Stereo preset for 3D Objects

The stereo preset for 3d objects does not really work very well with the glasses I have. I am using the shrek glasses which I thought were blue and red, but they may be cyan and red.
Is there a way to change the preset colors for this property or anywhere I can download other stereoscopic render settings?

These are built-in features that cannot be edited. However, you shoulkd be able to tweak the exact spectrum of the colors with a simple adjustment.
Mylenium

Similar Messages

Is there a way to create a preset for drop shadows?

I'm setting up a template for a new brochure that will need drop shadows on every product that is being placed. Is there a way to save a preset for a drop shadow so I need not have to recreate the shadow every time? Also this is being distributed to many people to work on and effects presets would be hugely beneficial-just not sure if that is possible? Although it is Indesign, and they are usually on the up and up for this kind of thing.
Thanks!
FF

The Eyedropper Tool is a quick way of applying the same drop shadow to many objects
But as peter says object styles is a much simplier way.

Soundbooth CS5: Effects and/or rack presets for 5.1 audio?

Hi,
Are there any Soundbooth CS5 effects and/or rack presets (either Adobe or third-party) for working with 5.1 audio? I have effects and presets for both mono and stereo, but none show up for 5.1 files.
Best,
Chris

Hi Shawn,
I understand, but at least with stereo files I can add an EQ, compressor, etc. that applies to all (both) channels. Is there not a similar capability for 5.1 files? I don't so much need per-channel editing (I can always split the channels out to separate files in that case), but basic EQ/compression is really what I'm looking for.
Best,
Chris

Assistance Setting Presets for Exporting to .FLV

I need assistance in customizing the presets for exporting a file to .flv format. Here is what I need Abode to export TO:
.flv
320x240
4:3
800kbps
29-97 fps
audio - 44 khz 66kbps stereo

Jesse_Martinez(Calvary)
Your requirements are stated as
.flv
320x240
4:3
800kbps
29-97 fps
audio - 44 khz 66kbps stereo
You can accomplish nearly all in Premiere Elements 12, but there is a problem achieving the exact audio sampling rate/bitrate combination that you list.
In Premiere Elements 12, go to Publish+Share/Computer/Adobe Flash Video and select Presets = FLV - Web Large NTSC Source (Flash 8 or Higher) On2VP6 MP3 FLV
Under the Advanced Button/Video Tab, make adjusts
Remove the link between Frame Width and Height and type in
Frame Width = 320
Frame Height = 240
Bitrate = 800 kbps (kilobits per second)
Under the Advanced Button/Audio Tab, make adjusts
Output Channel = Stereo
Bitrate Settings - now here is where it get tricky...there is no set for sampling rate/frequency = 44 KHz or other. And, there is no audio bitrate of 66 kbps (closest is 64 kbps), There appears to be a sampling rate associated with the export, but viewable once you have the export and look at its properties in a program such as MediaInfo.
Here is what I found
if the audio bitrate = 64 kbps, then the sampling rate is 22.05 KHz
if the audio bitrate = 80 kbps, then the sampling rate is 22.05 KHz
if the audio bitrate = 96 kbps, then the sampling rate is 44.1 KHz
if the audio bitrate = 128 kbps, then the sampling rate is 44.1 KHz
Are there trade offs for you or must you have those exact values that you posted?
H.264 AAC F4V
If you were to export your Timeline as F4V, then you would have the opportunity to set sampling rate 44.1 KHz and bitrate 64 kbps.
We can discuss other not mentioned settings later once we have worked through the core ones.
Please review.
Thanks.
ATR

Ability to save presets for FX tools

...if I'm working on a project and need to recreate various 3d-ish icons, I need write them down on paper. presets for as many things as possible is highly desired by everyone. Especially the 3D extrude & Bevel FX as I use this rather frequently.

Graphic Styles can store application of 3D Effect as it can other live effects. If you want only the 3D Effect to be stored in the Style, first Group the object to which you apply the 3D Effect. Then use the Group's Appearances to define the Graphic Style.
JET

Default Stereo Preset

When I put my video into the timeline, only one track has a source button, and only one sound track.
When I go to the User Preference, the Default Stereo Preset only has a total output of 2, but has 0 mono Outputs and 1 Stereo Output.
How do I get two Source Buttons on the audio tracks? Do I have to change the Stereo Preset?
Any suggestions?
Hank Kearns

Well this is all odd - the stereo preset is for
output not in...
You're capturing this material from DV which has two
tracks recorded? can you see meters or something in
the log and capture window or on the camera's on
screen display that show both tracks are recording?
are you using a single mic or stereo mic?
////No way of telling. My camera is not a professional model, it is a Canon ZR500.
You are using the DV NTSC capture preset right?
///Yes, that is the setting in the Audio/Video Settings.
the
one that's locked? if so, trash your preferences and
try another capture.
///I trashed my preferences, and will attempt another capture when I get home later tonight.
Even if you've only recorded on
one track (possible for sure) you should still get a
two track capture with one of them containing no
audio...
// This is frustrating. Thanks for taking the time to respond.
Hnak

How do you establish presets for style menu?

