Steps to export B2B Project and Source Control.

Hi,
I need steps to export a B2B project for source controlling it and deploying the code to higher environments.
Right now the coding is done in DEV , We want to push it to TEST.
Thanks for all the help.
Regards,
Sid.

Documents which we have created newly will also be exported, provided it is part of the agreement.
another answer
First time all "export-import". Every change - incremental export and import

Similar Messages

Robo HTML 9 will not open our project from Source Control after initial start.

We have a project in version control that we have been using forever, since 2003 or so and many versions of RH. Now that we have upgraded to 9, this project will open the first time in version control and work normally. Once you close the project and attempt to reopen from the starter screen, it opens just great, just not in version control. The files are still set to read only. I have done this several times and the only way i can work on my project in version control is to act like i am opening a project from scratch, then it needs to overwrite all of my local files with the server files. It would not be so bad but I am 3000 miles away from the server and 13 hops plus a slow firewall on the other end. While this has never been a problem in the past it is a big problem because it takes hours for all the files to download and overwrite my local files.
This only happens with RH9 and Version Control 3.1. RH8 works no problem. So, I don't know if this is a RH9 starter problem or a Source Control Problem. Maybe I will make a similar thread in the RH area. I'll wait to see if I get any useful hits from this one first.
It is very strange, I had RH9 open for several days because I was afraid to close the project for this reason and yesterday I published for the month so the heat is less right now but today, it opened with no source control. If I go to Source Control the only thing i can select is put project in source control. That is how it got into source control after converting to RH9.
We have another project that seems to open from version control normally but we can only save topics in HTML view. No useful answers to that topic after a week.
Got any ideas???
I have tried different folder names, different paths, etc.
Thanks,
dv

Ok, here is a wierd one, I used the add to version control icon in the menu bar, It already knew the path so I figured I'm the only one who has been editing these files for the past few days so I clicked add to version control. It added it. I closed and reopeded and still had the same files checked out. Closed, checked in all, then reopened and it is working in SourceControl. Strange that after opening from source control and closing that you need to reopen and tell it to put the project into source control. Obviously some flag is not getting set somewhere. This might help others having problems reopening source control files.
dv

How to move a project in source control

I messed up & need your advice. I put my first RH project, "core", at the root level of my VSS project:
$
rh_projects
   core
Unfortunately, my "core" RH project is now a child project in a merged help system. I also put the "parent" project at the root level, so now it looks like this in VSS:
$
rh_projects
     core
     parent
... but my VSS folder structure really should reflect my real folder structure, so that other writers can use the same structure when they open the project.
So I want to change my VSS folder structure to this:
$
rh_projects
    parent
    projects
       core
So here's my question (finally!): what's the best way to move the core project in VSS?
* In RH, remove the core project from source control, then put it back under source control at the new folder level, OR
* In VSS, add the new "projects" folder structure and move the "core" folder underneath it, then open it in RH as a "new" project?
thanks,
Jenny

Either way should work.
Method 1 will ensure the source control path in the RH files points to the correct VSS location
Method 2 will keep your change history if this is important to you. However, it is trickier to do. Zip up a copy of your project just in case.
Method 2 details
If you use this method, you need to manually change the VSS path listed in the .xpj file.
Look for something similar to the following. It may be different depending on your versions of RH and VSS. The below is from RH6 and VSS2005. '[' represents and angle bracket.
[matchedpair]
           [name]vc::cookie[/name]
           [value]"$/Dev/Source/Documentation/MyProject", ZTZQBAAA[/value]
[/matchedpair]
You will need to change the [value] line: change the path beginning with $ to your project location.
I don't think you need to change the 8 character code after the comma, but I was never quite sure what it meant. If want to be safe or things don't work, create a temporary new project and add it to VSS at the same level as your project. Copy the bit in green from the temp project and paste it into your real one. Delete the temp project.
Also make sure you delete the .cpd file before opening the project as this sometimes remembers the old location.
HTH,
Amebr
Message was edited by: Amebr
Couldn't get colours to work so changed to words. Hopefully it's clear enough.

