Stolen device with BB Protect installed
Hello,
my curve got stolen. I had BB protect installed and tryed locking the device online. The meassage coudn't be sent though.As Protect works PIN specific it is ultimately connected to the device right? Meaning it is impossible for anybody to ever use it on the network without the password set by me?
I want to turn the phone in a worthless piece of plastic!
Thanks for your attention and any answer in advance.
Cheers
Jan
Hello,
Everything useful on the topic is contained within this existing thread:
http://supportforums.blackberry.com/t5/BlackBerry-Device-software/Lost-or-Stolen-BlackBerry-What-to-...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
how to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and with or with virus protection on here is post " This installation package could net be opened verify that the package exist and that you can access" same when trying to install quicktime
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
"Apple Mobile Device Support" doesn't install with iTunes
When I install iTunes 11.3 on my pc "Apple Mobile Device Support" doesn't install.
The installer installs
Apple Application Support
Apple Software Update
Bonjour
iTunes
But it doesn't install "Apple Mobile Device Support"
My OS is "Windows 8.1 64bit"
i have ESET Smart Security installed on my PC but when i want to install itunes i disable it .
i removed and installed itunes completely several times but it didn't help !
sb help me pls !!!!For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
tt2 -
Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I can't install iTunes 10 on mac os x; therefore, I can't sync new iPod devices with my old iTunes version 9?
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
My MacBook with all the installed Apps got stolen...
My MacBook with all the installed Apps got stolen...I have changed my password and so on... I have the Apps also running on my iMac and as far as I know, I am only allowed to have them on 2 Macs...how can I "delete" or "block" the set that is on the stolen MacBook? Thanks :-)
Remove license on a computer http://forums.adobe.com/thread/1442423?tstart=0 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html -
I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help
try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.
-
ADE not recognizing device although device came with adobe reader installed
i have a tablet that came with adobe reader installed, and i have authorized my ade on my laptop, i have an adobe ID and have downloaded the books already. the ADE wont read my device and i dont know how else to put the books onto my adobe reader. please help
This thread is pretty old, are you still having this issue?
-
I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabled. I don't know if it's talking about a new version of iOS on my iphone or my laptop. You people sure like to make things difficult.
trevbeats,
I had the same problem. It turned out the issue for me was that I had Automatic downloads turned off on my devices!
see below how to turn it on.
Tap Settings > iTunes & App Stores on your device.
Tap Sign In if you're not already signed in to the iTunes Store.
Enter your Apple ID and password.
Tap On/Off switch to enable or disable Automatic Downloads for each content type. -
Hi all!
I've activated a new iPhone 6 (iOS 8.1.3) from the backup of the previous device and all pre-installed iWork apps got lost. How do I get them back? AppStore downloads are offered with a fee. Any advices?
Thanks in advance.
HaraldHi Ingo,
thanks for your help. Your hint didn't solve my problem but pointed me in the right direction.
When I wanted to activate my new phone from backup I realized, I didn't knew the password. It was noted on a paper at home. So I activated the phone free cause I couldn't await coming home ... a new toy!
Due to GameCenter I have two apple-ids and unfortunately I took the wrong for the activation.
Back home I've reset the phone and activated it from backup. The iWork apps disappeared and now are linked to the other apple-id.
I was able to re-install the apps from AppStore for free. But I don't think I can transfer the apps to the other id.
Thanks a lot
Harald -
One computer crashed, the other was stolen along with iphone. I just got new computer & am trying to retrieve music from Icloud/itunes but it won't let me - says I need to deauthorize previous devices - how can I do that without the devices?
Deauthorize all.
Then authorize the active computers. -
I have a storm 9520 and a curve 8520 and had installed the blakberry protect, bu right now when i sign in to the blackberry protect for both, it takes me to the curve 8520 details. Please how can this be rectified as my storm " has been stolen and I would need to locate, wipe and shut down the phone. Thank you
Sign in to the BlackBerry Protect application using a different BlackBerry ID
1. In the BlackBerry® Protect application on your BlackBerrydevice, press the Menu key > Options.
2. In the BlackBerry ID section, click Sign Out.
3. Click Sign Out again.
4. Type the login information for the BlackBerry® ID that you want to use to sign in to BlackBerry Protect.
5. Click Sign In.
Switch devices using BlackBerry Protect
To perform this task, BlackBerry® Protect must be installed on your current BlackBerry device.
You can use BlackBerry Protect to move supported data from your current device to a new device.
