Store mailboxes on a different server

Dear support,
i need to save my mailboxes on a different server. but i didn't success till now, knowing that my sun one version is:
iPlanet Messaging Server 5.2 HotFix 1.21 (built Sep 8 2003)
libimta.dll 5.2 HotFix 1.21 (built 19:16:00, Sep 8 2003)
Microsoft Windows 2000 Professional version 5.0 Service Pack 4 (Build 2195)
Steps done so far:
1- Create the path
2- Point the default primary partition to the created path on the different server
3-check that store.defaultpartition reflect the correct path
4- By default there is no mailmessagestore attribute created under each user, but i test with adding this attribute and without
Problems faced:
1- When i log with some users i get "quota root does not exist"
2- Other users i'm able to log with but when trying to send i get "Message sent but save copy failed: System I/O error, administrator, check server log for details
3- The message in the queue but never delivered
Appreciate any hints or solutions to store my mailboxes on a different server on the same network
Thank you
T.

I don't quite understand what you're trying to do, unless . .
You want to have some of your users on a different box? That box is running iMS 5.2, right?
The easiest way to migrate existing users from box A to box B is to use the MoveUser utility. This will move the contents of the mailbox, and will also make the required ldap modifications.
The user's ldap attribute, "mailhost" is what sets the machine where that user's mailbox exists. Without changing that, you will not be able to move the store. . .