Project management + Source Control

we are using labview 8.5 and not well known source control in a team environment. I'm not sure if it is the souce control that I'm using or other searsons, but I had so much trouble using those combination. I want to know what others thought about project management and/or source control in general.
Thanks,
- Jimmy
- Jimmy

Hi!
   Actually, I've never merged, since I'm the only LabView guy on our development team
   I absolutely agree with the fact that SVN is a good tool, but I should confess that I didn't spend much time in evaluating many other tools (never tried MS tools), for this I rely on my colleagues' opinion.
   I can report that SVN is being used in a graphic studio for pictures versioning of course, they don't need to merge images There's virtually no limit in SVN use...
graziano

Working with uncompressed XFL files and source control | Learn Flash Professional CS5 & CS5.5 | Adobe TV

Use the Flash uncompressed XFL file format with a source control system to enable designers and developers to collaborate on Flash projects. Contributors can edit different assets simultaneously and see updated assets as soon as they are checked in.
http://adobe.ly/x0GHI4

This is a great overview of sequential use of source control with the xlf format. However, typically in a team setting, team members are working at the same time. Our team has found that many of the xlf files have one or more timestamp related entries that get updated even when no functional changes have occurred. This is particularly true of DOMDocument file, which timestamps changes, marks library elements as expanded or not, and tracks a published history. All of these changes conflict with anyone who is simultaneously working on the xlf. Any tips on how to deal with these issues?

Flashbuilder 4 and source control?

In my work environment, we work with multiple source code branches of the same code base.
For example, we often have a private branches for ongoing development, and a trunk branch where everything is integrated. During the course of any one day, we need to switch between working on one branch or the other.
With other toolsets, this is easy - project files are checked into source control, and then checked out of whatever branch and built with no modifications.
Is there a way to do this with Flashbuilder4? The prevailing wisdom here right now is that each time I want to work with a new source code branch, I have to import files from the checked out source directory, set some project settings, and rebuild.
Is there a better way?

I'm with Tom here. I don't understand your project setup in your workspace and in your repository.
Since you said you're new to Flash Builder, are you aware of Subclipse? It's a plug-in for Eclipse that integrates SVN. Here are the instructions to download and install http://blogs.adobe.com/jasonsj/2010/03/installing_subclipse_in_flash_builder_4.html.
Jason San Jose
Software Engineer, Flash Builder

Command line build and source control (svn)

Using Flash Builder, what should be checked into source control to enable a command line build without any user interaction? Just checking in all the source directories is apparently not enough - as far as I can tell the individual projects have to be added to the workspace for the build to work.
I've experimentally determined that .metadata/.plugins/com.abobe.flexbuiler.project and .metadata/.plugins/org.eclipse.core.resources are the 2 directories required for my build to work. the com.adobe.flexbuilder.project directory is pretty straight forward and it's obvious what needs to get checked in. the org.eclipse.core.resources directory has quite a bit more files contained in it - do all of these need to be checked into source control for the build to work? Deleting the .history folder appears to be ok.

Hi GB_Austin,
What you need to do is set up a Single Source Layout (SSL) to
build with the conditional tags. If you are not sure how to do
this, let me know. Let's assume you have a SSL that can do this and
it is called "General". To build it using Command Line Compilation,
use the following command:
rhcl [address of your project's xpj file] -l "General" -o
[address of the output directory]
The -l (lower case L) tells the caommand line to use this
SSL. If you leave -l "General" out it will compile your Primary
Layout instead. If you leave out the -o and the address, the output
chm file will be placed in the current folder. So the basic command
is just:
rhcl [address of your project's xpj file]
I hope this has helped,
darkagn

How to create/add my new solution/project to Source Control at VS Online?