1. On your current device, back up your data.
2. If necessary, on your new device, install BlackBerry Protect.
3. Complete the setup process.
4. Click Switch Device or manually start the restore process. Select your old device as the device that you want to restore data from.
Delete a device from your BlackBerry Protect account
1. Log in to the BlackBerry® Protect web site.
2. On the left side of the web page, click Your Devices.
3. If you want to delete all of yourBlackBerry device's backup data from BlackBerry Protect, clear the Keep Backups check box beside the
device that you want to delete.
4. Beside the device that you want to delete, click Remove.
5. Click OK.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution" -
Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated space.
Step 2: You have to enter the machine Bios adn set the BIOS to Both and UEFI as first
Step 3: Connect your usb dvd
Step 4: Put your win 7 pro dvd in the usb dvd drive
Step 5: Reboot your machine and when it starts press F12 to get the boot menu and select the usb dvd drive then press enter
The machine restarts
Message on screen says press a key to boot from cd/dvd
Press space and it boots up the win 7 pro DVD
After files copy and load the setup screen asks to accept the agreement and where to install win 7
BE SURE TO SELECT THE 80GB location
Then follow thru the win 7 prompts to load it.
When the machine restarts you will see a dual boot screen with Windows 7 on top as first selection and Windows 8 below it as 2nd selection.
Make sure to hit enter with windows 7 selected
The win 7 installation completes.
You will see many items with drivers not installed dont fret.
You can load most of the drivers by highlighting the device in control panel/device manager and pick update driver then select BROWSE for DRIVER and be sure to put in drive D:\ which is now the windows 8 drive and hit search.
Many of the windows 8 drivers installed with no issue.
The Realtek driver was an exception .. goto to the lenovo site and pick the x100e tablet and download the LAN driver from there about (4MB). Copy it to flash drive and install it in win 7 from the .exe file. The driver for LAN will install sucessfully. The version of the driver is 7.46 something the 7.11 versions do not workl.
I have only 3 drivers that I could not find - 2 list as unknown and are related to ACPI or power management and 1 lists as USB controller but all the USB stuff works without it.
Be sure to either shutdown the system or sign out of win 8 when your done so you get the dual boot menu. If you shutdown while logged into win 8 the next time you start up it will go right to win 8 until you signout and restart.
Just to let you know an easy way to shutdown is go to the desktop and press ALT + FN + F4 and a shutdown menu comes up on the desktop.
Once win 7 pro is installed you can download the XP mode free from Microsoft and install it.
This is of course AFTER you have ACTIVATED WINDOWS 7 ONLINE with YOUR ACTIVATION KEY(you supply).
ENJOY! This is the BEST machine I ever had!It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^ -
Problem with Set/Get volume of input device with single channel
from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help. -
How to synch two different devices with two different Apple ID's without merging them?
I have an iPhone 5 and iPad linked to my Apple id. My son just got his first iPod touch with his own Apple id. We use the same PC to backup and synch our devices.
The problem I have is since he got his iPod touch, all his downloads get installed on my devices, and we don't want that. Can someone help me by explaining to me how we can use the same iTunes and the same computer to backup and synch our devices, without having his apps install on my devices?
Thanks in advance!
PabloHow to use multiple iPhone, iPad, or iPod devices with one computer
Maybe you are looking for
-
Mid year Go-Live (India Payroll)
Hi, My client's business is now in ECC 5.0, Now we are going live on 01.01.2010 in ECC 6.0, this is not upgradation project, its a fress implementation so please tell me what all are precautions i need to take before going live on 01.01.2010. as this
-
Problem ADF af:document i18n
Hello, I tried to use SRDemo application as a base for mine, but I've got a problem with encoding. I wrote smth like: <?xml version='1.0' encoding='windows-1251'?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0" xmlns:af="http://xmln
-
Getting total number of instances (objects) running in a JVM
Hello, Is there any way to get total number of objects in the heap of a JVM without using any profiling tools like JProbe Regards, Nikhil.K.R
-
Hi all, I'm working on rebate. I found this situation: for the agreement I'm working on, the Rebate recipient is different from the customer in the condition type. How that is possible? I think they must be the same could you please explain?? thanks
-
IPhone 4 will not sync with Lion
Have seen multiple posts that are similar to my problem, but not exact so thought I would post the issue here: MacBook Pro (2.8GHz Core 2 Duo) 8GB 500GB 7200rpm Seagate Momentus MS Outlook 2011 iTunes 10.4 The Lion upgrade was pretty much flawless -