Store Location is empty in SRM into PO process.

Hi Masters.
I download the Location form ECC to SRM always is Ok.
in PO process the local storage no show any Storage Location
into Tcode PPOMA_BBP into extended attribute I was put some local Storages the backend Storage .
thanks for your support.

Hello Oscar,
What are your SRM release and your technical scenario ?
You wrote "in PO process the local storage no show any Storage Location". But, did you add a storage location in previous purchasing document (which is Shopping Cart) or do you want to add storage location after PO is created ?
Regards.
Laurent.

Similar Messages

Report for showing pending (ageing) quantity according to store location w

dear ABAP Gurus,
I have made a roport for showing pending (ageiing) quantity acc to location wise.
and i m sending here the code i made for same.Tell me if sme amendments required.
Report for showing pending (ageing) quantity according to store location wise:
1.     Fields on selection screen (input screen) : Plant code From to , Material code From to , Current date, Numbers of days(for display the ageing(pending) balance for a given period,Storage locations from to.
2.     Field in the output List : Material code , Material descriptions, Balance quantiy,Balance value ,Consumptions date.
the code is:
REPORT ZAGEIN_SUDHA.
TABLES: mara,mseg,makt.
TYPES: BEGIN OF t_mara,
matnr LIKE mara-matnr,           "material number
maktx LIKE makt-maktx,           "material description
ersda LIKE mara-ersda,           "material creation date
lgort like mseg-lgort,           "storage location
bwart like mseg-bwart,           "goods received or issued
menge like mseg-menge,           "value at movement type
werks like mseg-werks,           "plant
END OF t_mara.
DATA: i_mara TYPE STANDARD TABLE OF t_mara with header line,
      itab type standard table of mara with header line,
*wa_mara TYPE t_mara,
v_date TYPE i,                      "age in days
GI type mseg-menge,                 "goods issued
GR type mseg-menge,                 "goods received
bal type mseg-menge,                "balance
total type i,
grace type i,
g_quan type mseg-menge.
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECT-OPTIONS: p_matnr FOR mara-matnr.
select-options: p_werks for mseg-werks.
select-options: p_lgort for mseg-lgort.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
REFRESH i_mara.
SELECT mr~matnr                        "mara-matnr
mk~maktx                               "makt-maktx
mr~ersda                               "mara-ersda
mg~lgort                               "mseg-lgort
mg~bwart                               "mseg-bwart
mg~menge                               "mseg-menge
INTO corresponding fields of table i_mara
FROM mara AS mr INNER JOIN
makt AS mk
ON mrmatnr = mkmatnr INNER JOIN mseg AS mg on mkmatnr = mgmatnr
WHERE mrmatnr IN p_matnr and mgwerks IN p_werks and mg~lgort IN
p_lgort.
total = 0.
IF sy-subrc = 0.
*CLEAR wa_mara.
LOOP AT i_mara.
if i_mara-bwart = '101' .
GR = total + i_mara-menge.
total = GR.
elseif
i_mara-bwart = '102' or i_mara-bwart = '122'.
GR = GR - i_mara-menge.
endif.
if i_mara-bwart = '261'.
GI = total + i_mara-menge.
elseif i_mara-bwart = '262'.
GR = GR + i_mara-menge.
endif.
bal = GR - GI.
if bal GE GR.
grace = 30.
else.
grace = 10.
endif.
g_quan = bal - GR.
v_date = sy-datum - i_mara-ersda.
endloop.
WRITE: / i_mara-matnr ,i_mara-maktx,' is ',v_date,' ,days old and
stored at' ,i_mara-lgort ,   ' with balance =', bal ,'the grace time is
', grace, 'and' ,'grace quantity is ' ,g_quan.
*ENDLOOP.

Hi,
That sounds like a nice report. What about it?!
Gareth.

How do I stop ipad from changing my settings such as store location while I am temporarily in another country?

