Stored procedures for read only snapshots

Hi
I have to convert some tables into read only snapshots as per client's requirements,
There are some stored procedures which are based on these tables which basically fetch values from these tables, how do I use these existing procedures so that they can be used even after converting the tables into snapshots ?

>
Sean Byrne wrote:
> I have a calculated date shared variable that I would like to use as a parameter. This date is not contained in the database. The user would put in 12/31/09, and only records that are before this date would show up. I want to use a stored procedure to achieve this result. Does this calculated date have to be written to a table for this to work? The tables are controlled by our ERP on demand vendor, which restricts us from writing anything to their tables. They allow us to use Crystal Reports to retrieve data but no modifications of their tables. One way around this restriction is to create another database on the server to pull data from the ERP database. Any advice would be appreciated? Can I write stored procedures within Crystal Reports?
I think you are just trying to query your database with a date parameter correct? In your case I doubt you want to use a "stored procedure", but a command object that holds a simply sql query. Are you familiar with SQL? When you create your report, you will be asked to select your datasource. Once your database credentials are entered you should see rows that says "Add Command, Tables, Views, etc". Select Add Command and you will be presented with a window in which to enter your SQL command. On the right of that box you will set your parameter. Create your "date" parameter.
Your query will look something like this
Select * from table.table where date <
You can add your dataparam by double clicking it after you created it.
HTH
Chad

Similar Messages

Stored Procedure for Batch Number Format and Block Duplicate Batch Number

Hi Experts !
I am new one in forum asking question.. I want Stored procedure for Batch Number Format. I want fix one Batch number format in Stored Procedure.
Example :
My Batch number format Like BATCH00001 - It should be first five digit is text format and next five is Numeric.
IF create Goods receipt PO or Goods receipt stage I create batch number like BATCH 00001 or any other number means don't add that document and also duplicated batch number also does not allowed. please give me the solutions. I am sorry for my bad english .

Dear Nagarajan K.
                     Thanks for your replay ..
IF @transaction_type IN ('A','U') AND (@object_type = '106' )
BEGIN
set @item = LEFT( @list_of_cols_val_tab_del, CHARINDEX(CHAR(9), @list_of_cols_val_tab_del,1) - 1)
set @batch = substring(@list_of_cols_val_tab_del, len(@item)+1, (CHARINDEX(CHAR(9), @list_of_cols_val_tab_del,len(@item)+2)) - (len(@item)+1))
--set @base =( select basetype from ibt1 where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
set @count = (select count(*) from oibt quantity > 0 and where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
if @count > 1
begin
set @error = 1
set @error_message = 'Please enter different Batch Code for batch ''' + @batch + ''' for item ' + @item
select @error, @error_message
END
END
              I used above Stored Procedure. here we can use one batch number for different item but i want to block one batch we should use one item and one time only after than we never use that batch number for same item and another item.
         After that I want format for Batch, we should follow unique Batch number for all items.

Stored Procedure for Accounts Receivable

Hi. First off, apologies in advance if I have put this question into the wrong topic. Secondly, I first saw SAP 3 weeks ago when I stared my new job and have had no training so please bear with me if some of what I ask doesn't make much sense.
OK, the issue is this. In SAP B1, there is a built in Report called "Customer Receivables Aging" which allows you to see Customer Receivable Accounts by age (e.g 0-30, 31-60, 61-90, 90+) and so on. The problem with the built in report is that it doesn't show all the fields I want - it only shows the Customer Name, balance, and then the aging balances. I want to be able to see things like the customer's contact details, etc. I know this makes no sense because the whole point of the report is to be able to drill down into the different rows, but this report needs to be issued in printed form, hence the need for the extra fields.
Since I can't seen any way from within SAP to change the fields returned by this report, I thought I'd have a stab at writing my own SQL to select out the same data along with the extra fields I wanted. That's when the problems began...try as I might, I cannot get my figures to tally with the SAP Report.
They are almost correct, but not quite. I am sure that I am missing a selection or some other element of the logic that B1 uses to create the built in report.
If you want, I can post the SQL I'm using....I'm not an SQL guru by any means, but I do know my way around it; the biggest problem I have is that I cannot find any documentation as to the 4 letter tables that SAP uses and their relationships except on the most basic level (e.g ORIN is Open Return Invoice [maybe])
Then I thought maybe it might be possible to edit that report section in B1 using the SDK. That would be a better solution as I would not have to 'reinvent the wheel', I can just SELECT an extra field or three to include in the report.
So my question is
->Does anyone have a stored procedure for SQL Server that can replicate correctly the SAP B1 "Customer Receivable Aging", even just the process SAP uses to gather this data would be good.
OR
is it possible to edit this report in SAP to put in the extra fields I want.
Or, am I totally barking up the wrong tree? Thanks in advance, I know this is a long post.

