STO in SAP SRM

Dear Experts,
Does SAPSRM support Stock Transfer scenario (STO) in intra company and intercompany mode in standard?
If it supports, what configuration is needed to achive it?
Thanks and regards,
Ranjan

Hi Ranjan,
What is the technical scenario that you are implementing?
In case of classic this wiki link helps in configuring to create STO in ECC out of SRM SC.
http://wiki.sdn.sap.com/wiki/display/SRM/OnestoprequisitioningprocesswithSRM-ClosingloopwithStocktransferorder%28STO%29asfollow-ondocuments
Thanks,
Yaseen M

Similar Messages

Technical Help on creation of an Object in SAP SRM 4.0

Being on SAP SRM 4.0, we currently have a requirement for creation of Need Definition( Basically a build up for the contract ). Need being collected from the Backend systems need to be validated and approved by Buyers & Lead Buyers in the SRM system.
Technically, this task is broken down to below tasks.
1) Creation of need definition screen - Basically a template where a need can be created with Items, Sub Items and other related information
2) Selection Screen for Buyers and Lead Buyers - This enables the the Buyers to select the Need Definition assigned to them based on the status.
3) Report - List of all the Need Definition( Item and Sub Item)satisfying the selection of step 2. with the possibility to navigate to the Need Definition screen ( Step 1) upon selection.
Now the question is,
what technology is recommended for the above Tasks? We thought it would be BSP but do you guys have any suggestions...
Do we have any issues in displaying the report in BSP? please let me know
Remember we are version 4.0 of SRM.
Thanks in Advance..
Mohan.

Even though I don't have much knowledge on BSP, it should be a good option. Since SAP has used BSP to develop new screens in SRM 5.0.
Regards, IA

Query on components to be used for SAP SRM Installation

We have a requirement for SRM Server.. I need some help on what installation objects should I download. This is on AIX and DB2
for "EHP1 FOR SAP SRM 7.0 -> based on SAP NetWeaver 7.02"
I'm sure that I'll need :
1) Installation Master
2) Export (SAP SRM 7.0 EHP1 Installation Export 1-3 of 3) 51038765_1
I have queries on this:
3) For Java stack, the component available is BS7i2010 Java Components 1x4 of 4
I have NW 7.3 based EP system. Can that be used for Java or Do I need to install another stand alone Java ?
If it can be used:
- Will it not create problems b'coz portal is on 7.3 and SRM is based on 7.02
- are there any SRM Java specific components in this installation object or is it a plain NW 7.02 Java stack ?
4) What is SAP SRM 7.0 EHP1 Components in terms of functionality given?
5) We need MDM Server:.
For MDM Server: Where do I need to download MDM Server from ? I am not sure If we have license under our S-user.. Can you give me the path where download starts ?
For MDM Catalog :what is the difference in
- SAP Application Components"> SAP SRM"--> SAP SRM ENHANCE PACKAGE" >EHP1 FOR SAP SRM 7.0>Installation -->based on -->based on SAP NW 7.02 --> 51039147_1 SRM-MDM CATALOG 7.01 1 of 5
V/S
---SAP Application Components --> SAP SRM Catalog --> { SAP MDM Catalog Mgmt 7.01 ; SAP MDM CATALOG MGMT 3.0/NW701 ; XI CONTENT SRM-MDM CATALOG 3.0; SAP CATALOG CONT.MGMT. 2.0_700}
Any clue, please help..

Hi,
Go with: SAP Application Components"> SAP SRM"> SAP SRM ENHANCE PACKAGE" >EHP1 FOR SAP SRM 7.0>Installation -->based on -->based on SAP NW 7.02 --> 51039147_1 SRM-MDM CATALOG 7.01 1 of 5
Download relevent OS copy as its AXi and DB2. What ever It can be: OS Bit 64 or OS Bit 32.
As it's DVD so it contains all version info in lable.sca file. Read it before you start installation.
Regards,
yaniVy
reward if helps

Portal Runtime Error while performing User Mapping to SAP SRM

Please find below the error I received while User Mapping from Enterprise Portal to SAP SRM :
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 04:21_23/06/05_0073_8097650
See the details for the exception ID in the log file

Hi,
yes, Karsten is correct. Just some background:
"User Mapping not fully available.." finally means that user mapping is configured to use strong encryption, but the main crypto key for user mapping is missing. Usually, that's because "SAP Java Cryptographic Toolkit" and/or "JCE policy files for unlimited strength encryption" are not installed (or the server hasn't be restarted afterwards). The note will most likely help
Best regards
Heiko

