Steps to publish ABAP WS externally

Requirement:- Need to provide everyone an Adobe form in offline manner in order to apply for Job positions and when they click on Submit data inside the form, all the data should go to ECC.
Solution: To implement this requirement we have developed Adobe form and created a custom BAPI which will update the ECC. Using inside-out approach we have exposed the BAPI as custom WS and done the technical settings in SOAMANAGER transaction. Right now its working fine, as we are checking from within the network.
Problem : Now since everyone should be able to access this WS, it's necessary to publish it to a UDDI I believe. Since we are on ECC 6.0 (w/o any EHP) we do not have any Service Registry where we can publish it. We do not have PI as well. The SAP UDDI uddi.sap.com does not open.
Can someone please guide as to what will be next steps in order to publish this WS externally so that its available for everyone.
Chintan

Hi Chintan,
So without exposing the server outside the firewall, how can I publish it online so that everyone can download the form and submit the data.
From what I see here, by "publish" you mean "make the application (Web service) available to the public so that everybody can use it."
In the context of Web services and UDDI, "publish" has a different meaning. In short, when you develop a Web service you make it available on some system and configure it. What you have now is:
(a) The Web service as an application which the user can use.
(b) The information about this Web service, that is, where it is available, what it is about, an so on.
The UDDI server is intended to store (b) and not (a). The process of storing (b) in an UDDI server is called "publishing". By "publishing" the Web service to the UDDI server, you actually make the information about this Web service available in the UDDI server. Then other users can access the UDDI server and find information about your Web service. If they decide to use your Web service, they take from the UDDI server the information about how to access it.
To summarize, the UDDI server is just a kind of registry, or yellow pages. While you can "publish" Web services in it, you will find there only what they do and how to access them.
Hope this helps,
Rossen

Similar Messages

What are the steps for publish applications WD ABAP in the portal

Dear Experts.
The developers created an appplications WD ABAP. And my work is publish this development in the Portal of ESS.
Anyone can help me with the steps for publish the development(applications WD ABAP) in the portal.
Thank in advance for your help,
Best Regards
Carmen.

Hi ,
Please follow the below links for creating ABAp web dynpro iview in portal.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1d/e4a34273f60b31e10000000a1550b0/frameset.htm
http://www.sapdev.co.uk/sap-webapps/sap-portal/iview-wdp.htm
Also you have to ensure that the system is created in portal and also check the system connectivity with backend.
You need to select this system while creating iview.
The below links will help you to create systems in portal.
http://wiki.sdn.sap.com/wiki/display/EP/11Systems-+Creation
http://wiki.sdn.sap.com/wiki/display/EP/SystemCreationin+portal
http://wiki.sdn.sap.com/wiki/display/EP/HowtoCreateSystemObjectinthePortalforConnectingtoSAPbackend+System
Hope these will help you.
Regards,m
Sandip

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Steps to export iPhotos to external HD

steps to export iPhotos to external HD, please ? thanx

Very vague question...
There's no such thing as "iPhotos". There's an iPhoto app, there's an iPhoto Library, the Library contains photos.
You can move the Library to an external drive.
You can export individual photos from the Library to an external.
But what you want to do is not clear.
To move the Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
To export the Photos:
File -> Export
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Regards
TD

What is the first step of an abaper after getting the FDS

what is the first step of an abaper after getting the Functional Document ?what we have to do? how to analyze it , and how to face such interview questions on FDS TDS . any resource available.

Hi,
After getting the FDS , first understand the functionality of the requirment or take the help of the functional consultant and then start preparing TS ( TEchnical Specification) and do coding and get your doe reveirewed and prepare test cases and do testign in sand box and quality environment and after having got the confrimation that the requirment is met then port it to production.
Regards,
Irfan
Note: Please award helpful answers.

Publishing Website to External Server

Hello,
I am used to creating websites in html code in a windows based program, So I have paid for a domain and server space.
I now want to use a sub domain as a personal web page, But I want to use iWeb because it is quick, easy and i can do it on the go.
Can I not publish to my external server from iWeb??

