STO: item sequence in PO is different from delivery doc

Dear All,
Issue is regarding STO.
Once we create the purchase order then do the delivery.
What we observe is the item entered in PO is not in the same sequence while creating the delivery, due to which client is facing the problem at invoice level.
For ex: Material in item no. 1 in PO is item no. 10 in delivery document.
For further clarification, please revert back.
I/p's will be of great help and rewarded too.
With regards,
Vijayshree

closed

Similar Messages

  • Unable to delete PO line item if GR qty is different from IV qty

    Dear all,
    Please help me to check this issue. The PO line item purchased with 10pcs (quantity), and the goods receipt (GR) is 10pcs as well as the invoice verification for 10pcs. However, weeks later, they performed a movement type of 102 to cancel 2pcs back to vendor, but no subsequent movements follow up.
    Now, the user wanted to delete this line item in PO, but the system throw out an error message:
        "Quantity delivered differs from qty. invoiced (Function not possible)"
        Diagnosis: You have attempted to delete an item whose GR and IR quantities differ.
    Is there any work-around or solution of how to delete this PO line item?
    Thank you and appreciate for helps.
    Warm Regards,
    Edwin

    Dear both,
    Thanks for the prompt reply. This particular material is not applying the "GR-based IV" feature. This is why the user is able to cancel the goods receipt without the cancellation of invoice first.
    The reason why the user needs to delete the PO line item for this material is because they need to change the valuation class of the material which they suspect this is the cause. They have clear all the stocks quantity, clear all the relevant open quantity but left this PO line item. They wanted to delete the line item so that they can change the valuation class.
    Does it mean that it has to use credit memo to clear the quantity? This transaction was posted in 2007, what would be the impact to FI if I post credit memo in 2008?
    Thank you very much for your helps.
    Warm Regards,
    Edwin

  • Project stock - sub-contracting - Challan matl is different from matl doc

    Hi,
    We have sub-contracted with project stock ( Special stock  Q ) materials to SC vendor.
    While doing challan reconciliation with J1IFQ , we are getting the error
    " Challan material is different from material document"
    We are on ECC 6 support pack level 16.
    Please advise solution.
    Rgds,
    Manohar

    Number ranges maintained for 57FC 
    Ser Grp    No                  Year               From                     To            Current number
    01              01     2009     0000000001     0000099999               226
    11             01                          2009     0000000001     0000199999                  18
    Is there a problem in this number range. For normal sub-contracting , we did not face any problem so far.
    Please advise.
    Rgds,
    Manohar

  • Order GI date different from Delivery Planned GI date

    Hi Gurus, I noticed on one order-delivery that the order's GI date (in the schedule line) is different from the delivery's planned GI date. What could be the cause of that?

    hello dear
    System is nowhere stopping to change the planned GI date in billing. If orders schedule date is say 15.10.2007, i can change the planned GI date to 16.10.2007 and so the billing date also.
    regards
    Inder

  • Output determation from delivery doc

    Ok I feel retarded for asking but here goes.
    On a delivery I can go up to extra\delivery output\header and then manual add an output type to print it.
    I just need to add that output type so it can just be selected from the displayed list, with out having to add it.   
    The output type selection will be based on delivery type.   
    Thanks

    OK let try to reword this.
    From a delivery that has already been created, then go to the menu extra\delivery output\header
    Ok on this screen there can be several output types that have been assigned to this delivery type.   There may be an EDI that has been processed and shows a green light.  
    Then there maybe a couple of yellow light output types that are ready to print, like a bill of lading, or a packing list.   These items will be manually printed when needed.
    Then you can select other output types by clicking on the green + button at the bottom.   Say a different type of bill of lading.
    Ok what I want to do as add one of the output types, that can be selected by pressing the green + button, to the opening screen.
    Or how do I assign a output type to a delivery type?
    Thanks
    Now you can also add

  • Does item category TAS allow to create Outbound delivery doc?

