Steps to create PO for service order
Hi All,
I am trying to create a Service Po its giving me the error message mention below. what i am missing.
You have no authorization to create without reference to another document
Message no. MEPO063
Please advise
Thank you
hi,
First creat service master - (AC03),
You can copy from exising service master. and goto ME21N, select vendor and comp,pur group, pur org.
Enter Item category = D and a/c assign = K than enter input text at short text field (don't enter any material master code at material code field) ,
here you willl find "material data" at item details are there you have to select your service master code (where have you created by you at AC03).
save the po and do reqular process.
reg
mrs
Similar Messages
-
Settlement Rule for service order created based on sales order
Hello,
I am creating a sales order and entering WBS as an cost object.
After creation of sales order the Service order is created.
For service order type in the settlement profile WBS is maintained.
But the system is not copying the WBS in Service order which is maintained in sales order.
Can any body have an idea on this?
Regards
AbhijitHi,
As far as my understanding when service order is created through sales order then settlement rule is SDI and its item number
Not what you maintained in account assignment tab of sales order
When you settle service order then cost will settle on sales document and its item and then latter you settle sales order then settlement receiver is WBS element which you maintained in account assignment tab
Kapil -
"No transaction type is available for creating a transaction" service order
Hi all,
I am new in IC .
I try to create service order or service ticket for incoming calls
We are using CRM 7.0
After I confirm the account I try to create service order
But no screen displayed and error "No transaction type is available for creating a transaction" occurs
in customizing there is a transaction type SRVO, also I copied it to ZRVO
But here how can I define that this transaction type is assigned to this application??
Please reply in detail steps.
Thank you.Hi Rupesh,
Thanks for your reply..
I made a lot of controls but I can't find where I am wrong..
My senario is, taking phones, create interaction record and create order for further investigation.
I copied IC_AGENT role.
I copied transaction type 0010 to Z010
I create business transaction named ZBTP for transaction type Z010
I made Define Transaction Types for Navigation for Z010
Then Define Business Role -> Assign Function Profiles
Here I assign my business transaction ZBTP to IC_BT function profile
But when I connect tot the system with user having this business role
I can create interaction record with type Z010, it is ok.
When I press Service Order it gives this error.
Work center id for Service order is : IC_UIU_SVO
I copied my business role from IC_AGENT, and here this work center id was not active
In my business role I made it active. Is this work center can't used in IC senario
Also how can I understand which transaction type is needed for it??
If I know which transaction type is needed to create service order or service ticket under IC, then I will control it of course..
I also copied transaction type TSVO(service IC) to ZSVO and do the above things for this type too..
But nothing changed..
Please help !! -
BAPI for service order create/change
Hi,
I need to create and update service order on release 4.6C. I have searched for available BAPI but did not come up with anything. Searching the OSS and forums, I found that there are function modules BAPI_ALM_ORDER_CREATE and BAPI_ALM_ORDER_MAINTAIN available on release 4.7 . There are notes about downgrading these function modules to 4.6C (Note 655926 is one of them, search ALMBAPI).
My question is, has anybody done this ? What all is part of this downgrade ? There are numerous correction notes, and did you have to apply those ?
Any help will be greatly appreciated.
Regards,
Rajendra SalechaHi Rajendra,
The note 655926 you mentioned, clearly details all the steps involved in downgrading the BAPIs to 46C. You just have to follow the steps in that order and yes, you need to have all the notes that are mentioned in there, unless they are delivered as part of some support pack and you are on that support pack level already.
Srinivas -
Object Type (OBJTYPE ) for Service Order & Billing
Hi,
I am developing a report for billed service orders . I wanted to know what is the
OBJTYPE for billing.
In the CRM_ORDER_READ function module we can see
OBJTYPE = BUS2000117 ( For Service Confirmation)
OBJTYPE = BUS2000116 ( For Service Order)
How my report will fetch only those service order details which are billed ?
Is there any common key ?