You can't publish to your server directly from iWeb. First you have to publish to a folder (from iWeb File menu). Then you get what you're used to see: HTML files (and Folders,...). Upload those resulting files to your server as you're used to do: using an FTP application.
You maybe want to have a look at this page as well:
http://iwebfaq.org/site/iWebFolderFTP.html
especially Chapter 3.1)
Regards,
Cédric
+“I may receive some form of compensation, financial or otherwise, from my recommendation or link.”+

What are the steps to optimise ABAP code

What are the steps to optimise ABAP code, that is how to increase the performance of a code?

Hi
Welcome to SDN forum
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
<b>Reward points for useful Answers</b>
Regards
Anji

Is there doc for the exact steps to publish to iOS?

I am looking for the EXACT steps for publishing to iOS. the Xcode doc talks about "making an archive" but that doesn't seem to work because it is specific to apps made entirely in Xcode. I can get the IPA to an iPad or iPhone attached to the Mac but that's it. certainly I could FEDEX a device to somebody else for them to see it but no, that is not a solution.
this link (Publishing to iOS devices using Director 12) does NOT have enough information. there are steps missing. for example if you make a Provisioning file on developer.apple.com that version will fail showing a yellow icon when dragging it to the Organizer.
maybe there is a link that I am missing. please help.

Hello webdesignsf,
I’m in the same situation as you – I’m just about to finish my first iPad app, and will be submitting it to the Apple iStore very soon.
( Can someone please verify this procedure below )
As soon as I figure it all out, I’ll write down the steps.
regard Milky.
In the meantime, I’m guessing…..
Get a distribution certificate & make a distribution provisioning profile
Create icons and screen shots
(??? maybe - Setup for embedded icons – edit the info.plist to reference a unique icons - see the bottom of this message for more info ???)
Make your .ipa file with Director 12 (using the above distribution certificate – provisioning profile)
Change the extension of your .ipa file – from .ipa into a .zip (you just rename the file!)
Unzip this .zip file – (this will create a folder called ‘Payload’)
Find the ‘Payload’ folder – inside you’ll now see a .APP file!
Highlight this .APP file – and with the right mouse button - select ‘Compress’
(This will convert the .APP file into a .zip file – this is what Apple calls a binary file)
Navigate to the iTunes Connect area of the iOS Dev Centre
Download and install the ‘Application Loader’ utility from the iOS Dev Center - (I think is's now a part of xCode too!)
Go to the Manage Your Apps page and click 'Add New App'
Fill out the forms describing your company and application
When asked upload the icons and screenshots
Save the app description
Back on the Manage Your Apps page, select the app description you just created, and click the Ready to Upload Binary button
Fill out the Export compliance form
Your app should now be in a ‘Waiting for upload’ state in the manage your apps page
Now use the Application Loader utility to upload your binary file.
Other Notes:-
There is a whole list of recommendations for getting apps approved by Apple - I'll write these down one day.
make sure your app is as small as you can get it, and make sure it’s fast to load up the first screen (3 seconds or less)
http://www.adobe.com/devnet/flash/articles/app_store_guide.html
Guide for Apple App Store submissions | Adobe Developer Connection
There are loads of youTube videos that show submissions to the app store with other development systems,
but they are mostly the same, when it comes to setting up the distribution certificate etc...
http://www.youtube.com/watch?v=D4iPyGyrhcM
Uploading your GameSalad game to Apple - YouTube
Setup for embedded icons:-
Submitting icons and screenshots is a part of the app submission process.
But you may need to create a Director made ‘ipa’ file, with unique icons already embedded first ??? I just don't know yet???
(pallottadesign) wrote some instructions regarding this way back in May 2013 – I don’t know if this step is needed anymore – but I added it here in case....
Re: director 12 IOS publishing icon plist
pallottadesign May 1, 2013 6:17 AM (in response to ralph2511)
Editing a separate info.plist to reference your app icons is actually a better approach than altering the defaults within Otto.app.
The procedure is simple:
Put your unique app icons in the same folder as your Director file. You can name these icons whatever you wish, or name them the same as the defaults in Otto.app, i.e. "projector_72x72.png" and "projector_57x57.png", or you can give them unique names.
Copy the info.plist file to the same folder as your Director file.
If you have given your icons unique names, open the info.plist file in Xcode and find the "Icon files" key. Edit "Item 0" and change the entry to the name of the 72x72 pixel png icon. Edit "Item 1" and change the entry to the name of the 57x57 pixel png icon.
Save the info.plist file.
Within Director, open Publish Settings and in the "Files" tab, enable "Copy linked and dependent files." Click on "Add Dependent Files" and navigate to the folder with your unique icons. Select each one and make sure that the radio button is checked for each one.
In the iOS tab, select the "Info Plist Path" option and navigate to the location of your edited info.plist. Select the info.plist file in the dialog box and click "Choose."
Publish your iOS app and test. The icons should now have been embedded within your iOS app bundle.
You may be able to put the icons in an "images" folder within your app folder structure, but you will still have to use the "Copy linked and dependent files" and "Add Dependent Files" options to have that folder and the icons bundled within your iOS app.
If you intend to develop apps for the app store, you may need additional icons at larger sizes.
For reference: http://developer.apple.com/library/mac/#documentation/FileManagement/Conceptual/FileSystem ProgrammingGUide/FileSystemOverview/FileSystemOverview.html
and for icons:
http://developer.apple.com/library/ios/#documentation/userexperience/conceptual/mobilehig/ IconsImages/IconsImages.html

