Stop auto page insert

Hi
I'm new to Pages. I'm trying to create a newsletter template that's essentially and opening page, and then more pages each with a double column text box.
In layout view I'm creating a text box on each page, pulling it out to fit the page layout area, making it a double column using Inspector....but, I cannot stop it automatically creating a fifth (and even sixth) page as I create the text box on the third page. It seems to be something to do with the page height. It's all OK until the text box gets closer to the bottom of the page, and then bingo, another page appears.
It's hugely frustrating and I'd value any ideas as to why, how to stop it or ideally how to turn off the auto create of new pages. I only want four!!!!
Thanks

There is something surprising in your description.
Which kind of document are you working upon, Word Processor or Layout ?
In Layout documents, I never saw a page created without an user action.
In Word Processor, as far as I know, the creation of new pages is ruled by what we insert in the main text layer, not by the floating text boxes.
In this mode, I'm not sure that you really need to use text boxes.
In page one you may use the main text layer in full width then insert a layout break or a section break to be able to work with the same layer with two columns in other pages.
Given that, it seems that something is missing or odd in what you wrote.
Yvan KOENIG (VALLAURIS, France) vendredi 29 octobre 2010 21:41:17

Similar Messages

CS4 auto page insert: master page frame or not

In CS4 the preferences for auto page insert allow to turn off 'limit to master pages'.
However, don't see much difference wether it is on or off. The Help file states that if you do NOT use master text frames, a new textframe should be inserted, one column between the margins.
Can not get this to work when limit to master pages is off. What am I misreading...?
(It is funny sometimes: I have 'delete empty pages' checked (it is on). Now make a document 3 pages long. OK, now draw a empty text frame on page one. Do the same on page 2.
Now connect both text frames: page 2 disappears. This is to be expected but be aware of this.
Now insert text in the textframe on page one that does not fit totally in this textframe: overset symbol appears.
Now where is page 2 that was 'auto deleted' and had the threaded text frame?
Nope, it does NOT appear again!
I admit I still have to get to grip with this, so what DOES the switch 'limit to master pages' on/off have for effect...)

Yes, I know. But maybe my point came over the wrong way. If you have auto page delete on, you have three pages and a textframe that spans page 1 and 2, but not yet text in it, and you connect the empty text frames, page 2 will disappear. Now fill page one with overset, page 2 won't do anything because it needs two pages.
Disable auto page delete and it will work.
Just wondering why it was designed this way, that's all ;-)

Sync error stops auto-refreshing pages

web pages that automatically refresh, stop doing so when FF7 Sync can't connect to the server. A box is displayed at the bottom of the screen explaining that a recent sync failed, but this also stops any pages that refresh automatically.

Thanks for the link to this particular thread, Tbilisoft. The one started by Pierregy was especially interesting, since many people obviously get this error and have had varying levels of success with it.
I actually already knew about the "delete Intellisync folder" fix because Blackberry phone support had given me that as a final thing to try, if downloading and installing the latest DM 4.7 didn't work. After deleting Intellisync, I would be fine for one sync, maybe two, then I'd be back to errors that kept me from completing a sync.
That was a real pain, because I had to keep reconfiguring my sync every couple days. Also, in doing this, I sometimes forgot to remove the Task relationship for Start Date between the device and Outlook, which creates another problem -- Tasks would suddenly get weird dates for decades in the past/future after my sync. This "delete Start Date relationship in Config/Tasks/Advanced" fix does work, BTW, in case anyone reading this thread ever has that problem.
For me, the final fix (hopefully) was that I had a couple of Outlook meeting dates where the creator of the meeting had change just one instance of that meeting and all users' calendars were updated. I realized that the same couple meetings kept reappearing for me to reject/accept during sync, so I went to my calendar and deleted those meetings' series, replacing them with a new, "clean" recurring meeting from the current time forward. That finally (and again, hopefully) got my sync running more consistently.
Thanks, all, and happy sync'ing! ~ aagg03

Safari randomly stops opening pages

Hi Everyone,
Since upgrading to Yosemite, Safari randomly stops opening pages. It works for a while, then if I put my computer to sleep, sometimes when I wake my computer, Safari will no longer opens pages. When this happens, all apps requiring internet are affected including Firefox and Chrome which no longer work, as well as mail and iMessage.
They only way to get it to work again is to reboot my computer - sometimes I need to do this several times.
I have deleted Safari preferences to no avail.
Can anyone suggest a solution?
Thanks
TB

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i 'kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Cross-reference auto-page numers?