Similar Messages

  • Mailbox is on a different server

    Hi,
    I had successfully configured JES 2005 Q1 Messaging+ Calendaring + Delegated Administration on top of Directory and Access Manager on Sol-10 x-86. It was working perfectly fine until, I hyad a necessity to configure the same LDAP as a Native Solaris authentication.
    Subsequent to my Native Solaris authentication, Calendar, Delegated Administrator is working perfectly fine, whereas in Messaging, when I login as a user, it returns with an error Message "Mailbox is on a different server".
    My mailHost and preferredMailHost attributes are perfect. Any other place to look out for this.
    I am also sending the /opt/SUNWmsgsr/sbin/getconf output. Thanks
    OUTPUT OF /opt/SUNWmsgsr/sbin/getconf
    alarm.createtimestamp = 20050519053744Z
    alarm.creatorsname = "cn=directory manager"
    alarm.diskavail.createtimestamp = 20050519053744Z
    alarm.diskavail.creatorsname = "cn=directory manager"
    alarm.diskavail.modifiersname = "cn=directory manager"
    alarm.diskavail.modifytimestamp = 20050519055448Z
    alarm.diskavail.msgalarmdescription = "percentage mail partition diskspace available"
    alarm.diskavail.msgalarmstatinterval = 3600
    alarm.diskavail.msgalarmthreshold = 10
    alarm.diskavail.msgalarmthresholddirection = -1
    alarm.diskavail.msgalarmwarninginterval = 24
    alarm.diskavail.objectclass = nsmsgCfgAlarm
    ,top
    alarm.modifiersname = "cn=directory manager"
    alarm.modifytimestamp = 20050519055448Z
    alarm.msgalarmnoticeport = 25
    alarm.msgalarmnoticercpt = postmaster
    alarm.msgalarmnoticesender = postmaster
    alarm.objectclass = nsmsgCfgAlarmContainer
    ,top
    alarm.serverresponse.createtimestamp = 20050519053744Z
    alarm.serverresponse.creatorsname = "cn=directory manager"
    "conf.test" 422 lines, 16839 characters
    alarm.diskavail.msgalarmstatinterval = 3600
    alarm.diskavail.msgalarmthreshold = 10
    alarm.diskavail.msgalarmthresholddirection = -1
    alarm.diskavail.msgalarmwarninginterval = 24
    alarm.diskavail.objectclass = nsmsgCfgAlarm
    ,top
    alarm.modifiersname = "cn=directory manager"
    alarm.modifytimestamp = 20050519055448Z
    alarm.msgalarmnoticeport = 25
    alarm.msgalarmnoticercpt = postmaster
    alarm.msgalarmnoticesender = postmaster
    alarm.objectclass = nsmsgCfgAlarmContainer
    ,top
    alarm.serverresponse.createtimestamp = 20050519053744Z
    alarm.serverresponse.creatorsname = "cn=directory manager"
    alarm.serverresponse.modifiersname = "cn=directory manager"
    alarm.serverresponse.modifytimestamp = 20050519055448Z
    alarm.serverresponse.msgalarmdescription = "server response time in seconds"
    alarm.serverresponse.msgalarmstatinterval = 600
    alarm.serverresponse.msgalarmthreshold = 10
    alarm.serverresponse.msgalarmthresholddirection = 1
    alarm.serverresponse.msgalarmwarninginterval = 24
    alarm.serverresponse.objectclass = nsmsgCfgAlarm
    ,top
    createtimestamp = 20050519053744Z
    creatorsname = "cn=directory manager"
    encryption.createtimestamp = 20050519053744Z
    encryption.creatorsname = "cn=directory manager"
    encryption.fortezza.createtimestamp = 20050519053744Z
    encryption.fortezza.creatorsname = "cn=directory manager"
    encryption.fortezza.modifiersname = "cn=directory manager"
    encryption.fortezza.modifytimestamp = 20050519055448Z
    encryption.fortezza.nssslactivation = off
    encryption.fortezza.objectclass = top
    ,nsEncryptionModule
    encryption.modifiersname = "cn=directory manager"
    encryption.modifytimestamp = 20050519055448Z
    encryption.nsssl2 = off
    encryption.nsssl3 = on
    encryption.nsssl3ciphers = rsa_rc4_40_md5
    ,rsa_rc2_40_md5
    ,rsa_des_sha
    ,rsa_rc4_128_md5
    ,rsa_3des_sha
    encryption.nsssl3sessiontimeout = 0
    encryption.nssslclientauth = 0
    encryption.nssslsessiontimeout = 0
    encryption.objectclass = top
    ,nsEncryptionConfig
    encryption.rsa.createtimestamp = 20050519053744Z
    encryption.rsa.creatorsname = "cn=directory manager"
    encryption.rsa.modifiersname = "cn=directory manager"
    encryption.rsa.modifytimestamp = 20050519055448Z
    encryption.rsa.nssslactivation = on
    encryption.rsa.nssslpersonalityssl = Server-Cert
    encryption.rsa.nsssltoken = internal
    encryption.rsa.objectclass = top
    ,nsEncryptionModule
    gen.accounturl = http://%[email protected]:390/bin/user/admin/bin/enduser
    gen.configversion = 4.0
    gen.createtimestamp = 20050519053744Z
    gen.creatorsname = "cn=directory manager"
    gen.folderurl = http://%[email protected]:390/bin/user/admin/bin/mailacl.cgi?folder=%M
    gen.installedlanguages = "en,de,fr,es,ja,ko,zh-CN,zh-TW"
    gen.modifiersname = "cn=directory manager"
    gen.modifytimestamp = 20050519055448Z
    gen.objectclass = nsmsgCfgGen
    ,top
    gen.sitelanguage = en
    local.defdomain = sunray.bdc3.co.in
    local.enduseradmincred = Xg2qcd0sEE
    local.enduseradmindn = "uid=msg-admin-bdc3srssu3.sunray.bdc3.co.in-20050519055344Z, ou=People, o=sunray.bdc3.co.in,dc=sunray,dc=bdc3,dc=co,dc=in"
    local.ens.enable = 1
    local.hostname = bdc3srssu3.sunray.bdc3.co.in
    local.imta.enable = 1
    local.imta.imta_tailor = /opt/SUNWmsgsr/config/imta_tailor
    local.imta.ssrenabled = yes
    local.installeddir = /opt/SUNWmsgsr
    local.instancedir = /opt/SUNWmsgsr
    local.lastconfigfetch = 1118409516
    local.ldapbasedn = o=NetscapeRoot
    local.ldapcachefile = /opt/SUNWmsgsr/config/local.conf
    local.ldaphost = bdc3srssu3.sunray.bdc3.co.in
    local.ldapport = 389
    local.ldapsiecred = 6kca=wnDnr
    local.ldapsiedn = "cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=bdc3srssu3.sunray.bdc3.co.in, ou=sunray.bdc3.co.in, o=NetscapeRoot"
    local.ldapusessl = False
    local.mmp.enable = 0
    local.sched.enable = 1
    local.schedule.expire = "0 23 * * * /opt/SUNWmsgsr/sbin/imexpire"
    local.schedule.msprobe = "5,15,25,35,45,55 * * * * /opt/SUNWmsgsr/lib/msprobe"
    local.schedule.purge = "0 0,4,8,12,16,20 * * * /opt/SUNWmsgsr/lib/purge -num=5"
    local.schedule.return_job = "30 0 * * * /opt/SUNWmsgsr/lib/return_job"
    local.servergid = mail
    local.servername = bdc3srssu3.sunray.bdc3.co.in
    local.serverroot = /opt/SUNWmsgsr
    local.servertype = msg
    local.serveruid = mailsrv
    local.service.pab.attributelist = pabattrs
    local.service.pab.enabled = 1
    local.service.pab.ldapbasedn = o=pab
    local.service.pab.ldapbinddn = "uid=msg-admin-bdc3srssu3.sunray.bdc3.co.in-20050519055344Z, ou=People, o=sunray.bdc3.co.in,dc=sunray,dc=bdc3,dc=co,dc=in"
