Steps to create and assign new cost centers?

Dear all,
Pls share with me the steps to create and assign new cost centers.
TIA
kogi

Refer to the following link, will help you with the cost Center creation.
http://help.sap.com/saphelp_470/helpdata/en/08/5145cc43b511d182b30000e829fbfe/frameset.htm
It is actually the job of Fi consultants.
Post your e-mail ID I will send some documentation.
Regards
AK
Reward points if helpful

Similar Messages

Create and assign new user in SRM org struct when HR Distribution is active

Hello experts,
In SRM HR Distribution list is active.
Now requirement is we want to create new user in SRM and assign it with the SRM Org structure.
1.)Do i need to create a user in SRM and in ECC HR i mean in both the system or in ECC-HR only.?
2.)When user is there in ECC-HR system then how i can assign user to SRM Org structure. Is there any FM or Standarrd Program ?
Thanks!!
Sunny

Hello Sunny,
As you mentioned HR distribution is active hence you need to create the user in ECC environment and assign it to the org. structure in ECC.
Again there would be few user which you would create in SRM evironment and those would be administator specific.
Activating pointers for HRMD_ABA message allows to replicate all changes made to the organizational structure in HR to SRM.
Changes in HR structure include modifications (add/modify/delete) in the following:
u2022 Organizations
u2022 Jobs
u2022 Positions
u2022 Employees
A change in the relationship of any of the elements above will also be replicated to SRM. For instance, an employee changing units will be reflected in SRM.
Pre-requisite: SU01D ID should exist prior to replicating the concerned user in SRM.
Thanks,
Yatin

Master Cost Centre - create and assign (steps required)

Hi All,
I am currently working on a IDES system. I want to create and assign Master Cost Centre. Please help me in providing the steps to create and assign the same.
Regards,
Chinmay

Hi Chinmay,
Cost Center creation is done by FI Team as that comes under FI module and lot of the other things need to be done. If you just want to create Cost Center you can go to
Financials -> Controlling (CO) -> Cost Center Accounting -> Master Data -> Cost Centers -> Create Cost Centers
Tcode for Creating Cost Center is KS01 and for changing KS02
You also need to Activate Cost Center Accounting in Controlling Area
Financials -> Controlling (CO) -> Cost Center Accounting -> Activate Cost Center Accounting in Controlling Area table V_TKA01_GD
For assigning cost center to employee, you can assign it in IT0001 whihc is the master cost center and IT0027 where you can assign overriding cost center
Hope the information will be helpful
guds

Create New Cost centers in HR Module

Dear friends,
i wan't to create new cost centers in SAP
we have different Profiles in our company like GSM,WLN,CDMA,WLNGSM,CDMAWLN,GSM+WLN etc and that in differernt locations
i wan't to create cost centers so that any new employee created should fall under some Cost center.
thanks

Hi,
A small correction to your understanding.
If you go to PO13 and assign the Cost Distribution, it means --> you are assing the cost center to the 'Position', but not to the employee.
Now, while Hiring an employee.. you will be giving above "Position" (which is already assigned with Cost Distribution).. The cost center for the position will become Master Cost center for the employee.
Example
Lets say you have a cost center assigned to the Position and it was your Master Cost Center.
Now If you assign one more Cost Center by using IT0027 in PA30... It becomes your Master Cost Center but not the one assigned to the Position.
Have a good day...!
KK

Assignment of cost centers and profit centers

Hi Friends,
can anybody give me a series of steps of assignment of cost centers and profit centers, like I know there is a T.code 3KEH, but I really dont know the chronological (step by step) order of steps to be followed to assign the cost centers to profit centers, as profit centers cannot be directly posted to and as the postings.
And above all when I see the info about 3KEH, it says we need to assign only balance sheet items there and not cost items.
Basically I've not studied Profit center accounting Properly and so I'm facing this problme
If there is any documentation on this can anyone pass this on to: kiransandhyaATyahooDOTcom
regards
sandhya

Hi Sridhar,
Thnx for replying. I've gone ahead and defined cost and profit centers and did what you have told me to. Now this is where I'm stranded. How do I map profit and cost centers so that the we get the right kind of reports.
Basically, my question would be: say for eg: if we are defining Company, Co.Code, before completing with Global paramters, there are a series of steps that we need to complete, right.
Like wise, I just wanted to have a series of mandatory steps that I need to follow where the cost centers and profit centers mapping is done, atleast if I have the steps with me then I can go ahead and check the logic as to why should I define a particular step.
Like I mentioned I happened to see some information about 3KEI, so before going to 3KEI or 3KEH, are there any other steps that I need to follow.
I need to get the cost center and profit center reports, so that is what I'm looking for, and what do i need to configure, before getting to that point?
I dont have a great insight into PCA, and I was not a part of the controlling configuration, but because a person has left in between the project, I'm supposed to do this and that is the reason why I dont have much time in doing R&D, and thats the whole reason why I'm seeking inputs which would actually minimise my time of R&D, once I'm able to convince my people, then again I can sit back and try to improvise my self.
regards
sandhya

Can I change two devices of my Id and assign new id's and still access the same cloud.

