Steps to create stage11i for linux

Hi guru's
Please Help me to create stage11i file on linux
please send me the steps to create stage file

hi the stage for 11i look like follow
Stage11i/StartCD--->start here
Stage11i/oraiAS--->tools cds
Stage11i/oraDB-->RDBMS cds
Stage11i/oraApps-->appl_top cds
Stage11i/oraAppDB--->database cds
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience

Similar Messages

Steps to create tabstrip for subscreen in selection screen

hi,
can let me know the steps taken to create subscreen in selection screen and put in tabstrip?
i need to have 3 screens. 1000 being the tabstrip, 2000 being first subscreen and 3000 being the second subscreen.
i have the abap code but i do not know the steps to create especially 1000 screen.
for 2000 and 3000, once i activated the program, these 2 screens added but i do not know where can i create the 1000 screen.
also, should i use wizard to create tabstrip?
please advise. thanks
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.        SELECTION-SCREEN BEGIN OF BLOCK x WITH FRAME TITLE text-001.
SELECT-OPTIONS: para1 FOR field1 ,
                              para2 FOR field2.
SELECTION-SCREEN END OF BLOCK x.
SELECTION-SCREEN END OF SCREEN 2000.
SELECTION-SCREEN BEGIN OF SCREEN 3000 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK y WITH FRAME TITLE text-002.
SELECT-OPTIONS: para3 FOR field3 ,
                              para4 FOR field4.
SELECTION-SCREEN END OF BLOCK y.
SELECTION-SCREEN:SKIP.
SELECTION-SCREEN END OF SCREEN 3000.

e_l,
See the total doc.. with example.
Assigning a Subscreen Area to a Tab Title
You must assign a subscreen area to each tab title. There are two ways of doing this:
Paging in the SAPgui
You need to assign a separate subscreen area to each tab title, and define the function codes of the tab titles with type P (local GUI function). In the screen flow logic, you call all the subscreens in the PBO event. This means that all of the tab pages reside locally on the SAPgui.
When the user chooses a tab title, paging takes place within the SAPgui. In this respect, the tabstrip control behaves like a single screen. In particular, the PAI event is not triggered when the user chooses a tab title, and no data is transported. While this improves the performance of your tabstrip control, it also has the negative effect that when the user does trigger the PAI event, all of the input checks for all of the subscreens are performed. This means that when the user is working on one tab page, the input checks may jump to an unfilled mandatory field on another page.
Local paging at the SAPgui is therefore most appropriate for screens that display data rather than for input screens.
Paging on the Application Server
One subscreen area is shared by all tab titles and called in the PBO event. You define the function codes of the individual tab titles without a special function type. When the user chooses a tab page, the PAI event is triggered, and you must include a module in your flow logic that activates the appropriate tab page and assigns the correct subscreen to the subscreen area.
Since the PAI event is triggered each time the user chooses a tab title, this method is less economical for the application server, but the input checks that are performed only affect the current tab page.
Procedure in Either Case
You create the subscreen areas within the tabstrip area. You assign the subscreen areas to one or more tab titles in the Screen Painter by selecting one or more titles. You can also assign a subscreen area to a tab title in the tab title attributes by entering the name of the subscreen area in the Reference field attribute.
The procedure for the alphanumeric Screen Painter is described under Creating Tabstrip Controls.
If you are paging at the SAPgui, create a subscreen area for each tab title. If you are paging at the application server, select all tab titles and create a single subscreen area. The subscreen areas may not cover the top line of the tab area. However, within a tab area, more than one subscreen area can overlap.
Programming the Flow Logic
In the flow logic, all you have to do by hand is include the correct subscreens. The screen flow and data transport to the ABAP program is the same as for normal subscreens. There are two ways of programming the screen flow logic, depending on how you have decided to page through the tabstrip control.
Paging in the SAPgui
When you page in the SAPgui, you must include a subscreen for each subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN: <area1> INCLUDING [<prog 1>] <dynp 1>,
                  <area2> INCLUDING [<prog 2>] <dynp 2>,
                  <area3> INCLUDING [<prog 3>] <dynp 3>,
PROCESS AFTER INPUT.
CALL SUBSCREEN: <area1>,
                  <area2>,
                  <area3>,
Paging on the Application Server
When you page on the application server, you only have to include a subscreen for the one subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING [<prog>] <dynp>.
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Handling in the ABAP Program
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The screen contains a tabstrip area called MYTABSTRIP with three tab titles PUSH1, PUSH2 and PUSH3. The function codes have the same name, and all have the function type P. One of the subscreen areas SUB1 to SUB3 is assigned to each tab title. The pushbutton has the name BUTTON and the function code OK.
In the same ABAP program, there are three subscreen screens 110 to 130. Each of these fits the subscreen area exactly. The layout is:
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN: SUB1 INCLUDING SY-REPID '0110',
                  SUB2 INCLUDING SY-REPID '0120',
                  SUB3 INCLUDING SY-REPID '0130'.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN: SUB1,
                  SUB2,
                  SUB3.
MODULE USER_COMMAND.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
When you run the program, a screen appears on which the second tab page is active, since the program sets the ACTIVETAB component of the structure MYTABSTRIP to PUSH2 before the screen is displayed. The user can page through the tabstrip control without the PAI event being triggered. One of the three subscreens is included on each tab page.
When the user chooses Continue, the PAI event is triggered, and an information message displays the function code of the tab title of the page that is currently active.
Tabstrip control with paging on the application server.
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
DATA NUMBER TYPE SY-DYNNR.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
NUMBER = '0120'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ELSE.
    MYTABSTRIP-ACTIVETAB = SAVE_OK.
    CASE SAVE_OK.
      WHEN 'PUSH1'.
        NUMBER = '0110'.
      WHEN 'PUSH2'.
        NUMBER = '0120'.
      WHEN 'PUSH3'.
        NUMBER = '0130'.
    ENDCASE.
ENDIF.
ENDMODULE.
The statically-defined next screen for screen 100 is itself, and its layout is the same as in the above example. However, the function codes of the three tab titles have the function type <blank> and they all share a single subscreen area SUB.
The same subscreen screens 110 to 130 are defined as in the last example.
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
In this example, the program includes a subscreen screen in the subscreen area SUB dynamically during the PBO event.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
This example has the same function as the previous example, but the paging within the tabstrip control is implemented on the application server. Each time the user chooses a tab title, the function code from the OK_CODE field is assigned to the ACTIVETAB component of structure MYTABSTRIP. At the same time, the variable NUMBER is filled with the screen number of the subscreen that has to be displayed in the subscreen area SUB of the tabstrip control
Pls. reward if useful

