Story Not Allowing Inserts
On any new Script I am writing Story will not allow me to insert any of the commands, no shot type, character, etc. When I right click the options are grayed out, and nothing happens when doing any of the hotkeys. My old scripts work but not my new ones. How can I fix this?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Similar Messages
-
Do not allow insert update or delete of records
hii
i have a status field which when set to X should not allow any dml on that record (ie should disable those records whose status field is X )
how do i do it ?
plzz help me
mandarHii
i did the following in the pre_record trigger
if (:candidates.status='T')then
--set_block_property('candidates',insert_allowed,property_false);
set_block_property('candidates',update_allowed,property_false);
set_block_property('candidates',delete_allowed,property_false);
else
--set_block_property('candidates',insert_allowed,property_true);
set_block_property('candidates',update_allowed,property_true);
set_block_property('candidates',delete_allowed,property_true);
end if;
is there any problem with this code
(it is working fine for me ?
what is the difference if i write it in when new record instance ?
plzz help me
mandar -
Character palette does not allow insert
In the character palette, I can select every glyph. I can examine every character, Roman or not. However, the Insert button is always grayed out. This appears to be application-independent. It worked fine in 10.4.3.
I'm sure there is some plist file I must delete, but I'm not sure which one. Any ideas?I have reinstalled two of
the applications in which this happens, to no avail.
If it is application-specific, that would have taken
care of it.
Not necessarily. I think there are some apps, including AppleWorks, that it just does not work with now, so you have to use the keyboard for special characters (or a replacement like PopChar). I doubt reinstalling the OS is going to fix these app specific issues. -
Hi im new to all of this and so going at my own pace, i quite literate at sql for making tables and inserting data from a live website but i used a different product. The trouble i am having with this product is that when i log into either Admin or HR account when i build a table in SQL or even through the application area it displays my table but im unable to insert data into it through SQL as it says "cannot create a column here" even tho im inserting straight into the stated columns. Im just wondering if i have missed something in settings or i need to use a specified file path to point to where the data is saved.
Also im wondering if this produce will allow me to connect this database to my personal small website in which to hold login information and details to post to also?
Thanks for any help much appreciated.What SQL are using to insert your data?
You should be using a statement similar to:
INSERT INTO <Table_Name> (<Column_1>, <Column_2>, ...) VALUES (<Value_1>, <Value_2>, ...);
Replacing the <> with appropriate values.
Regards,
David -
Imac optical drive will not allow disc insertion. (blocked)
Hello out there.
I have a 2009 27" imac (intel) with an optiarc disc drive. After installing an update a year or so ago, the disc drive started making cycling type noises at startup, and would occasionally not allow insertion of a disc. Then it would accept a disc only rarely, and recently not at all. The disc will only go in about a third of the way, then is physically blocked.
I want to run the Apple hardware test on my startup disc, but that's obviously a problem since I can't insert it.
If anyone can offer guidence, it would be greatly appreciated!
Thanks, jakeonbellIt may be broken or you might just need to do a PRAM reset 2-3 times. Instructions for the reset are in Intel iMac SMC and PRAM resets
-
Constraint on a Date Column to Not Allow Setting Weekend Dates
We are utilizing SQL Server 2008 R2 for scheduling AD user migrations. We keep track of all user accounts to be migrated and have a column for Migration_DATE with data type "Date".
I am looking to add a constraint to the Migration_DATE column to not allow scheduling dates on weekends. In other words I don't want anyone setting dates that fall on the weekend or a list of dates on a table. Can anyone help me with how to do this
or point me in the right direction.
Thanks much!Hello,
Based on your description, you had a table which used for track AD user migration. And you wan to alter the date column "Migration_DATE" to not allow insert weekend date. If I understanding correctly, you can add a constraint to check the insert values.
ALTER TABLE teble_name ADD constraint ck_Migration_date
CHECK (DATENAME(WEEKDAY,Migration_DATE) NOT IN ('Saturday','Sunday'))
Reference:Creating and Modifying CHECK Constraints
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
MaxDB: Table with many LONG fields does not allow an INSERT: ...?