    Hi experts,
    I have a problem with the delivery creation.  The scenario is:
    Our vendor missed to deliver a part to us. Say for example he missed to delivery the screw (used to adjust the time) in the wrist watch. This part is supposed to be assembled together with the wrist watch & delivered to our customer.
    Now we need to deliver this missed part to our customer. The initial watch has been shipped to the customer without the screw. But the cost of the screw is already included in the total cost of the watch.
    Now the vendor is going to send us this screw.  So my requirement is to create a subsequent free of charge kind of sales order that triggers a PR to the vendor & once this PR is converted to PO, on the PO
    the Free Item will be ticked as the Vendor charged us for the whole wrist watch. This is also a kind of subsequent free of charge delivery by the vendor.
    When I use item category TAS it does generates the PR & I converted this to a PO to this vendor. I also did the GR for this PO.  But when I create outbound delivery for this subsequent free of charge sales order,
    it says the item is not relevant for delivery.
    Could you tell me how to handle this situation & what item category to use which will allow me to create
    Outbound delivery so that I can proceed to post goods issue & create 0 dollar invoice?
    Thanks for your help.
    Regards,
    Pri

    Check the item category configuration for TAS. It does not have the tick for 'Item relevance for delivery'.
    This can be seen in the following path:
    IMG > Sales and distribution > Sales > Sales documents > Sales document item > Maintain item categories.
    The idea of having a 3rd party sale (with item category TAS) is that the item is directly delivered from your vendor to customer. When you perform goods receipt of the PO, it will not ask for a storage location, since the product does not enter the plant premises.
    This is a one step method to dispatch goods directly. Hence the outbound delivery is not required once GR is done.  The next step is to enter a vendor invoice followed by customer billing document.
    If you check the accounting part of the GR material document it will be
    Cost of goods sold DR
    GR/IR clearing account CR
    However, in your case, since the material is a FOC, there should not be an accounting document, and hence no vendor invoice verification / customer billing.
    In standard, the item category TAS is relevant for billing. Hence if you do not require billing (being FOC), I suggest you use another item category (a copy of TAS) without billing relevance. I guess everything else should fall in place.
    Regards,
    Aroop

  • Assignment field value different from sort key

    Dear Forum,
    I notice in the customer line item, the assignment field value different from sort key.
    sort key for customer i maintain as doc number + fiscal year, but i notice some line item's assignment is not this information.
    for example, billing posting. some customer line item assignment is document + fiscal year but some are delivery number in assignment field. no changes made in log file.
    may i know why?
    thanks

    dear,
    as i did mention, customer master sort key no change and in the same customer line item, assignment field which carry delivery number also no change log.
    may i know where to see the subsitution? i do not think that is due to substitution.
    thanks

  • Item Number not getting copied from Delivery to Invoice

    Dear Experts
    I am having a problem where Item Number in Delivery is 10 and in Invoice it is 11. The item number is  not getting copied from Delivery to Invoice. I have checked the copy control option and copy item number is checked.
    Please advise

    Hi,
    In VOFA Item no. increment has already been maintained as "0" but the problem is still there.
    Regs

  • In the info bar at the bottom of the iphoto window, why is the number of items different from the total

    In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?

    What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
    If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected. 
    If you click on the Events icon and then back on the photos icon the numbers should match.
    OT

  • Commitment item 50210 differs from item in account (90050)

    Hi
    I am creating DPR (F-47) with PO field manadatory. While posting the document i am facing the following problem.
    Commitment item 50210 differs from item in account (90050)
    90050 is VENDOR DOWN PAYMENT A/c
    50210 isFixed assets gl account
    Thanks
    JK

    Hi Guru,
    We are tring to post the transaction with Spl GL 'O" for customer entry..,,but while we are entring profit center in the transaction the system is giving  "PO value is lesser than Order Value" but there is no relation with this error message because I am posting this tranaction in t-code F-02 manually.
    and I am not entred the profit center the transactio getting posted my user want to post with profit center and also they have posted same kind of transaction last month closing.
    Kindly help to resove this issue it is very urgent.
    Spl. GL Setting FBKP - * in downpayment/downpayment request.
    Thanks..
    Regards,
    John Pal

  • Commitment item 15030 differs from item in account

    Hi Guru,
    In Purchase Request level we are changing the commitment Item that time systme is giving warning message i.e.
    Item 00010: Commitment item 15030 differs from item in account (15070)
    Message no. TRCBCUSTOM001
    Can you tell how to change this warning message o Error message.  I have tried with OBA5 and SE91..
    Thanks in Advance..,,
    Regards,
    John Pal

