Stickies help.

I need to restore my stickies. Not the dashboard, the other ones from the app. Does anyone know where that file is located? I have a lot of notes and I use it a lot. It is somewhere on my Time Machine drive but I have no idea where. I have Time Machine off so I can go rooting through it for the file.
Please help as I am desperate.
Paul

Your comment about Dashboard has me confused, but if we are talking the data on the coloured notes opened by the Stickies app I believe you need to restore the file called StickiesDatabase in ~/Libary.

Similar Messages

USB STICK HELP!!

hey team
i need immediate help. my 32gb lexar usb stick is not longer being recognized by both my MBP'S
im sure i need to reformat it. BUT it doesnt show up in 'my computer' 'finder' or even 'disk utility'
although it does show up in OSX (apple logo>about mac>System) i can clearly see it in the jump drive.
does anyone know how to solve my sticky situation.

1. If the drive inside it has failed, the data on it can only be recovered by a professional service, which may charge hundreds or thousands of dollars.
2. All drives will eventually wear out and fail. Keep any files you care about on at least two.
(111859)

Date and time settings NOT sticking help me please :(

My date and time is stuck in cupertino ????
Doesnt matter what I do with the correct london setting as soon as a go to the home screen and back its changed back to cupertino??
Im at a loss.... ?????????
Ive synced and everything??????????

I had the issue after using the reset button within the iphone then re syncing with itunes.
Later I did a full restore from itunes where it downloads software 2 and installs, then I re synced all my music ect!!
Problem gone I got London to stick, and my twitter app is showing correct times again. To be honest I dare not look in date and time again in case I tempt fate, but of now all times on apps are correct...lol

Bluetooth stick help needed

MS-6967 and Sony Ericsson T630 problem
I am using a Sony-Ericsson T630, MS6967 bluetooth USB sitck with Fjitsu Amilo Celeron 2.4GHZ laptop. I have also the latest MS driver 1.4. build 10. Connected on O2 UK mobile.
I can connect to the internet using the bluetooth modem on my mobile but the speed is no higher than 9.6kbs. I've tried every config possible and my ISP offers me connection up to 56kbs. Can anyone please tell if this normal? What connection speed should I expect using the 6967? Is there any special configuration for the MS6967? Can anyone please give config ideias?
Help please
Ted

The equipment you are using would seem to suggest that you should achieve much higher rates than 9.6kbs. I suggest the problem lies with your mobile network provider.
There are various methods used to connect to the internet through a mobile phone; the three that come to mind are CSD, HS-CSD and GPRS. Now I am by no means a technical person but my understanding of these forms of connection is as follows:
CSD - This is the original or 'standard' form of connection and will offer you connection speeds of around 9.6kbs.
HS-CSD - This is a quicker form of connection and was imaginatively called 'High Speed'; from it you can expect 24kbs.
GPRS - Or 'General Packet Radio Services'. This form of connection can offer upto 33kbs however it is important to note it offers 'upto' that speed. Users connecting to GPRS in the same geographical area at the same time share the available data transfer; the result being at busy times of day in heavily populated areas that speed will be compromised.
So to increase your connection speed I advice investigating the services offered by your network.
If none of this makes sense or you want some more insight into the world of mobile internet connection then post a reply with specific queries and I will do my best.

Iphone indicator sticker help

Something fell into my iPhone's headphone jack and while attempting to get it out (which I finally did) I accidentally ended up stratching the indicator sticker is my iphone still covered under warranty? Also prior to that happening my phone was and now still is even more so acting up. The touch screen is acting up really bad keeps freezing and hitting wrong buttons/keys. The reason why I haven't taken my phone in yet is well the sticker because I used to be stationed in fort sill,ok and the nearest apple store was Oklahoma City which was almost 200 miles away and I didn't want to drive there and take that chance and get turned down for the fact the sticker I scratched. But now I'm stationed in fort lewis, wa and an apple store is much closer now.