Hi,
I have a table with many LONG fields (28). So far, everythings works fine.
However, if I add another LONG field I cannot insert a dataset anymore
(29 LONG fields).
Does there exist a MaxDB parameter or anything else I can change to make inserts possible again?
Thanks in advance
Michael
appendix:
- Create and Insert command and error message
- MaxDB version and its parameters
Create and Insert command and error message
CREATE TABLE "DBA"."AZ_Z_TEST02"
"ZTB_ID" Integer NOT NULL,
"ZTB_NAMEOFREPORT" Char (400) ASCII DEFAULT '',
"ZTB_LONG_COMMENT" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_00" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_01" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_02" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_03" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_04" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_05" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_06" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_07" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_08" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_09" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_10" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_11" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_12" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_13" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_14" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_15" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_16" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_17" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_18" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_19" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_20" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_21" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_22" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_23" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_24" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_25" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_26" LONG ASCII DEFAULT '',
PRIMARY KEY ("ZTB_ID")
The insert command
INSERT INTO AZ_Z_TEST02 SET ztb_id = 87
works fine. If I add the LONG field
"ZTB_LONG_TEXTBLOCK_27" LONG ASCII DEFAULT '',
the following error occurs:
Auto Commit: On, SQL Mode: Internal, Isolation Level: Committed
General error;-7032 POS(1) SQL statement not allowed for column of data type LONG
INSERT INTO AZ_Z_TEST02 SET ztb_id = 88
MaxDB version and its parameters
All db params given by
dbmcli -d myDB -u dbm,dbm param_directgetall > maxdb_params.txt
are
KERNELVERSION KERNEL 7.5.0 BUILD 026-123-094-430
INSTANCE_TYPE OLTP
MCOD NO
RESTART_SHUTDOWN MANUAL
SERVERDBFOR_SAP YES
_UNICODE NO
DEFAULT_CODE ASCII
DATE_TIME_FORMAT INTERNAL
CONTROLUSERID DBM
CONTROLPASSWORD
MAXLOGVOLUMES 10
MAXDATAVOLUMES 11
LOG_VOLUME_NAME_001 LOG_001
LOG_VOLUME_TYPE_001 F
LOG_VOLUME_SIZE_001 64000
DATA_VOLUME_NAME_0001 DAT_0001
DATA_VOLUME_TYPE_0001 F
DATA_VOLUME_SIZE_0001 64000
DATA_VOLUME_MODE_0001 NORMAL
DATA_VOLUME_GROUPS 1
LOG_BACKUP_TO_PIPE NO
MAXBACKUPDEVS 2
BACKUP_BLOCK_CNT 8
LOG_MIRRORED NO