Hi, I'm using VS2012. I'm logged into VS online and can open the Team Explorer in VS2012. The frustrating thing is how do I add a new solution to source control? I click on the Solution Explorer, Right click on the solution, Select "Add
solution to Source Control". The a pop up dialog shows up with 3 of my Solution/projects that are there.
The problem is i don't want to put this new solution under any of the 3 solutions currently in Source Control in VS Online. I want this to be a new solution/project to be saved in the source control form the root. If I click on the Advanced button,
edit the "Source Control Folder" path to "$/MyNewSolutionName", I then get an error message saying root folder is reserved only for team project. How can I get a new solution/project to the source control? I've done it before
but it seemed to have changed.
Okay, In Source Control Explorer, I select the root, xxxx.visualstudio.com\DefaultCollection. I then select VS "File" menu and in the drop down I selected "New" and then "Team Project". It takes me to a browser and
lands at VS online. I then type in the new team project name. Everything is good so far. I now returns to my VS on my local PC, I right click either the solution or the project in that solution, select "Add solution to Source Control".
The "Add Solution... " dialog then pops up. I selected newly created Team Project, leave everything else in default and select OK and now I get a different error message saying "Fail to create mapping, cannot map server path, $/TeamProject/projectname,
becuase it is not rooted beneath a team project.
How can I fix this and just get my source into the source control? Thank you.
Thank you.
Thank you

Assuming you map to yoursite.visualsualstudio.com/defaultcollection you will need to create a team project to upload your stuff. If you are trying to save to $/ that is team project collection level and you can only add team projects at that point.
you can add a new team project with the below picture
Then depending on how you have set up your workspace, and assuming locally that you are in the local workspace you can upload your project.

File Status and Source Control

We recently started using Source Control with one of our projects. After opening up the project, we noticed under the Status Field, we're no longer seeing "Writeable" and it's just blank. Please see screen shot below.
In our other project that is NOT connected to Source Control, we're able to see "Writeable" under Status Field.
Could someone please explain to me as to why the project connected to Source Control we're no longer see "Writeable" under the Status Field? Is there a way for us to make it show up again?

They're only writeable if you check them out, as marked by the "Checked out" indicator in the first topic in the top screenshot. The blank line implies "un-Writeable."
Good luck,
Leon

Project Builder Source Control With CVS

DOe anyone know how to setup Project Builder to use CVS for source/version control or is there a good guide I can download?

Hi,
Project builder does not support Source control afak.
Frank

Copying projects in source control

RH10 | WebHelp
We've recently implemented RoboSource Control and I'm hoping someone can tell me how to copy a project that it is already under its control. With each version of our software we need to duplicate the previous version's projects so that we can use them as the basis of the current version.
I had been told that I could open a project from version control to a different folder, remove it from version control, and then add it back into version control to a different folder. This, in theory, should give a duplicate copy. However, the removing from version control bit deletes the original project from version control, not the copy. You then have add both projects back into version control to their respective folders, which is not desirable.
Is there an easier (or correct) way to do this?
Thanks
Jonathan

Thanks for that.
I found an article on Rick Stone's website and, after trying a few different method, it seems like the best way to copy a project. Here's what I did:
1. Open the project you want to copy in RoboHelp, and make sure you ‘get’ the latest set of files from RSC. Close the project.
2. In Windows Explorer, copy the local version of the RoboHelp project to a new folder.
3. Select all the files in the new folder and make sure they are all writable (right-click > Properties > untick Read only > OK).
4. Delete the copy’s <projectname>.cpd and pblsvrs.sss files.
5. Open the copy’s <projectname>.xpj file in Notepad and replace this section:
<miscproperties>
           <matchedpair>
                <name>vc::agent</name>
                <value>MSSCC</value>
           </matchedpair>
           <matchedpair>
                <name>vc::provider</name>
                <value>RoboSource Control 3.1</value>
           </matchedpair>
           <matchedpair>
                <name>vc::database</name>
                <value>NG7EMOTYBUX</value>
           </matchedpair>
           <matchedpair>
                <name>vc::cookie</name>
                <value>$/<project-folder>/<project>@:ROBOSOURCE</value>
           </matchedpair>
     </miscproperties>
With:
        <miscproperties/>
6. Close Notepad and save your changes.
7. Open the copy in RoboHelp – you can now work on the project as if it had never been associated with RSC! – and use the Add to Version Control option to add the copy to its new location in RSC.