Well according to Apple's Guidelines for Damage Classification for iPhone 3G, 3GS, 4, and 4S, under where it says "Paid Service" (in yellow), it shows that if the indicator sticker shows pink damage then the phone is not covered under warranty and you would have to pay for service. However, in your situation you stated that you accidentally scratched up the indicator sticker, which is not stated in the picture/link below. Also, since the indicator sticker is just "scratched" and does not show pink, then I assume that your phone should still be covered under warranty, But, since you also mentioned that you were attempting to get something out of the headphone jack, if there is visible signs of "damage" from you trying to get the thing out like, scratches to the jack itself and not the sticker you might also have to pay for service since its classified under "Audio jack damage with foreign material that cannot be removed" even though the foreign object was removed by you, the audio jack may still show signs of damage, and therefore would not be covered under warranty.
Click the image below for a larger view

Help - 10.4.4 is driving me nuts

I know others have had problems - here's mine. Installed 10.4.3 straight from the box - repaired permissions - downloaded Update10.4.4 from Apple - run it and repaired permissions - problems start. The repairs fail to correct permissions on about 100+ items - sample below:
We are using special permissions for the file or directory ./Applications/DVD Player.app/Contents/Resources/English.lproj/Viewer.nib/objects.xib. New permissions are 33204
We are using special permissions for the file or directory ./Applications/DVD Player.app/Contents/Resources/FadeWind.nib/objects.xib. New permissions are 33204
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.css. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.html. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.js. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.widgetplugin/Contents/Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.widgetplugin/Contents/MacOS/AddressBook. New permissions are 33261
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.widgetplugin/Contents/Resources/ABLargeTypeWindow.nib/key edobjects.nib. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.widgetplugin/Contents/Resources/abPlugin-Info.plist. New permissions are 33188
We are using special permissions for the file or directory ./Library/Widgets/Address Book.wdgt/AddressBook.widgetplugin/Contents/version.plist. New permissions are 33188
et al
They will not repair!!! Re-installed twice - run the update twice each time - without repairs sticking - help.
If I can get help resolving this it will be appreciated. I need to get the system stable before I install my Studio Packages - deadlines loom and the end is nigh.
BB

Hi,
That's normal and nothing to worry about:
Multiple "Special Permissions" after upgrading to OS 10.4.4
The 'We are using special permissions...' messages are informational only and can be ignored.

Is there any hope for Help Viewer?

I have read through as many discussions about Help Viewer problems as I can find, and still, help in Finder doesn't work. I have tried all of Dr. Smoke's suggestions and many others to no avail. Help Viewer still ends up going back to a blank screen, links that don't work, and the search just keeps searching.
All of the suggestions I have tried fix Help Viewer temporarily, but it has always gone back to its same old broken self.
If anyone out there can REALLY help, I would REALLY appreciate it.
Thank you!

