The user and the mailbox are in different Active Directory Sites

Hi All,
I have 2 site, each site have an Exchange Server 2010 SP1, let say Site HQ and Site DRC I monitored it with SCOM 2007 R2, site HQ successfully monitored, then I continue try to monitor DRC site. I executed new-TestCasConnectivityUser.ps1 at MBX DRC Site
to create extest user.
Then I try to execute command to test-connectivity, but it failed.
Test-OwaConnectivity -TestType:Internal -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true | fl
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
AuthenticationMethod :
MailboxServer : CONMBX02.contoso.com
LocalSite : CONMBX02.contoso.com
SecureAccess : False
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : DRCCAS01
LocalSiteShortName : CONMBX02
ClientAccessServer : DRCCAS01.contoso.com
Scenario : Reset Credentials
ScenarioDescription : Reset automated credentials for the Client Access Probing Task user on Mailbox server CON
MBX02.contoso.com.
PerformanceCounterName :
Result : Failure
Error : [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while t
rying to access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extes
t_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in
different Active Directory sites..
UserName : extest_xxxxxxxx
StartTime : 04/01/2012 20:46:19
LaCONcy : 00:00:00.0156460
EventType : Error
LaCONcyInMillisecondsString :
Identity :
IsValid : True
WARNING: No Client Access servers were tested.
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
Events : {Source: MSExchange Monitoring OWAConnectivity Internal
Id: 1005
Type: Error
Message: Couldn't access one or more test mailboxes.
The service that is being tested will not run against these mailboxes.
Detailed information:
Local Site:DRCProduction
[Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while trying to
access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extest_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in differen
t Active Directory sites..
PerformanceCounters : {Object: MSExchange Monitoring OWAConnectivity Internal
Counter: Logon LaCONcy
Instance: DRCCAS01.contoso.com|DRCProduction
Value: -1000}
any help appreciate it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisna

Hi
   Removed existing test account on two site.
   Then created test account on DGC through new-TestCasConnectivityUser.ps1.
   Flushed Health Service on RMS.
Terence Yu
TechNet Community Support
Hi
What do you mean on DGC ? you mean I have remove both test account or just at DRC site only ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisna

Similar Messages

Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
...errors with the following output:
An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], CasHealthStorageErrorException
+ FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG. The command works well if run a CAS server in the active DB site.

Hi,
Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
https://www.testexchangeconnectivity.com/
Thanks,
Simon Wu
TechNet Community Support

Mapping and Monitoring all the User and the Field exits

Hello Dears,
Are possible, with the Solution Manager to map and monitor all the user and the field exists existing in my ECC6 Productivity Environment?
Anyone has some documentation?
Regards to all.
FS.

Hello Gurus,
Someone has any information about this question?
Regards to all.
FS.

Display the users middle initial or middle name in active directory and it shows in outlook 2010 as well.

I would like for the users middle initial or middle name to show in outlook 2010. I
can set it in the header meaning I see the middle initial when the email comes in but its not in the signature. I read a post about the middle name attribute has to be set in a/d? if that is the case please provide some feed back on how to accomplish that?
server 2008, a/d 2008

In AD, the attribute name is "middleName". You can populate it in bulk using Powershell with
Set-ADUser cmdlet.
For Exchange questions, I would recommend asking them here: http://social.technet.microsoft.com/Forums/exchange/en-us/home?category=exchangeserver
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

To know the users and the variables for the query

Hi,
Say I have one query and which is executed 5 times in the day n i can see this in ST03N Expert mode. Now, suppose i want to see the users who executed the query and what are the selections they gave for the query to run, is there a place to see this?
Appreciate your time
Sriram

Sriram,
You can use BW Statistics to view technical information regarding users. SAP also delivers queries that give you usage by users, just install from business content. The statistics cubes extract data from various tables including:
RSDDSTAT
RSDDSTATAGGR
etc..
You can search more, names will start with "RSDDSTAT*"
Hope it helps,
Farhan

Difference in the Demand and the Released Demand to SNP for the month M0

Hi evryone,
I have released the demand from DP to SNP of a market on 03.02.2010 .
Demand of M0 there is difference between the Forecast of the user and the demand released to the SNP.
For rest of the months the demand Forecasted by the user and the demand released to the SNP is matching.
I hope this difference is because I had released the demand on 03.02.2010, so the demand of the 01.02.2010 & 02.02.2010
was not released to SNP. This is my guess only.
Please tell me whether I am correct or not ?
If I am wrong, please tell me the reasons for the difference in the month M0.
with regards,
balu