Hi Stephen,
There should be a print layout attached to the on-screen report. This can be altered to show the additional fields you want without resorting to SDK or SQL development.
When you have the Customer Receivables Ageing report open on screen, choose Tools-Print Layout Designer or click on the Print Layout Designer icon on the toolbar. When prompted, choose the layout you wish to edit and you'll be taken to the layout design. In the layout, you can add additional fields and should be able to add most business partner fields. As the report is set to portrait by default, I recommend changing it to landscape so you have lots more space to add the extra fields you want. This report writer is fairly intuitive, if a little basic.
You will need to save this new report design, set it to be the default layout and then when you select to print the Customer Receivables Ageing report (ie Print Preview or Print) you will see the new report.
Hope this helps,
Owen

Stored Procedure For Web Service in Visual Composer 7.1

Hello,
I want to use stored procedure for Webservice in Visual Composer 7.1
I can find this Web service but not supported. ( ex) prcreleased_test - Not supported )
Log.
Message: Error in connection - Can' t execute Web service.
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.processExecution:
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb
Log2
Message: Stopped further execution since the interpreter is unusable
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.XGLInterpreter
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb '
Help me^^ plz..

Hi Tanna.
Thanks for your reply^^
I create webservice that access my stored procedure.
But not supported.
http://dmp.humaxdigital.com/HumaxCmdwService/Service1.asmx?wsdl
There are two service. (Hello World - Test, prcrelease_test - Stored Procedure )
'Hello World' is supported but prcrelease_test is not supported. I can't drag to storyboard.
Our company's DB is MSSQL2005.
please help me^^

Error ora-12028 while creating a read-only snapshot

Hi !
I'm in trouble creating a read-only snapshot of a simple table.
The Master table belongs to an ORACLE 7.3.4 database instance, while the snapshot site belongs to an ORACLE 8.1 database. The read-only snapshot should have a refresh type FAST, but while I'm running the CREATE SNAPSHOT statement in the snapshot site I receive the following message:
"ORA-12028 snapshot type is not supported by master site string
Cause: Pre-Oracle master sites are not able to support primary key or
subquery snapshots that are able to perform a fast refresh.
Action: Create a ROWID snapshot or use a master table from an Oracle8 site. "
This message doesn't help me enough. Is there anyone who can give me an advice ?
Thanks you all.
Laura

Well laura earlier version doesn't support snap shot based on primary key
u should disable primary key constraint from master site
and create snap shot on the basis of row id.
for further detail mail me at [email protected]

Stored Procedure for Crystal Reports

Hi All,
I developed this test stored procedure to see wheather we could a stored procedure for crystal reports. It compiled without any problem, but when I run it, it gives me error message. Here is the stored Procedure..
CREATE OR REPLACE PROCEDURE WOLD1SIM.TEST_PROCEDURE(
TEST_CURSOR IN OUT TEST_PACKAGE.TEST_TYPE,
TEST_PARAMETER IN TEST_TABLE.ID%TYPE)
AS
BEGIN
OPEN TEST_CURSOR FOR
SELECT *
FROM TEST_TABLE
WHERE TEST_TABLE.ID = TEST_PARAMETER;
END TEST_PROCEDURE;
And
This is the error message..
ERROR at line 2:
ORA-06550: line 2, column 1:
PLS-00201: identifier 'TEST_PROC' must be declared
ORA-06550: line 2, column 1:
PL/SQL: Statement ignored
I have created the package sucessfully.
I was wondering If any one of you can advice me where I am making the mistake.
Thank you

CREATE OR REPLACE PROCEDURE WOLD1SIM.TEST_PROCEDURE(TEST_CURSOR IN OUT TEST_PACKAGE.TEST_TYPE,
TEST_PARAMETER IN TEST_TABLE.ID%TYPE)
...you have 2 parameters in your procedure WOLD1SIM.TEST_PROCEDURE(). you should also use two parameters when you execute the procedure.