QUESTION ONE: For example - the calendars were automatically changed to Bahasa. I changed them back - but they returned to Bahasa. The second time only some of the screens changed to Bahasa.
More seriously I can't download apps anymore because it tells me my store location is Indonesia and I registered in Australia store. I didn't change my store location - iPad did. How do I change it back?
QUESTION TWO
Another question - sometimes the screen goes large by itself and and won't reduce or zoom out again. The only way to fix it is to switch the ipad off and power on again. This does not work all the time. Any ideas? Fingers coming together do not work.
QUESTION THREE
Another question - I purchased a sd card and usb jack for photo import - as essential part of my use. The sd jack does not appear to work as it does not show any photos on the ipad - nor any 'way' to import or to view the files on sd. There is no little light to say its working or not - but I read the manual and it says that you insert the sd cardreader jack, turn on ipad and then insert the sd card without forcing - only one way fits. After doing this I select the photo icon as an obvious choice on ipad but there are no photos or dialogue.
QUESTION FOUR
Another question - In the same purchase I bought a usb jack for camera and photo connection. This seems to work as a dialogue message pops up when I insert a camera connected usb into it. But the dialogue says - 'the device uses too much electricity to import photos". Is this because the device is an android phone and not an iphone? Or is there another magic trick I need to learn?

The site file is a database that keeps track of all your assets (and much more), including the scriptLib file. As soon as the page is saved (when you use the site file and it's open) the link will be change to the correct path that will work on the server.
If you're not using the site file you might as well use a text editor, since most of GL functionality is gone.

I am living in moscow, but i have a mastercard in vietnam. I changed my location in itunes from Russia into Vietnam. But when I change my billing info, and write my card's informations. It said I have problems with the address. I typed my address in VN.

I am living in moscow, but i have a mastercard in vietnam. I changed my location in itunes from Russia into Vietnam. But when I change my billing info, and write my card's informations. It said I have problems with the address. I typed my address in VN. What should I do now ????

To answer the second question first, the owners of the music (and that is not Apple) decide where their music can be sold. If they decide (for whatever reason) not to sell their music in a particular country, they will not let a music retailer (that is Apple this time) sell it in that country. So the "system" is beyond Apple's control.
As for your first post; (if I understand you correctly), the iTunes Store knows that you are in Russia, so using a credit card registered in Vietnam is simply going to look like you're trying to get round the system.
The credit card is tied to an address, and therefore to a country. Simply using a different country's address is not going to work.
By the way, this is a world-wide situation. It's not a matter of having to use a Russian card, whatever card you use has to be registered at an address in Russia.
Use the support link in the iTunes Store to contact Apple and see if you can straighten out whether you can buy songs, where ever you are and with whichever card you have.

Prod. stor. location usage Material master

Dear PP expert
Who can help to explain what meaning for this feild Prod. stor. location in MM01 transcation? what is its usage?>
Thanks

Hi Benny,
The Prod. sloc maintained in mtl master serves dual purpose, first when a production order is created for that material, it acts as the receiving location i.e. when you post a GR for the prodn order via MB31 the stock gets posted into this sloc. The other purpose is when this material is a component in a production order, then stock gets issued from this sloc.
This field can be maintained at material master level or at BOM level. The one maintained at BOM level has a higher precedence over the one in material master. If you might ask why 2 places to maintain the same data, there might be instances where the component is stored at different slocs depending on the BOM, then it makes sense to maintain at BOM level, but if the component is always maintained at a single sloc, then maintain in mtl master level.
Hope the above answers your query.
Regards,
Vivek

Stock transfer between stor locations - copy in reference data

Dear all,
We would like to implement a process in SAP MM that is as follows.
However so far we have not been able to find a suitable/good solution for the below step number 5 below
Proces in general: A number of Materials are to be received in storage location 1 but to be stocked in storage location 2 of the same plant.
We configured it like this so far:
1                    MM01 - Material master created in both storage locations. In the field MARC-LGFSB ( external procurement stor.location) we have filled in storage location 1
2                    MD01 - mrp runs are executed ; results in Purchasing Requisitions created for storage location 1
3                    Purchase requisitions are converted to Purchase orders
4                    MIGO u2013 goods receipt for the purchasing order , hence receipt into stock of storage location 1
5                    MIGO_TR u2013 stock transfer posting stor.loc 1 to stor.loc. 2 . At this point we would like to be able to reference/copy the data of the step 1 into this transaction in order that the data does not have to be re-entered manually. We canu2019t find a way how to do this. Should we use other functionality to enable this? In the end what we are after is to avoid typing in data twice.
Your help would be much appreciated.
Cheers,
Arjan
Edited by: A. de Vries on Oct 27, 2010 5:41 PM

Why don't you receive the goods directly in the storage location where it is "stocked"?
If you still adhere to your idea you maybe could trigger an output (via message determination) when posting the GR in MIGO. The output would create an IDOC which posts the goods movement (check IDOC "MBGMCR02"??? --> this IDOC uses function modul "MB_CREATE_GOODS_MOVEMENT" )
This needs some development...

