Storm 2 Issues - Locks up and Calls echo
My phone tends to lock up when trying to view messages, text, email or even applications. The other issue is that when I place a call about 75% of the time it says connected when I call, but all I hear is my voice echoing back to me.
The phone is reset every night and it is updated to the latest OS.
Anyone else having this issue?
Android10 wrote:
Try doing a soft reset on the device.
To do a soft rest, power the device off, then remove and replace the battery.
Then could I get you to power the phone back on, then dial *228 send and option 1 on the device, then afterwards dial *228 send and option 2.
Next you would want to make sure that you are removing old information like emails and messages that you no longer need. By removing old messages and emails you would free up memory on the device to make it perform better.
A soft reset or .228 will probably not correct this. Sounds like the original poster is using OS .713 on the Storm 2. It has known problems with the "robotic voice problem" that Verizon is aware of.
Similar Messages
-
Issue with Deploying and calling a BPEL process on ALBPM enterprise server
Hi,
I am trying to put in place a POC using Aqualogic BEA products (using ALBPM 5.7, Enterprise Server 5.7, ALSB 2.6, Weblogic App server 9.2). My goal is to put in place a simple BPEL process (using ALBPM) which would call a webservice exposed through ALSB. This BPEL process is initiated by a wrapper BPMN process calling the BPEL process through fuego code.
Though we are able to do the above on a standalone ALBPM studio, When we try to deploy the exported BPM project on the enterprise server and access it through the hiper workspace portal we are getting the following error in the BPM Process Administrator Log of the Engine.
A component failed while executing activity '/Process#Default-1.0/Global' (BP-method Global). Details: The task could not be successfully executed. Reason: 'fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. '. Caused by: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. fuego.lang.ComponentExecutionException: The task could not be successfully executed. Reason: 'fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. '. at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:916) at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1068) at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:389) at fuego.server.execution.GlobalTaskExecution.invoke(GlobalTaskExecution.java:106) at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:481) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:655) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:616) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:442) at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:164) at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:142) at fuego.server.execution.Global.execute(Global.java:81) at fuego.server.AbstractProcessBean$38.execute(AbstractProcessBean.java:2496) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:290) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:462) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:540) at fuego.transaction.TransactionAction.start(TransactionAction.java:213) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:117) at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66) at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2491) at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:386) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl.runGlobalActivity(EJBProcessControlAdapter_hu750h_EOImpl.java:2877) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174) at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335) at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl_921_WLStub.runGlobalActivity(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:48) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:111) at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:66) at $Proxy77.runGlobalActivity(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1478) at fuego.lang.JavaObject.invoke(JavaObject.java:185) at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:200) at fuego.portal.wapi.InteractiveExecution.process(InteractiveExecution.java:157) at fuego.portal.wapi.WebInteractiveExecution.process(WebInteractiveExecution.java:54) at fuego.portal.wapi.InteractiveExecution.process(InteractiveExecution.java:200) at fuego.portal.servlet.ExecutionDispatcher.runGlobalActivity(ExecutionDispatcher.java:659) at fuego.portal.servlet.ExecutionDispatcher.processRequest(ExecutionDispatcher.java:144) at fuego.portal.servlet.ExecutionDispatcher.doPost(ExecutionDispatcher.java:105) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at fuego.portal.servlet.AuthenticatedWamServlet.service(AuthenticatedWamServlet.java:1049) at fuego.portal.servlet.SingleThreadPerSession.service(SingleThreadPerSession.java:73) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at fuego.servlet.multipart.BaseMultipartFilter.doFilter(BaseMultipartFilter.java:57) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3243) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:181) Caused by: fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. at fuego.connector.ConnectorException.connectorNotFound(ConnectorException.java:55) at fuego.connector.ConnectorService.getConnectorInterface(ConnectorService.java:586) at fuego.connector.ConnectorTransaction.getConnectorInterface(ConnectorTransaction.java:618) at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:254) at fuego.soaptype.WSConfiguration.getInstance(WSConfiguration.java:55) at fuego.soaptype.Endpoint.create(Endpoint.java:42) at fuego.soaptype.WebServiceInstantiator.instantiate(WebServiceInstantiator.java:58) at fuego.component.Component.instantiateDynamic(Component.java:123) at CapGemini.Process.Default_1_0.Instance.CIL_callBPEL(Instance.java:241) at CapGemini.Process.Default_1_0.Instance.CIL_callBPEL(Instance.java:307) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:907) ... 64 more
Two things here that might help to understand the problem better :
1) As I understand the error is due to some issue while calling the BPEL process from the Fuego code.
