Stop the execution of MIGO BADI on click of a button

Dear Experts,
My client have a strange requirement in MIGO  BADI i.e. MB_DOCUMENT_BADI.
He wants me to show a popup with some information and which has 3 buttons on it in the above BADI implementation.
These 3 buttons are YES, NO & VIEW PDF.
When the user clicks on YES, the processing of the exit will continue with some user defined logic and the document will get posted.
And when the user clicks on NO,  the processing of the exit will continue with some other user defined logic and the document will get posted.
But the problem comes when the user clicks on VIEW PDF button, he wants to open a new window having a pdf file in it but still have the program control on the popup only.
To be more clear when he clicks on the VIEW PDF button, i should open a new session and show the PDF file but my popup should still be active and my user exit processing should be on hold until he selects YES or NO buttons and my document should not be posted.
I have written the code to open the PDF file, but when the user clicks on the VIEW PDF button the program control does not stops and the document gets posted into the system.
Can anyone help me out with this?
Thanks,
Praveen Bitling

Dear Praveen,
Kindly execute your logic for yes or no in if condition by checking sy-ucomm.
Regards,
Pushkar

Similar Messages

  • How can I stop the execution on a JSP page and start it again

    Hi
    I am making a program that simulates how to manage transactions when accessing a database by using locks. I have run into a problem and I hope someone has the time to help me.
    When a user does an update the transaction commits and releases its locks when the program executes
    <%stmt.executeUpdate("commit!"); %>
    I need to put a break in to stop the program executing this statement, to illustrate the lock is set correctly.
    I have tried to put in an alert box but this does not prevent the rest of the java code being executed.
    I have tried to use prompt boxes, JavaScript functions, but these functions cannot have any java code in them.
    I have tried using the java.swing JOptionPane boxes but this didn?t work either
    I have tried to get input from the user but I don?t know how to retrieve this data on the same page. (As far as I know you have to use submit and even refresh the page or retrieve it on the next page).
    Does anyone know how I can stop the execution on a JSP page and start it again (on same page)
    Mette

    I already have another client (Tomcat jsp application) running and it throws a SQLException correctly when I don�t put in a commit=true statement and don't close the database connection.
    But the problem is how to get the code above to stop to illustrate I have set this lock.
    I have tried to use the JOptionPane but because my program is running in a web browser I cannot use the JOptionPane dialog box.
    I have tired using an alert box but it executes the commit statement before the alert box is dispayed. So this does not work
    While (i < 2)
    if( i==1)
    %>alert(�The transactions commits when you press Ok�); <% //what it to stop execution here
    else
    stmt.executeUpdate(�commit�);
    I am not using threads so I cannot use the sleep function.
    I am using mysql and have already configured it to detect deadlocks and how long to wait for locks.
    Thanks for your help
    Mette

  • Stopping the execution in between

    Hi,
    I am using a Event structure to Start and Stop the test. In the Start event i will be having a stacked sequence which consists of many sequences. In the Stop Event I will be stopping the execution. If I press Start button the sequence under this event will start running. I want to Stop the execution or skip the next set of sequences in between the sequence. During this I lose the control over the GUI and I cannot do anything until the sequence under the Start event is completed. I can stop the execution by pressing the abort button but i want do it programmatically.
    Regards,
    Rajashekar

    Here you go...your code with state machine implementation. If you implement it this way, you can definitely take care of the case that you have mentioned.
    Example in LV 8.6.
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies
    Attachments:
    Sample_State_Machine.zip ‏14 KB

  • HT4064 how to do you stop the issue when you have to click several times on your ipad to get into anything?

    how to do you stop the issue when you have to click several times on your ipad to get into anything?

    I think you have enabled VoiceOver; turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • Stop the execution of main for 2 more seconds

    hi,
    I would like to stop the execution of the main program for few seconds and resume again.
    i tried
    try
                        this.wait(90000000);
                   catch(Exception e)
    but did not work
    could some give any other suggestions
    thanks
    jag

    Also, it's better to catch the specific Exception that the Thread.sleep method throws.
    (InterruptedException)
    And it's usually good to output any exception messages, so you can see what's going on.
    Instead of empty catch brackets, it's better to write e.printStackTrace();
    (where e is the name of your caught Exception...)
    cheers!
    lutha

  • Stop the execution for Some seconds

    I want to stop the execution for some second , Basically
    i want some funtion which will wait for specified period .
    it should work like Inkey() in foxpro .
    I have tried timer , pause but that does not solve the problem
    Thank you
    Regards
    Farukh

    find the library d2kwutil.pll (probably in c:\orawin95\tools\devdem60\demo\forms) and copy it and d2kwut32.dll to your application directory. Attach the pll to your form; now you can "interface" with windows. So for pausing you application use this in you form:
    win_api_utility.sleep(1000);
    the parameter takes milliseconds. so in the example it's 1000 milliseconds or 1 second.
    good luck!
    Tim

  • How to print the content of a textarea by clicking on a button?