Excute workflow from step 3 by abap code

hI,
i want to excute workflow from step 3 by abap program. My workflow send mail from approval at 3 step.When approval is made then it will go for further processing.
please give me code if possible.
Regards,
Gurprit
Message was edited by:
GURPRIT BHATIA
Message was edited by:
GURPRIT BHATIA

hi Guprit,
based on my experience you must trace why your workflow is wait.
is it because the workflow is waiting for certain events ?
or is it because of an error occured in the step 3 of the workflow ?
if the worfklow is waiting for certain events, you can force it to continue with triggering the events that workflow wait ( transaction code SWUE )
if an error occured in the step 3 of the workflow, you need to trace it what kind of error .... and for certain case after you fix the error you can continue the workflow by using tcode SWPR and restart the workflow after error.
but unfortunatelly based on my experience, some times the workflow just stuck in the middle of the process and no error occured
it this happens, ussually i re-triggered the workflow
hopes it helps
cheers

Steps for creating abap query

hi sap gurus,
can i steps for creating abap query
plz help me on this.
regards,
balaji.t
09990019711

Hi
Please check this link for a document on ABAP query. It explains the process step by step with screen shots..
http://www.auditware.co.uk/downloads/SAPQuery_step_thru.pdf
Thanks,
Ravi

How in ABAP do you develop a class to publish an event externally

Hi all,
I am trying to publish equipment information to multiple systems using ECC 6.0 and PI 7.1
Here are two articles which I have read which were very useful
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/800e2826-718c-2a10-f680-d6b29f0dce18
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0334534-aa28-2b10-a3a2-9ed4135727ed
High level overview of what I've done is as follows.
PI
- I developed a generic Service Interface called Asset_Sync and mapped this to a non SAP backend system to persist the equipment information (this all works fine).
- I also published the Sender Agreement for Asset_Sync to ESR
ECC 6.0
- I generated a client proxy ZEFI_CO_ASSET_SYNC from the ESR entry for Asset_Sync
- I used transaction SWF_BAM and have created an event linkage for object type EQUI event Changed
Here is where I am stuck
I now need to define the Proxy object to publish the equipment information to PI.
I am not sure if I have to extend the object EQUI to ZZEQUI and whether I need to create a method execute-synchronous.
I am really looking for some sample code of how to create the Proxy object and link it to the event.
Regards,
John
P.S.
I have coded a test program which calls the proxy and sends the information to PI and then to the third party system it looks as follows and works fine, it is just a shell right now once I have finished linking it to the event I will enhance the message interface and pass real values (for now my mapping in PI just hardcodes enough data so the publish to the back end system works). Basically althugh this works I need to execute this automatically from the event being triggered and hence need to move this into a proxy with event linkage.
FORM CREATE_ENTITLEMENT .
DATA: lv_assset_sync_req TYPE ZEFI_ASSET_SYNC_REQUEST,
        lv_assset_sync_resp TYPE ZEFI_WSRESPONSE1.
CREATE OBJECT lv_asset_sync_proxy