    local.service.pab.ldaphost = bdc3srssu3.sunray.bdc3.co.in
    local.service.pab.ldappasswd = Xg2qcd0sEE
    local.service.pab.ldapport = 389
    local.service.pab.maxnumberofentries = 500
    local.store.enable = 1
    local.store.snapshotdirs = 3
    local.store.snapshotinterval = 1440
    local.store.snapshotpath = dbdata/snapshots
    local.supportedlanguages = "[en,de,fr,es,af,ca,da,nl,fi,gl,ga,is,it,no,pt,sv,ja,ko,zh-CN,zh-TW]"
    local.tmpdir = /opt/SUNWmsgsr/data/tmp
    local.ugldapbasedn = "dc=sunray,dc=bdc3,dc=co,dc=in"
    local.ugldapbindcred = Xg2qcd0sEE
    local.ugldapbinddn = "uid=msg-admin-bdc3srssu3.sunray.bdc3.co.in-20050519055344Z, ou=People, o=sunray.bdc3.co.in,dc=sunray,dc=bdc3,dc=co,dc=in"
    local.ugldapdeforgdn = "o=sunray.bdc3.co.in,dc=sunray,dc=bdc3,dc=co,dc=in"
    local.ugldaphost = bdc3srssu3.sunray.bdc3.co.in
    local.ugldapport = 389
    local.ugldapuselocal = yes
    local.watcher.enable = yes
    local.webmail.da.host = bdc3srssu3.sunray.bdc3.co.in
    local.webmail.da.port = 8080
    local.webmail.sso.enable = 0
    local.webmail.sso.singlesignoff = 1
    logfile.admin.buffersize = 0
    logfile.admin.createtimestamp = 20050519053744Z
    logfile.admin.creatorsname = "cn=directory manager"
    logfile.admin.expirytime = 604800
    logfile.admin.flushinterval = 60
    logfile.admin.logdir = /opt/SUNWmsgsr/data/log
    logfile.admin.loglevel = Notice
    logfile.admin.logtype = NscpLog
    logfile.admin.maxlogfiles = 10
    logfile.admin.maxlogfilesize = 2097152
    logfile.admin.maxlogsize = 20971520
    logfile.admin.minfreediskspace = 5242880
    logfile.admin.modifiersname = "cn=directory manager"
    logfile.admin.modifytimestamp = 20050519055448Z
    logfile.admin.objectclass = nsmsgCfgLog
    ,top
    logfile.admin.rollovertime = 86400
    logfile.createtimestamp = 20050519053744Z
    logfile.creatorsname = "cn=directory manager"
    logfile.default.buffersize = 0
    logfile.default.createtimestamp = 20050519053744Z
    logfile.default.creatorsname = "cn=directory manager"
    logfile.default.expirytime = 604800
    logfile.default.flushinterval = 60
    logfile.default.logdir = /opt/SUNWmsgsr/data/log
    logfile.default.loglevel = Notice
    logfile.default.logtype = NscpLog
    logfile.default.maxlogfiles = 10
    logfile.default.maxlogfilesize = 2097152
    logfile.default.maxlogsize = 20971520
    logfile.default.minfreediskspace = 5242880
    logfile.default.modifiersname = "cn=directory manager"
    logfile.default.modifytimestamp = 20050519055448Z
    logfile.default.objectclass = top
    ,nsmsgCfgLog
    logfile.default.rollovertime = 86400
    logfile.http.buffersize = 0
    logfile.http.createtimestamp = 20050519053745Z
    logfile.http.creatorsname = "cn=directory manager"
    logfile.http.expirytime = 604800
    logfile.http.flushinterval = 60
    logfile.http.logdir = /opt/SUNWmsgsr/data/log
    logfile.http.loglevel = Notice
    logfile.http.logtype = NscpLog
    logfile.http.maxlogfiles = 10
    logfile.http.maxlogfilesize = 2097152
    logfile.http.maxlogsize = 20971520
    logfile.http.minfreediskspace = 5242880
    logfile.http.modifiersname = "cn=directory manager"
    logfile.http.modifytimestamp = 20050519055449Z
    logfile.http.objectclass = top
    ,nsmsgCfgLog
    logfile.http.rollovertime = 86400
    logfile.imap.buffersize = 0
    logfile.imap.createtimestamp = 20050519053744Z
    logfile.imap.creatorsname = "cn=directory manager"
    logfile.imap.expirytime = 604800
    logfile.imap.flushinterval = 60
    logfile.imap.logdir = /opt/SUNWmsgsr/data/log
    logfile.imap.loglevel = Notice
    logfile.imap.logtype = NscpLog
    logfile.imap.maxlogfiles = 10
    logfile.imap.maxlogfilesize = 2097152
    logfile.imap.maxlogsize = 20971520
    logfile.imap.minfreediskspace = 5242880
    logfile.imap.modifiersname = "cn=directory manager"
    logfile.imap.modifytimestamp = 20050519055448Z
    logfile.imap.objectclass = top
    ,nsmsgCfgLog
    logfile.imap.rollovertime = 86400
    logfile.imta.buffersize = 0
    logfile.imta.createtimestamp = 20050519053745Z
    logfile.imta.creatorsname = "cn=directory manager"
    logfile.imta.expirytime = 604800
    logfile.imta.flushinterval = 60
    logfile.imta.logdir = /opt/SUNWmsgsr/data/log
    logfile.imta.loglevel = Notice
    logfile.imta.logtype = NscpLog
    logfile.imta.maxlogfiles = 10
    logfile.imta.maxlogfilesize = 2097152
    logfile.imta.maxlogsize = 20971520
    logfile.imta.minfreediskspace = 5242880
    logfile.imta.modifiersname = "cn=directory manager"
    logfile.imta.modifytimestamp = 20050519055449Z
    logfile.imta.objectclass = top
    ,nsmsgCfgLog
    logfile.imta.rollovertime = 86400
    logfile.modifiersname = "cn=directory manager"
    logfile.modifytimestamp = 20050519053744Z
    logfile.objectclass = top
    ,nsmsgCfgContainer
    logfile.pop.buffersize = 0
    logfile.pop.createtimestamp = 20050519053745Z
    logfile.pop.creatorsname = "cn=directory manager"
    logfile.pop.expirytime = 604800
    logfile.pop.flushinterval = 60
    logfile.pop.logdir = /opt/SUNWmsgsr/data/log
    logfile.pop.loglevel = Notice
    logfile.pop.logtype = NscpLog
    logfile.pop.maxlogfiles = 10
    logfile.pop.maxlogfilesize = 2097152
    logfile.pop.maxlogsize = 20971520
    logfile.pop.minfreediskspace = 5242880
    logfile.pop.modifiersname = "cn=directory manager"
    logfile.pop.modifytimestamp = 20050519055449Z
    logfile.pop.objectclass = top
    ,nsmsgCfgLog
    logfile.pop.rollovertime = 86400
    logfiles.admin.alias = |logfile|admin
    logfiles.admin.createtimestamp = 20050519053744Z
    logfiles.admin.creatorsname = "cn=directory manager"
    logfiles.admin.modifiersname = "cn=directory manager"
    logfiles.admin.modifytimestamp = 20050519055448Z
    logfiles.admin.objectclass = nsmsgCfgAlias
    ,top
    logfiles.createtimestamp = 20050519053744Z
    logfiles.creatorsname = "cn=directory manager"
    logfiles.default.alias = |logfile|default
    logfiles.default.createtimestamp = 20050519053744Z
    logfiles.default.creatorsname = "cn=directory manager"
    logfiles.default.modifiersname = "cn=directory manager"
    logfiles.default.modifytimestamp = 20050519055448Z
    logfiles.default.objectclass = nsmsgCfgAlias
    ,top
    logfiles.http.alias = |logfile|http
    logfiles.http.createtimestamp = 20050519053744Z
    logfiles.http.creatorsname = "cn=directory manager"
    logfiles.http.modifiersname = "cn=directory manager"
    logfiles.http.modifytimestamp = 20050519055448Z
    logfiles.http.objectclass = nsmsgCfgAlias
    ,top
    logfiles.imap.alias = |logfile|imap