Stored procedure for arhive

I created a stored procedure for send data from a source bd to the bd destination with a link between BD
But it will not work
CREATE OR REPLACE PROCEDURE archivage ( source IN VARCHAR2, destination IN VARCHAR2)
BEGIN
/ * - Prepare a cursor to select from the bd_source: * /
source_cursor: = dbms_sql.open_cursor;
DBMS_SQL.PARSE (source_cursor,
'SELECT table_name FROM dba_tables' | | source,DBMS_SQL.NATIVE);
LOOP i in source_cursor
/* Or i use this !!!!
SELECT object_name FROM dba_objects WHERE owner = 'SCOTT' AND object_type = 'TABLE'*/
DBMS_SQL.DEFINE_COLUMN (source_cursor, i);
end loop
ignorer: DBMS_SQL.EXECUTE = (source_cursor);
/ * - Prepare a cursor to insert into the destination db: * /
destination_cursor: = DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE (destination_cursor,
'INSERT INTO' | | destination | | DBMS_SQL.NATIVE);
/ * - Fetch a row from the source table and insert it into the destination table: * /
loop
if DBMS_SQL.FETCH_ROWS (source_cursor)> 0 ALORS
- Obtenir des valeurs de colonne de la ligne
DBMS_SQL.COLUMN_VALUE (source_cursor,i);
DBMS_SQL.BIND_VARIABLE (destination_cursor,i);
ignorer: DBMS_SQL.EXECUTE = (destination_cursor);
ELSE
EXIT;
End If;
END LOOP;
/*-Close cursor */
COMMIT;
DBMS_SQL.CLOSE_CURSOR (source_cursor);
DBMS_SQL.CLOSE_CURSOR (destination_cursor);
EXCEPTION
WHEN OTHERS, THEN
if
DBMS_SQL.IS_OPEN (source_cursor)then
DBMS_SQL.CLOSE_CURSOR (source_cursor);
End If;
if DBMS_SQL.IS_OPEN (destination_cursor) then
DBMS_SQL.CLOSE_CURSOR (destination_cursor);
End If;
RAISE;
END;

find 10 differences ... :(
CREATE OR REPLACE PROCEDURE archivage (source        IN VARCHAR2,
                                       destination   IN VARCHAR2)
IS
   source_cursor        INTEGER;
   destination_cursor   INTEGER;
   ignorer              INTEGER;
BEGIN
   /* - Prepare a cursor to select from the bd_source: */
   source_cursor := DBMS_SQL.open_cursor;
   DBMS_SQL.
    PARSE (source_cursor,
           'SELECT table_name FROM dba_tables' || source,
           DBMS_SQL.NATIVE);
   FOR i IN source_cursor
   LOOP
      /* Or i use this !!!!
      SELECT object_name FROM dba_objects WHERE owner = 'SCOTT' AND object_type = 'TABLE'*/
      DBMS_SQL.DEFINE_COLUMN (source_cursor, i);
   END LOOP;
   ignorer := DBMS_SQL.EXECUTE (source_cursor);
   /* - Prepare a cursor to insert into the destination db: */
   destination_cursor := DBMS_SQL.OPEN_CURSOR;
   DBMS_SQL.
    PARSE (destination_cursor,
           'INSERT INTO ' || destination,
           DBMS_SQL.NATIVE);
   /* - Fetch a row from the source table and insert it into the destination table: */
   LOOP
      IF DBMS_SQL.FETCH_ROWS (source_cursor) > 0
      THEN
         --ALORS
         -- Obtenir des valeurs de colonne de la ligne
         DBMS_SQL.COLUMN_VALUE (source_cursor, i);
         DBMS_SQL.BIND_VARIABLE (destination_cursor, i);
         ignorer := DBMS_SQL.EXECUTE (destination_cursor);
      ELSE
         EXIT;
      END IF;
   END LOOP;
   /*-Close cursor */
   COMMIT;
   DBMS_SQL.CLOSE_CURSOR (source_cursor);
   DBMS_SQL.CLOSE_CURSOR (destination_cursor);
EXCEPTION
   WHEN OTHERS
   THEN
      IF DBMS_SQL.IS_OPEN (source_cursor)
      THEN
         DBMS_SQL.CLOSE_CURSOR (source_cursor);
      END IF;
      IF DBMS_SQL.IS_OPEN (destination_cursor)
      THEN
         DBMS_SQL.CLOSE_CURSOR (destination_cursor);
      END IF;
      RAISE;
END;
/