Windows Explorer keeps crashing under Win 7 with RH7 and Source Control installed

This is an "informational" thread in case someone experiences the same problems. We installed RH7 on Windows 7 32-bit and accidentally, Robo Source Control was installed, too, although we do not use it. The latter loads three extensions into the shell that caused the Windows Explorer to crash on a regular basis ("Windows Explorer has stopped working"). After deinstallation of Robo Source, the problem seems to be resolved.

I would like to tell you that this problem is an issue with RH8, as well.

Jdeveloper and source control

I'm getting an error when trying to checkout from source control menu Jdeveloper 3.2. I checked the JDK version that Jdeveloper is using. It is 1.2.2, which is correct. Please help!!!! Thanks in advance.
An exception was thrown in the JDeveloper (UK) Source code addin.
The exception was caught and routed to the detailed SCMExceptionHandler.
There were 1 exceptions in the stack. Stack traces are:
===== Exception 0 ============================================
Name:
java.lang.NullPointerException
Message:
null
Stack Trace:
java.lang.NullPointerException
     void oracle.bm.scm.repos.api.RSCReposClientAPI.doCheckout(oracle.bm.scm.framework.splitclient.Options, java.util.List)
     void oracle.bm.scm.framework.splitclient.SCMSplitUIClient$1.go(oracle.bm.scm.framework.splitclient.Options, java.util.List)
     boolean oracle.bm.scm.framework.splitclient.defaultui.SCMDefaultUI$SCMDefaultUIDialog.finish()
     void oracle.jdeveloper.wizard.common.OracleWizardDialog.doFinish()
     void oracle.bm.scm.framework.SCMWizardDialog$CustomizableButtonBar.actionPerformed(java.awt.event.ActionEvent)
     void javax.swing.AbstractButton.fireActionPerformed(java.awt.event.ActionEvent)
     void javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(java.awt.event.ActionEvent)
     void javax.swing.DefaultButtonModel.fireActionPerformed(java.awt.event.ActionEvent)
     void javax.swing.DefaultButtonModel.setPressed(boolean)
     void javax.swing.plaf.basic.BasicButtonListener.mouseReleased(java.awt.event.MouseEvent)
     void java.awt.Component.processMouseEvent(java.awt.event.MouseEvent)
     void java.awt.Component.processEvent(java.awt.AWTEvent)
     void java.awt.Container.processEvent(java.awt.AWTEvent)
     void java.awt.Component.dispatchEventImpl(java.awt.AWTEvent)
     void java.awt.Container.dispatchEventImpl(java.awt.AWTEvent)
     void java.awt.Component.dispatchEvent(java.awt.AWTEvent)
     void java.awt.LightweightDispatcher.retargetMouseEvent(java.awt.Component, int, java.awt.event.MouseEvent)
     boolean java.awt.LightweightDispatcher.processMouseEvent(java.awt.event.MouseEvent)
     boolean java.awt.LightweightDispatcher.dispatchEvent(java.awt.AWTEvent)
     void java.awt.Container.dispatchEventImpl(java.awt.AWTEvent)
     void java.awt.Window.dispatchEventImpl(java.awt.AWTEvent)
     void java.awt.Component.dispatchEvent(java.awt.AWTEvent)
     void java.awt.EventQueue.dispatchEvent(java.awt.AWTEvent)
     boolean java.awt.EventDispatchThread.pumpOneEvent()
     void java.awt.EventDispatchThread.pumpEvents(java.awt.Conditional)
     void java.awt.Dialog.show()
     void oracle.jdeveloper.wizard.common.JDeveloperDialog.show()
     void java.awt.Component.show(boolean)
     void java.awt.Component.setVisible(boolean)
     void oracle.jdeveloper.wizard.common.OracleWizardDialog.setVisible(boolean)
     boolean oracle.bm.scm.framework.SCMDialog.showPanel(javax.swing.JPanel)
     void oracle.bm.scm.framework.splitclient.defaultui.SCMDefaultUI.showDialog(javax.swing.JPanel, java.lang.String, oracle.bm.scm.framework.splitclient.APIRunner)
     void oracle.bm.scm.framework.splitclient.defaultui.SCMDefaultUI.displayCheckoutUI(oracle.bm.scm.framework.splitclient.Options, borland.jbuilder.addin.Node, boolean, oracle.bm.scm.framework.splitclient.APIRunner)
     void oracle.bm.scm.framework.splitclient.SCMSplitUIClient.checkout(borland.jbuilder.addin.Node, boolean)
     void oracle.bm.scm.framework.splitclient.SCMSplitUIClient.checkoutContents(borland.jbuilder.addin.Container)
     void oracle.bm.scm.framework.SCMManager$8.run()
     void javax.swing.SystemEventQueueUtilities.processRunnableEvent(javax.swing.SystemEventQueueUtilities$RunnableEvent)
     void javax.swing.SystemEventQueueUtilities.access$0(javax.swing.SystemEventQueueUtilities$RunnableEvent)
     void javax.swing.SystemEventQueueUtilities$RunnableTarget.processEvent(java.awt.AWTEvent)
     void java.awt.Component.dispatchEventImpl(java.awt.AWTEvent)
     void java.awt.Component.dispatchEvent(java.awt.AWTEvent)
     void java.awt.EventQueue.dispatchEvent(java.awt.AWTEvent)
     boolean java.awt.EventDispatchThread.pumpOneEvent()
     void java.awt.EventDispatchThread.pumpEvents(java.awt.Conditional)
     void java.awt.EventDispatchThread.run()