Can anyone tell me why i cannot get cross-references to work with automatic page numbering? Is there some fundamental error i am making? I have the master files setup with auto-page numbering based on 'current page.' All of my pages are numbered sequentially as 1, 2, 3, etc. and setup with a unique paragraph style. however, when i try to reference a page number in the document, none of the pages show up under the paragraph style in the cross-reference menu. I have even tried to use ctrl+shft+click on the desired reference page to bring the page number frame from the master file onto that specific page, but the text still does not show up in the cross-references menu. I feel as though i must be making some sort of mistake because it seems this could be one of the more obvious/widespread uses for the cross-reference feature. Any help would be great. Perhaps there is simply another way to do this? Thanks!
Garrett

GarrettTV wrote:
Peter,
I understand that this is probably a more specific use of the feature, no doubt. It is ultimately unrealistic to expect a program to work exactly as each individual user's project approach dictates. I dont take the comment as a slam, dont fret.
My confusion and concern ultimately stems from the fact that, on the surface (granted, I am definitely not a programmer ), it seems like the ability to directly reference the page number would be, almost inherently, already built-in in the sense that the page number is recognized as a product of content placement. In other words, if the cross-reference knows that changes to the document composition have caused my referenced content to move from auto-numbered page 36 to auto-numbered page 37, yet the reference cannot exist to simply the page number itself. It has to exist via the content on taht page. Hopefully I have provided and explanation which makes sense!
In all honesty, the ability to reference only content and not also page number is only goingot set me back about half. For my sake, I have a 300 page document which includes hundreds of figures/illustrations, all of which correspond to text explanations in a different part of the document. Over time, it is anticipated that standards and graphics will be added/subtracted/changed, and therefore, so will the section numbering, page numbering, figure numbering, and the corresponding pages on which all of these pieces of info will occur. We would like to correspond figures and sections to one number; in this case, the page. Because each figure/illustration will have it's own page, it is desired to make the figure number and page number match to achieve an easier means of navigating the book. Basically, I want the text section, which will be read first, to reference figure numbers and/or page numbers (at this point, i have the option of choosing one or the other), but both of these numbers are going to dynamically update.
So, if that made any sense at all (ha), is there a way to use the cross references to point at a number that is set to automatically/dynamically change? If there is not, then perhaps I will simply have to create static figure numbers for the referenced content and then just let the page numbers change over time. If you have any other suggestions, I am definitely open to exploring them!
Thanks for the continued help!
Garrett
Hi, Garrett:
If I understand your description correctly, it seems that you're asking for an unusual numbering/navigation approach. Is there an example that you've seen that works this way, and that you want to emulate? Is this a publishing style/convention in the particular industry?
Am I correct in imagining that in a document that contains three figures on discontiguous pages, they might be numbered something like this:
Page #
Figure #
1
1
15
15
250
250
This would result in no figures 2, 3...14...249. Would your document have references to figure 15 on page 15? Would you want your list of figures (LOF) to resemble:
Figure number and title Page
1. Example of the widget in question ............................. 1
15. Example of another widget ......................................... 15
(sorry about the messy table layout - the HTML is tricky)
Would your audience be concerned that the figure numbers are not consecutive across a multi-chapter book, or consecutive within a chapter, and restart in each chapter? That is, would a reader think that some figures are missing?
Is there a specific objection to figure 11 on page 26 becoming figure 11 on page 28, if text content were inserted, or becoming figure 16 on page 29 if figures were inserted? When numbered-list paragraph styles and cross-reference formats are set up properly, cross-references to these figures would update to indicate both the correct number and correct page.
Have I misunderstood something?
[EDIT]
I forgot to ask if your document will be using cross-references interactively in a PDF or other multimedia format. If so, can you give more detail on your expectations?
Have you looked into InDesign hyperlinks? They can refer to a page number - either "sticking" to the designated page no matter if its page number changes because of reflow or being moved, or "sticking" to whatever happens to become the "n-th" page if the original page is relocated. Search Help for Create a hyperlink to a page.
[/EDIT]
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Message was edited by: peter at knowhowpro

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second image does not show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.

I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario.
If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over. Nice effect with much less bandwidth. Easily done globally with CSS code.
Two examples:
http://alt-web.com/GALLERY/GalleryTest.php
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
Nancy O.

Why is there a thick line in the page margin when I use auto page number?