    logfiles.imap.createtimestamp = 20050519053744Z
    logfiles.imap.creatorsname = "cn=directory manager"
    logfiles.imap.modifiersname = "cn=directory manager"
    logfiles.imap.modifytimestamp = 20050519055448Z
    logfiles.imap.objectclass = nsmsgCfgAlias
    ,top
    logfiles.imta.alias = |logfile|imta
    logfiles.imta.createtimestamp = 20050519053744Z
    logfiles.imta.creatorsname = "cn=directory manager"
    logfiles.imta.modifiersname = "cn=directory manager"
    logfiles.imta.modifytimestamp = 20050519055448Z
    logfiles.imta.objectclass = nsmsgCfgAlias
    ,top
    logfiles.modifiersname = "cn=directory manager"
    logfiles.modifytimestamp = 20050519053744Z
    logfiles.objectclass = nsmsgCfgContainer
    ,top
    logfiles.pop.alias = |logfile|pop
    logfiles.pop.createtimestamp = 20050519053744Z
    logfiles.pop.creatorsname = "cn=directory manager"
    logfiles.pop.modifiersname = "cn=directory manager"
    logfiles.pop.modifytimestamp = 20050519055448Z
    logfiles.pop.objectclass = nsmsgCfgAlias
    ,top
    modifiersname = "cn=directory manager"
    modifytimestamp = 20050519055448Z
    nsclassname = "[email protected]@cn=admin-serv-bdc3srssu3, cn=Administration Server, cn=Server Group, cn=bdc3srssu3.sunray.bdc3.co.in, ou=sunray.bdc3.co.in, o=NetscapeRoot"
    objectclass = top
    ,nsAdminObject
    ,nsConfig
    pipeprograms.createtimestamp = 20050519053745Z
    pipeprograms.creatorsname = "cn=directory manager"
    pipeprograms.modifiersname = "cn=directory manager"
    pipeprograms.modifytimestamp = 20050519053745Z
    pipeprograms.objectclass = nsmsgCfgContainer
    ,top
    service.authcachesize = 10000
    service.authcachettl = 900
    service.createtimestamp = 20050519053745Z
    service.creatorsname = "cn=directory manager"
    service.dcroot = "dc=sunray,dc=bdc3,dc=co,dc=in"
    service.defaultdomain = sunray.bdc3.co.in
    service.dnsresolveclient = no
    service.http.allowadminproxy = no
    service.http.allowanonymouslogin = no
    service.http.createtimestamp = 20050519053745Z
    service.http.creatorsname = "cn=directory manager"
    service.http.enable = 1
    service.http.enablesslport = 1
    service.http.fullfromheader = no
    service.http.idletimeout = 3
    service.http.ipsecurity = yes
    service.http.maxmessagesize = 5242880
    service.http.maxpostsize = 5242880
    service.http.maxsessions = 6000
    service.http.maxthreads = 250
    service.http.modifiersname = "cn=msg-config,cn=sun one messaging suite,cn=server group,cn=bdc3srssu3.sunray.bdc3.co.in,ou=sunray.bdc3.co.in,o=netscaperoot"
    service.http.modifytimestamp = 20050519063623Z
    service.http.numprocesses = 1
    service.http.objectclass = top
    ,nsmsgCfgHttp
    service.http.plaintextmincipher = 0
    service.http.port = 80
    service.http.resourcetimeout = 900
    service.http.sessiontimeout = 7200
    service.http.smtpport = 25
    service.http.spooldir = /opt/SUNWmsgsr/data/http
    service.http.sslcachesize = 0
    service.http.sslport = 443
    service.http.sslusessl = yes
    service.imap.allowanonymouslogin = no
    service.imap.banner = "%h %p service (%P %V)"
    service.imap.createtimestamp = 20050519053745Z
    service.imap.creatorsname = "cn=directory manager"
    service.imap.enable = 1
    service.imap.enablesslport = 1
    service.imap.idletimeout = 30
    service.imap.maxsessions = 4000
    service.imap.maxthreads = 250
    service.imap.modifiersname = "cn=directory manager"
    service.imap.modifytimestamp = 20050519055449Z
    service.imap.numprocesses = 1
    service.imap.objectclass = top
    ,nsmsgCfgImap
    service.imap.plaintextmincipher = 0
    service.imap.port = 143
    service.imap.sslcachesize = 0
    service.imap.sslport = 993
    service.imap.sslusessl = yes
    service.ldapmemcache = no
    service.ldapmemcachesize = 131072
    service.ldapmemcachettl = 30
    service.listenaddr = INADDR_ANY
    service.loginseparator = @
    service.modifiersname = "cn=directory manager"
    service.modifytimestamp = 20050519055449Z
    service.objectclass = top
    ,nsmsgCfgService
    service.plaintextloginpause = 0
    service.pop.allowanonymouslogin = no
    service.pop.banner = "%h %p service (%P %V)"
    service.pop.createtimestamp = 20050519053745Z
    service.pop.creatorsname = "cn=directory manager"
    service.pop.enable = 1
    service.pop.enablesslport = 1
    service.pop.idletimeout = 10
    service.pop.maxsessions = 600
    service.pop.maxthreads = 250
    service.pop.modifiersname = "cn=directory manager"
    service.pop.modifytimestamp = 20050519055449Z
    service.pop.numprocesses = 1
    service.pop.objectclass = top
    ,nsmsgCfgPop
    service.pop.plaintextmincipher = 0
    service.pop.popminpoll = 0
    service.pop.port = 110
    service.pop.sslport = 992
    service.pop.sslusessl = yes
    service.readtimeout = 10
    store.admins = admin
    store.cleanupage = 1
    store.createtimestamp = 20050519053745Z
    store.creatorsname = "cn=directory manager"
    store.dbcachesize = 16777216
    store.defaultacl = "anyone lrs"
    store.defaultmailboxquota = -1
    store.defaultmessagequota = -1
    store.defaultpartition = primary
    store.diskflushinterval = 15
    store.expirerule.createtimestamp = 20050519053745Z
    store.expirerule.creatorsname = "cn=directory manager"
    store.expirerule.modifiersname = "cn=directory manager"
    store.expirerule.modifytimestamp = 20050519053745Z
    store.expirerule.objectclass = nsmsgCfgContainer
    ,top
    store.modifiersname = "cn=directory manager"
    store.modifytimestamp = 20050519055449Z
    store.objectclass = top
    ,nsmsgCfgStore
    store.partition.createtimestamp = 20050519053745Z
    store.partition.creatorsname = "cn=directory manager"
    store.partition.modifiersname = "cn=directory manager"
    store.partition.modifytimestamp = 20050519053745Z
    store.partition.objectclass = top
    ,nsmsgCfgContainer
    store.partition.primary.createtimestamp = 20050519053745Z
    store.partition.primary.creatorsname = "cn=directory manager"
    store.partition.primary.modifiersname = "cn=directory manager"
    store.partition.primary.modifytimestamp = 20050519055449Z
    store.partition.primary.objectclass = top
    ,nsmsgCfgPartition
    store.partition.primary.path = /opt/SUNWmsgsr/data/store/partition/primary
    store.quotaenforcement = on
    store.quotaexceededmsginterval = 7
    store.quotagraceperiod = 120
    store.quotanotification = off
    store.quotawarn = 90
    store.serviceadmingroupdn = "cn=Service Administrators,ou=Groups, dc=sunray,dc=bdc3,dc=co,dc=in"
    store.umask = 077

