Steps to create SCD1 and SCD2 in OWB

Hi experts ,
PLesae tell me the steps to create SCD1 and SCD2 in OWB.
Thanks and regards
Sunil

Sunil,
This forum meant for Oracle BI Suite Enterprise Edition and not for OWB ETL tool.
But if you want steps of creating SCD2 specify your email id I will send you the doc for SCD implementation.
Regards,
Amrita

Similar Messages

Steps to create workbook and need to insert 10 query's in the workbook

Hi,
Please let me know Steps to create workbook and need to insert 10 query's in the workbook.
Thanks,
rajesh b

Hi,
Creating Workbook ---> Open your query --> save it as a new workbook -->provide description for workbook -->If you want more queries into the same workbook then insert related queries into different different sheets by insert query from Tools menu .
Regards
Pcrao.

Steps to create Multiprovider and infosets..

Hi gurus,
Can anyone post me steps to create multiprovider and infosets..
Points will be awarded.
Thanks in advance,
Venkatesh

A MultiProvider is a type of InfoProvider that combines data from a number of InfoProviders and makes it available for analysis purposes.
The MultiProviders itself does not contain any data. Its data comes entirely from the InfoProviders on which it is based. MultiProviders only exist as a logical definition. These InfoProviders are connected to one another by a union operation.
One can combine InfoCube, ODS objects, InfoObjects and InfoSets in a MultiProvider.
A union operation is used to combine the data from these objects into a MultiProvider.
Here, the system constructs the union set of the data sets involved. In other words, all values of these data sets are combined.
InfoSets allows reporting on several InfoProviders by using combinations of InfoObjects (master data-bearing characteristics) and ODS objects via a join condition.
An InfoSet can have following join conditions
Inner Join
Left Outer Join
Inner join and left outer join are only different in the situation where one of the involved tables does not contain any suitable record which meets the join conditions.
steps for creatin multiprovider.
Step1: Enter Transaction RSA1. Right Click on Infoarea and select u2018Create MultiProvideru2019. Provide technical name and description for the MultiProvider.
Step2: Select Data Targets (InfoCube, ODS and InfoObject or Infosets) on which MultiProvider should be based.
Step3: Select the Characteristics which should be part of the MultiProvider design.
Step4: Select Time Characteristics and Key figures.
Step5: Create dimensions and assign the characteristics to the dimensions.
Step6: Identify the characteristics, time characteristics and key figures in u2018Identificationu2019 tab.
Step7: Save and Activate the MultiProvider.
steps for creating infoset.
Step1: Enter Transaction RSA1. Right Click on InfoArea and select u2018Create InfoSetu2019. Provide technical name and description for the InfoSet.
Step2: Choose ODS or InfoObject on which you want to build InfoSet.
Step3: Select the characteristics/key figures required in InfoSet design and join the common characteristics via Inner or Left Outer Join.
Step 4: Save and Activate InfoSet.
hope this helps you in creating them...

Steps to create grid and overlay

I am trying to     (1) make my blank page/file in landscape mode,
                            (2) create a grid that I can resize so it looks like very small graph paper,
                         (3) insert a text box, type text and then reverse the image so that the grid/graph lines show inside the letters (as if the letters have a pattern on top of them)
Can anyone outline the steps for me?
Thank you!

danam
Thanks for the follow up.
Since your program is Adobe Photoshop Elements 10 Mac, please re-post your question in the Adobe Photoshop Elements Forum (photo editing).
Photoshop Elements
or wait for a moderator to see your thread here and move it from here to there.
Somehow your thread got posted in the Adobe Premiere Elements Forum (video editing).
You should get great advice in the Adobe Photoshop Elements Forum. If somehow your thread is not answered, please let me know and I will put on my Photoshop Elements hat and see what I can do with those questions. I am strictly an Elements Windows user, but we will give your Photoshop Elements 10 Mac questions a try if needed.
Best wishes
ATR

Need steps to create: Users, and then allocate authorization profiles.