Steps To create workflow for HR module

hi experts,
i have a requirment in HR module to create a workflow, requirment is when an employee is transferred to any other stores or departments automatically a mail has to be trigeered to xxxx mail id. as im new to workflow can any one kindly help me in solving this requ.

You can also do this with the help of exits.
Use exit PBAS0001
In EXIT_SAPFP50M_002 first you can capture employee details
during transfer and then create a ztable to maintain the mail ids and use
function module to send mail for the same.

Steps to create PO for service order

Hi All,
I am trying to create a Service Po its giving me the error message mention below. what i am missing.
You have no authorization to create without reference to another document
Message no. MEPO063
Please advise
Thank you

hi,
First creat service master - (AC03),
You can copy from exising service master. and goto ME21N, select vendor and comp,pur group, pur org.
Enter Item category = D and a/c assign = K than enter input text at short text field (don't enter any material master code at material code field) ,
here you willl find "material data" at item details are there you have to select your service master code (where have you created by you at AC03).
save the po and do reqular process.
reg
mrs

How to create transaction for table maintinance generator

what is the procedure(steps) to create transaction for a table maintinance generator

Hi,
The link will be useful for ur requirement.
allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8129f164-0a01-0010-2a8e-8765287250fc
REgards,
Sarosh

Creating domain for BI Publisher issue

Hello,
Im trying to create domain for BI Publisher 11.1.1.3.0.
When configuring JDBC there are two component schemas: BIP Schema and OWSM MDS Schema. For database I have MS SQL Server configured with required RCU schemas.
The strange part: when testing the configuration, one fails - the BIP Schema. In the result log I see a very strange ""SELECT 1 FROM DUAL"" test which is obviously for oracle and not MS SQL.
For the 2nd schema, the one with successful test, there is a valid test query.
Please help me understand what am I doing wrong, why is there an Oracle test query for a MS SQL database and finally why on earth only one test fails because for both i have the same database type.
The version of fusion middleware is the one that came with BI installer 11g (11.1.1.3.0)
If wonder why am I doing this manually it is because the BI installer hangs at step 11 Creating Domain for about 100 minutes and then exits with timeout. great programming!
Please give me any hint, advise i can use to make BI Publisher run.
thank you

809239 wrote:
Hi Experts,
OBIEE 10.1.3.4.1.
I am able to login bi publisher though Administrator user. But am not able to login remaing users.
I am getting below error.
Oracle BI Publisher Enterprise
Reporting Login: Login failed: Please contact administrator for your username/password.
Error Details
Error Codes:
Please help above issue it is very urgent.
ThaksHi,
Refer to this post to make sure you have all the settings implemented correctly: ( http://onlineappsdba.com/index.php/2009/01/15/oracle-bi-publisher-admin-console-xmlpserver-login-issue-administratoradministrator/ ).
Also, check the log files to see if you can get more detailed error messages.
-Amith.