Hi Jordan. Hopefully I can offer a solution for this which bugged me enough to really try to resolve it, and have now done so, at least for me.
First the essentials.
System Setup: Powermac G4 Dual 1GHz MDD. 1GB. MacOS 10.4.3
Issue: Loading Mac Helper from the Finder will result in a blank screen after the first launch. On first launch you will be able to click one or two links then it will not work and search will not function [issues may vary but blank screen always]
This problem occurred with earlier versions of Tiger. I have since done a clean install. Tried replacing the Help Viewer app from the Install disk and also the MacHelp.help document too, but it did not help. I even tried the same items from other disks just to check for corrupt files but still no change. Trashing the prefs does not seem to make any difference, nor the same with the cache folder but it can resolve other issues, just not this particular one.
NOTE Before others try this fix I strongly suggest you try the solutions suggested by Apple and those on the very good XLab web site. Here are a few related articles:
XLab. The most comprehensive guide to the Help issues.Check out the 'Help Viewer displays a blank window.' link.
http://www.thexlab.com/faqs/helpviewer.html
Apple. From the source. Not quite the same symptoms but offers Help advice on
'Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits'
http://docs.info.apple.com/article.html?artnum=107013
Solution:
1. Go to User > Library > Caches > com.apple.helpui [note: you need to launch Help Viewer at least once so that this folder is created]
2. Delete ALL files/ folders in the com.apple.helpui folder, if any.
3. Create a new folder inside com.apple.helpui and name it 'Mac Help' [the same as that created automatically by Help Viewer, case sensitive].
4. Select the new folder and use Command + I to see the folder 'Info'. First
label it red [to aid further diagnostics] and then change ALL the permissions at the bottom to *Read only* [click Details to see the options, not just 'You can'. Include Read only for 'Owner', 'Group' & 'Others'. You will need Admin access for this]. Close the Info panel.
5. Launch Mac Help from the Finder menu bar. If it was blank before, the Help Viewer screen should show the Mac Help homepage again. Try several links and search and Index. They should all work, and quicker now. Quit and relaunch. This time the Help Viewer works now and no blank screen. The issue with Mac Help is fixed ( but be aware that any other Help folders created could well cause the same issue, so check for these if it still happens and read on for details of how to deal with this other part of the issue)
*BUT*
Although this resolves the Mac Help issue, AS SOON AS OTHER MAC APPLICATION HELP's ARE LAUNCHED, IT IS MOST LIKELY THE ISSUE WILL RETURN!, hence the labeling of the Help folders red, to track newly created Help folders (i.e. Mail Help, Safari Help etc). If these are launched this automatically creates help folders in com.apple.helpui for them and they also cause the blank screen problem.
So, the best thing is to create Help folders in the same way that you did for Mac Help, for ALL Mac applications to avoid having to do it incrementally as and when you use another Mac application Help [or if you do a search it may well create folders anyhow]. These are the Help folders I have created, with the red label and 'Read only' permissions:
Activity Monitor Help
Address Book Help
AirPort Help
AppleScript Help
Automator Help
Bluetooth Help
Calculator Help
Chess Help
Console Help
Dictionary Help
Directory Access Help
Disk Utility Help
DVD Player Help
Font Book Help
Grapher Help
iCal Help
iChat Help
Image Capture Help
Mac Help
Mail Help
ODBC Administrator Help
Preview Help
QuickTime Player Help
Safari Help
Script Editor Help
Sherlock Help
Stickies Help
System Profiler Help
Terminal Help
TextEdit Help
There are probably more but these are the ones I could find fairly easily. If they are labeled red then it is easy to see if any others appear and cause the issue. Once I have done this I make a backup copy of these folders with the permissions set and archive it for use as and when I need to replace them.
Result: For me and my setup this has resulted in my being able to use Help normally without the blank screen issue for nearly two weeks now since I spent a lot of time looking at this issue. In fact I find Help works a lot faster and suffers fewer delays. Because this only requires amendments to file permissions, in a folder which is automatically replaced if deleted anyhow, I feel it is a safe and easy enough for most users to do if they have this problem.
I hope this offers a solution to other users with the same issue and who have tried the other suggestions (Including Dr. Smoke's and from Apple etc) but still have problems with the blank screen.
The Cause & Other Notes
Having been frustrated with this issue for several months now I spent some time trying to find the cause. It clearly does not effect everyone, and others have found the suggested fixes, such as trashing the com.apple.helpui cache folder and relevant preference files, have worked for them. It makes it a more complicated problem to identify. It appears perhaps to be related to your type/ speed of connection from the computer to the Apple help servers where the cache folders and files and downloaded from. This seems likely from error messages. It also appears that, for whatever reason, some of those files being automatically created when Help Viewer is launched are the actual problem. In order to explain why I think that, if you have this issue then you should get the exact same repeatable test which led me to find the solution.
Do this:
1. Firstly navigate to > Library > Caches > com.apple.helpui and trash this folder. Then before proceeding launch the following apps to help diagnose and follow what is happening:
a. Console [so you can watch for error message in console.log window]
b. Activity Monitor [to watch internet traffic during launch and browsing the Help Viewer]
c. Leave the FInder window so you can watch what happens.
2. Launch Mac Help from the Finder menu bar. It should launch and show the home page on the screen. Immediately you will see a new com.apple.helpui folder being created. Navigate into this so you can watch what is being placed in the newly created com.apple.helpui folder.
3. Now click on any of the Help links on the right (not the link to the apple web site). Immediately (slower if dialup and not already connected) you should see traffic over the network as the computer connects to the Apple help servers. Then, in the com.apple.helpui folder you will see a new folder called 'Mac Help'. Also some other numbered (0-15) cache folders which are not of interest right now. And on quit a file called 'TOCCache.plist' which does not effect things. Soon you should see an error in the Console console.log window something like this:
"2005-11-19 01:57:45.585 Help Viewer[1313] Exception raised during posting of notification. Ignored. exception: * End of archive encountered prematurely at 400"
I am not sure exactly why this is but it appears to be related to some sort of timeout and failure to fully download some items.
