Stop during viewing of HD-movie in stream mode

Ladies and gentlemen,
I had problems with Apple TV
Chart of my connecting:
*Apple TV <–> AirPort Extreme (802.11n ( n-only )) <–> iMac 24 (C2D) <–> external HDD WD MyBook 750 gb (FW800)* .
I convert a HD-movie from the .mkv ( +KLCP Matroska File , Video: MPEG4, (H264) 1280x544, 23.98fps, Audio: Dolby AC3 48000Hz stereo, filesize 4,5 gb+ )
I convert a movie in Visualhub. In the parameters of this program specify that a format on an output must correspond the format of Apple TV. I get a Mp4-file
I plug Apple TV in the ”Streaming” mode, аnd begin to look a movie. Some time all shows fine, but in 10-15 minutes play is stopped (a picture is frozen, sound is stopped), after press pause/play, I can again continue viewing, but after a while problem will repeat again.
I noticed that precipices were halted 50% film, and stops take a place only at the active stages of film (moving car, explosions, or any other quickly-moving objects)
I will be beholden for elucidations of my question.
With kind regards
Message was edited by: megadzilla

Actually that isn't what I suggested.
I suggested you convert from matroska to DV and then from from DV to .m4v
If there is an error in your conversion from matroska to h364 with visualhub that error won't disappear by reconverting it.
If you don't wish to try what I suggested, open one of the files you are having trouble with in QT, open the inspector window and tell us what it says, I suspect it will seem OK but we can have a look and see.
Of course your problem could be a slow network, but if you don't wish to diagnose your problem it likely won't get solved.

Similar Messages

  • Viewing a Captivate movie in streaming

    Hi -
    Would appreciate receiving help in how to publish my Captivate movie so that viewers can view it while it's streaming and not downloaded before viewing  begins.
    Thanks in advance,
    DGR2

    Hello again
    I may be mistaken here, but I think what you are looking for is a preload. So to set this (assuming you are using Captivate 5) click Edit > Preferences > Project > Start and End. There you should find the ability to configure a Preloader.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • AppleTV stops during playback on owned movies

    Been happening for months through different updates.
    Essentially what happens is:
    - I turn on my mac
    - I then turn on my TV & AppleTV
    - I start watching a video
    - Somewhere in the playback the video stops and the message "Please turn on homesharing to watch blah blah" comes up.
    - I go to my mac and Homesharing is still "on"
    - I turn off home sharing, then turn it back on and AppleTV sees my movies again.
    At this point it usually works for 10-15 minutes but then the same thing happens again and again.
    This has been happening for several months. One interesting thing - it rarely happens with rented movies, only with movies I own and stream through my computer. I've turned off Sleep mode but no change.
    Thoughts?

    Any security software that might be blocking repeat AppleTV <> computer communications ?

  • Is there a way to make YouTube download my selection completely before playing (like you can do with songs on iTunes)? I'm getting sick of start and stop during viewing!!

    Apparently I typed my entire question into the subject line without knowing what I was doing!
    I want to FULLY download selections from YouTube before attempting to view them. Just like you can select to fully download the samples of songs from iTunes. I am sick of the **** YouTube video going in and out, especially when I'm also downloading something else at the same time!
    Please tell me how to set this 'preference,' if there is a way!
    Thanks !
    David

    Sounds like you did this on the fly.
    MM is supposed to open the Marker Panel Dialogue
    M just sets a marker
    Not sure if either are intended for on the fly during playback .
    There is also a Marker Icon on the Source Window Pane  >>

  • My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

    My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
    Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
    Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
    thanks.
    Sorry my bad Inglês.

    Try a reset hold home/sleep buttons until Apple logo appears
    If that does not improve try a restore
    http://support.apple.com/kb/HT4137
    For your information
    We are NOT Apple here we are all users helping other users
    so emotion is ignored

  • While watching rented movie it stops during playback, how do i fix it?

    I rented a long movie and it continues to stop during playback, how do I fix that?

    Hi dedesgirl,
    Welcome to Apple Support Communities.
    It sounds like there is an issue playing songs in iTunes. Does the playback issue only occur with specific tracks and were they purchased from the iTunes Store? Take a look at the article linked below and try the suggestions which will resolve most iTunes and QuickTime Player playback issues.
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    I hope this helps.
    -Jason

  • HT1600 my apple television keeps stopping during the movie, i have a good internet connection but cant understand why?