SAP SRM 7.0 with ECC EHP 4 components to execute scenario

Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveen

Hello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul

Approver not determined process controlled workflow in SAP SRM 7.0

Hello all,
I have setup process controlled workflow in SAP SRM 7.0 EHP3 for shopping cart approval.
I have 4 approval levels.
I have used item-based Decision for entire document because for some items i want system approval.
In implementation of BADI /SAPSRM/BD_WF_RESP_RESOLVER, in the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP, i am skipping the items for which i want system approval.
Also in method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID of BADI implementation class, i am keeping the approver table empty for the step which i want system approval.
For example i have 1 item in shopping cart and for 1st step, based on some accouting criteria, i want system approval for 1st level and the workitem should go directly to 2 approval step when shopping cart is ordered. This is not happening.
But if i have multiple items, and one item should have system approval based on some criteria and the 1st approval level should be system approval and other item should go to the 1st approver. This is happening and showing 'system' approver for item1 and 'appr_xyz' for item 2.
For shopping cart having only 1 item, If i approve the shopping cart in this state only, it doesn't go to any approver and is not usable.
am i missing anything in BADI /SAPSRM/BD_WF_RESP_RESOLVER??
Please let me know.
Regards,
Yayati Ekbote

Hi Adrian,
Yes it is possible to display custom workflows in the Universal Worklist, However, I am not sure what you are trying to do with a routing table. If the workitems are of type decision, you can use UserDecisionHandler (action handler) configured in the XML file to use the Approve/Reject functionality - we are talking about webflow connector here correct? R/3 connector?
Regards,
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

FM or include that triggers Workflow in sap SRM 5.0.

Hi All,
Can anyone tell me the FM, for triggering a workflow in SAP SRM 5.0. I mean the name of the program or Include or an FM which finally triggers workflow while saving?
Thanks,
Edited by: Manoj Singh on Oct 6, 2011 6:51 PM

Hi Gaurav,
Thanks for responding. Yes, all the backend config are in place since I am able to successfully run an equivalent RFC (BBP_PD_SC_GETLIST) and another RFC named BBP_PD_SC_GETDETAIL from SE37. The problem seems to be something very specific to the ES. May I request you to run this ES at your end (if possible) and let me know the result possibly with the input and output message similar to the one I pasted in the origincal question.
Thanks in advance,
Nilay

Integrating with SAP SRM 4.0

Hi all,
I'm currently involved in an e-procurement project that will have to integrate SAP SRM 4.0 with the EAI solution of our company (webMethods).
As I don't know much about SRM 4.0 technology, I'd like to know the standard way of integration with SRM 4.0:
- Is SRM 4.0 capable of exposing IDocs?
- Is SRM 4.0 capable of invoking BAPIs?
- If so, how can a Purchase Order put into the arguments of the BAPI?
- Is SRM 4.0 compelled to talk with XML messages (particularly SOAP XI) or are IDocs and BAPIs a suitable solution?
- Is SRM 4.0 standard output xCBL?
- Can SRM 4.0 expose and invoke Web Services natively?
In other words, I'd like to know whether we are obliged to use the XI Content of SRM 4.0 in order to integrate with webMethods. We have already done integration with R/3 4.6 and we used IDocs with the SAP Adapter. We would like to capitalize on our previous experience and save us from having to assess the feasibility of an integration with SRM via XI.
Thank you in advance for all your answers.
Regards,
/ML

Hi Marcel,
Underlying technology is WAS (Web Application Server) which is an enhanced version of the middleware BASIS technology used by 46C. XI is a replacement for messaging platforms like webmethods, so if you are using webmethods with SAP adaptor you don't need to use XI because you are already using a messaging platform. Only reason you may want to use XI would be if you can build upon the XI content available to you. If you are not interested in the XI content then go ahead and use webmethods using SAP adaptor to connect to SRM. I don't see any problem in that.
Regards,
Sanjeev