How do you establish presets for style menu? Have not seen a tutorial or any support.

1. Create the style you want. (in this example I created a red box with a shadow and a bevel. (example 1)
2. With the object still selected, go to the Graphic Styles menu.
3. Click on the small square icon to create a new style. (example 1, green box)
4. Muse will create a new style called Style in the menu area.
5. Click on the word Style to change the name to something more appropriete, click OK. (example 2)
See examples attached.
1
2

Unable To Use DVDSP4 Presets for HD-DVD in the H.264 Format

I recently prepared a 23 minute slide show using Fotomagico from high resolution Hasselblad slides scanned in at 1200 dpi. Within Fotomagico I rendered the Fotomagico slide show to Apple ProRes 422 HQ, took it into Final Cut Pro 6.03 and added an intro and closing section. I then sent this to Compressor and selected the 30 minute HD-DVD preset which uses mpeg2. All went fine with the encoding to mpeg2 and I got a successful build and format out of DVDSP4 after importing the resulting .m2v file into DVDSP4. However, while the disk plays back fine in my Mac Pro it plays back with stuttering (audio and video) on my Toshiba HD-A2 HD-DVD player. I used a Verbatim Datalife DVD+R, but several other discs from other manufactuers including a DVD-R disc showed the same problem.
Please note that I have the latest firmware on my Toshiba HD-A2 and I have successfully burned RL HD-DVD discs using my PC and Windows software (Ulead's DVD Movie Factory 6+) which play fine without stuttering on my HD-A2.
I then decided to send the project to Compressor and use the 60 minute HD-DVD preset that encodes to H.264. Once again Compressor successfully executed the encode of my 23 minute slide show and it plays fine in QuickTime or MPEG StreamClip. However, every time I try and import this .mov file encoded in H.264 using the Compressor preset for HD-DVD into DVDSP4, DVDSP4 brings it in to the assets folder, but after a couple of seconds DVDSP4 crashes. Using console I get a message that DVDSP4 quit unexpectedly due to a "segmentation fault".
I also tried to take the ProRes Fotomagic project in Final Cut Pro 6.02 and send it out with Quicktime Conversion using the H.264 codec. Again I have a file that plays fine in QT, but when I try and import this .mov file into DVDSP4, I get the message "imcompatible format".
In summary, I am completely frustrated after many many hours of work at trying to prepare an HD-DVD on red laser of my slide show in DVDSP4. I cannot figure out what I am doing wrong, and I would be most appreciative of any suggestions anyone may have.
Thanks in advance.
Tom

Am I the only person who has ever tried to use the Presets in Compressor 3 for encoding HD-DVD disks? I would like to use these presets for burning HD-DVD's to standard red laser media as I have done on my PC. With the mpeg2 Preset I can get nothing but stuttering video when played back on my Toshiba HD-A2 and when I use Compressor 3 to encode with either of the H264 presets, the resulting .mov file causes DVDSP4 to crash when I import the file. Has no one else experienced this? Does anyone have any thoughts on addressing these issues other than to go back to working on my PC?
Tom

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

Bulk API V2.0 Data extract support for additional objects (Campaign,Email,Form,FormData,LandingPage)?

allison.moore
Any plans for adding following objects under Bulk API V2.0 for data extraction from Eloqua. Extracting the data using the REST API for these objects makes it complicated.

Thanks for quick response. Extracting these objects using REST API in depth=Complete poses lots of complication from the code perspective since these object(s) contains multiple nested or embedded objects within it. is there any guideline on how to extract these objects using REST so that we can get all the data which is required for analysis/reporting.

Exporting and Importing Statistics for Schema objects.

Hello All,
I am trying to gather stats for optimization using, gather_schema_stats for all objects under schema. The manual what i am reading says it covers both Tables and Indexes and we can also include the all partions too. For the safety reasons i was informed by a friend that we should take a back up of old stats into a table (user defined), so as in case of messing up with new stats for performance issue we can use it as an backup copy. So, i have created a user table and exported the stats from existing schema. My Question is, do i have to create one for the indexes too. Or its all in one table. I hope my question is clear.
Generally manuals don't teach all this kind of stuff until unless we learn it by ourselves by trial and error Or getting solutions from great resolvers like you people.
Hope to hear soon.
Thanks in Advance.