Function module to create messages for Purchase order

Hi All,
I am writing a BDC and recording steps to create Messages for a Purchase order(ME22N).
For an existing PO, go to Messages and create a message with output type for EDI. Already there are existing Output types for Print and Fax,
How do I default my cursor at the 3rd record if Print, and Fax are already there, and when I run this BDC for several PO's How do I know how many messages are there and where to place cursor to create message for EDI.
Is there any Function module or Bapi available wherein I can directly give the PO number and create the message.
Please suggest
Thanks-

I have a list of PO's in the internal table, I need to put a loop and for each PO, I need to create a message with output type for EDI. as I am not sure if there are already messages available for Print, Fax, and Email. I have an issue placing the cursor on the Messages window.
So i thought if there is any function module to create message without going to message window, I can avoid those complications.
How to do this. any suggestions?
Thanks-

Unable to create account for SAPserviceEC6

Hi,
I have the above problem when trying to install 6.0.
We reformat the server clean few times and still have the same error message.
happened in step 3: Create user for SAP system,
Log:
INFO 2009-08-08 22:45:47.991
Nothing to do. User privileges are an empty string.
INFO[E] 2009-08-08 22:45:52.593
FSL-01027 Account user="PHOENIX\SAPServiceEC6" does not exist.
WARNING 2009-08-08 22:45:57.179
Unable to get the name of a domain controller for domain .
ERROR 2009-08-08 22:46:10.923
FSL-01002 Unable to create account PHOENIX\SAPServiceEC6. HRESULT=0x80005009
ERROR 2009-08-08 22:46:10.923
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-08-08 22:46:10.923
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
aditional info: We use the same installer , windows server 2008 64bit.
Why?
Regards,
Andy
Edited by: Andy Quipit Sayus on Aug 9, 2009 6:18 AM

Hi all,
Today I faced the similar problem and I found that it is due to I had joined in domain for my server so that the installation could not create users.
I changed the domain to local( example : WORKGROUP) and the installation could continue. After that you can join your server to domain again
To whom it may be concern

How to create universe for sap bw cubes in Business objects

Hi all,
can anybody tell me the steps to create universe for SAP BW CUBES from Business objects software.
Thanks.
Cheta.

Hi,
In a SAP-BW and BO environment using Business Object Universe generator, it appears that BO requires direct data base connectivity to read data from BW.
In XI/XI R2 , it use an RFC connection (MDX driver, which makes BAPI, SAP API calls) to SAP BW to obtain the details of the BW Query or Info Cube for building the Universe using the XI/XIR2 Business Objects designer application. The request for the query or cube details is done VIA BAPI function calls. For the SAP BW Query we must have allow External Access to this query checked under the Query Property window.
Our Integrated Solution Kits do not access the SAP BWs data source.
Hope this helps,
Regards
CSM Reddy

How to create a c++ shared library (.so) for linux real time (for myRio) with Eclipse to use in LabView?

I tried already these Tutorials and Advices but I didn't find a solution:
- http://www.ni.com/tutorial/14625/en/
- http://www.ni.com/tutorial/14690/en/
- http://forums.ni.com/t5/LabVIEW/Shared-Library-on-myrio-Linux-Real-time-system/m-p/2842540/
- http://forums.ni.com/t5/LabVIEW/How-to-create-shared-library-for-linux-real-time-target-in/m-p/28218...
- and some more
I want use c++ codes on linux real time. For testing reasons I want to have a function that adds 2 values and gives the result.
I've done these steps:
1. writing a c++ file in Eclipse (see screensot 2)
2. building a shared library (.so) from my c++ project in Eclipse (with Cross GCC)
3. putting this file on myRio (path: /usr/local/lib/)
4. creating a VI that calls this library from Labview with a "Call Library Function Node" (see screenshot3)
5. Setting the properties for the "Call Library Function Node" (see screenshots 4-7)
After I run this VI i get this error message: LabVIEW: (Hex 0x627) The function name for the ... node cannot be found in the library. To correct this error, right-click the Call Library Function Node and select Configure from the shortcut menu. Then choose the correct function name. (see screenshot1)
I've tried a lot things to solve this problem but I couldn't find a solution. Would be very happy if anyone can help me. I guess that I have to edit my c++ code to export my function (symbol). But I have no idea how to make it. I also tried it with a dll file in the same folder but it didn't help.
Perhaps someone can send an example which works on myRIO.
Thanks!
screenshot1
screenshot2
screenshot3
screenshot4
screenshot5
screenshot6
screenshot7