The Fuego code which call's the BPEL from the BPMN process is as follows :
helloResponse as String = "someoutput"
helloRequest as String = "someinput"
sessionid as String
// Starting a Session.
// In case you are testing this in the Studio,
// the password must be the same as the user
startSession BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using user = "test",
password = "test"
returning sessionid = result
// createTest is the name of the operation
// in the exposed process.
// In this case the process "ExposedProcess"
// has a web service operation
// called "createTest" that is a "Process Creation" type
// and uses the Begin activity's argument set
callHello BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using sessionId = sessionid,
arg1 = helloRequest
returning helloResponse = result
// Closing the session
discardSession BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using sessionId = sessionid
display "The BPEL's response : " + helloResponse
2) Further, I had catalogued the BPEL's wsdl to the location http://localhost:9000/fuegoServices/ws/ProcessServiceListener?WSDL while running the same in Studio, but while deploying on the enterprise server , I made this point to http://localhost:7001/fuegoServices/ws/ProcessServiceListener?WSDL Is this correct ?
Any thought on this issue would be appreciated.
Regards
DeepakHi Deepak,
We are also facing a similar problem, while accessing an external webservice from a BPM process.
Were you able to resolve this issue.
If so, Could you please let us know the procedure that you followed to resolve the issue.
Thanks in Advance,
Krishnaveni. -
Issues with IFrame and calling an application outside the IFrame
Hi
I have an issue which is really turning my head 360 degrees in a "dead loop":)
I have a WebDynpro application, one component and three views in a viewset.
The first view will always be placed in column one and depending on some action the two other views should be loaded one by one. So in the main view the users will select three parameters from three dropdownboxes and then a call with the given parameters to an html file in KM - which then again is passing the parameters to a swf file which is presenting an Business Objects dashboard. The BO Dashboard is presented in an iFrame.
The users selects an element in the Dashboard and is then again calling the webdynpro application with four parameters, the three first from the dropdownboxes, but also a new one which is used to call the third view. I am using NavigationTarget in the URL to load the application at the given position in the portal. And the logic is working, BUT the portal is presented in the IFram of the first View.
So my question is - How to navigate from the IFrame and "back into the portal"????
Regards
Kay-ArneThere was an issue with the serialization file created.
Creating a new serilaization file via AAMEE and running it resolved the issue.
Create a serialization file via AAMEE: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
And then run it via command line.
Here are the steps:
AdobeSerialization (serialization file created using AAMEE 3.1) is not a double clickable file. You need to run it via command line to serialize the products. the command line is -
AdobeSerialization --tool=VolumeSerialize --stream --provfile=”Absolute_Path_of_prov.xml”
where
--tool=VolumeSerialize: specifies that the tool needs to process the prov.xml file to serialize.
--provfile” specifies the absolute file path to the prov.xml file,
By default, the tool looks for the prov.xml file in the same directory as the executable file and so
typically you do not need to specify this option. (Specify this option only if the prov.xml file is in some
other location.)
Make sure you invoke command prompt with Admin privileges. Return code of zero means success.
Tiffany can you please confirm the same?
-Pragya -
Screen issues, locking up and what else?
Anyone having issues with their screens? My i4 sort of cuts off the letters at the top or bottom when I scroll through the applications or when I go to contacts. It also freezes and drops my call entirely even when I am holding it the Apple way.