    i had the "Mailbox is on a different server" error too recently (mine shows up in ms outlook express) - and believe my problem came from having the hostnamealiases space delimited instead of comma separated (with no spaces, e.g. "foo.host1.com,bar.host2.com") - comma delimited, no spaces seems to be required ...
    i am having a different problem now though:
    i can login to communications express hosted domains via -
    the main host url using credentials like: [email protected]/passwd
    but when going to any of the hosted.com's urls, and trying to login without the @hosted1.com in the user - i get redirected to access manager (and subsequently can't login using either uid or [email protected] at the hosted1.com/uwc url).
    here's what i have in AMConfig.properties:
    com.sun.identity.server.fqdnMap[mail.hosted1.com]=mail.actual.org
    com.sun.identity.server.fqdnMap[mail.hosted2.com]=mail.actual.org
    com.sun.identity.server.fqdnMap[mail.hosted3.com]=mail.actual.org
    here's what i have in uwcauth.properties:
    virtualdomain.mode = y
    mail.actual.org.isvirutalhostname=mail.actual.org
    i have also added the cookiedomains in amconsole under service configuration --> platform - in addition to creating directories (hosted1.com, hosted2.com, hosted3.com) under /opt/SUNWuwc/WEB-INF/domain - containing the original files and directories under /opt/SUNWuwc/WEB-INF/domain (i was not clear if these directories should take this form e.g. including the .com or if they should just contain the domain-name --e.g. hosted1?)
    i can receive hosted email via pop using uid [email protected]/passwd, etc.
    thanks for any input.
    s7
    using sparc 2005q4 msg -58; uwc - 42