    Hello, i'm currently developping a HTML Editor in java but i've got a problem with printing job... Does anyone know a simple code to print the content of a textarea by clicking on a button?
    for instance:
    JTextarea textarea = new JTextArea();
    JButton print = new JButton ();
    file_menu.add(print) ;
    print.addActionListener(
    new ActionListener()
    public void actionPerformed(ActionEvent event)
    ////----> what could i put here to print the content of my textarea named 'textarea' ?
    I've searched on the web but i didn't find it...
    Thanks very much for your help...
    S�bastien

    I've never tried it, but here's an article that might help:
    http://www.apl.jhu.edu/~hall/java/Swing-Tutorial/Swing-Tutorial-Printing.html

  • HT1386 I have the latest iTunes but when i click on Sync button or Back up button its not working , why ?

    I have the latest iTunes but when i click on Sync button or Back up  why ?

    It should have noted that the backup was complete on the backup page. Try rebooting your computer and try it again.

  • How to stop the execution of a program

    greets folks
    i want to know if its possible to stop or let in stand by the execution (run) of a program while HttpService responds the request??

    No. All remote requests in Flex are asynchronous.It's part of how Flash Player works and you can't change that. You need to react to the event when the call completes. What are you trying to achieve?

  • Trigger change badi when click a custom button

    hello guys i want to trigger the change badi when a user clicks on a button.  Any help would be create?
    I am using the set change by client setting it to true and then firing the refresh but it is not working?  Any clues?  Thank you.

    As I told you in that linked thread, I'd suggest trying to use SET_CHANGED_BY_CLIENT method on the context of your webdynpro. This is sufficient to make the system aware of a change and trigger the CHANGE badi.
    As far as I've observed doing my tests, the CHANGE badi is then triggered after an event that will follow the SET_CHANGED_BY_CLIENT execution.
    So I'd suggest two test:
    - pre-exit of the method you trigger when the user press your custom buttom: set_changed_by_client and then execute your code. See if the badi is then triggered;
    - if not: you could "force" a subsequent action after the button press, for example, a simple REFRESH of the view. Then I'm sure that, after the set_changed_by_client method, the badi will surely be triggered.
    Please be aware that I'm absolutely NOT a guru on these arguments, so I'm trying to give you some workarounds I implemented on an SRM 7 system. Probably some guru will have better and cleaner solution for your task, but as far as I've seen, these ones should meet your needs.

  • How to externally trigger the execution of TestStand with a start and abort button through a digital interface?

    Hello,
    I'm Currently evaluating TestStand as an alternative for an in-house developed Test Sequencer.
    To start our own Test Sequencer we use a small box, connected to a DIO board. The box has a start button and an abort button. The box also has a pass, a fail and a running led.
    The interface with this box is made via some digital lines of a PCI-DIO-96.
    In our own Test Sequencer we have groups named Init, Run, Abort, Exit.
    The Init group is executed at startup (only once). It is used to initialize all the HW and SW. -> I guess this is the Pre UUT Loop callback in TestStand.
    The Exit group is only executed once at the end of the day when the application is terminated. It is used to free all the used hardware and cleanup all the resources. This probably is the Post UUT Loop Callback in TS.
    When a product needs to be tested, the operator presses the "start" button which triggers our own Test Sequencer and the run and abort group are being executed (first the run group, afterwards the abort group).
    When the product is being tested the "running led" of the little box lights up to indicate to the operator that the application is running. (only when the run and abort group are running)
    The Run group has all the functional tests in it. (MainSequence)
    The abort group is used to put everything back in it's original state after the test on this single product is done. (Post UUT)
    When executing the tests and something goes wrong (operator gets stuck in a clamper, ...) the operator can still press the abort button and then the execution immediately jumps from the currently executing step in the run group to the first step of the abort group. So, when something goes wrong, immediately the abort group is called.
    At the end of the run and abort group, if no errors occured, the "pass led" lights up. If one or more steps went wrong the "fail" led lights up.
    This setup can also be used to test multiple product in parallel. At that time all the different parallel testers have such a small box which contains a "start" and "abort" button and a pass, fail and running led. (it is possible that they are all connected to the same PCI-DIO-96 board. )
    My question:
    Is it possible to do something similar like this in Teststand? If yes, is there an example available that shows me how to do this in TestStand? (externally trigger the execution of TestStand)
    Typically, in the Init group (Pre UUT Loop) the digital interface box gets initialised.
    In the Close group (Post UUT Loop) the digital interface box is taken out of scope.
    Note: The PCI-DIO-96 board to which the digital interface box is connected will also be used in the rest of the developed application (MainSequence, ...)
    What's really important for me is that I can create a process model that all the application developers in our organisation can use. I really don't want any of the application developers (limited software experience) to mess around in all the features of TestStand.
    For them it's important that they just add the function DigitalInterfaceBoxInit () in the Pre UUT Loop Callback and the DigitalInterfaceBoxClose () in the Post UUT Loop Callback, and then everything works!
    It is important that the appliation developers do not have to create any global variables, other functions, synchronisations, parallel sequences, ... in TestStand. All this needs to be done with a simple call to the DigitalInterfaceBoxInit function.
    Thanks in advance for all the help!
    Best Regards,
    Dennis Vanotterdijk
    [email protected]