4. Now try to click on any link or Index. For me, nothing happens and I get only more error messages like:
"2005-11-19 02:02:21.190 Help Viewer[1313] Uncaught exception - * End of archive encountered prematurely at 400
2005-11-19 02:02:21.190 Help Viewer[1313] * Attempt to remove unrecognized exception handler 0xbfffdce0"
The only option is to quit out.
5. Immediately relaunch Mac Help. If it is like me then it will now be a blank screen accompanied by the following my critical error message:
"2005-11-19 02:03:33.543 Help Viewer[1319] * NSRunLoop ignoring exception '* End of archive encountered prematurely at 400' that raised during posting of delayed perform with target 375df0 and selector '_setupTOC'"
Now, everytime I quit a launch Mac Help it is the same error and blank screen.
This seemed to me to point towards an issue within the com.apple.helpui folder because when it is trashed Help Viewer will launch one time then stop.
So I went through each folder (I had a number of Help folders the first time) and tried moving it out of the folder, rather like testing for bad prefs in OS8.
Eventually I tracked the offending file/s down to this:
User > Library > Caches > com.apple.helpui > Mac Help > Contents > Resources > English.lproj > pgs > pgs.helpindex
As soon as this file is created then it all stops. Trash this file and relaunch and the homepage appears again until it appears and once again the problem reappears. This is totally repeatable for me.
Once I had isolated the problem file I tried various solutions to resolve it. The first was to replace it with the same file which is already in the System within the MacHelp.help documentation here (the system Library, not the User path)
Library > Documentation > Help > MacHelp.help
Copy MacHelp.help and then use Command + I and 'Show Package Contents' to navigate to:
MacHelp.help > Contents > Resources > English.lproj > pgs > pgs.helpindex
(right at the bottom of the pgs folder with hundreds of .html files)
I then replaced the existing pgs.helpindex with this one. It is different at it has an earlier Created date of 16/03/2005 (my vary), the one in the cache folder is Created 20/10/2005 (may vary?)
This allowed Help Viewer to launch correctly, but after a short time and re-launch it returned to the blank screen. Examining the file showed it was being overwritten by the later downloaded version, the one causing the problem. This led me to change the permissions to 'Read only' to prevent it being overwritten and after this the Help Viewer worked normally on relaunches.
I also changed and altered the permissions on the pgs/pgs2.helpindex folder in the same directory as the pgs folder as it seemed to also cause a problem.
So, finally I resolved the problem, with no error messages, the Help Viewer loading correctly and a working Help. However, I noticed that after a while the blank screen came back. Knowing the pgs.helpindex was OK it seemed likely that other .helpindex files in other Help folders created in the com.apple.helpui folder. This proved the case because, on trashing the new Help folder, it launched again. Swapping the downloaded .helpindex in say, Mail Help, and changing the permissions fixed it, until another Apple application Help folder was created and it re-occurred. The problem does not occur with all the Mac application Helps, but with some (notably for me, Mail Help, Safari Help and some others).
Finally I found that rather than digging into the apps contents I could get the same fix and also quicker Help browsing by simply creating the actual Help folders as described above and ensuring the .helpindex (or other folders/ files like idx) was not created.
From nearly two weeks trials it so far appears to completely resolve this issue.
Just be aware of any new Help folders/ files being created.
The are a few other observations:
1. I tried just altering the permissions on the actual com.apple.helpui folder to 'Read only' but whilst it allowed the Help Viewer to open fine, it broke links within the application Help windows.
2. I have not tried many Helps on other non Apple applications. I find that Toast help triggers error messages:
"2005-11-19 02:27:02.229 Help Viewer[1340] -[IdxSearchController openIndices:] caught a VTWIN exception. Bad index file is /Applications/Toast 7 Titanium/Toast Titanium.app/Contents/Resources/English.lproj/Toast Help/Toast Help idx
It is not possible to change the 'Toast Help idx' as it is an exec file. The errors do not seem to break Help Viewer. I had similar error messages from Quicktime Help when it loaded. I suspect that the Toast help is broken for similar reasons as mac Help b (it works for links to installed pages but not external ones). But it could be from the alterations to the Help folders. Either way at least Help works.
3. It is possible to get most .helpindex files from the relevant application contents but just using the Help folders is a quicker solution.
4. I can't help feel that the difference between those that have or do not have these issues is a slower connection, i.e. non-broadband. I have a 64k ISDN connection through a router which is pretty much 'always on' with solid 7KB speeds, but it seems this is insufficient for Help to work properly. I read elsewhere that connection speed appears to be an issue and Help is sensitive to this. It would be interesting to know what type of connection people with the issue have. I also have a hardware firewall in the router which may be a factor but it does not stop any other normal traffic and allows the files through anyhow. It has been in place for 6 years and with no issues. Just wanted to note it.
5. Certainly for my situation, it appears that the files being downloaded from the Apple help servers are actually causing the problem at my end. I can't explain why or how other than the tests explained above are repeatable and that using the same file but from the System file resolves the problem. It remains unclear why a slower connection would lead to files downloading which affect some people but not others? It may be something totally different of course but the error messages in Console do seem to point towards this.
6. I imagine the reason why the files and folders are downloaded are to ensure that they are kept up to date, as the pgs.helpindex for instance is a later creation date. However I do not seem to have any problems browsing or looking at topics, especially with the 'Include product Support Searches' option selected in the Help View menu. It means that there is extra traffic but gives a wider range of responses from Apple. Perhaps it is better to deselect this option if you have a slow dialup connection?
Summary
I hope that this solution can help others with this issue and perhaps other related problems. There is no way of me testing it further and I do not know how others who seemingly do not have a problem can check this. I just know it resolved it for me. I am no expert but a long time Mac user who is used to simple and elegant functionality, not the ongoing saga of the current Help, and wanted the thing just to 'work'.
Good luck
Simon