Hello,
I have set up release procedures using a how to doc which was posted an sap123.com. It doesnt go through how to do this, only gives a screen shot. The SAP environment is a test environment for training. We have maybe 4 users existing in system. I would like to know how to first create a user, then go through PFCG and create and allocate authorization profiles. They need to be able to approve PR's/ PO's using the two release codes and release groups I have set up. The steps I followed are posted here: http://www.sap123.com/showthread.php?t=59.
Thanks for any help.

Thanks. I do have authorization to create users/ roles & such. I have created 3 specifically to test the workflow I am trying to set up that contains release procedures.
In PFCG - I created a new role MATMGT. On the Menu tab, Assign Transactions screen, could someone please tell me what the Transaction Code would be so that, when I goto the Authorizations tab and click on the Change Authorization Data button, I get a "Materials Management: Purchasing" row displayed in the Change Role: Authorizations screen. I am following http://www.sap123.com/showthread.php?t=59 - and am stuck at the "Create and allocate authorisation profiles" section, as there are no steps detailing the usage of PFCG.

Basic step-by-step to create pinch and zoom articles for the ipad?

Hi all,
I'm new to Adobe's Digital Publishing Suite. I'm converting a print publication into an ipad app for my employer.
I've selected PDF in the "Default Image Format" when creating a new folio in Folio Builder. And ticked the PDF pinch and zoom box in viewer builder.
However, I'm unable to get the pinch and zoom to work. Instead of zooming, a magnifying glass with a line through it pops up.
Could it have something to do with the Indesign file's dimensions versus the dimesions set in Viewer Builder? I've tested multiple sizes for both, yet
I'm unable to find what the trick is... Any help would be greatly appreciated. Thanks!

I'm seeing the same problem on my end. I select PDF as the image format when I upload the folio, but when I view it on the iPad the text looks pretty shoddy and I can't pinch and zoom. I really don't care about the pinch-n-zoom so much, as I do with getting a better quality rendering of my text.
I don't have smooth scrolling selected.
Nevermind - I see what the problem was.
I had a single page folio, that was set to smooth scrolling as a defaul in the Folio Producer and it would not allow me to change it. I added a second page to the folio, and suddenly I could turn smooth scrolling off. Problem solved I guess?
I'm sill not very happy with the way fonts are rendered on the iPad. Maybe it will look better once the iPad3 with retina display is released.

Steps to create ess/mss applications in hr abap

Hi guys,
Could you please let me know the steps to create ess and mss applications in HR ABAP.
I want some tutorial with detailed steps of creating these applications.
Thanks
Aditya
Moderator message - Please search before asing and then ask a specific question - post locked
Edited by: Rob Burbank on Jun 19, 2009 11:51 AM

HR Renewal 2.0 FP1 Available
Employee Self-Service (SAPUI5) - SAP Library
Employee Self-Service on SAPUI5 (New)- HCM_ESS_UI5_1/EHP7

Creating streams and sensor data hub

Hi all,
I am working on the Getting Started example from OTN ( "HandsOnSession.pdf" )
and in the step to create stream and sensor data hub, am having a problem.
I am working with the Standalone SES v10.1.2 running on a Linux OS.
While running this command at the Linux Terminal,
sqlplus system/welcome1@orcl
I get a -bash: sqlplus command not found error
I am in the <filepath>/edge/sql $ when I execute it.But I observed that my Oracle edge server install folder doesnot have a sqlplus folder which I think is by default installed in the Oracle_Home folder. There is a sqlj folder though , but am not familiar much with sqlj.
Could anyone advise on how to connect to the database and create he SDH tables.
Also in the sqlplus system/welcome1@orcl command, could anyone confirm if the syntax is as below,
sqlplus <username>/<password>@orcl
where
<username> = username used to install the Edge server install
<password> = password used to install the Edge server install
would appreciate your response,
Thanks,
Vijay

Hi Vijay!
The EdgeServer doesn't have a full Oracle installation. Therefore a client tool such as sqlplus is not present. Install a Oracle Database on this machine (as I suspect you do not have a database yet) and use the sqlplus it comes with.
cu
Andreas

Cannot find object after creating dimension and cube.