    Dennis-
    Your application sounds very well suited to TestStand's abilities. I am also quite impressed with your knowledge of how TestStand's architecture is arranged when you are still just considering whether or not to use it.
    I think that TestStand would work really well for you in this application. Like you mentioned it will provide you with a form of standardization for your application developers to work from. It also provides the flexibility for you to add your custom routines in many different places. TestStand also makes parallel and batch testing much easier in TS 2.0 so that you could develop one test for your product and execute different instances of it in parallel to test multiple products at once.
    As for your specific question about how to c
    ontrol TestStand using a DIO board. I think this is very feasible and should not be too difficult. Since TestStand provides you the ability to create a custom operator interface your operator interface could monitor the status of your DIO board and launch/abort executions based on the read values. Usually the executions are launched/aborted when a button on the GUI is pressed however, I do not see any thing different about basing the action on a DI signal vs a mouse click. I am sure your application is more involved than this high level description but from the sounds of it I think it is very possible to do with TestStand.
    Based on my experience of building test systems with TestStand and your description of the application, I would feel very confident in using TestStand to achieve all the goals you mentioned. If you have further detailed questions on how one of your features might be implemented, feel free to contact one of our Application Engineers or email us at www.ni.com/ask
    and we would be glad to help you.
    Best regards,
    Richard McDonell
    National Instruments

  • How do i close the welcome to iMovie screen? Clicking on red button in upper left does nothing. SOS!  Thanks!

    How do I close the "Welcome to iMovie" screen?  Clicking on the red button in the upper left does nothing. SOS!  Thanks!

    "Continue" was hidden at the bottom of the welcome screen because my display was changed.  Some days I'm smarter than others.  Or.... :-) 

  • Capturing the values of screen elements on click of execute button

    Hello folks,
    Is there a way to capture the values entered in the screen on click of the execute button?
    What I want to do is, I have a selection screen where-in a user can fill the input fields (parameters and select-options). Now when the user clicks on the execute button, the values of all the screen elements (no matter if they are filled or empty) should be stored in variable, so that I can use these values again when I am calling this program from another program.
    I want to do something similar to saving a variant, but this save should happen on click of Execute button and user need not require to explicitly save these values as variant.
    Hope I am clear enough to put my query in front of you all.
    It would be a great thing if you could help me.
    Need your help.
    Thanks in advance.

    Hi,
    You need something like this
    REPORT A.
    TABLES: sflight.
    PARAMETERS: pa_scarr   TYPE sflight-carrid.
    SELECT-OPTIONS so_conn FOR  sflight-connid.
    DATA: BEGIN OF it_selscr_values OCCURS 0.
            INCLUDE STRUCTURE rsparams.
    DATA END OF it_selscr_values.
    START-OF-SELECTION.
      CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
        EXPORTING
          curr_report     = sy-repid
        TABLES
          selection_table = it_selscr_values.  "here you have all parameters' values from selection screen
    "later in some other program you can use this table to call report A filling its selection screen with these default values like
    SUBMIT a WITH SELECTION-TABLE it_selscr_values.
    Regards
    Marcin

  • How Can we stop the execution of java program which contain infinite loop

    Dear All,
    I create one .bat file which which execute the simple java program
    I write one java program which execute above .bat file using instance of Runtime Class of java
    It's work fine if java program which is executed by .bat file is simple(Which has normal termination)
    But if that program contain inifinte loop then that file will goes on executing untill I close it manually
    So i want a solution in java which close that bat file (command window ) which is in running condtion
    If there any solution please replay me
    I try to close that .bat file using destroy() ,stop() method of Process and Runtime , Thread Class
    but it did not give me correct output
    .bat file still running !!!!!!!!!
    Thanks in advance

    Why not use javaw.exe to make the app run so you don't need the dos window (which is presumably what you are actually talking about when you say bat file).

  • Here is your answer to download fb. Go to App Store then download fb app. Stop the download within 2 seconds then click on the home screen and you will see it download. Let me know

    Go to App Store download fb. In App Store stop
    Download within 2 seconds. Go to home screen
    And you will see downloading. About 20 min it will
    Take. Let me know.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... (But can take Longer..)
    Release the Buttons..

Maybe you are looking for