    EXPORTING
      LOGICAL_PORT_NAME = 'ASSET_SYNC_DX3'.
*TRY.
*TRY.
CALL METHOD LV_ASSET_SYNC_PROXY->ASSET_SYNC
EXPORTING
    OUTPUT = lv_assset_sync_req
IMPORTING
    INPUT = lv_assset_sync_resp.
Write :/ 'Status : ', lv_assset_sync_resp-WSRESPONSE-STATUS.
WRite :/ 'Code : ', lv_assset_sync_resp-WSRESPONSE-CODE.

Hi all,
I thought I'd give an update.
After reading a number of articles and documentation (see below).
It appears it may be easier to create a new class using SE24 rather than extending the Business Object in SWO1.
I've done the following which works via a user-exit.
a.     Create Class ZZEQUI
b.     Create an Instance Dependent Object to Publish the Entitlement
c.     Leverage User Exit MV50AFZ1 - FORM USEREXIT_SAVE_DOCUMENT_PREPARE
d.     Created Include ZSDI_DELIVERY_PUBLISH
i.     Loops through serial numbers
ii.     Create Object LV_ASSET EXPORTING EQUNR = LV_EQUNR
iii.     CALL LV_ASSET->Publish.
If I add the Interface IF_WORKFLOW to my class then I may be able to be trigger it from SWF_BAM.
The solution I have is working, if I decide to go with BAM and have additional questions I'll raise this in either the workflow or ABAP Objects forums.
Regards,
John
Addtional articles and documentation
i.     Business Object Macros http://help.sap.com/saphelp_nw04/helpdata/en/c5/e4ad23453d11d189430000e829fbbd/frameset.htm
ii.     Integrating Abap Objects with Workflow http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0409e6c-d213-2d10-3cb6-c12d417626c1
iii.     Why Use ABAP OO with workflow /people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
iv.     ABAPOO for WUG http://wiki.sdn.sap.com/wiki/display/HOME/2.Designand+Development#2.DesignandDevelopment-HowcanIuseABAPOOClassesinWorkflow%3F

Publishing ABAP WebServices to an Internal UDDI Server

Our Requirement is to create a Web Service from one of the Function Module and publish the same locally(i.e., one of our internal server itself). After published our dotnet team want to access these webservice from dotnet to get the functionalities used in these web service.
We are using a seperate ABAP and JAVA System. Is it possible to create a webservice and publish the same locally.

I try to create from se37. But the problem is my SAP J2EE Engine's release is 7.00. Services Registry is a java component and Not part of NW 7.00 Stack. Services Registry is delivered with 7.10 SP4.
So I would like to know the step by step procedure for creating web service which suites my current release(7.00)

Can someone indicate step by step how to connect my external hard drive to my Macbook Air as additional storage and memory?

I have a WD My Passport for Mac. I have it into two partitions one formatted into Mac OS Extended (Journaled) and the other one formatted into exFat. I don't really know where to go from there. I would love it if somebody could help me with a step by step process.

Have you connected the WD external HDD to your MBA with the USB cable? It should be displayed on your desktop. If not, check the settings in Finder Preferences.
Once it is connected, click on the icon and a window will open showing what ever data you have on it. The same procedures apply as with the internal storage of the MBA.
Some WD HDDs come with their own software which may create unnecessary problems with your OSX. You may have to get rid of that.
Ciao.