    My apple tv  keeps stopping during the movie, I have a good internet connection but cant understand why?

    The first thing to check would be your internet download speed, you can do this atwww.speedtest.net.
    1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • Apple Tv stops during movie several times to load. Very ANNOYING

    Why does my Apple Tv stop during movie several times to load. Very ANNOYING

    This will be due to the network.
    What is your current connection vis speedtest (needs at least 6mbps)
    Make sure DNS is set to auto (setting - general - network)
    If on wifi try ethernet

  • Sound stops during automation recording.

    Alright here's a video example of what I'm talking about.
    When I'm doing a "Touch" Automation on one midi track, while recording a touch track the midi sound stops as soon as I move the slider.
    The automation still records, it's just that the sound stops during automation.
    In the video notice that as soon as i move the Volume Automation slider the midi playing
    stops. Why? I need to be able to monitor this while I'm adjusting the automation.
    Appreciate anyone's suggestions.
    It's Logic Express 8.0.2 by the way.
    http://s177.photobucket.com/albums/w238/perrycomo/?action=view&current=Example1. mp4

    NoSound problem with headphones? With speaker?
    If only with headphones have you tried another pair of headphones?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Proper way to stop an in-progress Netflix movie?

    Yesterday I started watching a movie on my TV using the Apple TV and Netflix. After a bit I decided to not continue watching, so I pressed the Play/Pause button, then was navigating through some menus (I've only had the ATV a few days) and later tried to stream some contents from iTunes. When I was trying to stream some video from my computer, the menu screen opened up not full-screen but about half-size and off to the side, and there was what looked like the image of a movie theater on the other side (flickering lights, a screen and people's heads). When I tried to stream the video the ATV had a lot of trouble - it stuttered and flickered a lot, this was new it had no issues before. I think I just didn't actually turn the movie off like I thought and the network couldn't handle playing a movie and streaming from my computer at the same time.
    Q: what is the proper way to stop an in-progress Netflix movie? I go to their website and log in and get an option to 'resume' but not discard/cancel. I don't know that the Apple TV will work properly til it isn't trying to play a movie as well as whatever I'm asking at the time.
    Q: if I get the same visual as I describe here (is this normal?) how would I navigate back to the movie? (the remote wouldn't let me do that)

    As per Speedtest.net, 7 mbps
    It looked too much like a movie theater to be a glitch (cohesive image, not just flickers or such). Plus the menu screen resized itself and moved over to the right.
    Netflix viewing has been just wonderful, I've been very happy with the experience thus far. The computer was asleep when I chose the netflix movie off the ATV menu.
    I've found that when I log in to the netflix website, most of the movies I've watched (in full) are listed as being incomplete and give me the option to resume. Not sure what's up with that.
    I just want to make sure the ATV is doing one thing at a time (:

  • What is causing, and how do you fix, a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1

    What is causing and how do you fix a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1.
    It stops then after several seconds (like 25 secs) then it starts again ... and then several seconds later it stops again!
    I have the latest software so I don't know what to do?
        David V.

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Transcoding stops during audio stage

    I am trying to burn PAL system DVDs from Encore.  I have done this several times successfully, but all of a sudden I can't make it happen.  At each attempt, transcoding stops during the transcoding of audio.  No dialogue box opens - the progress bar just halts, and no further progress is made.  I've tried setting the audio transcoding codec as Dolby Digital, MPEG-1 and PCM, but that doesn't help.  In each case the project was created using Premiere Pro CS4.  When I then press "Cancel" in the "Build Progress" box, I get the following message:
    Premiere Pro is closed at this stage.
    Can anyone help, please?
    My system:  Windows 7 Professional 64-bit, Intel Core i7 chip, 12 GB RAM, twin 1500GB hard discs.

