XI, solman (and portals, but thats just Java).
I have in the past implemented support packs, however, its been a while. I took a look at the systems to see whats in SPAM (current release), and
have found a TON of components listed there:
i.e. in our ECC6 system, they have, SAP_ABA, SAP_BASIS, SAP_BW, SAP_AP, SAP_APPL (which I belive are the ones we need)... they also have a lot of
components listed (such as: EA-IPPE, EA-FINSERV, EA-PS, IS-M, IS-OIL, LSOFE, and so on... the list goes on (about 40 components). Some components (such
as SAP_BW are listed in SPAM... even though its a ECC6 system (not bi).
My questions are:
1. Is there a way that I could determine what we acctually need?
2. What are the minimum components we need to update?
3. Do we also update SAP_BI in ECC, or XI (these are listed in spam)?
4. Are there any dependancies? i.e. should we update j2ee w/ any support stacks we update? or are there any components that
need to be updated (I know we do spam/saint), but Im still not able to find a step by step guide...
This will be the first time we run this since our upgraid, so any tips and help would be appriciated.
Thank you everyone!
Richard

Hi Richard,
Is there an easy way to determine what support stack we are currently on?
To answer the above question,
From any SAP screen go to sytem->status and click on the magnifying glass button just below
component version, under system data.
This should give the list of componets and their support pack level.
In service market place, for ECC 6, follow the below path to find the necessary support packs,
My Company's Application Components->SAP ERP->SAP ERP 6.0->Entry by Component->SAP ECC Server
EHP4 is the latest enhancement package, however the support pack level is higher than 17.
For example for basis component, it is currently at 21.
An Enhancement package is different from support pack
http://wiki.sdn.sap.com/wiki/display/BBA/TheOptimizePhase
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a06c2c0b-490a-2c10-62ba-9d0ee06b610f?quicklink=index&overridelayout=true
See if the above links help you.
Regards,
Vishnu

Steps to configure solman to approve support packs

Similar Messages

Maybe you are looking for