Stored procedure for getting host name, host instance and status of that host is it running or stopped.

Hello all,
yesterday I got one task in that I have to stored procedure for getting host name, host instance and status of that host is it running or stopped.
any body knows where exactly, In which table this details are there in BizTalk databases.
thanks

Status of the host instance is not stored in the SQL database for you to query the status using stored procedure. You have to either use Powershell or WMI to get the status.
In SQL, following table contains the details about the host like Name, LoginName, IsDisables etc but status of the host instance is not stored in the database.
SELECT * FROM BizTalkMgmtDb..adm_HostInstance
Powershell to get the status:
http://axonolympus.nl/?page_id=186&post_id=969&cat_id=6&lang=en
WMI to get the status:
https://msdn.microsoft.com/en-us/library/aa561820.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/aa578621.aspx
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Stored procedure for disabling all foreign key constraints ?

hi all,
I need a stored procedure for disabling / enable all constraints in that database schema.
Create or replace procedure enable_disable_proc(status varchar2(3),schema_name varchar2(20))
---> where 'status' parameter condition should be ( YES for enable) (NO for disable)
---> 'schema_name' is a parameter where ,only this schema should be affected with this procedure..
Thanks in Advance..

Hi,
Try this code
/* Formatted on 2009/07/16 08:15 (Formatter Plus v4.8.8) */
CREATE PROCEDURE enab_disab_proc (
   enforce          IN   VARCHAR2,
   current_schema   IN   VARCHAR2
IS
   v_alter_table_sql   VARCHAR2 (2000);
BEGIN
   FOR rec_con IN (SELECT table_name, constraint_name
                     FROM user_constraints
                    WHERE owner = current_schema)
   LOOP
      IF (enforce = 'NO')
      THEN
         v_alter_table_sql :=
               ' alter table '
            || current_schema
            || '.'
            || rec_con.table_name
            || ' disable constraint '
            || rec_con.constraint_name;
      ELSE
         v_alter_table_sql :=
               ' alter table '
            || current_schema
            || '.'
            || rec_con.table_name
            || ' enable constraint '
            || rec_con.constraint_name;
      END IF;
      EXECUTE IMMEDIATE v_alter_table_sql;
   END LOOP;
END;Edited by: Salim Chelabi on 2009-07-16 05:15

Calling a stored procedure for each row returned

I need to call a stored procedure for each row returned by a repeating frame. I called the stored procedure from the repeating frame format trigger, but that did not work( it did no populated the tables populated by the stored procedure)
How can I call a stored procedure for each row returned by a repeating frame.
Thank you

Include it as a formula column in your data model.