SAP EP 6.0 SP12 Integration with SAP SRM 4.0

Hi Buddys,
When I am trying to create system in SAP EP for the backend SAP SRM Server using SAP Wizard in SAP EP, and testing the connection with test connection option, test is always failing.
In system creation wizard (SAP system for dedicated application server), values for connector, user managemnet have been maintained as mentioned in How to guides for SAP EP and alias for system has been created.
SAP EP has been installed with option to use SAP Backend SRM Server for Users.After SAP EP Installation, all SAP users in back end SAP SRM can be seen in SAP EP.
Software versions:
SAP EP : EP 6.0 SP12
SAP J2EE Engine : J2EE engine 6.4 SP13
O/S : Windows 2003 Server
SAP SRM : SRM 4.0 on SAP WAS 6.4
Your help in this regard is much appreciated.
Regards,
Prasad

Hi Venkat,
When you create a system choose "SAP system using dedicated application server".
The minimum parameters for creating the system are
application host
Logical System Name -
Logon method - UIDPW
SAP System ID
SAP CLIENT
SAP System Number
server port
System NAme
System type - SAP_R3
user mapping type - admin, user
Create an alias, specify the userid and password for the system in Personalization and then do the test for the connection.
Even then if it fails you can go to Sys Admin--> Support --> Sap Application --> SAP Transaction
choose the system, specify the tcode, specify the gui type and hit go. If you execute the transaction code then the connection is OK.
Hope this helps,
Thanks,
Praveen
PS.Dont forget to reward points

SAP SRM Prod with Oracle DB and AIX 5.3 Performance Issue.

Hi Basis Gurus,
Today my SAP PRD system all of a sudden was running slow and users had difficulties executing TCodes as it took minutes before the screen appeared.My system is SAP SRM 4.00, Oracle Release 11.2.0.1.0 and AIX 5.3.
From Basis point of view , we noticed that all the work process were hanged due to RFCs' occupying it.Couldnt investigate further on the system as we needed to restart asap because users needed to log on. A quick check on SICK shows no errors.What we managed to find out is that we needed to check this parameter below and set it accordingly:-
rdisp/rfc_min_wait_dia_wp:-
Definition
Number of work processes kept free for other users.
Use
This parameter is used to reserve a number of dialog work processes for dialog mode. It prevents parallel RFCs from occupying all the processes.
The parameter rdisp/wp_no_dia specifies the absolute number of dialog work processes.
Unit: number of dialog work processes
Default value: 1
Example
If 10 dialog work processes are configured for the instance (rdisp/wp_no_dia = 10) and the parameter rdisp/rfc_min_wait_dia_wp = 3 is set, parallel RFCs can occupy a maximun of 7 dialog work processes. Three dialog work processes always remain free for dialog mode.
There are 20 DIA processes in our system, perhaps reserving a minimum of about 5 work processes for DIA users will be useful via the parameter.
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
When we went for a restart of the system we encountered another issue. Steps to the issue are as below:-
1) Did a proper shutdown of Oracle and SAP.
2) When we start using startsap script, it doesn't start DB so we started DB manually but listener was having problem
    so we stopped all.
3) We also did a cleanipc, it too throws below error:-
sidadm> cleanipc <systemno> remove
               exec(): 0509-036 Cannot load program cleanipc because of the following errors:
               0509-130 Symbol resolution failed for cleanipc because:
               0509-136   Symbol memmove (number 106) is not exported from
               dependent module /usr/sap/sid/SYS/exe/run/libsapu16.so.
               0509-192 Examine .loader section symbols with the
               'dump -Tv' command.
4) Also the Listener file has no contents,it's null file.
5) This is another error :-
    exec(): 0509-036 Cannot load program /oracle/sid/112_64/bin/tnslsnr because of the following errors:
    0509-150   Dependent module /oracle/sid/112_64/lib/libttsh11.so could not be loaded.
    0509-101   The module has too many section headers
    or the file is damaged
The libttsh11.so file was empty dated 25th timestamp as below in PRD:-
-rw-rr    1 sid   dba               0 Nov 25 07:12 libttsh11.so
Further checking has let me to understand this is an Oracle Bug from this link:-
http://gavinsoorma.com/2009/12/11-1-0-6-clusterware-upgrade-to-11-1-0-7/
This Oracle bug only happens in an Upgrade time and how could this happen to my Production system during a restart process.
Also this system was restarted during the last weekend's maintainance window and it came up with no issues.
6) We copied over the libttsh11.so from our QA environment to PRD and did a Startup:-
-rwxr-x---    1 sid   dba        65967496 Nov 25 07:40 libttsh11.so (This is the copied over file from QA)
7) After Startup everything has been in order till now.
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before. Hope all the Gurus here could shed some light into my 2 questions as I am looking for positive answers.
Thank you.
Regards,
John