Anyone having similar issues? Like mine? I am aware of the yellow bands but I am not inquiring about that. I want to know if I am the only one with a trash phone.Hey there Packattackjw,
It sounds like you are experiencing lots of unexpected issues with your iPhone 5. Apps quitting or closing on their own sound like software issues to me, but the flashing lines/blotches could be that, or hardware. I would start by quitting all the running apps on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, I would test the issue after backing up and restoring your phone as a new device, to see if these issues persist:
iOS: How to back up your data and set up your device as a new device
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Creating parameters dynamically and calling a procedure but strange issue
Okay I have the following program that is calling a procedure(data_compare_utility)[pasted below] and data_compare_table_setup table definition and data(isert scripts) are pasted below :
DECLARE
--FP_OLD_TABLE VARCHAR2(200);
--FP_NEW_TABLE VARCHAR2(200);
--FP_DATA_COMPARE_ID NUMBER(10) := 1;
--FP_RESTRICTION_CLAUSE VARCHAR2(500) := 'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')';
--FP_RESTRICTION_CLAUSE_4_INS VARCHAR2(500) := 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')';
cursor c_data_compare_table_setup
is
select table_name, old_schema_name, new_schema_name, data_compare_id, restriction_clause, restriction_clause_ins from DATA_COMPARE_TABLE_SETUP;
r_of_data_compare_table_setup c_data_compare_table_setup%rowtype;
Lv_args_4_data_compare_utility varchar2(500);
BEGIN
--FP_OLD_TABLE := 'BIAPPS_11.RAHUL_EMPLOYEES';
--FP_NEW_TABLE := 'RAHULKALRA.RAHUL_EMPLOYEES';
open c_data_compare_table_setup;
Loop
fetch c_data_compare_table_setup into r_of_data_compare_table_setup;
exit when c_data_compare_table_setup%NOTFOUND;
--exec RAHULKALRA.P_COMPARE_DATA_UTILITY
Lv_args_4_data_compare_utility := ''''||r_of_data_compare_table_setup.OLD_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','''||r_of_data_compare_table_setup.NEW_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','||r_of_data_compare_table_setup.DATA_COMPARE_ID||','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE||''','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE_INS||'''';
P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
commit;
End Loop;
dbms_output.put_line('rahul');
dbms_output.put_line(''''||r_of_data_compare_table_setup.OLD_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','''||r_of_data_compare_table_setup.NEW_SCHEMA_NAME||'.'||r_of_data_compare_table_setup.TABLE_NAME||''','||r_of_data_compare_table_setup.DATA_COMPARE_ID||','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE||''','''||r_of_data_compare_table_setup.RESTRICTION_CLAUSE_INS||'''');
--P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
--P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
close c_data_compare_table_setup;
END;
Procedure : compare_data_utility:
CREATE OR REPLACE procedure RAHULKALRA.p_compare_data_utility(fp1_old_table in varchar2, fp2_new_table in varchar2, fp3_data_compare_id in number, fp4_restriction_clause in varchar2, fp5_recrtiction_clause_4_ins in varchar2)
as
Lv_common_column_names varchar2(2000);
Lv_primary_column_name varchar2(50);
Lv_insert_data_compare_log varchar2(2000);
--Lv_counter number(10);
Lv_row_id_for_data_compare_log number(10);
Lv_old_table_record_count number(10);
Lv_old_table_rec_cnt_query varchar2(200);
Lv_new_table_record_count number(10);
Lv_new_table_rec_cnt_query varchar2(200);
begin
select max(row_id) into Lv_row_id_for_data_compare_log from data_compare_log;
Lv_old_table_rec_cnt_query := 'Select count(*) from '||fp1_old_table||' '||fp4_restriction_clause;
dbms_output.put_line(Lv_old_table_rec_cnt_query);