One table for table and indexes stats is enough, a little test for you :
SCOTT@demo102> exec DBMS_STATS.CREATE_STAT_TABLE('SCOTT','MYTBL');
PL/SQL procedure successfully completed.
SCOTT@demo102> desc mytbl
Name                                      Null?    Type
STATID                                             VARCHAR2(30)
TYPE                                               CHAR(1)
VERSION                                            NUMBER
FLAGS                                              NUMBER
C1                                                 VARCHAR2(30)
C2                                                 VARCHAR2(30)
C3                                                 VARCHAR2(30)
C4                                                 VARCHAR2(30)
C5                                                 VARCHAR2(30)
N1                                                 NUMBER
N2                                                 NUMBER
N3                                                 NUMBER
N4                                                 NUMBER
N5                                                 NUMBER
N6                                                 NUMBER
N7                                                 NUMBER
N8                                                 NUMBER
N9                                                 NUMBER
N10                                                NUMBER
N11                                                NUMBER
N12                                                NUMBER
D1                                                 DATE
R1                                                 RAW(32)
R2                                                 RAW(32)
CH1                                                VARCHAR2(1000)
SCOTT@demo102> create table mytable_obj as select * from all_objects;
Table created.
SCOTT@demo102> create index myindex on mytable_obj(object_id);
Index created.
SCOTT@demo102> exec dbms_stats.gather_table_stats(ownname=>'SCOTT',tabname=>'MYTABLE_OBJ',cascade=>true);
PL/SQL procedure successfully completed.
SCOTT@demo102> select last_analyzed from all_tables where table_name='MYTABLE_OBJ';
07/06/06
SCOTT@demo102> select last_analyzed from all_indexes where table_name='MYTABLE_OBJ';
07/06/06
SCOTT@demo102> exec dbms_stats.export_table_stats('SCOTT','MYTABLE_OBJ',stattab=>'MYTBL')
PL/SQL procedure successfully completed.
SCOTT@demo102> exec dbms_stats.delete_table_stats('SCOTT','MYTABLE_OBJ');
PL/SQL procedure successfully completed.
SCOTT@demo102> select last_analyzed from all_tables where table_name='MYTABLE_OBJ';
-->No value
SCOTT@demo102> select last_analyzed from all_indexes where table_name='MYTABLE_OBJ';
-->No value
SCOTT@demo102> exec dbms_stats.import_table_stats('SCOTT','MYTABLE_OBJ',stattab=>'MYTBL');
PL/SQL procedure successfully completed.
SCOTT@demo102> select last_analyzed from all_tables where table_name='MYTABLE_OBJ';
07/06/06
SCOTT@demo102> select last_analyzed from all_indexes where table_name='MYTABLE_OBJ';
07/06/06
SCOTT@demo102> Nicolas.

How to use the index method for pathpoints object in illustrator through javascripts

hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..

Hi, what are you trying to do with path points?
CarlosCanto

How to set change mode as default for workbench objects

Hi experts
I've always wondered if there is a configuration option in NW BW 7 where it can be set whether double clicking a workbench object will show the maintenance screen for that object in change or display mode (default is display). Because is annoying to have to set edit mode every time one double click a workbench object in the development system, and as it is a development system, it would make sense to have edit mode by default instead of display
I was thinking that it may be related to the client role, but who knows...
I appreciate your help
regards

Not sure where this can be set...if anywhere.
But how about this for a workaround: Right click the object in RSA1 and the select Change instead of Display.
That would save you a click if I counted correctly

How to build sql query for view object at run time

Hi,
I have a LOV on my form that is created from a view object.
View object is read-only and is created from a SQL query.
SQL query consists of few input parameters and table joins.
My scenario is such that if input parameters are passed, i have to join extra tables, otherwise, only one table can fetch the results I need.
Can anyone please suggest, how I can solve this? I want to build the query for view object at run time based on the values passed to input parameters.
Thanks
Srikanth Addanki

As I understand you want to change the query at run time.
If this is what you want, you can use setQuery Method then use executeQuery.
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/oracle/jbo/server/ViewObjectImpl.html#setQuery_java_lang_String_

How to create a preset for computer output of 1024x768?

I just upgraded from Premiere Elements 1.0 (yes, 1! :) ) to PE7. I record user group meetings for my local software developers group. We have screen capture at 1024x768 pixels and audio.
In PE1 I had no trouble bringing this footage in, editing it and exporting it as 1024x768 for viewing online by the members.
However, I can't seem to find anyway to create a project preset for 1024x768. It seems I can only create SD, HD and similar.
When attempting to create a custom preset 90% of the values are pre-filled with settings and I can't change them. I see textboxes for the height and width but I can't change them.
Is this a limitation of PE7? Why in the world can I not create a video any size I want? Without this ability the upgrade is almost useless to me.
Please let me know because I feel like I must just be missing something.
Thanks!
Matt

Hey Steve,
Thanks for the reply.
I did see the 720p preset and this does produce a nice image. The SD preset made the output look muddy and the screen text was unreadable.
That being said, when importing my media into a project on the 720p preset I get the black letterbox bars on the side.
I did render a 10 second test area and changed the output size to 1024x768. I was afraid it would squash the entire video, but much to my surprise it just cropped it. So, while I have to work with the letterboxing I can output an actual 1024x768 video. I was also having a little trouble because I was using File - Export Movie to, well, export my movie. When I tried the Share task, set it to PC and changed the settings this was much easier and produced a much better result.
Thanks for the help!
FYI, I use PE7 to export it as a wmv. I'm playing with Expression Encoder to then encoded this with VC-1 for Silverlight clients.

Stereo preset for 3D Objects

Similar Messages

Maybe you are looking for