Hi,
Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version for SAP solutions. Many of your problem will get resolved with it.
Question 1:
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
Generate EarlyWatch report for more detailed view
Question 2:
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
The libttsh11.so library cannot be found in the related directory.
Cause
The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
Such a configuration will cause, installation, relinking and other unexpected problems.
Solution
Disable the CIO option on the filesystem.
References
NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
Hope this helps.
Regards,
Deepak Kori

Establishing a connection between SAP SRM and MM

Dear All,
I am working for a multi-national company and now we are thinking to implement SAP SRM but I have some questions about communication between SAP MM and SRM. Firstly I want so share with you our as-is status and then my doubts and question that I have.
In our case we have two different locationed organizations which are using different version of SAP system and SAP MM. In this two sap system mostly codes are and descriptions are different for all materials and now we want gather all data and we want to have one global code system and (local code also will remain). I mean we want to call same materials with one global unique code instead of two different codes. We are thinking to implement something like coding center that will take local master data from local organization then will assign global code, update table then with somehow will update SAP SRM.
For example:
We have local master data on R/3 is maintained manually by local user and net item is created locally each country by local user.Coding center will be aware of new creation by mail, automatically. Coding center will update table (adding a new row for each new item) on translator (tool for assigning global code for materials) assign to each new item a global code and category and in this way SRM will be updated automatically based on translator.
I am thinking to develeop a tool (excel,access etc.) that will take new item creation manually or auto from local organization then will assign a global code and category then will update SAP SRM automatically
Regarding to tool I have some questions:
1)     which are the standard communication channel between R/3 and SRM or How they can speak with each other ?
2)     Is there any standart batch file (BI or BAPI) to be able to perform this.Is it possible to develop tool using excel or access etc. which will manage coding task.
3)     When we are trasferring for the first time Master Data from MM to SRM is there any standard transaction?
4)     how the two MD are aligned (i.e. what if a new item is created or modified on MM)?
5)     standard program (transaction) for aligning available ?
6)     ) how this process can be triggered (scheduled using SAP scheduler, event or user driven)
7)     Where the translator (tool) should be (R/3 local, SRM, BW, other) --> Enrichment table
8)     How we can build the communication transaction?
Thank you very much
Any comments and answers will appreciated and rewarded
Regards,

Hi,
Have you considered using CCM. You generally use an industry standard code (perhaps UNSPSC) in CCM as your vendors would all have different number (similar to your scenario). CCM is a plug-in to SRM, supplied by SAP.
The authoring tool is where you can enrich your catalogue, and have approval dependant on rules that you setup. In your case you would possibly have a catalogue per locationed organisation (or R/3 system). These would then be mapped to a master catalogue, and assigned to users as views. This tool is a BSP on SRM. You could also upload these catalogues from Excel (as a CSV) or through XI as XML. We use the automatic transfer of materials from R3 and then there is a report in SRM to feed that through to the catalogue.
The only thing that needs to be thought through is how you feed the selected catalogue item back to the differing R3 systems, but this shouldn't be a stumbling point.
Cheers
Rob

How to Populate Values from ECC to SAP SRM

Hi Freinds,
we have two custom fields in Purchase Requisation ( ECC ), my requirement is to same fields i want to create in SC Item Tab, i have included in tem Tab, but now i want to populate the values from ECC to SRM, can any give me idea how to do this
Thanks
Kumar Srini

Hi,
You need to create two custom fields in the shopping cart corresponding to the two fields in purchase requisition.
After that, you need to map the two fields in ECC to SAP SRM. In srm spro settings, you can find the mapping options.
regards,
Ranjan

What is the Role of SAP PI in SAP SRM?