  • The user and the mailbox are in different Active Directory Sites

    Hi All,
    I have 2 site, each site have an Exchange Server 2010 SP1, let say Site HQ and Site DRC I monitored it with SCOM 2007 R2, site HQ successfully monitored, then I continue try to monitor DRC site. I executed new-TestCasConnectivityUser.ps1 at MBX DRC Site
    to create extest user.
    Then I try to execute command to test-connectivity, but it failed.
    Test-OwaConnectivity -TestType:Internal -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true | fl
    RunspaceId                  : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
    AuthenticationMethod        :
    MailboxServer               : CONMBX02.contoso.com
    LocalSite                   : CONMBX02.contoso.com
    SecureAccess                : False
    VirtualDirectoryName        :
    Url                         :
    UrlType                     : Unknown
    Port                        : 0
    ConnectionType              : Plaintext
    ClientAccessServerShortName : DRCCAS01
    LocalSiteShortName          : CONMBX02
    ClientAccessServer          : DRCCAS01.contoso.com
    Scenario                    : Reset Credentials
    ScenarioDescription         : Reset automated credentials for the Client Access Probing Task user on Mailbox server CON
                                  MBX02.contoso.com.
    PerformanceCounterName      :
    Result                      : Failure
    Error                       : [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while t
                                  rying to access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extes
                                  t_xxxxxxxx
                                   Additional information:
                                   [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in
                                  different Active Directory sites..
    UserName                    : extest_xxxxxxxx
    StartTime                   : 04/01/2012 20:46:19
    LaCONcy                     : 00:00:00.0156460
    EventType                   : Error
    LaCONcyInMillisecondsString :
    Identity                    :
    IsValid                     : True
    WARNING: No Client Access servers were tested.
    RunspaceId          : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
    Events              : {Source: MSExchange Monitoring OWAConnectivity Internal
                          Id: 1005
                          Type: Error
                          Message: Couldn't access one or more test mailboxes.
                          The service that is being tested will not run against these mailboxes.
                           Detailed information:
                          Local Site:DRCProduction
                          [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while trying to
                           access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extest_xxxxxxxx
                           Additional information:
                           [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in differen
                          t Active Directory sites..
    PerformanceCounters : {Object: MSExchange Monitoring OWAConnectivity Internal
                          Counter: Logon LaCONcy
                          Instance: DRCCAS01.contoso.com|DRCProduction
                          Value: -1000}
    any help appreciate it.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Krisna Ismayanto | My blogs:
    Krisna Ismayanto | Twitter: @ikrisna

    Hi
       Removed existing test account on two site.
       Then created test account on DGC through new-TestCasConnectivityUser.ps1.
       Flushed Health Service on RMS.
    Terence Yu
    TechNet Community Support
    Hi
    What do you mean on DGC ? you mean I have remove both test account or just at DRC site only ?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Krisna Ismayanto | My blogs:
    Krisna Ismayanto | Twitter: @ikrisna

  • Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

    I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
    Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
    ...errors with the following output:
    An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
     Additional information:
     [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
    es..
        + CategoryInfo          : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
       OutlookConnectivity], CasHealthStorageErrorException
        + FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
    I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG.  The command works well if run a CAS server in the active DB site.

    Hi,
    Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
    https://www.testexchangeconnectivity.com/
    Thanks,
    Simon Wu
    TechNet Community Support

  • How to Check Images File Exist? in different server

    Hi,
    I have 10 different coldfusion server.
    for example 9 server is for the web application site - for
    example
    http://myserverone/studentweb
    the other one is for images website, just for displaying
    student picture - for example
    http://myserverimage/studentpicture.
    the purpose of this website is to display student picture
    that i store as gif files.
    from my studentweb website i will call the images from
    studentpicture website as source for my image placeholder.
    for example this is my code i'm calling form
    http://myserverone/studentweb
    website:
    <img src="
    http://myserverimage/studentpicture/#studentnumber#.gif"
    alt="" name="studentpicture" width="160" height="200">
    my problem is, if there is no specific student picture in my
    studentpicture website, then the placeholder will display an X (
    mean the images not found )
    how do i prevent the X to display?
    how do i using coldfusion or any kind of way to check if the
    images exist on that website ( different server ), so if the images
    is not found, i can display a default images? i can do this if i'm
    calling the website in the same server, but not using a different
    server.
    this is like using other website images for your own personal
    website and sometimes the owner delete the images from their
    website, and i want to display my own images if that images been
    removed from the source website.
    anyone have done this before?
    thanks for suggestion and guide...
    haire

    1. Use CFHTTP with method="HEAD".
    2. See, if the HTTP status code is 200.
    The head-method is of course more efficient, as it doesn't
    need to "get" the message body. However, a status code of 200 is
    possible even when the requested image file is no longer on the
    server.