execute immediate Lv_old_table_rec_cnt_query into Lv_old_table_record_count;
Lv_new_table_rec_cnt_query := 'Select count(*) from '||fp2_new_table||' '||fp4_restriction_clause;
execute immediate Lv_new_table_rec_cnt_query into Lv_new_table_record_count;
dbms_output.put_line(fp5_recrtiction_clause_4_ins);
if (Lv_row_id_for_data_compare_log is null)
then
Lv_row_id_for_data_compare_log := 1;
else
Lv_row_id_for_data_compare_log := Lv_row_id_for_data_compare_log + 1;
end if;
Lv_insert_data_compare_log := 'insert into data_compare_log values('||Lv_row_id_for_data_compare_log||',''comparing data for '||fp1_old_table||' and '||fp2_new_table||''','''||fp1_old_table||''','''||fp2_new_table||''',TO_DATE('''||to_char(sysdate,'DD-MON-YY HH24:MI:SS')||''',''DD-MON-YY HH24:MI:SS''),'||fp3_data_compare_id||','||Lv_old_table_record_count||','''||'Select count(*) from '||fp1_old_table||' '||fp5_recrtiction_clause_4_ins||''','||Lv_new_table_record_count||','''||'Select count(*) from '||fp2_new_table||' '||fp5_recrtiction_clause_4_ins||''')';
dbms_output.put_line(Lv_insert_data_compare_log);
execute immediate Lv_insert_data_compare_log;
commit;
-- tested : dbms_output.put_line(Lv_insert_data_compare_log);
Lv_common_column_names := f_fetch_common_column_names(fp1_old_table,fp2_new_table,fp3_data_compare_id);
-- tested : dbms_output.put_line(Lv_common_column_names);
Lv_primary_column_name := f_extract_pkey_column_names(fp1_old_table, fp2_new_table);
dbms_output.put_line(Lv_primary_column_name);
p_compare_data(fp1_old_table,fp2_new_table,Lv_common_column_names,Lv_primary_column_name,fp4_restriction_clause,fp3_data_compare_id);
end;
CREATE TABLE RAHULKALRA.DATA_COMPARE_TABLE_SETUP
TABLE_ID NUMBER(10),
TABLE_NAME VARCHAR2(100 BYTE),
OLD_SCHEMA_NAME VARCHAR2(100 BYTE),
NEW_SCHEMA_NAME VARCHAR2(100 BYTE),
RESTRICTION_CLAUSE VARCHAR2(500 BYTE),
RESTRICTION_CLAUSE_INS VARCHAR2(500 BYTE),
DATA_COMPARE_ID NUMBER(10)
Insert into DATA_COMPARE_TABLE_SETUP
(TABLE_NAME, OLD_SCHEMA_NAME, NEW_SCHEMA_NAME, DATA_COMPARE_ID, RESTRICTION_CLAUSE, RESTRICTION_CLAUSE_INS)
Values
('W_CHNL_TYPE_D', 'BIAPPS_11', 'RAHULKALRA', 1, 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')', 'WHERE W_INSERT_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''') OR W_UPDATE_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''')');
Insert into DATA_COMPARE_TABLE_SETUP
(TABLE_NAME, OLD_SCHEMA_NAME, NEW_SCHEMA_NAME, DATA_COMPARE_ID, RESTRICTION_CLAUSE, RESTRICTION_CLAUSE_INS)
Values
('RAHUL_EMPLOYEES', 'BIAPPS_11', 'RAHULKALRA', 1, 'WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')', 'WHERE W_INSERT_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''') OR W_UPDATE_DT >= TO_DATE(''''''''01/JAN/2012'''''''',''''''''DD/MON/YYYY'''''''')');
I am facing the following error for this command when I call P_compre_data_utility procedure from my anonymous block:
P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility); -- the error is pasted below
if I do a dbms_output.put_line(Lv_args_4_data_compare_utility) and then copy paste its output and call P_COMPARE_DATA_UTILITY, the procedure is getting executed, here is that command :
P_COMPARE_DATA_UTILITY('BIAPPS_11.RAHUL_EMPLOYEES','RAHULKALRA.RAHUL_EMPLOYEES',1,'WHERE W_INSERT_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'') OR W_UPDATE_DT >= TO_DATE(''01/JAN/2012'',''DD/MON/YYYY'')','WHERE W_INSERT_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''') OR W_UPDATE_DT >= TO_DATE(''''01/JAN/2012'''',''''DD/MON/YYYY'''')');
Error:
ORA-06550: line 27, column 7:
PLS-00306: wrong number or types of arguments in call to 'P_COMPARE_DATA_UTILITY'
ORA-06550: line 27, column 7:
PL/SQL: Statement ignored
Question : just want to know whats wrong with : P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
please help me.