Hi Balu ,
If your forecast is released on 03022010 and you have a setting for period split as 2, then your understanding is correct .
The M0 demand /forecast volume will be reduced by the qty of deliveries you made on 01 & 02022010 due to the requirement stateliest and forecast consumption process which is a std functionality.
So please check if diff in original demand and released demand is same as of invoiced qty .. this will ensure your understanding.
Also other factor that could affect the SNP released demand qty is 'Backward/Forward consumption period' in material master/product master.This is the period for forecast consumption and the direction depends on the defined consumption mode-
so in future you could have a scenario that you have maintained forward consumption as ex. 60 days and there is no forecast in M0 but have some excess deliveries on 01M02010 and then the next months forecast will be consumed by that excess qty of delivery in M0 2010 and you would get diff volume in M12010 month.
Hope this clears the doubt...
Regards,
Digambar

Error The PC and the printer are connected to different networks

Hi,
I'm trying to set up my C4580 on my laptop, but I'm getting the following error after the diagnostic test:
The PC and the printer are connected to different networks(237DB2A87D and 66616B65). They must be connected to the same network. This can happen when you use the manufacturer's default network name (SSID) and another nearby network is using the same name.
My setup is a Linksys router WRT546, my laptop is conntected wireless to the router. I have two other desktop computers that are directly connected to the router. Both the desktops are able to connect wireless to the printer. My router SSID name is 'Blair Office' with WPA security.
I get a internet connect fine with the laptop, but can't get the new printer to setup.
I saw another post that talked about 'Print the C45** Network Configuration Page', but not sure how to do this
Thanks
Diane

This reply may be late for this user, but it might be helpful for any current users.
I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
This worked for me after I read several other postings.
Good luck!

TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!

I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?
please help my what can i do?
IMEI : 012658006380001

Welcome to the Apple community Kobra.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

The source and target structure have a different number of fields

Hi,
I am new to workflow and I am trying to create an attachment in Workflow (SAP ECC 6.0) and pass it through to a User Decision (User Decision works fine) however the workflow is failing on the attachment step with u2018The source and target structure have a different number of fieldsu2019. The bindings check ok. Please see details below.
I have used document u2018Creating Attachments to Work Items or to User Decisions in Workflowsu2019 by Ramakanth Reddy for guidance. Thanks in advance.
1) Workflow containers (SWDD)
WORKITEMID (import)
ZSWR_ATT_ID (export)
SOFM (export)
2) Task Container (PFTC)
1 Import parameter defined u2013 WORKITEMID (swr_struct-workitemid)
2 Export parameters defined
- SOFM (Ref. obj. type SOFM)
- ZSWR_ATT_ID (swr_att_id-doc_id)
Binding task -> Method
Binding for 1 parameter (import) defined
Task <- Method
Binding for 2 parameters (export) defined
3) Z BOR object created with a Method, Method Parameters and Event (SWO1)
1 import parameter defined
2 export parameters defined
Method calls FM SSF_FUNCTION_MODULE_NAME, CONVERT_OTF, SCMS_XSTRING_TO_BINARY and SAP_WAPI_ATTACHMENT_ADD
Workflow is triggered by FM SAP_WAPI_CREATE_EVENT, Return_code = 0
Event_id = 00000000000000000001
Test results
A) Triggered by ABAP/ FM SAP_WAPI_CREATE_EVENT - SWI2_DIAG results
Work item 14791: object <z bor object name> method <method name> cannot be executed. The source and target structure have a different number of fields (this message is repeated 3 times). Error handling for work item 14791. No errors occurred -> details in long text (message is repeated 3 times).
Message no. WL821, OL383, WL050 in long text
B) Z BOR Test method <execute>
Enter workitem id.
Runtime error - Data objects in Unicode programs cannot be converted. The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible. Since this statement is in a Unicode program, the special conversion rules for Unicode programs apply.
In this case, these rules were violated.
Program                             SAPLSWCD
Include                                LSWCDF00
Row                                    475
Module type                        (FORM)
Module Name                      MOVE_CONTAINER_TO_VALUE
C) Z BOR Test method <debugging>
Enter workitem id.
SAP_WAPI_ATTACHMENT_ADD, return_code = 0, message_lines = Attachment created
both swc_set_element container work ok
Runtime error occurs after end_method executed. Data objects in Unicode programs cannot be converted.
D) Workflow test
Enter workitem id <execute>
Task started> Workflow log> Status = Error
Workflow errors in Attachment step (however Office document can be viewed in details for step).

Problem has now been resolved. Problem was related to use of swr_att_id structure and swc_set_element statement in BOR program - problem resolved by only setting w/f container to swr_att_id-doc_id.

How do I compare two csv files and not disable the user if the username is found in the 2nd file using powershell?