I am having a problem with an automatic line which appears in the left, in the page margin, outside the footer whenever I insert auto page numbering into a booklet. This line looks like a thick "l" and is on the left of each page despite the numbers being on the 'outside' (alternate sides) of each page.
The line only disappears when the numbers are removed. I cannot highlight/edit the line and they show up as short thick marks, the height of the font on each numbered page when the document is printed.
Does anyone know how I can get rid of them?

Thank you, fruhulda.
Actually that is what I am doing as a workaround. It works but it requires me to make an unnecessary extra copy of the document. And after doing that, I sometimes carelessly keep working on the copy instead of the original, which results in untracked modifications. So I hope there should be a way to just hide the lines.
If there's no option to hide them, I think this is a bug of "View Final" mode, in which the document should be viewed in the "final" form.

Stop auto-capitalization after i.e. or e.g.

anyone have an idea how to stop auto-capitalization after typing "i.e." or "e.g."?
I would like to retain the auto-capitalization for starting sentences.
Thanks!

I don't see that behavior on my Mac.
Really? So in Pages > Preferences > Autocorrection, you have the box for Fix Capitalization checked, and when you type something like " i.e. the" you do not wind up with" i.e. The" as soon as you hit the space key?

How do I stop "auto Renewal" purchases?

My daughter has used my iPad and downloaded app game. Now every week I get an automatic $2 taken out of my bank account from iTunes titled " automatic renewal"... How can I stop this from occurring or cancel this?

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

Auto Page Number Change Font or Delete?

After translation from Word to Pages, the auto page number font causes the third digit of the page number to appear outside margin of header. How can I change font or delete and put in new page number?

Usually the page numbering from Word are have objects that are not selectable. That is until you have made them selectable by going Arrange > Make background object selectable. You might need to go Format > Advanced > Make Master object selectable too.
Delete them and use Pages version instead, Insert > Page Number

HT2731 How do I stop auto-renewal on Sing?

How do I stop auto-renewal on Sing?

Try this steps on your computer and check this link:
iTunes Store: Purchasing and managing auto-renewing subscriptions
http://support.apple.com/kb/HT4098
1. Launch iTunes on your computer.
2. Choose Store > Sign In from the iTunes menu.
3. Enter your Apple ID and password when prompted.
4. Choose Store > View My Account. You m ay be asked to re-enter your Apple ID
password. Click View Account .
5. From the Account Information screen, scroll to the bottom of the page to the Settings
section.
6. Click Manage to the right of Subscriptions.
7. From the Manage Subscription screen click on the subscription that you would like to manage.
8. On the Edit Subscription screen, you will see the current subscription status and
subscription details.
9. Click the Off radio button to turn off Auto-Renewal.
10. You will see a confirmation window asking you to confirm.
11. Click Continue to proceed.

HT201359 I want to stop auto renewal of Abode reveal.How can I do it?

I want to stop the Auto renewal of abode reveal. How can I able to do it?

If you are being billed through iTunes then there are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

HT1918 I want to stop auto renewal of Hulu Plus. I went to the Apple Store, Account information, but do not see my hulu plus account anywhere.

I no longer want Hulu Plus to be automatically renewed every month. I went to the Apple Store, my account, but do not see Hulu Plus anywhere in order to Edit this renewal information. Please advise!

Are you sure that you are being billed through iTunes and not directly through Hulu ? There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
But the Hulu website only seems to mention cancelling via them : http://www.hulu.com/support/article/203239

How can I stop auto download of attachments without tapping on them? Once I open a mail, the attachment automatically starts downloading, though it is written as "tap to download". Please help..

How can I stop auto download of attachments without tapping on them? Once I open a mail, the attachment automatically starts downloading, though it is written as "tap to download". Please help..

To the best of my knowledge, there is no way to prevent the automatic downloading of the SD version when you buy an HD show.
You can, if you wish, suggest that the ability to prevent the SD version from downloading through the iTunes feedback page. But since the SD version is needed for use on iPods and there at least at present is no mechanism for someone to download the SD version at a later time should they decide they need it, Apple may just continue to force the downloading of both versions. If they get enough feedback on the issue, though, they may figure something out.
Regards.

Start Auto-Page Numbers a Few Pages In

Just like the title says.
I'm writing a long paper, and in the footer I wanna put in auto-page numbers on the third page. If I select the third page and then turn the setting on, it just starts on the first page! How do I start the numbering on the third page?
Thanks a ton!

Put in a section break at the end of the 2nd page:
+Menu > Insert > Section Break+
Then go to 3rd page:
+Inspector > Layout > Sections > Start at: 1+

Stop auto page insert

Similar Messages

Maybe you are looking for