Regards
RahulMac_Freak_Rahul wrote:
Hi All,
I am really sorry, my head is so aching since I am not a regular plsql coder and to save my life I need to write this code for data comparison between 2 tables .. further sorry about calling p_data_compare utility stupidly : P_COMPARE_DATA_UTILITY(Lv_args_4_data_compare_utility);
I am calling it now using :
execute immediate 'exec P_COMPARE_DATA_UTILITY('||Lv_args_4_data_compare_utility||')';If you are sure the call works then, exec would not work since it is a SQLPLUS command.
try
execute immediate 'BEGIN P_COMPARE_DATA_UTILITY(''||Lv_args_4_data_compare_utility||''); END;';
PS: I can manually give table names to my utility , just need 60 tables to compare but would be great if I can work it out this eay.
2) I can sound very stupid since my head is aching I am not a regular plsql coder but from now on I would be one, please helpJust for your sake, to Compare 60 tables (Supposing you just want to verify count of records), you are writing an entire procedure; You might have completed this activity by now doing the manual way. By taking this way, you are investing time to generate a correct code (as you just mentioned not being a regular plsql developer) you are stuck with some un-identifiable issues.
As an alternate way, I would suggest you to export the data, after ordering, into a spreadsheet and then validate. Also, since it looks like you are comparing the data in the same database between schemas, you can also use the SQL Navigators Data Compare utility and there are many more readily available in market.
I would wish you the best if you still prefer taking the approach. -
I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??
Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
My phone bill is paid and I can't send or receive msgs and I tried to call Rogers but that doesn't even work and if it was a bill issue I could still call Rogers think it might be software but I would like to know what to do
I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night
Turn off Voice Control.
Otherwise, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). -
I have mu phone set up on locked screen and passcode. I want to take this off. I am unable to receive calls in locked screen.
I need to hear all my incoming calls.Double check settings - do not disturb - is off.
-
DW CS3 locked files and FTP issues - cannot update pages
I just upgraded to Dreamweaver CS3 and now cant seem to
update any of my web pages. I can connect to the server etc and see
my files locally & remotely but when I try check out a file to
update it I get an error message saying 'index.html is a locked
file and can be viewed but not changed'. All I can do with it is
view it. When I try to unlock any files locally nothing happens????
This was not an issue before I upgraded.....I have checked my
FTP details with a version on my pc and there are exactly the
same.....does anyone know is this an issue with mac version of
Dreamweaver CS3?
Help!!!Can you post a link to your child or template page and tell
us what you have
changed that didn't propagate?
Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done). If
you *have
done this*, then recreate the child pages (in DWCS3) using
FILE | New > Page
from Template, select the template and click CREATE.
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
By the way, this is not an official communication vehicle to
Adobe. We are
all just volunteers and peers here.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"gwbusiness" <[email protected]> wrote in
message
news:[email protected]...
> Hi honeybugs,
>
> I am having the same problem and I need a global fix so
that I can
> immediately
> update my site . . . did Adobe help you? This did not
happen immediately
> to my
> files but my template does not now update pages . . . I
am desparate.
>
> Thank you,
>
> Gail
> -
Hi all,
I was very happy with my iPhone and the 2.2 software update, things were running nicely and I hadn't had any troubles, which is why I decided to go ahead and install the 2.2.1 update when it was released - and I have had nothing but trouble...
I live in an area where Vodafone coverage is not great, there are however certain areas where I can go to get almost full reception; this was the first problem that I noticed - I no longer get full reception here, it's now two or sometimes three bars.
The second problem I have is when I go to make a phone call, when the call is establishing it now takes sometimes up to 40 seconds of silence to get to the ringtone! With 2.2 it almost seemed instantaneous, and now there is this massive delay which is infinitely infuriating!
I think this second issue may be linked with the third, which is pretty much the opposite. When I end a call there is another long delay, though not normally as long as the setup delay - 15-20 seconds. Pressing the home button takes me back to the home screen with the green bar at the top saying the call is in progress, pressing the green bar takes me back to the call and allows me to press the end call button again, to no avail. All this whilst the call timer is still counting.