Hi Guys
I have two csv files with the following headers and I need to import both files into the script to check whether the StaffCode is present in the Creation/Renewal of Contract csv in a DisableAccount Script so I can stop any action to disable the account as
the staff has renewed the contract with the company so the account should not be disabled.
However my accounts are still being disabled. I am not sure now to construct the query so that it detects that the account is to be left alone if the staffcode is present in both files
I does recognize that the $staffcodeN in the renewal file matches the $staffcode in the termination file
but still proceeds to disable or set an expiry date to the account anyway based on the termination file.
How do I stop it from doing that?
1)In the Creation/Renewal of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityNo,DateJoin,Grade,Dept,LastUpdateDate,EffectiveDate
2)In the Disable of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityno,LastDateWorked,Grade,Dept,LastUpdateDate,
My data is not very clean , I have a-lot of special characters such as = , ' ,/ and \ characters to remove first before i can compare the data
Thanks for the help in advance.
Yours Sincrely
Vicki
The following is a short snippet of the code
$opencsv = import-csv "D:\scripts\Termination.csv"
$opencsv2 = import-csv "D:\scripts\RenewContractandNewStaff.csv"
foreach ($usertoaction in $opencsv)
$Trancode = $usertoactionTranCode
$StaffCode = $usertoaction.StaffCode.replace("=","").replace('"','')
$LastName = [string]$usertoaction.LastName.Replace("/","\/").Replace(",","\,")
$FirstName = [string]$usertoaction.FirstName.Replace("/","\/").Replace(",","\,")
$socialsecurityno = $usertoaction.SocialSecurityNo.replace("=","").replace('"','')
$DateJoin = $usertoaction.DateJoin.replace("=","").replace('"','')
$LastDateWorked = $usertoaction.LastDateWorked.replace("=","").replace('"','')
$Grade = [string]$usertoaction.Grade
$Dept = [string]$usertoaction.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$AccountExpiry = [datetime]::Now.ToString($LastDateWorked)
foreach ($usertoaction2 in $opencsv2)
$TrancodeN = $usertoaction2.TranCode
$StaffCodeN = $usertoaction2.StaffCode.replace("=","").replace('"','')
$socialsecurityNoN= $usertoaction2.SocialSecurityNo.replace("=","").replace('"','')
$DateJoinN = $usertoaction2.DateJoin.replace("=","").replace('"','')
$GradeN = [string]$usertoaction2.Grade
$DeptN = $usertoaction2.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$EffectiveDate = $usertoaction.EffectiveDate.replace("=","").replace('"','')
$LastName2 = [string]$usertoaction2.LastName.Replace(",", "").Replace("/","").trim()
$FirstName2 = [string]$usertoaction2.FirstName.Replace("/","").trim()
# Use DirectorySearcher to find the DN of the user from the sAMAccountName.
$Domain = [System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()
$Root = $Domain.GetDirectoryEntry()
$Searcher = [System.DirectoryServices.DirectorySearcher]$Root
$Searcher.Filter = "(sAMAccountName=$samaccountname)"
$doesuserexist1 = $Searcher.Findall()
if ($doesuserexist1 -eq $Null)
{Write-Host $samaccountname "account does not exist"}
elseif ($StaffCodeN -match $staffcode)
write-host "user has renewed the contract, no action taken"
else
if(($lastupdatedate -ne $null)-or($LastDateWorked -ne $null))
write-host "Setting Account Expiry to"$accountexpirydate
#$ChangeUser.AccountExpires = $accountexpirydate
#$Changeuser.setinfo()
if ($UserMailforwarding -ne $null)
#Set Account expiry date to Last Date Worked
# $ChangeUser.AccountExpires = $accountexpirydate
# $Changeuser.setinfo()
write-host "staff" $displayname "with staff employee no" $samaccountname "has
mailforwarding"
Write-host "Please disable the account manually via Active Directory Users & Computers and
Elseif ($accountexpirydate -lt $todaysdate)
#disable the account

Hi Vicki,
This Forum has an insert-codeblock function. Using it will make your script far more readable
Your script is missing some parts, it is impossible to follow the problem.
You are performing the same string cleaning action on $opencsv2 for each element in $opencsv, when doing it once should suffice. Why not start it all by cleaning the values and storing the cleaned values in new arrays?
The Compare-Object function is great, why not take it out for a stroll on these lists, it might just safe you lots of unnecessarily complicated code ...
You are creating a new $Domain, $Root and $Searcher object each iteration, when doing it once should suffice. Probably not much of a time-saver, but every little thing contributes.
Try pinpointing the problem by doing extensive logging, not only by writing which action was taken, but writing the inidividual information (variables, mostly) before evaluation occurs. Your if/elseif/else looks sound, so if it's still not doing what you
want, the ingoing data must be different from what you think should be there.
Cheers,
Fred
There's no place like 127.0.0.1

UCM Administration Applets request the user and password confirmation

I want to ask if someone has experienced in the UCM Administration Applets, that request the user and password confirmation for each time the applets are executed,
Is there any configuration in the UCM that activates this behavior?
I’m trying to reproduce this behavior in the development environment but with not much success
The UCM version is 10.350
Thanks for your support.