After ISO8 my sons iPad rings when I receive a call. I have two 5c's and an iPad under one apple id. Can I assign a new id to my wife's phone and my son's iPad and then all of use the same cloud under the new update? Will my wife lose her contacts? Im thinking what I need to do is start both devices from scratch and assign new id's with different emails and then add them to family sharing. Am I correct here, I just want to verify before attempting so I do not lose anything or create unnecessary backlash in my direction. Thank you for any assistance

If your goal is to stop your son's iPad from ringing when you receive a call, all you need to do is go to Settings>FaceTime on his iPad and turn "iPhone Cellular Calls" off.

Remove PR Mandatory for PO and Assign new PO Layout to one User

Hi Experts,
I want to remove PR mandatory for PO and assign new PO Layout for one User. I am facing following problem.
1. I have already created a function authorisation Z1 with reference to PR and assign the same in SU01, Paramenter EFB - Z1.
Now I have removed ref to purchase requisition tick and assign new PO layout in Z1.
But ref to PR not removed, and new po layout is not coming.
What should I do.
Thanks in advance.
GR

why dont u assign the new PO screen layout to the PO document type thru spro-mmpurchasingpo-define document type---here assign ur new field selection with the PO document type coz whatever the screen layout of PO comes while processing me21n,it comes due to the field selection present here as per my knowledge.
regards,
indranil

Problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2

Hi experts,
I'm getting problems in creating and storing new documents using BAPI_DOCUMENT_CREATE2.
I have a scenario where is defined the document type ZC1, document part 200, authorization group 0002 and for all of these documents the storage category "Cofre DMS1". And the status which demands the storage category is 'FR'.
I've been fullfiling the BAPI_DOCUMENT_CREATE2 in this way:
"Tables
data: it_doc like bapi_doc_draw2,
      it_return like bapiret2,
      it_files like bapi_doc_files2 occurs 0 with header line,
      it_objs like bapi_doc_drad occurs 0 with header line.
"Variables
data: wl_doctype like bapi_doc_draw2-documenttype,
      wl_docnumber like bapi_doc_draw2-documentnumber,
      wl_docpart like bapi_doc_draw2-documentpart,
      wl_docversion like bapi_doc_draw2-documentversion.
it_doc-documenttype = 'ZC1'.
it_doc-documentpart = '200'.
it_doc-documentversion = '00'.
it_doc-description = 'Test of documents creation via BAPI'.
it_doc-username = sy-uname.
it_doc-statusextern = 'FR'.
it_doc-authoritygroup = '0002'.
refresh it_files[].
clear it_files.
it_files-originaltype = '1'.
it_files-storagecategory = 'Cofre DMS1'.
it_files-wsapplication = 'PDF'.
it_files-docfile = 'c:\110307.pdf'.
it_files-description = 'Test file'.
append it_files.
refresh it_objs[].
clear it_objs.
it_objs-objecttype = 'EKPO'.
it_objs-objectkey = '47000497600010'.
append it_objs.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
    documentdata = it_doc
IMPORTING
    documenttype = wl_doctype
    documentnumber = wl_docnumber
    documentpart = wl_docpart
    documentversion = wl_docversion
    return = it_return
TABLES
    objectlinks = it_objs
    documentfiles = it_files.
After execute the BAPI process I got the following error:
E26 087 - Data carrier COFRE DMS1 not defined
Does anybody have a sugestion to help me, please?
Thks
David
Edited by: David Tsutsui on Mar 18, 2010 10:52 AM

Please refer to this thread, it tells why you need a data carrier you can also configure the same in DC20.
Data Carriers for Storage the Originals of DMS

How assign 7 cost centers to one cost element.

hi
how assign 7 cost centers to one cost element.
Ex: FUEL can use 10 departments. how to assign this cost centers to one cost element.
Thank you.
Ashok kumar

Hi Anil,
At the time of posting fuel expenses you need to have 10 line items for each seperate cost center or
You can post to a one cost center inturn you can use Distribution or Assessment for re allocating to other cost centers.
Regards,
Murali

How does APEX create and save new files. What extension does it save in?

Hi can someone help me with this question?
How does APEX create and save new files. What extension does it save in?
Cheers!
VJ

It's really too bad we can't see VJ's face when the concept sinks in. This is one of my favorite moments when teaching APEX classes. Most people love it, some people don't. If nothing else it really proves the power and performance of the Oracle database. Each page view can generate 40+ queries, yet on the average system this takes less than .04 seconds.
Keep in mind there are no undocumented features or "Oracle Internals" that the APEX team uses to achieve this performance, just sound database design. With every feature they add they evaluate how it will be used and design the tables and indexes to most efficiently answer the query. Sometimes this means going against "purist" normalized principals.