MAXVOLUMES 22
MULTIO_BLOCK_CNT 4
DELAYLOGWRITER 0
LOG_IO_QUEUE 50
RESTARTTIME 600
MAXCPU 1
MAXUSERTASKS 50
TRANSRGNS 8
TABRGNS 8
OMSREGIONS 0
OMSRGNS 25
OMS_HEAP_LIMIT 0
OMS_HEAP_COUNT 1
OMS_HEAP_BLOCKSIZE 10000
OMS_HEAP_THRESHOLD 100
OMS_VERS_THRESHOLD 2097152
HEAP_CHECK_LEVEL 0
ROWRGNS 8
MINSERVER_DESC 16
MAXSERVERTASKS 20
_MAXTRANS 288
MAXLOCKS 2880
LOCKSUPPLY_BLOCK 100
DEADLOCK_DETECTION 4
SESSION_TIMEOUT 900
OMS_STREAM_TIMEOUT 30
REQUEST_TIMEOUT 5000
USEASYNC_IO YES
IOPROCSPER_DEV 1
IOPROCSFOR_PRIO 1
USEIOPROCS_ONLY NO
IOPROCSSWITCH 2
LRU_FOR_SCAN NO
PAGESIZE 8192
PACKETSIZE 36864
MINREPLYSIZE 4096
MBLOCKDATA_SIZE 32768
MBLOCKQUAL_SIZE 16384
MBLOCKSTACK_SIZE 16384
MBLOCKSTRAT_SIZE 8192
WORKSTACKSIZE 16384
WORKDATASIZE 8192
CATCACHE_MINSIZE 262144
CAT_CACHE_SUPPLY 1632
INIT_ALLOCATORSIZE 229376
ALLOW_MULTIPLE_SERVERTASK_UKTS NO
TASKCLUSTER01 tw;al;ut;2000sv,100bup;10ev,10gc;
TASKCLUSTER02 ti,100dw;30000us;
TASKCLUSTER03 compress
MPRGN_QUEUE YES
MPRGN_DIRTY_READ NO
MPRGN_BUSY_WAIT NO
MPDISP_LOOPS 1
MPDISP_PRIO NO
XP_MP_RGN_LOOP 0
MP_RGN_LOOP 0
MPRGN_PRIO NO
MAXRGN_REQUEST 300
PRIOBASE_U2U 100
PRIOBASE_IOC 80
PRIOBASE_RAV 80
PRIOBASE_REX 40
PRIOBASE_COM 10
PRIOFACTOR 80
DELAYCOMMIT NO
SVP1_CONV_FLUSH NO
MAXGARBAGECOLL 0
MAXTASKSTACK 1024
MAX_SERVERTASK_STACK 100
MAX_SPECIALTASK_STACK 100
DWIO_AREA_SIZE 50
DWIO_AREA_FLUSH 50
FBM_VOLUME_COMPRESSION 50
FBM_VOLUME_BALANCE 10
FBMLOW_IO_RATE 10
CACHE_SIZE 10000
DWLRU_TAIL_FLUSH 25
XP_DATA_CACHE_RGNS 0
DATACACHE_RGNS 8
XP_CONVERTER_REGIONS 0
CONVERTER_REGIONS 8
XP_MAXPAGER 0
MAXPAGER 11
SEQUENCE_CACHE 1
IDXFILELIST_SIZE 2048
SERVERDESC_CACHE 73
SERVERCMD_CACHE 21
VOLUMENO_BIT_COUNT 8
OPTIM_MAX_MERGE 500
OPTIM_INV_ONLY YES
OPTIM_CACHE NO
OPTIM_JOIN_FETCH 0
JOIN_SEARCH_LEVEL 0
JOIN_MAXTAB_LEVEL4 16
JOIN_MAXTAB_LEVEL9 5
READAHEADBLOBS 25
RUNDIRECTORY E:\_mp\u_v_dbs\EVERW_C5
_KERNELDIAGFILE knldiag
KERNELDIAGSIZE 800
_EVENTFILE knldiag.evt
_EVENTSIZE 0
_MAXEVENTTASKS 1
_MAXEVENTS 100
_KERNELTRACEFILE knltrace
TRACE_PAGES_TI 2
TRACE_PAGES_GC 0
TRACE_PAGES_LW 5
TRACE_PAGES_PG 3
TRACE_PAGES_US 10
TRACE_PAGES_UT 5
TRACE_PAGES_SV 5
TRACE_PAGES_EV 2
TRACE_PAGES_BUP 0
KERNELTRACESIZE 648
EXTERNAL_DUMP_REQUEST NO
AKDUMP_ALLOWED YES
_KERNELDUMPFILE knldump
_RTEDUMPFILE rtedump
UTILITYPROTFILE dbm.utl
UTILITY_PROTSIZE 100
BACKUPHISTFILE dbm.knl
BACKUPMED_DEF dbm.mdf
MAXMESSAGE_FILES 0
EVENTALIVE_CYCLE 0
_SHAREDDYNDATA 10280
_SHAREDDYNPOOL 3607
USE_MEM_ENHANCE NO
MEM_ENHANCE_LIMIT 0
__PARAM_CHANGED___ 0
__PARAM_VERIFIED__ 2008-05-13 13:47:17
DIAG_HISTORY_NUM 2
DIAG_HISTORY_PATH E:\_mp\u_v_dbs\EVERW_C5\DIAGHISTORY
DIAGSEM 1
SHOW_MAX_STACK_USE NO
LOG_SEGMENT_SIZE 21333
SUPPRESS_CORE YES
FORMATTING_MODE PARALLEL
FORMAT_DATAVOLUME YES
HIRES_TIMER_TYPE CPU
LOAD_BALANCING_CHK 0
LOAD_BALANCING_DIF 10
LOAD_BALANCING_EQ 5
HS_STORAGE_DLL libhsscopy
HS_SYNC_INTERVAL 50
USE_OPEN_DIRECT NO
SYMBOL_DEMANGLING NO
EXPAND_COM_TRACE NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC YES
OPTIMIZE_JOIN_PARALLEL_SERVERS 0
OPTIMIZE_JOIN_OPERATOR_SORT YES
OPTIMIZE_JOIN_OUTER YES
JOIN_OPERATOR_IMPLEMENTATION IMPROVED
JOIN_TABLEBUFFER 128
OPTIMIZE_FETCH_REVERSE YES
SET_VOLUME_LOCK YES