I have a new MacAir and don't know how to get info from my USB stick and my SD photo card. Can anyone help me please?

I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?

Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt

To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
Thank you for any help/ solution you can offer.
Regards

I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad

Help with text formatting in Stickies

I just discovered the Stickies app and it's almost perfect for helping me keep track of my tasks and to-dos. However, I'm slightly obsessive on minor details so I have a few questions:
Is it possible to center the text without having to paste from another source? I've set the style the way I want it in Word and then paste it into a new note where it looks perfect. Large bold centered text. I go to Note > Use as Default but the text alignment isn't saved. I saved the style as a favorite but have to drill down the styles dialogs just to center text. I'll be creating an deleting a lot of these during the day and it's actually easier for me to read these when the text is centered.
Same as 1 but for line-spacing. When I try to set the default with 1.5x line spacing new notes are created in 12pt Time New Roman
Is there a way to set it so that Command+Shift+Y always does a Paste and Match Style? My current workaround is to select all and then paste style to set them as the default font.
Thanks!

I had the same problem with CP7 and just upgraded to CP8.01. This version seemed to format my long answers almost perfectly when I imported the first two question pools - then it reverted back to the same old CP7 behavior. This makes me think that there must be a way to do this.
Update: Here's the workaround that I've used to get these "long questions" and "long answers" to fit into the multiple question Master Slide. I copied then duplicated the "MCQ, T/F, FIB, Sequence" Master Question slide. On the new one, I expanded the Question area box, both horizontally and vertically so it will accommodate even very lengthy questions.
I then did the same for the answers area - I have to adjust both so they didn't overlap - and I reduced the size of my "Review Area" since I won't be needing it in my exam format. After saving my project, I then imported a new question pool that was in GIFT format. Of course all of them are imported using the original "MCQ, T/F, FIB, Sequence" Master Question slide format. But now I can view my "Question Pool" (Windows > Question Pool), then select all of them (Control, A) then in the "Properties" tab you should have a pull down that allows you to select the new question master slide you just created. Select it and all of your imported slides now should display properly.
Note that this seems to work only when your answers can fit on two lines - not three lines or more. But if you've stretched wide the answer area box in you master slide this will work for most long answers.