Reg: How to create and assign jco in xcm (CRM 5.0)

Hi All,
I have configured CRM 5.0 on Win/SQL.
I am in the process of configuring IPC 5.0.
I have made the cnahges as per the config. guide for IPC.
I have to do some settings in XCM.
For which I have to create and assign JCO in XCM.
Which I am not able to do so.
Please do advice and help.
Rgs
Vikas

Vikas
Good. I will support you to my level best !!!
Assumption: U have the Admin User Id /Pass
The URL should look similar to this :http://<host>:53500/isauseradm/admin/xcm/configTreeSelect.do
1. On the Left Panel, Select
 Start --> Components --> Customer --> JCO
2. Now give the name of the JCO Customer component configuration and press ENTER
3. Meanwhile Collect the Details of the SAP CRM 5.0 Server (Client no,lang EN, System Nu,AS Host)
4. Pucth in the Appropriate details at the Properties requested in the JCO Property. Go with group_connect in Base Configration prperty
5. Save the Config
6. Press TEST RUN button for testing the JCO connection
 REsult will be: GREEN for Succesful Connection
 RED for unSuccessful Connection
Hope this helps !!!
Thanks
Jack
Allot points if my post helps !!!!
Message was edited by: Jack

How to create and assign role

Dear all,
I want to create the role and assign.
kindly let me know
shailesh

Please have a look at below link. It explains how to create and assign content ( roles, iveiws) in Portal
http://help.sap.com/bp_epv170/EP_US/BBLibrary/documentation/N04_BB_InstallGuide_EN_US.doc
Kindly assign points if helpful
Regards
Jayesh

Need a bapi which creates and assigns notification to maintenance order

Hi,
I am currently using a bapi "BAPI_ALM_ORDER_MAINTAIN" in PM to create an order with its operations. Now my requirement is to create and assign a notification to certain types of orders. This bapi is not able to handle notifications.
Thanks
Pradeep

Hi Karthikeyan,
Since this issue is resolved long back I don't remember everything related to it. But as far as I remember, the behavior of transaction IW32 is such that, while saving the work order, it cross checks with table T350. If field "NOTDAT" in T350 is checked for that order type then it automatically creates a notification and assigns to that order. I just made use of this behavior and used BDC approach to solve this issue.
Hope the things are clear.
Regards,
Pradeep.

Create number range and assign new product id

hi,
can anyone tell me the steps to create the number range and assign it to the product id..
and replace existing product id to the new one through program or.. is there any standard program is available to change the product id
thanks
dinesh

Hi Dinesh,
Agree with Arden, I think there is no number range feature for product IDs. You can have your own number range object and intervals with custom solution on UI to create product IDs sequentially.
I am not sure but have a look at the TCode: COMC_MATERIALID_ALL which may be doing what you need.
You cannot change the product ID once created I think.
You can change the category assignment of the products through the report : COM_PRODUCT_RECATEGORISATION
Check enhancement spot : CRM_PRODIL_EXIT which has got some methods for CREATE and MODIFY Products.
Hope this will be useful.
Regards,
Naresh

Create and assign substitution

Hi,
Can anyone tell me how to define substitution via user-exists and how to assign the substitution to controlling area T001 via Financial Accounting (New) ->General Ledger Accounting (New) ->Tools ->Validation/Substitution -> Substitution of Profit Centers in Customer Orders -> Assign Substitution Rules.

Hi Venkatesh,
Thanks for your reply.
substitution logic.
The substitution look all relevant information and look for an entry in the Z-tables:
-     DATAB / DATBI
-> look up sy-date (system date). sy-date should be between DATAB and DATBI
-     KOKRS
->is available in VBAK, so should be available in an internal table at the moment of substitution. If not, look-up via sales organization  company code  controlling area
-     Z_SOL_CODE (solution code)
->the solution code will be available on each sales order line as a partner function: partner function u2018ZSu2019
->from solution code, look-up solution grouping in ZF_SOL_MAPPING
-     Z_MACRO_SEG     (macro segment)
-> the macro segment needs to be looked-up from the sold-to part of the sales order  in the customer master  (menu) additional data  Attribute 1 (field BRSCH)
Based on the above logic, the system needs to look-up the correct profit center in substitution table.
1.I will copy the include RGGBS000 into a Z include and put my exit in that include.How to update the include name in T80D table.
2. Through SPRO I will create a substitution and the step containing prerequisites and substitutions.
How can I include the above substitution logic in the substitution field and what needs to be filled in the prerequisites field.
Where can I do the coding for the exit mentioned in the zinclude program and how is this zinclude related to substistution.
Please reply

Steps to create and assign new cost centers?

Similar Messages

Maybe you are looking for