The last issue is with the calls itself... Now when I make a call, about 50% of the time it will drop out in the first 30 seconds of the call, I will not get a call failed message (which I had seen a couple of times in the past); it will just sit there like the person on the other end of the phone has gone silent and the call timer will still be incrementing. This coupled with the call end and redial delays make for an almost 1 minute round trip from the call dropping out to me calling back - this is extremely infuriating!
Now, I thought I could just roll back to the 2.2 update when everything was peachy... How wrong I was; it appears that the baseband has been altered in such a way with the 2.2.1 update that the 2.2 update cannot be restored to the phone, I've even gone to the lengths of jailbreaking the phone only to realise that the baseband cannot be rolled back, even if the firmware is.
So, this puts me in a situation where I have an infuriating phone to use because I cannot roll back to the last known good update for it - it was reasons like these call issues that I moved away from Windows Mobile and Symbion devices. My iPhone was great until this update - I just want it back to good working order!
I've tried restoring the phone, rebooting the phone, restoring to a 2.2 release (gives a #1013 error when trying to update it). Is there any way I can get this back - or is there a 2.2.2 release planned that will solve any of these issues?
Cheers,
--ryanHave you done a reset (hold the sleep/wake & home button until the Apple logo appears)? A reset will often correct many issues you may have with the phone.
If a reset or restore does not correct the issues, you could try a new SIM from ATT or make an appointment at the Genius Bar to have the phone looked at.
This is a user to user forum. No one here knows when or what the next update will contain. -
no sound in my iphone 4s. I can make calls but no ring tone or lock sound and siri also doesnt talk. My sound settings are ok and it is not in silent mode. Please help
Reset, restore, stop trolling.
-
Xml is not well formed and caller ID issues
XML is not well formed happens when i click on links from facebook mobile...links to youtube videos, or any other external links. This used to work before, just started happening out of nowhere.
Also, caller ID doesnt display names from contacts, just the number they are calling from...1-10 calls will show the contact name.
any information would be great, thank you!Since you have a "BlackBerry Browser" I'm assuming you're on a BES? Have you talked with your IT department? Is the device locked when the caller ID doesn't work? Do you have content protection enabled?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
i have an older flip phone (CDM8945 DIG ) and somehow it is locked for outgoing calls? how can i unlock it? lost the original manuel. thanks,
LOCK
Locks your phone and prevents unauthorized use.
Phone can only be used after inputting the password.
1. To lock the phone, press and hold
2. To unlock the phone, press (phone button)
then input the password.
Lock feature will deactivate when the phone is
powered off. Upon next power up, you will need to
press
to lock phone again.
The default password is the last 4 digits of your
phone number
See this link for text with pictures of buttons included:
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html?page=16#manual
Here is a link to the whole manual (model 8940 but close enough)
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html
Maybe you are looking for
-
Placed PDF missing text after re-exporting to PDF
I'm using OSX 10.6 with InDesign CS3 504. When I place PDFs into an InDesign file, and then PDF that InDesign file, some of the PDFs are missing text. All text boxes have been made from the same original text box, just modified for content, and shap
-
The problem about MouseListener,MouseMotionListener
When I compile my program I face a problem with the compiled informatioin: XYZApp.java:137: DisplayPanel should be declared abstract; it does not define mouseDragged(java.awt.event.MouseEvent) in DisplayPanel class DisplayPanel extends JPanel impleme
-
How many characters can be in filenames
There seems to be a difference in how the MAC and PC handle filename length in our photo department. Is there a maximum character length for filenames. Where does one find out this kind of information?
-
I am going to get my replacement 790fx-gd70 tomorrow Wednesday. After get everything installed(hardware) I was thinking updating the Bios. Originally I saw the 1.9, now I see 1.A. Should go with this new version? If so then let me get the install pro
-
Hello: Suppose I have this code: class BigClass class MyThread extends Thread @Override public void run() inst.DoSomethingLocal(); inst.DoSomethingGlobal(); int globalvar=0; public int /*synchronize