Using a stored procedure for a sender jdbc adapter

Hi all,
The requirement is to use a stored procedure, for extracting data from a oracle database.
Is it possible to do this.
If yes, what should be the source structure in this case.
Please help with the exact soln.
Thanks!!
Younus

Hi,
Did you check the blog pointed by Aamir?
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
You will need to use Oracle Functions instead of Oracle Stored Procedures. Read thru the blog and the note pointed in the blog . Think it is quite a good example.
Regards
Bhavesh

Stored Procedure for Outgoing Payment Approval

Hi
I am writing a stored procedure for Outgoing Payment (Draft) which is not validating my fields
1.Outgoing Draft (Procedure Not Working)
   If @object_type = '140' and @transaction_type = 'A'
   begin
     if exists(select t0.DocEntry from OPDF T0 inner join PDF4 T1 on
     T0.DocNum = T1.DocNum where t1.ObjType ='46' AND (T0.Series = '15' AND T1.OcrCode <> 'U-1')
     and T0.DocEntry = @list_of_cols_val_tab_del)
     begin
          set @error = 1
          set @error_message = 'Check Unit'
     end
   End
Regards
John
Edited by: JohnSmith@B1 on Sep 9, 2011 4:49 PM

John......
Try this.....
IF (@object_type = '140' And (Select ObjType From OPDF
       Where DocEntry = @list_of_cols_val_tab_del)='46'
AND @transaction_type IN ('A'))
BEGIN
if exists(select t0.DocEntry from OPDF T0 inner join PDF4 T1 on
T0.DocNum = T1.DocNum where t1.ObjType ='46' AND (T0.Series = '15' AND T1.OcrCode != 'U-1')
and T0.DocEntry = @list_of_cols_val_tab_del)
begin
select @error = 1,
@error_message = 'Check Unit'
end
End
Above SP will only work when your Series Code is 15 and OcrCode is not equal to 'U-1'....
Please confirm........
And Object type for Payment Draft 140 is right.....
Regards,
Rahul

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

Can a read-only snapshot site be refreshed from a read-only database?

Hi,
Here is the database configuration.
Database 1: master site
Database 2: has materialized views (read-only snapshot site)
If DB1 becomes read-only, is it possible to refresh the materialized views in DB2? I was told that it is not possible because some m$log tables in DB1 need to be updated when the DB2 is refreshed . If it is DB1 is read-only, the meta data tables can not be updated so the refresh will fail.
Does anybody have experience with a scenario like this?
Thanks very much.

Why do you need to put the database in read only mode anyway. Why not control "readability" through security, ie roles. Then it won't really matter.

Enter event not triggering for read-only checkbox

I have some objects in a form that get "locked" when the user signs the form. I'm not using the digital signatures. Instead, when the user types their name into the signature text field, a script runs on the change event that makes all of the fields in the form read only. It also unlocks the fields if the signature is deleted.
I was worried that we would get a lot of phone calls with users that didn't understand that the form had locked ("Why doesn't this form work?!"), so I added some code to the enter event for all of the fields that would pop up a messagebox to explain to people trying to edit a signed form that the form was locked and that they would need to delete the signature to edit the form.
This plan works perfect for my text fields and decimal fields. It does NOT work at all for my checkboxes. For some reason, the enter event is never triggered for read-only checkboxes. I don't see any other events that would obviously work for me though. Any ideas?
Thanks

Thanks, those are reasonable suggestions.
In the first suggestion, I'm unclear about one aspect of how I would accomplish this. I assume I would allow people to modify fields in the form, but that when they did, a msgbox would pop up that would inform them that, if they continued with this modification to a signed form, the signature would be removed. I'm all good to that point. But if they answered that they do not want to continue modifying that field and removing the signature, how can I code it to set the value back to what it was before the change? Is there some method that will give me access to the value of the field BEFORE the attempted modification? I went looking for something like $.previousvalue, but found nothing.
I'd suggest that I could use a two-stage solution, in which I store the previous value on the enter event, and save it just in case they do not want to change the field when prompted by the msgbox, but since the enter event does not exist for checkboxes (my original problem), that seems like it won't work.
As far as radio button suggestion, I like radio buttons very much except for one fatal flaw: they aren't (as far as I can tell) clearable. That is a shame. Clearly some people (like me) want both exclusivity AND clearability. And we'd like the controls to have an enter event. But I know I'm demanding Anyway, as it is, I just end up having to use checkboxes and create a boatload of silly code to make them exclusive.
Emily

Stored procedures for read only snapshots

Similar Messages

Maybe you are looking for