Error when connect from portal system (abap ) to external ssl client - sm59

Hi I am tryign to setup a ssl connection from the abap sm59 portal system to an exteral server.. I have setup the certs that the client has given me in strust.but i m gettign the ffg error.
sysno      60
sid        PID
systemid   370 (Solaris on SPARCV9 CPU)
relno      7110
patchlevel 0
patchno    150
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    /usr/sap/PID/SYS/profile/PID_DVEBMGS60_pidevdb
pid        3911
[Thr 01] Thu Jun 14 08:38:48 2012
[Thr 01] TRACE FILE TRUNCATED
[Thr 07] Thu Jun 14 08:39:07 2012
[Thr 07] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 07]    session uses PSE file "/usr/sap/PID/DVEBMGS60/sec/SAPSSLA.pse"
[Thr 07] SecudeSSL_SessionStart: SSL_connect() failed
[Thr 07]   secude_error 536871970 (0x20000422) = "SSL record with the wrong SSLPlaintext.version received"
[Thr 07] >>            Begin of Secude-SSL Errorstack            >>
[Thr 07] ERROR in ssl3_get_record: (536871970/0x20000422) SSL record with the wrong SSLPlaintext.version received
[Thr 07] <<            End of Secude-SSL Errorstack
[Thr 07]   SSL_get_state() returned 0x00002120 "SSLv3 read server hello A"
[Thr 07]   SSL NI-sock: local=57.24.111.151:34110 peer=57.24.110.116:5081
[Thr 07] <<- ERROR: SapSSLSessionStart(sssl_hdl=10720d530)==SSSLERR_SSL_CONNECT
[Thr 07] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00020a7c} [icxxconn_mt.c 1957]
When i change the sm59 connection not to use ssl. it give me a pop up screen . and asks me to enter user and password...
He then give me a private key file .. i.e a .pfx file but not sure how to load this in strust. I tried to convert in useign sapgenpse. but it fails with teh ffg error
12% sapgenpse import_p12 -p /usr/sap/PID/amos/amos_client.pse /usr/sap/PID/amos/amos_client_pk.pfx
import_p12: MISSING password for PKCS#12 file "/usr/sap/PID/amos/amos_client_pk.pfx"
Please enter PKCS#12 encryption password: *******
PKCS#12/PFX file contains 1 keypair:
1. FriendlyName = "amos.server.interface.webuser.web_int.cert"
     X.509v3 (type=Both) RSA-2048 (signed with sha1WithRsaEncryption)
     Subject="CN=AMOS WebService Interface Client, OU=IT&S MRO, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
     Issuer ="[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"
ERROR: Incomplete certification path -- NEED certificate of "[email protected], CN=ca.flysaa.com, OU=Certificate Authority, O=South African Airways (Pty) Ltd, L=OR Tambo International Airport, SP=Gauteng, C=ZA"!
I have attached a doc of what it looks like.. appreciate any help

Hi,
There is an error in the publishing of template
Template :"bbpsc02" is not publised in ITS.
Go to T.code: SE80
Publish all the templates again and check
Check with your SAP BASIS team for the help
Regards
Ganesh

Step by step Installation ON ABAP,XI,Web dynpro ABAP and JAVA On my PC??

Hello Friends,
I would like to Install SAP-ABAP ,XI ,Web dynpro ABAP and Web dynpro JAVA on my PC.
Please Let me know What configuration is required for all the above.
Please Give me the Step by step procedure for all the above.....??
I want to Instal all the above and Give me suggestion on that???
Can I use Vista for Sap Installation????
It would be great If you send the step by step procedure to my personal ID
[email protected]
Thanks in Advance
Preethi D

Hi,
Step step description here is not possible.
It always advisable to go to service.sap.com/instguides.
slow and steady wins the race.
good luck.
It's advisable to have quad processor with atleast 8GB ram.
If it's a nw04s then at a shot you can select AS ABAP. JAVA, EP, PI(XI) and proceed.
hope this helps you.
reward suitable points.

Steps to publish ABAP WS externally

Similar Messages

Maybe you are looking for