Hi,
Could I ask for a bit more information about your environment so that I can either track down the problem or provide a workaround:
o Which specific version of Repository are you using?
o Which version of Windows?
o Does the workarea you're connecting to have a check-in branch set? (if you use Edit workarea... in the RON, check the Checkin branch page, and let me know if it's set to <None>).
I'll also have a look back at the 3.2 code when I'm back in the office tomorrow to see if I can find out what's causing the exception.
About the indication of status: this is one area where JDeveloper 3.2.3 is quite limited. The underlying addin API we use to integrate source control into 3.2 didn't have the flexibility we needed to display a state indicator in the navigator (in 9i, it's a whole lot more flexible, and we have very nice "overlay" icons that tell you what state a file is in). The only way to tell if a file is checked in or out in 3.2 is by looking at the Source Control menu for the file to see which items are enabled / disabled.
Thanks,
Brian
JDev Team

How do you export logic projects, and into soundcloud without ruining any quality?

I export a song, and it lost alot of volume. I found a way around that by adding adaptive limiter to the entire mix. It helped alot. Now I post it to soundcloud and then some of the instruments quality degrade. And when i play it in iTUNES or even the finder window, it is how i want it to sound. When I hear it on soundcloud, its quality and volume degrades. Is there a way around this???
please help! Thanks!

Just to clarify before I make any suggestions is that what most DAWs call exporting isn't called exporting in Logic, it's called Bounce. If you use the export command in Logic it will give you seperate WAV files for each track and .midi files for any midi tracks you have in your project. The Bounce command is right below the export command in the file menu, though.
The settings you choose when bouncing really depends on your preferences and how big of a file you care to have. If you have no mastering or mixing left to do you should choose PCM saved as WAV or AIFF (I'm honestly not sure of the pros and cons of the two), but you can bounce the project as more than one file format at once so you don't really have to choose only one.
If you bounce to an MP3 go ahead and choose the highest settings which I believe is 320CBR (320 constant bitrate). You can also bounce as AAC, which I prefer because Apple Lossless results in a fairly small file (compared to WAV) while maintaining good quality. You can also manage the file's metadata from this menu so your ID3 tags are good to go.
Like I said it's really up to your preferences and what you are going to use the file for.

Export FCP project and linked media assets

Sorry everyone, I know this is an easy question but I have searched for the answer and am still very confused. I want to save my FCP project and just the appropriate used media assets in one place so I can send a condensed version of my entire project to someone to further edit. I know there is an easy way to do this because I have done this before, but I can't remember.
I was confused because I found a number of answers but some of them talked about how afterwards the media files will no longer be able to be tracked by the Final Cut Server? This is what scared me.

Use FCP's Media Manager to duplicate the project media. Be sure to include handles if needed.
-DH

Steps to export B2B Project and Source Control.

Similar Messages

Maybe you are looking for