Is there any configuration in the UCM that activates this behaviorNo. It's more likely that you are accessing the applets via a URL that does not match the one you originally used to log in to the Content Server.
For example, you logged into "http://myserver/cs" or "http://<ip address>/cs". However, your HttpServerAddress variable is defined in Content Server as "http://myserver.mydomain.com". (Any absolute links to the applets use the variable to build the URL.) The browser "thinks" this is a new domain, and doesn't forward credentials to the different address. So the applet must prompt again for credentials. (Are you using a load balancer by chance? Does your HttpServerAddress variable in Content Server match the DNS entry being used for the load balancer?)
I've also seen some versions of the Sun client JRE do this by design as a security "feature". If you using IE, make sure your server address is in the "trusted" or "intranet" security zone.

What is the user and password to Oracle 8.17

Dear expert,
I have loaded IDES 4.7 with Oracle 8.17.
I wish to query the SAP table using Oracle PL/SQL.
What is the user, password and string to login into SAP Oracle database? Since I was not asked for user and password when installing Oracle I do not know how to login.
Also can you let me know how to view/change table fields in SAP tables. I understand there are different ways but which in your opinion is the easiest to find the record I want to correct(as some tables have many fields).
Your kind assistance is appreciated.

Thank you for your reply. Both the user and password does not work on my IDES 4.7e system.
However I tried with user Internal and without password and I successfully login.
I then create a new user and also change the user=system
password.

How do the User and Shared Folders relate to the main drive? Can we delete?

I'm curious how the User and Shared folders relate to the main hard drive and if there is duplicate files in these folders and the main hard drive. Some software programs I have seemed to have loaded content/info into these folders and I'm wondering why they put files in there instead of just the regular main hard drive pathing. These 2 folders are more confusing than anything. I can see that might be of use to a family and each family member wants to keep files in a personal file, but when I'm the only one using my computer, it seems like I should have the option to remove these folders completely, but I don't because I feel like I would be deleting some important files that I wasn't aware were in these folders.
Another thing is, when I click on User folders (at least I think it's the User and not Shared folder), it brings up my name and 'Shared' in 2 seperate subfolders. Is anything in these folders duplicates of what's on my main hard drive? Is there anything significant about these folders if I'm the only user on my computer?
I would nice to get rid of clutter and to eliminate options for software to install things by deleting these folders and not have home/user/shared folders. Is that possible?

stikygum wrote:
Yeah, I'm really low on space, so I'm going about a bunch of different consolidating options. But I mainly posted my main question to help me understand what 'stuff' is in the User and Shared folders and whether or not they act like an Alias, in order to help me make an informed decision what is best for my needs.
They are not aliases; it is a hierarchy, and there is intentional duplication at different levels. This is a feature.
First thing is that Users and Shared are at different levels. Users is at the top level, but Shared is one level inside Users, at the same level as any other user account you have created.
Therefore, if you delete the Users folder, you delete all user accounts, which means you delete all personal data. OS X probably won't even let you delete the Users folder unless you start up from a different hard drive, because you can't delete your user account while you are running in it.
Now, more about the hierarchy. The intentional duplication is so that documents and software can exist for individual users or all users. For example, there are multiple Applications folders:
Hard Drive\Applications - applications any user can see, installed at the system level
Hard Drive\Users\username1\Applications = applications only that user can see
Hard Drive\Users\username2\Applications = applications only that user can see
In the same way, there are multiple Preferences, Cookies, Application Support, etc. folders at different levels, for the same reasons.
If you do not know what you are doing and you delete one of these folders that "looks like a duplicate" you could cripple some essential part of your system or your account. That is why people are telling you not to do this.
The Shared folder is there because if you are in one user account you are prevented from seeing the files inside other user accounts. (Because you don't want other accounts to be able to see your personal data.) If you want to share files with others in your house using the same Mac, that's a problem. But the Shared folder solves this. if you want some files to be accessible to all users, like some photos or music, just put them in the Shared folder and now anyone with an account on that computer can see those shared files.
The reason shared files are not simply stored at the top level is because everything above the Users folder is supposed to be reserved for the system. User-specific are supposed to stay in the Users folder. That is why they put the Shared folder in there.
If you are not using the Shared folder and are just eyeing it because you want to free up some disk space, well, it probably won't help to delete it. Because if you are not using the Shared folder, it is probably not taking up much space, even though you see stuff in there. And if there is stuff in there taking up space, first figure out if someone put it there for a reason before you delete it.

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

The user and the mailbox are in different Active Directory Sites

Similar Messages

Maybe you are looking for