can see it in the screenshot8 there is a function called "_Z8AddierenddPd" instead of "Addieren". I copied this name to Labview (see screenshot9) and it worked.
I'm sure that there is a way to compile the shared folder with gcc without decorations (mangling). But I don't know how. If someone has a recommendation I would be very glad!
Prepend each function declaration that you want to be available without name decoration with
extern "C" <your function declaration>
Or if you have multiple functions you want to export you can in the header file where you declare your functions simply use:
#ifdef __cplusplus
extern "C" {
#endif
<all your function declarations>
#ifdef __cplusplus
#endif
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Steps to create f4 help for a table

steps to create f4 help for a table

These are the steps you have to take first:
1. Please elaborate, your question does not all too clear.
2. Search on SCN.
3. Search on help.sap.com (for creating F4 search help).
I guess you get the picture. Creating an F4 help is quite easy (you can find that on SCN for sure), but what do you mean by
for a table
1.Do you want to create a field which has an F4 help for searching tables or
2. is this field part of a table and you need to have a search help for that field of that table in order to select some sort of value
3. Is this a custom table.
4. Is this a custom field for which F4 help should be added.
5. Won't a domain value do.
6. etc.

Steps to create a logical system for client 001.

Hi,
In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI?
Here, can you give me steps to create a logical system with client 001 using tcode scc4.
Thanks,
Kannan

hi
     First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
     Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
     You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
     Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
     Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
     R/3 - B W - R/3
     Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
     PC Flat file , DB  Database
     Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
     BW  RS1  SOURCE SYSTEM  CREATE MANUAL AUTOMATIC CELL
     R/3  Test connections login  back  replicate method  active data R/3 Source system you will able to.
regards
ashwin

Step 20 - Create new connection for NORTHWIND user, Northwind - Migrated

Hello,
I am migrating the Northwind database from Access to Oracle, and I am following the directions, but when I get to step 20, create a new connection for the Northwind User, Northwind - Migrated, I cannot create the connection. After running the converted model script that was generated by the workbench -- I don't see the Northwind - Migrated database. So how can I create a connection to it?
Also -- after I ran the script, I did not see any messages in the log showing I ran the script, but the status bar at the bottom of the tool said script finished..... I am confused.
Thanks!
Jeff

Anyone have this same issue trying to migrate the Northwind database to access using migration workbench?
Thanks so much,
Jeff

How to create database in oracle8.0.5 for linux

I install an Oracle 8.0.5 standard edtion for Linux .But when I
login sqlplus as 'system'and use 'create database...',it reply
that I don't have priviledge!Why?
How can I create database anyway?(with which tools or methord?)
null

coco (guest) wrote:
: I install an Oracle 8.0.5 standard edtion for Linux .But when I
: login sqlplus as 'system'and use 'create database...',it reply
: that I don't have priviledge!Why?
: How can I create database anyway?(with which tools or methord?)
If you can connect as 'system' in sqlplus then I have a feeling
that you already have a database running :)
Anyway, to create another one ensure that you have new ORACLE_SID
set in environment and new init<SID>.ora file created, then:
$ svrmgrl
SVRMGR> connect internal
SVRMGR> startup nomount
SVRMGR> create database ....
(after that usually add rollback segments/tablespaces and run
catalog and catproc scripts etc.)
Andre
null

STEPS TO CREATE A MEMBER FOR LOYALTY PROGRAM

Hi ,
I am currently trying to set all the necessary steps to create a simple scenario in order to understand the functionality of loyalty. Until now, I have created a loyalty program, a RewardRule Group and a RewardRule, However, i don´t know which steps should i follow to create and assign a member into a loyalty program.
1. Obviously, I have to create the member first, but, if I need to use a private account that already exist, to be assigned as a member, should I enter a specific role in the assigment role block inside the private account ?.A consultant told me that we have to use the role u201CMemberu201D, but this role doesn´t exist in our sytem
2. Once the member has been created, should i assign it into a membership , using the member ID created in the previous step?.
3.Other steps?
Thanks, and waiting for any help
DPL

Hello,
As far as I am aware, a member is just a standard individual/corporate account and Membership represents the participation of an individual account (natural person) in a loyalty program. I don't think any additional role needs to be maintained for a member to be added to a membership. If you want to create a new member, it would be equivalent to creating a new account.
So the step should be to just create a membership and during creation, from the F4 help, you can choose the account you want to assign to this membership and also the Loyalty Program can be chosen from the DDLB.
There are different types of membership available such as Standard Membership , Shared Account Membership
Group Membership for which you can go through the documentation in SMP or help.sap.com.
Hope this helps.
Regards,
Nisha

Steps to create stage11i for linux

Similar Messages

Maybe you are looking for