  • How to store jpeg images in SQL server using NI database Connectivity Toolset. Can anyone please help me in this regard.

    Please tell how to store jpeg images in SQL Server using NI Database Connectivity Toolset.

    http://www.w3schools.com/sql/sql_datatypes.asp
    You setup a field as BLOB and store the binary of the picture there. Depending on the database it can be called differently as you can see in the link, in SQL server there's even a Image datatype.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • With an IMAP account, if "Store sent messages on the server" is checked does Mail only store mail on the server?

    With an IMAP account, if "Store sent messages on the server" is checked (in Mailbox behaviors) does Mail only store sent mail on the server?
    So should it not be checked if you want Mail to store sent mail on the server and the computer?
    Thank you.
    iHope

    Hi Norm G,
    Thanks for your comments and the link to further information.
    With it checked you will get both on the server and the Mac.
    I have it checked, yet when I pause the curser over Sent mailbox the tooltip says "Contents stored on server. Name on server: Sent Messages". Does this mean stored only on the server or also on the server?
    What does your tooltip say?
    At the moment sent emails only appear in that Sent mailbox. If Mail also stores them on the Mac should they also appear in another Sent folder "On My Mac"?
    Thanks for your help.
    iHope

  • Broken mailbox - 10.4.6 server

    Hi
    One of my users had a broken mailbox, so I tried to Reconstruct it in Server Admin. This appeared to do nothing at all! I also tried running reconstruct from the command-line in Terminal (/usr/bin/cyrus/bin/reconstruct daxxxx) but this didn't appear to do anything either!
    As the user hadn't too many new messages in the mailbox, he was quite happy for me to delete and recreate the user account. The bad news is that although the user account in Workgroup Manager was deleted, the mailbox account was not. So when I added a new user with the same name (so as not to have to change the email address), this simply picked up the old broken mailbox! (This one wouldn't reconstruct either).
    The end result is that I have had to set up a totally different user account and forward the email from the original account to this one. Whilst this works, it's not the solution I wanted.
    What could I have done to either reconstruct the original mailbox properly or completely deleted and re-instated the user account?
    Thanks for your help on this one.
    Richard.
    PS the instructions for recreating the mailboxes on 10.3 server is said in the documentation not to work on 10.4 server, so I didn't try them, although I have used them in the past on 10.3 server.

    Thanks for the advice. It's taken me a while to get back to this one.
    The single sheet PDF by Ben Masters proved to be the most useful advice, although I had to make some changes in order to delete the broken mailbox.
    First, I had to Stop and Start Mail in order to get the admin change in /etc/imapd.conf to take effect.
    Second, where the original document gave user/testuser in the cyradm commands, I had to substitute 'Other Users'/testuser. This is because the lm command results showed as
    Other Users/testuser
    Other Users/testuser1
    and so on.
    Third, the sam and dm commands wouldn't work because the permissions on the items in the broken mailbox were set as 600. Once I did a chmod to 777 the sam and dm commands worked properly and I was finally rid of the broken mailbox.
    I hope that other visitors here may find these comments helpful.
    Mac OS X (10.4.6)
    Mac OS X (10.4.6)

  • Unable to store sent message on Yahoo server

    When I send an email from Mail ( Lion OS Mail) I am unable to store the sent message on the Yahoo server.
    I have set up my Yahoo email account as a POP account & I do not see the option of “ Store sent message on the server” as in iCloud email.
    The iCloud email is set up as IMAP.
    Any help to solve this problem is appreciated

    Right with POP Sent emails only show on your local computer unless you are using IMAP and even then it is a setting in the mail program and the IMAP server to store all sent emails on the server. With Gmail they are included in the All Mail folder. But Yahoo is different and only if you have a paid Yahoo account do you have access to their IMAP system.
    No way to do that with POP.

  • Exchange 2010 outlook and mailbox move to another server

    does a user need to create a new profile when mailbox has been moved to a different server?
    TM

    Right, they don't need to recreate their outlook profile.
    Cheers,
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Store Driver of Hub Transport server.

    Hi Team ,
                I would like to know what is the "exe" name for Store driver of Hub transport Server which is responsible for putting messages to Submission Queue.