    Thanks very much Hunt.  Or Bill.
    I have been addressing the issue all day with no joy.
    I now strongly suspect that it is due to dropped frames on capture.  I was not previously worried about these frames because, so far, the DVDs I have been burning did not need to be good quality, so the odd little flicker of dropped frames was not a problem.
    But I'm losing lots of frames on capture.  Roughly every sixty seconds, a litle batch of roughly 12 get dropped, and a very quick fffft appears on the soundtrack.  It's very regular - you can see the even gaps between the little bursts of static on the audio track.
    I have tried everything I can to stop the dropped frames:
    Defrag discs
    Switch off wireless router
    Turn off every application and process I can, including my Norton anti-virus and firewall
    Detach peripherals
    Save to a different hard disk
    Use a different programme (Windows Movie Maker) to capture
    Capture from the same MiniDV tape but in a different camera
    Nothing makes any difference.  Might you or anyone else have any suggestions?
    Oh, my sound tracks are exactly the same length as the video tracks - thank you - but I'll try making them shorter.
    Thank you in advance.

  • Stop playing music or a movie!

    New To Apple TV
    How do you stop playing music or a movie other than hitting "PAUSE"
    Is there a way to shut down A TV other than pulling the plug?
    Thanks

    if you call multiple threads with say an overall 100K views with hundreds of comments a small userbase then I'll buy that for a dollar! all this since the last 2 updates to itunes???
    But I guess it is always the same thing it's not apple it is the user or they are dumb and have no idea how to set up a network???? Even though most apple users just plug in the router, set a password and let sleeping dogs sleep!

  • My hp support assistance wont run. it keeps stopping during updates and when deleting the temporary

    My hp support assistance wont run. It keeps stopping during updates and when deleting the temporary internet files. So it never finishes the process.. help

    The failure to remove the Temporary Files could just be due to having your internet connection active during the removal process.  For most folks, the amount of data in this directory is minimal.   If you want / need to remove the files, you could close your browser(s), make sure your Internet music and TV connections are closed, and then try removing the files manually:
    Path to Folder:
    C:\Users\--YourAccountNameHere--\AppData\Local\Microsoft\Windows\Temporary Internet Files
    Warning: 
    Do NOT remove the "Temporary Internet Folder" itself.  Go "inside" the folder before removing anything.
    ==================================================​==================================
    The HP Support Assistant is great when it works -- and not so great when it won't cooperate.  You can try removing the program from your computer and installing it again.  That may work.
    Control Panel > icon view > Programs and Features >
    Scroll down, find, and Uninstall HP Support Assistant.
    Restart your computer after uninstalling the existing version of Support Assistant.
    Install Support Assistant
    HP Support Assistant
    Using HP Support Assistant (Windows 8)
    Troubleshooting HP Support Assistant
    NOTE:  At writing, there are possible issues with HPSA version 7.x -- you might want to sitck with version 6.x for now.
    ==================================================​====================================
    If you have issues removing your version of HPSA:
    Fix problems with programs that can't be installed or uninstalled
    ==================================================​===================================
    Workaround to get Updates:
    If all avenues fail to bring joy and it just won't work, you can still get your updates from your computer's website.
                                                      ​         Install Software and Drivers from HP Website
    Go to the top of the HP forum page to Support and Drivers
    If prompted, Enter your Country or Region and
    Enter your Computer Model information,
    Go to Software and Drivers...
    Enter your Operating System in the Drop-down menu...  Scroll down
    Select desired Category
    Expand and decide if you need to install that package.
    Assure that you download and install only the most recent versions of each driver or program.
    Save the appropriate *.exe installation package on your computer
    NOTE the name and the location - the *.exe file will likely save to "Downloads “
    Install the Software / Driver installation package:  If you have ‘Admin’ control, you may highlight the package(s) and “double-click” to install, else Right-Click, Select ‘run as Administrator’ and install.
    NOTE:  There is sometimes a lot of information at the computer’s website.  Be sure to take an extended look at what’s available.
    ==================================================​====================================
    Good Luck!
    Kind Regards,
    Dragon-Fur

  • Is there a way to stop Icon View from putting everything in rows?

    I have a couple computers now with Lion, but I miss part of my old Finder view. Is there a way to stop Icon View from putting everything in rows when I do a "sort by" arrange by? I just want sorted icons, not a row of types.
    For instance - I set to arrange by date created and I have a ROW of "Today" A ROW of "Yesterday" another row of "Previouse 7 days" and another row of "Previous 30 Days." I just want a sorted folder of files in icon view listed by created date. These "Rows" are annoying and a pain in the butt to use!

    that´s the point. you are using the wrong sort option. if you want rows you arrange by the button depicted above. in addition you can select how to sort your files (gear wheel button / secondary click context menu)

Maybe you are looking for