Itunes store app is empty after instaling IOS 7

after instaling IOS 7 the itunes store app is empty. Allready tried reseting and worked once but after reinitiating the app all blak again...

Just had the same problem hasn't worked since I updated. Tried resetting, and tried changing the saved cookies from always to just third party and STILL didn't work. However checked my pop up blocker which was on and turned it off just to see if it would work and it did... Not sure if this will work for anyone else but it's another thing to try! Go into settings-safari and it should be there. Hope this helps!

How can I change the app store location?Want to buy in us and it keeps saying I'm in the australia app store

How can I change a app store location? I'm in US trying to dowload an app and it says my account is not valid in the Australian store. I have nothing to do with Australia.

Go to the iTunes Store. Scroll down to the very bottom and click the flag that is on the bottom right. Then you can select what store you want.

Report for showing pending (ageing) quantity according to store location wi

Report for showing pending (ageing) quantity according to store location wise:
Fields on selection screen (input screen) : Plant code From to , Material code From to , Current date, Numbers of days(for display the ageing(pending) balance for a given period,Storage locations from to.
Field in the output List : Material code , Material descriptions, Balance quantiy,Balance value ,Consumptions date.

Hi,
That sounds like a nice report. What about it?!
Gareth.

I bought a brand new mac and follow through setting up process with my apple id but when I open App Store I don't see lion into the purchases list. why?

I bought a brand new mac and follow through setting up process with my apple id but when I open App Store I don't see lion into the purchases list. why?

Updates come through Software Update not the App Store. If you have to reinstall Lion that is done via Internet Recovery.
OS X Lion- About Lion Recovery
OS X Lion- Run Software Update to use Lion Internet Recovery
Lion maintenance and recovery operate via the Recovery HD. It's possible to create a separate recovery disk on a flash drive using OS X Lion: About Lion Recovery Disk Assistant.
To boot into the Recovery HD:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

How to store the data of a file into an ArrayList?

Hi! everyone.
I want to know
if I have a File, and the data in the file are type int, type String...
And I have a ArrayList which is of type Question
How do I store the data of that file into the ArrayList
I tried to use the while loop(use the hasNextLine() to read the data line by line)
But I cannot add data which are not of type Question to the ArrayList.
Can you tell me what I should do, please?
I also wonder that
The data of the file are of many types, but when I try to read it with the nextLine(), the data all turn out to be of type String. Why?
Thank you.
Edited by: Terry001 on Apr 30, 2008 1:13 PM

No, a line in the file is just part of a question
The format of the file is like this:
*<question type code>                    :     String*
*<question point value>                    :     int*
*<question category>                         :     String*
*<question difficulty level>               :     int*
*<question text>                              :     String*
*<question correct answer>               :     String*
*<optional question-specific data>     :     String*
*<question terminator>                    :     String*
And here is an example
TF //TrueFalseQuestion
5 //points value
None //category
3 //difficulty level
The capital of the United States is Washington, D.C. //question text
True // answer
*** //quetion terminator
I created an ArrayList in the Test class:
private ArrayList<Question> questions; // Create inside constructor
    public Test (String name, String instr)
        testName = name;
        scoreEarned = 0;
        scorePossible = 0;
        instructions = instr;
        questions = new ArrayList<Question>(); //[MAX_NUMBER_OF_QUESTIONS];
    }And I tried to use the following method to store the data of the file to the ArrayList
// This method loads a set of questions from a plain text file
    public void loadQuestionsFromFile(String fileName) throws FileNotFoundException
        try
            File fileReader = new File("input.txt");
            Scanner sc = new Scanner(fileReader);
            while (sc.hasNextLine())
                // I don't know how to pass the data I got from the nextLine() method to the ArrayList because they are of different type
        catch (FileNotFoundException a)
            System.out.println(a);
    }    As all you said, I should create an Question object in the while loop
Question temp = new Question ();But I have no idea how to pass the int and String to the Question object.
Thank you

Issue store location is not picking up automatically

Dear Sir,
I am in the process of backflushing.
I have maintained Issue store location in production version of Header material.
when components are backflushed with respect to production version It should have to pick up the store location automatically from production version.
But it is found that each time backflushing ,manually we have to enter the store location on screen Goods movement in MFBF.