    Hi Guru,
    We are tring to post the transaction with Spl GL 'O" for customer entry..,,but while we are entring profit center in the transaction the system is giving  "PO value is lesser than Order Value" but there is no relation with this error message because I am posting this tranaction in t-code F-02 manually.
    and I am not entred the profit center the transactio getting posted my user want to post with profit center and also they have posted same kind of transaction last month closing.
    Kindly help to resove this issue it is very urgent.
    Spl. GL Setting FBKP - * in downpayment/downpayment request.
    Thanks..
    Regards,
    John Pal

  • Quantity is different from sale order and delivery

    Hi,
    Gurus,
    Quantity is different from sale order and delivery.
    I identified the Material in the sales order, the item category for this material as BOM.
    I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
    Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
    My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
    My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
    Note:- The material X is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
    The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
    Guide me GURUS.
    Thanks and Regards,
    ANAND

    Hello Rumar
    I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
    In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

  • Line Item Sequence

    Hi Gurus,
    When I create a F2 or F5 invoice, the line item sequence copied is different to the sequence in the sales order. Could you tell me how I can overcome this?
    Many Thanks
    Kumar

    Hi ,
    Please check the copy control setting from sales order to Billing in the transaction VTFA.
    In the there is one option   / check box  copy item number.
    The functionality of it is , it  will copy the item number from the source document to the target document.
    Hope this clears.
    santosh

  • How can I fix a xquery resulting error ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence  - got multi-item sequence

    Hello,
    How can I improve the XQuery below in order to obtain a minimised return to escape from both errors ORA-19279 and ORA-01706?
    XQUERY for $book in  fn:collection("oradb:/HR/TB_XML")//article let $cont := $book/bdy  where  $cont   [ora:contains(text(), "(near((The,power,Love),10, TRUE))") > 0] return $book
    ERROR:
    ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence
    - got multi-item sequence
    XQUERY for $book in  fn:collection("oradb:/HR/TB_XML")//article let $cont := $book/bdy  where  $cont   [ora:contains(., "(near((The,power,Love),10, TRUE))") > 0] return $book//bdy
    /*ERROR:
    ORA-01706: user function result value was too large
    Regards,
    Daiane

    below query works for 1 iteration . but for multiple sets i am getting following error .
    When you want to present repeating groups in relational format, you have to extract the sequence of items in the main XQuery expression.
    Each item is then passed to the COLUMNS clause to be further shredded into columns.
    This should work as expected :
    select x.*
    from abc t
       , xmltable(
           xmlnamespaces(
             default 'urn:swift:xsd:fin.970.2011'
           , 'urn:swift:xsd:mtmsg.2011' as "ns0"
         , '/ns0:FinMessage/ns0:Block4/Document/MT970/F61a/F61'
           passing t.col1
           columns F61ValueDate                Varchar(40) Path 'ValueDate'
                 , DebitCreditMark             Varchar(40) Path 'DebitCreditMark'
                 , Amount                      Varchar(40) Path 'Amount'
                 , TransactionType             Varchar(40) Path 'TransactionType'
                 , IdentificationCode          Varchar(40) Path 'IdentificationCode'                 
                 , ReferenceForTheAccountOwner Varchar(40) Path 'ReferenceForTheAccountOwner'
                 , SupplementaryDetails        Varchar(40) Path 'SupplementaryDetails'       
         ) x ;

  • Valuation type to pick from delivery in Goods receipt of STO

    Dear experts
    In case of STO, the material is Split valuated (Say RM local & RM Import). STO is created for 1000 qty with Valuation type of RM local.
    But delivery is done in 2 steps with both the valuation types (say for e.g 1st delivery with valuation type RM Import and 2nd with RM Local)
    When I do the goods receipt against the Outbound delivery, in Std system, it will fetch the valuation type entered in STO (PO), but the requirement is to take from Delivery.
    Please suggest Solution for this (BADI or any User exit)
    Regards
    Muthu

    Hi
    The requirement is such that client does not want to split the Quantity in PO, as they don't know how much quantity will be delivered from different valuation types. So that SAP note may not be helpful
    Anyway thanks a lot for your suggestion

Maybe you are looking for