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!
I really need this issue resolved it is driving me insane!!! How can the images appear perfectly fine on my laptop then when transferring over to a USB stick they just corrupt!?

Check out this site:
http://osxdaily.com/2012/04/22/format-drive-mac-pc-compatible/
That will show you how to format a USB stick for use on both PC and Mac.
If the problem continues take it to an Apple store and have them check it out.
>Also what s exFAT?<
From:
http://en.wikipedia.org/wiki/ExFAT
"exFAT (Extended File Allocation Table) is a Microsoft file system optimized for flash drives.[3] It is proprietary and patented."
That first site explains it at length.

TV Tuner USB TV Tuner Analog Global Stick not detected on HP G42 360TX (help me)

sorry my bad english.
i buy USB TV Tuner Analog Global Stick. see the product : http://sangattaonline.com/?vwdtl=ya&pid=47
i plug that tv tuner usb to my usb port on HP G42. My notebook not detect new hardware. There not notification on taskbar about new hardware. I use Windows XP SP3. If i use Windows 7 problem was the same. I try that on my PC it work. And i try that on my second laptop its work. Please help me....
1. HP G42 360TX can not detect all USB TV Tuner?
2. Should i change product of Tv Tuner? how about USB Hybrid Tuner Stick (UB430-AF)?its work..?
Thanks for help me. realy need help.

The problem I've had in Mac Pro with Hauppauge's USB myTV.PVR (which also had Eskape CD - 32 Bit that ran in Leopard but not Snow) was same message in Vista U. 32Bit : this device can perform better...
which I ignored. The message does not occur in Windows 7. I do have problems with MCE not recognizing the tuner occasionaly but prefer to use Hauppauge's WinTV 5,6,7 App. in any case.
If you have not been to Hauppauge's site you may see something that helps including driver updates here:
http://www.hauppauge.com/site/support/supportmainhvr.html
http://www.hauppauge.com/site/support/support_mce.html

I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps.

HELP - I deleted an adobe file that I saved to a memory stick and I need it back really badly :(

HELP - I deleted an adobe file that I saved to a memory stick and I need it back really badly

Try this Google search:
http://www.google.cl/#hl=es&tbo=d&sclient=psy-ab&q=free+data+recovery+software+for+flash+d rives&oq=recovery+software+for+flash+drives&gs_l=hp.1.3.0i30j0i5i30l3.9708.24161.0.34539.3 4.26.0.8.8.0.378.7320.2-21j5.26.0...0.0...1c.1.lb0o4diaEEU&pbx=1&bav=on.2,or.r_gc.r_pw.r_q f.&bvm=bv.1355534169,d.eWU&fp=ff7a879957bf69ba&bpcl=40096503&biw=1112&bih=865
It gave me plenty of hits, but be a little careful. I would suggest using the free trial of one of the paid products. As I have never used one, I cnnot recommand any.
And remeber: every time you write something on that flash drive, you risk overwriting your lost file, thus decreasing your chances of recovering it.

NEED HELP! - Installing Camera raw presets from USB Stick

NEED HELP! -installing Camera raw presets from USB Stick.
I am attempting to install the Camera Raw Presets.
It says to put them into User Name/Library/Application Support/Adobe/CameraRaw/Settings...
When I get to CameraRaw the ONLY folders in there are CameraProfiles & Lens Profiles.
I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one.
I have latest version of CameraRaw installed and still no settings folder.
I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where.
I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS 10.7.3
Do I need to reinstall Camera Raw and how do you do that?
Will I then lose my presets that I made in CameraRaw?
Thanks for your help

Here is a note from the ACR 7.1 beta release. http://labs.adobe.com/technologies/cameraraw7-1/?tabID=details
Perhaps this answers question.
Frequently Asked Questions
Why is it no longer required to place the plug-in file in the specified directory on my hard drive?
The Camera Raw update process has grown to include lens profile and camera profile files which are easiest to install via a single installer process instead of updating several different directories manually.

Stickies help.

Similar Messages

Maybe you are looking for