I need to develop a project using olap api to get olap data.
My db release is 10.1.0.2, owb is 10.1.0.4.
After i create dimension and cube in owb, I cannot find any object i have created in owb. Except that in OEM, after i click the button dimension, there comes an message as that the dimension does not have complete metadata or was created by old release and OEM will create a metadata for it. After that, I can find the dimension in AWM and get the imformation using olap api.
However, there is no measure button in OEM, I cannot find the measures in measure folder. So that i cannot get the information of the MdmMeasureDimension using olap api.
Can somebody help me with this issue? Thanks!

With OWB 10.1 and prior releases to get OLAP metadata for a dimension or cube you must have used the OWB transfer wizard to deploy the OLAP metadata. This bridge basically creates and executes a script with all of the CWM calls to create the OLAP dimension and cube metadata.
When you deployed the dimension from OWB in 10.1 it only created the 'create dimension DDL' for the object.
Cheers
David

How to create pdf and html usin oracle policy automation with steps.

Hi,
I tried to create pdf report.But they have some problem for while creating xslt.
Pls provide more steps or simple example creating xslt and which xml use for that also.

Below is a working (OPA 10.1) example, which I found earlier in this forum. You can call it from a document control on the summary screen. The xml is provided by the server containing all attributes with a public name.
<?xml version="1.0" encoding="iso-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                xmlns:fo="http://www.w3.org/1999/XSL/Format"
                xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:output method="xml" indent="yes" encoding="utf-8"/>
<xsl:template match="/">
<fo:root>
<fo:layout-master-set>
    <fo:simple-page-master master-name="my-page">
      <fo:region-body margin="1in"/>
    </fo:simple-page-master>
</fo:layout-master-set>
<fo:page-sequence master-reference="my-page">
    <fo:flow flow-name="xsl-region-body">
      <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="solid">
        <xsl:apply-templates mode="dump" select="/session"/>
      </fo:block>
    </fo:flow>
</fo:page-sequence>
</fo:root>
</xsl:template>
<xsl:template match="*" mode="dump" priority="100">
            <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="solid">
                Node:
                <xsl:value-of select="name()"/>
                <xsl:if test="count(@*) > 0">
                    <fo:block margin-left="1cm">
                        Attributes:
                        <xsl:for-each select="@*">
                            <fo:block><xsl:value-of select="name()"/>=<xsl:value-of select="."/></fo:block>
                        </xsl:for-each>
                    </fo:block>
                </xsl:if>
                <xsl:if test="string-length(normalize-space(text())) > 0">
                    <fo:block>Text Value: "<xsl:value-of select="text()"/>"</fo:block>
                </xsl:if>
                <xsl:apply-templates mode="dump" select="*"/>
            </fo:block>
    </xsl:template>
</xsl:stylesheet>

HT4914 if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded t

if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded to iTunes match?

Welcome to the Apple Community.
iTunes match won't automatically remove content from your computer, if you want to do that you will need to do it manually yourself.

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

Greetings anabeqiri,
Thank you for contributing to the Apple Support Communities.
The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
All the best,
Jeremy

Steps to create and assign new cost centers?

Dear all,
Pls share with me the steps to create and assign new cost centers.
TIA
kogi

Refer to the following link, will help you with the cost Center creation.
http://help.sap.com/saphelp_470/helpdata/en/08/5145cc43b511d182b30000e829fbfe/frameset.htm
It is actually the job of Fi consultants.
Post your e-mail ID I will send some documentation.
Regards
AK
Reward points if helpful

Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4

Hi Guys,
Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4.I'm running the installer from a local drive and also noticed that the uninstaller files are not created.The installer process has been running for 4+ hours.
Any suggestions/tips?
Thanks
Manoj

hi John,
we left the installer running overnight, but the install process has still not completed.Also it has not created any uninstaller files under the following directory:
E:\APPS\Hyperion\uninstall
what could be the reason for that?
Thanks.
Manoj

Steps to create SCD1 and SCD2 in OWB

Similar Messages

Maybe you are looking for