I am using extracxtors in BW:
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Regards
PKOK, next step could be to have a look to see if Plant is checked (I think it might be) and if you so could create roles on groups of plants which represent each Sales area. It's not perfect but short of changing the code (you could speak to an ABAPer to see if there is a user exit or enhancement point they could use) you could reduce some of your risk this way
-
Quotation Creation and Billing for Service Orders--node details needed
Hi ,
I need to work on node "Quotation Creation and Billing for Service Orders" ....I see lot of integration with SD and FICO . Can any one give details about integrations required and what is done in this node ....
Regards
NPBThere are different steps to be done for that.
1. Create DIP Profile in ODP1 & check the consistency in ODP2 - DIP will be used to bill the customer based on resource (labor & material) usage. Creation of DIP profile has been discussed many times in this forum. Please check.
2. Assign the Quotation document type & Billing type used in DIP profile to your sales area - Your document type should be assigned to your sales organisation, distribution channel & division combination. -
BAPI for Service order creation
Hi ,
Please tell me if any Bapi for service order creation , T-code : IW31
regards,
PrakashHi Prakash,
Have a look on the following BAPIs:
BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
Hope this will help.
Regards,
Nitin. -
Plan Assessment and Allocation for Service Orders (CS)
Hello,
I'm trying to run plan assessment (KSUB) and plan allocation (KO9E) for a service order (created via IW31), but I'm not able to do it.
I can do assessments (KSU5) and allocations (KO8G) with real values, but since I'm not able to do it in plan mode, I can't have comparative values between real and planned values (no value is flowing to allocation secondary cost elements).
Can anyone let me know if this is some sort of limitation for Service Orders? Because I checked SPRO in transaction code KOAI and for this type of orders there is no Indicator for Integrated Planning, nor it's possible to assign a planning profile.
Many thanks for any help you can provide!
Regards,
CátiaI created a SAP message and they confirmed that this is not possible.
-
WBS Settlement rule control for service orders
Hello,
We have an requirement to implement validation point for service order settlement rule. Currently there is no validation check of settlment rule for service order. So that the settlement is happend to incorrect receivers in service orders.
For example :
Service order created for company code - 400 and the settlement rule receiver should be WBS which is belongs to same company code but some case , user are maintained wrong WBS in settlement rule which belongs to some other company code.
Can you please hlep us on this requirement and suggest any enhencement point avalible on the same.
Thanks
RishaHi,
Please go to okg2,
Calculate wip or result analysis
remove the tick for Order In Engineer to Order Production
Now run result analysis and check whether settlement will not happen for cross company code.
please check this and revert back.
Thanking you
Vengaiah Chowdary -
Default settlement rule with settlement type as FUL for service orders
Hi Folks,
Could you please advise me on the below issue?
Requirement: setting up of default settlement rule with default settlement receiver as u201CCOST CENTREu201D and settlement type as u201CFULu201D for the maintenance orders (Order category u2013 30).
I was trying to configure the same in transaction KSR3_ORI to assign the strategy to the service order type by clicking u201CNew Entriesu201D system not showing the drop list for the status column which is a mandatory field.
We have applied the below notes:
Note 313454 - Info: Default value for settlement type
Note 851975 - Settlement use automatic generation creates
Could you please guide us to get the default settlement rule for service orders along with settlement type as u201CFULu201DI was also with this problem in 2013 january and only found some information about this, here.
Our solution was change the Maximum number of distribution rules in Maintain Settlement Profiles to 1, because we wanted the FUL rule and it is always in the first line.
Now, for curiosity, I was search for another solution and found the SAP note 2028108 that explain that is not possible to change the strategy for PM/CS orders.
This note was released at 09.06.2014 -
BAPI for Service Orders Confirmation
Can somebody please provide BAPIS for Service Orders Confirmation and other related BAPIS
Thank youTo create service confirm order use "BAPI_BUSPROCESSND_CREATEMULTI".
