Still on track for EoM July? re: timeline for v6...

could anyone comment on the v6 release?
I see test files were posted on 16-July.
timeline still this week or ?
will it be iso d/l from CCO vs. physical media, etc.
thanks,
Rob.

Are you planning to upgrade right away? I'm frankly a little scared. We'll probably wait a bit, but by all means you should upgrade right away and let us know how it goes;-)

Similar Messages

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Why can't I enable an audio track for recording? (It won't let me)

I want to record VO but PP won't let me...
On Mac OS X 10.10 Yosemite in System Preferences:
• Sound Input is set to C-Media USB Headphone Set (an Alesis usb mic...works fine for VO in Final Cut Pro 7)
• Output is set to Headphone port
In Premiere Pro CC Audio Hardware Preferences:
• ASIO Hardware is set to "System Default Input/Output"
• I have also tried "C-Media USB Headphone Set but this, too, doesn't work
• With "System Default I/O" selected, Output Mapping is set to "Adobe Desktop Audio" (only choice), and shows:
     • "Built-in Output: Headphones 1
     • "Built-in Output: Headphones 2
     • "C-Media USB Headphone Set: Front Left
     • "C-Media USB Headphone Set: Front Right
all four of these have a couple of square icons to the right.
In order to record VO, I first need to "enable track for recording" in the Audio Track Mixer. There are no in or out points set in my timeline and the tracks are not locked or solo'd or anything. So why can't I select the audio track I want to use to record VO? I click it but there is no response. I just want to know why this software is not doing what it's designed to do.

is I learn still around -? That was VERY HANDY!

Can't get rid of the "your document is being tracked for reviews" message

I used Adobe Professional for the first time to conduct reviews on PDFs. I used the "Send for review by email" option. Now I am done with the review, have incorporated the comments, have compiled FrameMaker files, and produced a new PDF. But when I open the final PDF, I still get the message that you are opening a document that is being tracked for review. How do I make sure the message goes away?

Basically, while I was trying to figure out how I was going to send my forms to people, I tested the "Send for review by email" function, just as the OP did.
Pretty sure that's what triggered my form to be stuck in this "Marked for Review" mode.
Appreciate any help y'all can give me.
Again, I attached a screen shot of the pop-up in question

Set default audio track for playback in Source monitor

So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
Thanks!

I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

Only the old fashioned way, like if you lost a wallet or purse.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Tracks for garage band

This is my third Mac and on my other macs, GarageBand came with more tracks. I downloaded the update and it installed so now I have GarageBand '08 but I still have minimal tracks. When I check for updates to download the free tracks that are supposed to be provided it says that there are no updates. What is an easy way to get the downloadable tracks for GarageBand? (without buying a jam pack)..... Right now the drum tracks only consist of two kits and the guitar tracks only consist of one guitar track, aren't there supposed to be more? I do not know if they are already on my mac somewhere and need to be installed or what, help would be much appreciated.

Assuming that by "tracks" you mean the loops:
http://www.bulletsandbones.com/GB/FAQPages/NoLoops.html

How to use Progress Tracking for PO

Dear SAP gurus,
I have requirement to track the progress of goods in the PO. I recently bump into tcode EXPD and want to use this functionality.
My detailed requirement is like this:
a. We have status of:
    - Leaving Factory
    - Arrive Port
    - Received in Warehouse
b. When the status is assigned, I only need to put the planned date for last status (Rec in Warehouse), and then system should be able to calculate the planned date for the preceeding 2 events.
From the explanation in library it seems that all functionalities can be covered by EXPD. I have configured the status as events. Define status rec in warehouse as starting point for automatic schedule, and then define the schedule for all the events as backward. However when I specify the planned date for the event Rec in Warehouse, and click schedule, and i click refresh, but still nothing happen.
I have never seen this in work before, but I assume that the system should be able to put the planned date for each event based on the date that i put as starting point.
What do i miss in here? Or the functionality is not meant to be like that?
Best regards,
John

Hi John,
For configuring Progress Tracking you need to first make some config settings. You need to create Events; Scenarios; their inter-relationships; Profile, etc. in IMG settings under MM>Purchasing>Purchase Order-->Progress Tracking.
Only after this, will the event get assigned to your PO for tracking purposes. Later you can use EXPD to see the progress tracking for your selected POs.
Let me know if my inputs were of any use or you need any more inputs.
Regards
Rajeev

[svn] 2296: Initialized merge tracking for 3.0.3 changes that go back to 3. 0.x

Revision: 2296
Author: [email protected]
Date: 2008-06-30 07:01:14 -0700 (Mon, 30 Jun 2008)
Log Message:
Initialized merge tracking for 3.0.3 changes that go back to 3.0.x
Property Changed:
flex/sdk/branches/3.0.x/

Your Firefox settings and info are kept in a folder separate from the Firefox program, called your profile folder. Try creating a test profile, to see if the problem still occurs. See [[Managing profiles]]

Why, after clicking that I don't wish to be tracked, am i still receiving tracking cookies and 3rd party cookies from websites? How is 5.0 an improvement if websites don't respect this?

ALL websites that i've visited have still placed tracking cookies, which i then need to individually delete after leaving their site.
They're not respecting that i don't want to be tracked, so what good is checking that box in my options?
Bring back NOT accepting cookies from 3rd parties. I don't need admanager, tacoda, etc cookies on my computer.
Also websites are displaying a js picture that i can't block. I block all pictures that contain people or animals for religious reasons.