    Hi,
    Store.exe is a process, it indicates that Exchange information store service is running.
    The store driver is a software component of the Hub Transport Server that delivers inbound messages to Microsoft Exchange stores, the databases that contain public folder stores and mailbox stores. The store driver also retrieves messages from a user's outbox,
    and submits them for delivery.
    Hope my clarification is helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Pulling data from a second sharepoint site that is on a different server

    Hi,
    I need to pull some news stories located in a list on a separate sharepoint site on a separate server. I will also be filtering the stories pulled using a custom column on the list on the source site. Can anyone tell me what would need to configure
    to be able to do this?
    thanks,
    Sherazad
    Sherazad

    Hi,
    According to your post, my understanding is that you want to pull data from a second SharePoint site that is on a different server.
    If the two servers are in the same domain, you can enter the site url in the brower directly.
    If the two servers are in the different domains, you need to create a trust between the domains.
    More information:
    http://stackoverflow.com/questions/12780886/cross-domain-access-in-sharepoint-2010
    http://www.boostsolutions.com/blog/how-to-add-trust-domains-in-a-sharepoint-farm/
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • How to Upload Web App images to different server?

    Hello,
    is it possible to configure web app item submission so images are uploaded to a different server (not BC)?
    Customers are uploading lots of images with their web app items and I'm really getting short on server storage. Buying extra space in BC servers is a bit expensive, especially when I need loads of it. Smart thing would be to AUTO resize images to take much less space in the server but this is not possible with BC as no back end is allowed (maybe this could good improvement in next releases? "Auto resizing images to the value indicated"). Some customers are uploading images of up to 9 MB size X 20. I could limit upload size (i guess), but thats a big hit to UX, they should then bother resizing their images on some software before uploading.
    So far my solution is to simply download images from the server, resize them manually with PS and then upload them back again. Maybe someone knows better solution than photoshop to automate the resizing process? I actually can automate the process with PS but image names changes and this is another problem. So a program to auto resize loads of images and keep their original names?
    Another solution could be manually storing images to another server and retyping the links in web app items, but its a bit too crazy
    Thanks

    Hi Ray,
    Indeed, this is not possible as an 'out of the box' feature and looks like a long-shot if attempting to use a separate server for storage.

  • Migrating SSO to a different server

    Hi,
    We are using Oracle SSO on Oracle HTTP server.
    AS requirement, we need to be moving to a different server with different IP, but out domain names will remain same.
    Do we need to re-request the SSO credentials again? Or simply performing the steps (cleartext, and apobfuscate) again on the new server with the old details will get this going?
    Please help.
    Thanks in advance.

    Yes, using dsmig is a supported method of migrating schema. However, dsmig requires local disk access to both the old instance and the new instace. Often times during migrations the new DS instance is on a new or different piece of hardware. In those cases to use dsmig you would have to either tar up the old instance, copy and un-tar it somewhere on the new system or, I suppose, you could set up a temporary NFS mount to the old system. I find either of these to be more work than is necessary. I almost always resort to a manual migration process as I know I am in control of everything being migrated. Sun does support the manual method as well and it is documented at:
    http://docs.sun.com/app/docs/doc/820-2762/dsmanual?a=view
    The section specifically on manually migrating schema is at:
    http://docs.sun.com/app/docs/doc/820-2762/schemamanual?a=view

  • Is it possible to manually setup a Folder Redirection Policy on SBS 2008 for one user? Also are you able to set up folder redirection on a different server than you have SBS 2008 on?

    I have a SBS 2008 DC I would like to be able to change the Folder Redirection to a different server.  I also would like to be able to test with one user.  I read on the forums that it is best to use the wizards for SBS2008.  The only problem
    I have with using the wizards is that I am unable to test and I am also unable to use a network share for my redirection location.  

    Hi,
    I am sure you would get some help from :
    http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
    https://social.technet.microsoft.com/Forums/en-US/448583ca-471e-4a0c-9d26-aa9181e73962/folder-redirection-changing-location?forum=smallbusinessserver
    User setting can be found:
    Windows SBS Console > Shared Folders and Web Sites > Shared Folders - in Tasks panel click on Redirect folders for user accounts to the server.
    Under Folder Names Select folder(s) you want to redirect (e.g. Documents).
    Under User Accounts select accounts you want to have folders redirected.
    Click OK
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Maybe you are looking for

  • How do you get a movie to play without a menu

    I've installed ilife 09 and it now says I'm using version 7.0.4 of IDVD. I've used version 6 for years, so much is new. However, I already created a fairly complex DVD in this version with my own background menu, buttoms, chapters, etc. That was in r

  • Transferring workspace from CC to CS6

    how do i transfer my workspace and edit individual colors and shapes in CS 6. I was usuing CC previously. It allows me to paste all the graphics but i cant edit individually. thanks!

  • Can't delete or retire application because of a (Non-existent) dependent Task sequence

    Hello. I am trying to delete an outdated application from my SCCM environment. However when i try to delete I get the warning that the application cannot be deleted because of 1 dependent task sequence. I have been through every single task sequence

  • Inspection lot not being created against inspection type 10 or 02

    Hi We need to inspect material at the time of goods being delivered to material. I did the following steps: 1. in SPRO, Assign Inspection Lot Origin to Delivery Type, against Delivery Type LF we mentioned insp. origin 10  2. Assigned insp. type 10 in

  • Did all updates, now seeing wild blue flares for darks in RAW 6.3

    When adjusting my darks in RAW now blue flares are popping up instead of blacks.  Even now opening my old photos (that were fine before) are covered in wild blue flares instead of blacks.  Anyone know what's going on here? EDIT:  This is really weird