Regards,
Animesh -
Function Module to Create Addresses for PM order
We are currently using BDC process to Create addresses for PM orders. I would like use a Function Module instead of the BDC process. Can somebody point me to FM that can create ADRC record and return ADDRNO?
Thanks Guru'shi,
check this link:
[Business Address Services|http://help.sap.com/saphelp_nw04/helpdata/EN/c8/13b237b9a9a968e10000009b38f8cf/frameset.htm]
regards,darek -
Dear all,
Can anyone please help me How to create an PO to procure services and what is whole process, After creating PO for service do we need to receive also.
do we need to define a item in inventory as a service?I am very confuse, Please help me..Hi,
You need to implement Oracle service Procurement module to create PO for services.
First, you need to create requisitions for Rate based temp labour/Fixed Price services etc. then convert this requisition to Complex PO.
The complex PO can be of one of the three types - Milestone based/Lumpsum Order/Rate based temp labour(Contingent worker).
You don't need a item or recipt as you need to create work confirmation for Milestone/Lumpsum orders.
The timecard entered in OTL by the contingent worker will be integrated with the complex PO created for Contingent worker and AP invoice will be created accordingly.
Thanks,
PS. -
Hi
Even though freight condition is maintained in the service order, while doing MIRO it is not picking.The service entry sheet is created & accepted.
Regards,
KumarHi,
Why & how freight will come into picture of service procurement ieu2026.For service order.
If you are procuring material, of course you will have freight charge as material need to be carried out physically from vendor place to your company premises but service charge is just like a slab (_service is an activity_, intangible material & as services cannot be stored, does not contain any inventory data) where it may involve of service tax with service base amount. You may need to be re-mapped your business process.
More check link:
Account determination for MIGO/MIRO
Regards,
Biju K -
Stage wise payment for Service orders
Hi techies,
stage wise payment for Service orders. Following items are required in SAP while creating & releasing Service Entry. Matter has detailed by following example:
Stage wise payments for an item for eg: Rate is Rs 100 per Rmt.
Item shall be certified as 100% and released stage wise.
Say 60% release on deployment of machinery
Another 20% on execution of work
Another 10% on submission of final bill
Balance 10% as Retention Amount.
Please provide me the solution for release of part rate as explained above.
Thanks in advance,
NBYou,can use Invoice Plan....
In order to work with an invoicing plan according to ur requirement you mentioned, you must maintain the following settings (among others) in
Customizing:
Desired invoicing plan type
Date categories
Date descriptions
Date proposals
You can also specify whether the invoicing dates are to be entered/maintained manually or whether the system is to suggest them.
You can do settings here:
SPRO ---> MM --> Purchasing --> PO --> Invoicing plan --> see here all the settings...
Regards,
eswarmanu...
Maybe you are looking for
-
How to send report output to two detinations at a time from command line?
Hi , how to send my report to two detinations at a time from command line i.e FILE and Mail ? i created batchfile in that i mentioned one line for file(DESTYPE=FILE) perpose and another line for mail perpose(DESTYPE=Mail).i don't want to mention to l
-
JOIN for BSEG, BSIS, BSAS, MSEG, BKPF and MKPF
I am developing a report related to G/L . i am using the Tables BSEG BSIS BSAS MSEG BKPF MKPF ............please give me the Joinings of these tables.......how exactly we can join and get the prefect Data.... Thank U waiting for ur replies.... Title
-
When will I get my pre-ordered Verizon iPhone 5?
I was the FIRST person to pre-order a black 64G at BestBuy. Does this guarantee that I'll receive it on the 21st?
-
Secondary Server MP is not working after primary server database up gradation.
Hi All, Required your Help for MP Issue. we had migrated the SQL data base in one of our Primary server, where there is 10 secondary servers are available. 7 secondary servers are working fine and remain 3 servers MP has down after the migration. P
-
Some question bout URLConnection anyone can help me
First Of all, i want to ask something bout URL connection 1. Is it possible to Modifying some files that i accessed via URLConnection without using CGI files ? 2. What is the limitation of URLConnection Class As far as i know URLConnection Class only