Hi,
If you are using MRP Group - then pls check in OPPR - Det Prod Stor Locn strategy.
Set this to 2 and try MFBF again.
Or else you can define for the component in BOM item details.By priority , system will look for this first and then only the strategy ......
Issue Storage Location Selection
Determines how the system finds the issue storage location (the production storage location from which the components are taken to produce an assembly) for the component if no issue storage location is defined for the component in the BOM of the assembly. You have the following options:
Strategy 2The system uses the default issue storage location specified in the material master record of the assembly in the production version. If no default issue storage location is specified in the production version, then the system uses the receiving storage location for the assembly as issue storage location for components.

0IC_C03 - some key figures have unassigned Store location

Hi,
I try to implement Inventory managment scenario in BW.I follow the How to document How to handle inventory management scenarios in Bw.
Now I uploaded data to BW, the sume of key figures as general look good but I have problem with key figures,which work with value in currency, this key figures(e.g 0ISSVS_VAL, 0VALSTCKVAL) are not assigned to Store location 0STOR_LOC, values of these key figures have this characteristics Unassigned (#), unlike key figures with amount value e.g. kg etc are assigned to store location. So there is problem that is no possibility to compare material stock in currency and amount.
Do you have any experience how to solve this issue?
I work with BI 7.0 version and use standard object from BI content without modification.
Thanks
Petr
Edited by: Petr Jedlicka on Aug 12, 2011 2:30 PM
Edited by: Petr Jedlicka on Aug 12, 2011 2:31 PM

Hi,
Inventory values are captured at site/plant levels not the storage locations. These values are caputured using 2lis_03_um datasource. When you create a material, materials are created as per site. 0MAT_PLANT.
when there are movements of sales in the inventory, sales take place thru site not storage location. So sloc will not get updated in the transaction. where as when you move stock from one site to other site, there may be on storage location for all site or one sloc for one site. So for qtys you will have sloc.
Thanks
srikanth

Zip Code Locator / Store Locator

Guys,
I want to write a simple store-locator functionality in my website (Using a Mysql db with JSP-java etc.,)
I am not sure of the tools I need and how to approach the problem (once I get a Map of all the zip codes)... Please throw in some ideas that can help me on this...
Thanks a ton!

The earth is ~ 40,000 km equatorial circumference
Mapped as rectangular projection ignoring poles is 40,000 km x 16,000 km = 640,000,000 1km x 1km cells
so 1 byte/km2 = 640 MB
or 1 word/(250m x 250m) = 4*4*4*640MB = 40GB
So a reasonable brute force method for the planet (and a few big memory servers or a not very big fast disk) would work in most cases.
Obviously, if you're only interested in one part of the globe you scale down.
The USA is something like 10,000 km square so a �60 520GB disk would give you a 1/sqrt(500E9/4/(10E6m^2)) = 28m resolution lookup at < 10ms time per request.
A second lookup of the id returned from the big bitmap using the nearest neighbour approach for a few points would take you further, if required.
How much is your time worth to develop an efficient solution, if throwing �60 of hardware at it would be good enough?
Short of buying an awful lot of memory, any solution will hit the disk at least once (though you may be able to optimise away seeking, it's a query and won't be streaming whatever you do), so the overall time isn't likely to get much better without a lot of effort.
You can always trade off between the bitmap/localised query for space and speed.
Pete

Store locator error

On the store locator map, the location of the Ashton Under Lyne store:31 BOW STREET
ASHTON UNDER LYNE
GREATER MANCHESTER
OL6 6BU... is incorrectly placed on Benbow Avenue, Longsight, Manchester, M12 4PU - about six miles away.

Helen03 wrote:
On the store locator map, the location of the Ashton Under Lyne store:31 BOW STREET
ASHTON UNDER LYNE
GREATER MANCHESTER
OL6 6BU... is incorrectly placed on Benbow Avenue, Longsight, Manchester, M12 4PU - about six miles away. I'm sure @Toby will feed this back. How long it takes to update is anyone's guess. It will probably be a 3 store by then....

Store Location is empty in SRM into PO process.

Similar Messages

Maybe you are looking for