Selecting the "do-not-track" setting will only make Firefox send a specific HTTP header (DNT=1) to a web server.<br />
It is up to the server to do something with that request.
* http://blog.sidstamm.com/2011/01/opting-out-of-behavioral-ads.html
* http://blog.sidstamm.com/2011/01/try-out-do-not-track-http-header.html
* http://blog.mozilla.com/blog/2011/06/21/mozilla-delivers-new-version-of-firefox-first-web-browser-to-support-do-not-track-on-multiple-platforms/
* http://blog.mozilla.com/blog/2011/03/30/advertisers-and-publishers-adopt-and-implement-do-not-track/
* http://browserspy.dk/donottrack.php

Acceptable and Quality Still Photo Resolution for HDV Documentary

I've scanned through several pages of posts on photo resolution here, but I haven't actually found a simple answer to a beginner's question. Two, actually:
1. If someone is supplying you with still photo prints for scanning and use in a documentary (shot in HDV, edited on FCP5), is there a particular size print that you should ask for? Does the broadcast venue (theatrical, TV, etc.) have any relevance?
2. If someone is scanning photos and sending you a CD with them, what are the specs (size, resolution, etc.) you should ask for? And are there "minimum acceptable" specs and "preferred, high quality" specs?
Thanks.
Paul S.
Power Mac G5 [email protected]; 4GB RAM Mac OS X (10.4.4) FCP 5 (FC Studio), Logic Express, Presonus Firebox

Having worked on several long-form historical docos with hundreds of source photo scans, I'd highly recommend getting the originals in as high a resolution as you can (at least 300 DPI), and getting the entire photo scanned. You just never know when you need to apply pans or zooms or crop into a particular area to improve the edit, and there are many simple ways to prep the selected photos for import.
The simplest is just to do the scaling & cropping in FCP. It will do a fine job of this, but if it turns out most of the photos will be static, you can waste computer resources by importing unnecessarily-large images. As mooblie pointed out, you strictly only need enough resolution to prevent scaling up past 100%, as this will create pixelated lower quality output.
The most common way to prep scans is in Photoshop, where you can scale the image to a desired pixel size very easily. I'd still leave the image at its natural frame size (as scanned), so you have the most creative choice when you are framing it in the timeline using FCPs cropping & motion tabs tools.
If you've got lots of photos and lots of pans & zooms, consider using one of the third-party tools that will help with this, such as Photo to Movie from LQ Graphics, Moving Picture from StageTools, or even the plugin for FCP I wrote to help with the docos I mentioned above. It's called Pan Zoom Pro and you can see about it and download a demo here: http://www.lyric.com/fcp-plugins/index.htm#pzp .
Cheers,
John
Lyric Media

Player Error: "You cannot record without enabling at least one track for recording"

So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

This is how I have just made a recording:
Select track to record (1), Select record (2) then press play to record.
Use the in-out markers in the program monitor to select the area to record.

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

JohnL23
Thanks for the update.
There are several Adobe Premiere Elements Forum threads about situation such as the one that you have encountered. Typically they are the results of some heavy activity in the narration track. Some have found success in maneuvers between the Expert and Quick workspaces in versions 11 and 12 or Timeline and Sceneline workspaces in versions earlier than 11. That is why I mentioned that type of factor in a prior post in your thread.
If that is not working, then we are forced into the new project where the problems in the current project are not presenting.
I will do a search for the threads that I am recalling about your type of issue. But, right now all roads seem to head to the new project. But I would ask "Can you salvage this project by creating your narration clips in Audacity or a new Premiere Elements project and import them into this project, putting the clips on one of the numbered audio tracks?"
If the problem should reappear in the new project, please let us know including the details of what was going on immediate before the problem surfaced.
Thanks.
ATR

STILL no tracking number

Woke up checked email on the iPad and STILL no tracking number or shipping email. This stinks... Anyone get one today or this morning? Anyone NOT have one and called CS?

colemanbd wrote:
First droid 3 was DOA (Dead on Arival) got it back to a verzion store on 9\26
Orderd the new phone on 9\26 (monday) its 9\29 (thursday) and still no email notification of any kind from verzion.
I called for a ordernumber and store location they gave me.
Typed it in and still getting " We are experiencing technical difficulties, please check back later"
Still no email, probably a false order number, nothing to comfirm that i even made an order.
Has your payment method been charged? Contact VZW to make sure the order went through and/or is being processed. Even if they can't give you a tracking number they should be able to see if there is an active order. Also, when you placed the order (assume you did it online) did you not print or save the final page of the order process? That should provide you with at least an order number or confirmation number. If you did not receive a screen like this then it's possible the order didn't complete. If you ordered in the store then you should have received something (a receipt for example with some details).

One track of Audio in the timeline

I am only getting one track of audio in the timeline when I drag my clip from the viewer. In the viewer the audio is in stero, but when I drag it to the timeline it only one channel. Is there a setting that I change to get two channel of audio in the timeline?
Thanks for the help
JEFF

Right (or control + click) over in the patching bay at the left of the timeline and see if it sees both a1 and a2. Assign the one you can't see to a patch and that might bring it back.

Still on track for EoM July? re: timeline for v6...

Similar Messages

Maybe you are looking for