Hello Gurus
I'm from SAP-XI background.
In my project I need to create a scenario from SRM ---> PI/XI ---> MDM.
I'm having the below queries regarding this scenario.
1) Do I need to download the "XI CONTENT for SRM SERVER and import it into PI server.
2) If so what is the exact location in the service market place from which I can download
3) What are the steps that need to be done between SRM and PI and also in SLD so that data will be sent from SRM to PI.
Can anyone answer my queries.
Thanks and Regards,
Pruthvi

Hi Pruthvi,
Mentioned below are the list of output medium for SAP SRM.
1. Email.
2. Fax.
3. Print.
4. XML.
Whenever SRM want to send data to another system in XML format and if you are not using SOA then PI is very much required to transfer the XML data to the target system. When you integrate SRM with ECC 6 EHP 4 or higher version then many documents are transmitted in XML format only and XML document is sent out of SRM using ABAP Proxy.
Since the XML data is sent out via ABAP proxy you have to import the integration objects for SAP SRM into SAP NetWeaver PI. you can find the same in the below location.
https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=Y&EVENT=TREE&TM…
Steps involved :
1. Deploy the integration objects of SAP SRM into SAP NetWeaver PI.
2. Update the SLD with new business system data.
3. Check Active Process Integration in the transaction SPRO in SRM .
4. Go through the below steps :
     1) One RFC of type H to point to PI with all the details.
     2) Define the role of the business system in the server that you want to see(Sxmb_Adm)
     3)Connection between Business System and System Landscape Directory.
     3a)RFC destination LCRSAPRFC of type T for SLD connection.
     3b)RFC destination SAPSLDAPI of type T for SLD connection.
     4)Maintain the SAP J2EE Connection parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE      Engine
     5)Maintain SLD access details in Transaction SLDAPICUST.
     Please refer the section 1.3.1, 1.3.2, 1.3.3 and 1.3.4 in the document(as linked provided below)
SLDAPICUST should point to the SLD host server. If you have a central SLD installed on the Dev server, then it is ok that it is using the host and port of the Dev server.
PIAPPLUSER is the normal user that is used in trx SLDAPICUST (the user must have the role SAP_XI_APPL_SERV_USER).
'Lastly, will the gateway Server of SAPSLDAPI and LCRSAPRFC will be the same for both DEV and QAs systems in XI?'
5. Make the necessary confirmation in Integration directory for the relevant interfaces.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?quicklink=index&…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?QuickLink=index&…
Checking XI Settings - mySAP SRM: Basic Settings - SAP Library
Regards,
Suresh

Vendor Master can not replicate from SAP R3 to SAP SRM system.

Hi All,
We face one issue when we use bbpgetvd program to transfer Vendor master from SAP R3 to SAP SRM, after I check Analysis Application log, found the following issue:
Error: No Bank Master Data Maintained No Bank Data Transferred
Error: Name/Address for Vendor Already Exists Vendor: 0015118743 Address Number 0000054208
Error: Warning: Complete Business Partner: Vendor: 0015118743 Backend: APP002TS No Transfer of Vendor Data
But I check BP in SRM and can not find vendor 0015118743 information, so could you give me any tips or suggestions to fix this issue. Is there any table in SRM system to keep Vendor Master like SAP R3?
Thanks for your kind suggestions or help in advnance!

Hello Gavin,
>
Gavin Feng wrote:
> (...)
> 1. How to use BP to find business partner by address num 0000054208, I did not find this search condition.
> (...)
You cannot.
Business Partner are stored in BUT000 table. I don't remember if its address number is also stored in this table.
If yes, link is done directly between both.
If not, this is the person number which is stored in BUT000. So, use your address number to get its corresponding person number using ADCP table. Then, with this person number, check in BUT000 what is its corresponding Business Partner.
Finally, with its corresponding GUID, check in VENMAP table the vendor number.
>
Gavin Feng wrote:
> (...)
> 2. I used VENMAP and ADRC to check vendor 0015118743 and address num 0000054208, but there is no record in both table, so why the SRM system generate information that is "Name/Address for Vendor Already Exists".
> (...)
See my answer above concerning ADCP table.
Regards.
Laurent.

SRM 5.5 as an add-on on ECC 6.0 vs SAP SRM 5.5 server

Hi
Are there any limitations if we go with SAP SRM 5.5 Server as an add-on on ECC 6.0 compared to Implementation of SAP SRM 5.5 server on its own.
FYI-We just have one ERP Back-end system.
BTW, what is the difference between SAP SRM server 5.5 vs SAP SRM server 5.5 Plus.
Thanks in advance.
Thanks & Regards,
Anji

Hi
Summary:
You can use classic scenario in Add-on.
You can use self-service procurement and SUS in Add-on.
You cannot have Sourcing and other scenarios.
No migration from Add-on to Separate server available.
Best regards
Ramki

STO in SAP SRM

Similar Messages

Maybe you are looking for