SHAREDSQL NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT 1500
SHAREDSQL_COMMANDCACHESIZE 32768
MEMORY_ALLOCATION_LIMIT 0
USE_SYSTEM_PAGE_CACHE YES
USE_COROUTINES YES
MIN_RETENTION_TIME 60
MAX_RETENTION_TIME 480
MAX_SINGLE_HASHTABLE_SIZE 512
MAX_HASHTABLE_MEMORY 5120
HASHED_RESULTSET NO
HASHED_RESULTSET_CACHESIZE 262144
AUTO_RECREATE_BAD_INDEXES NO
LOCAL_REDO_LOG_BUFFER_SIZE 0
FORBID_LOAD_BALANCING NO>
Lars Breddemann wrote:
> Hi Michael,
>
> this really looks like one of those "Find-the-5-errors-in-the-picture" riddles to me.
> Really.
>
> Ok, first to your question: this seems to be a bug - I could reproduce it with my 7.5. Build 48.
> Anyhow, when I use
>
> insert into "AZ_Z_TEST02" values (87,'','','','','','','','','','','','','','','',''
> ,'','','','','','','','','','','','','','','','')
>
> it works fine.
It solves my problem. Thanks a lot. -- I hardly can believe that this is all needed to solve the bug. This may be the reason why I have not given it a try.
>
Since explicitely specifying all values for an insert is a good idea anyhow (you can see directly, what value the new tupel will have), you may want to change your code to this.
>
> Now to the other errors:
> - 28 Long values per row?
> What the heck is wrong with the data design here?
> Honestly, you can save data up to 2 GB in a BLOB/CLOB.
> Currently, your data design allows 56 GB per row.
> Moreover 26 of those columns seems to belong together originally - why do you split them up at all?
>
> - The "ZTB_NAMEOFREPORT" looks like something the users see -
> still there is no unique constraint preventing that you get 10000 of reports with the same name...
You are right. This table looks a bit strange. The story behind it is: Each crystal report in the application has a few textblocks which are the same for all the e.g. persons the e.g. letter is created for. Principally, the textblocks could be directy added to the crystal report. However, as it is often the case, these textblocks may change once in a while. Thus, I put the texts of the textblock into this "strange" db table (one row for each report, one field for each textblock, the name of the report is given by "ztb_nameofreport"). And the application offers a menue by which these textblocks can be changed. Of course, the fields in the table could be of type CHAR, but LONG has the advantage that I do not have to think about the length of the field, since sometime the texts are short and sometimes they are really long.
(These texts would blow up the sql select command of the crystal report very much if they were integrated into the this select command. Thus it is realized in another way: the texts are read before the crystal report is loaded, then the texts are "given" to the crystal report (by its parameters), and finally the crystal report is loaded.)
>
- MaxDB 7.5 Build 26 ?? Where have you been the last years?
> Really - download the 7.6.03 Version [here|https://www.sdn.sap.com/irj/sdn/maxdb-downloads] from SDN and upgrade.
> With 7.6. I was not able to reproduce your issue at all.
The customer still has Win98 clients. MaxDB odbc driver 7.5.00.26 does not work for them. I got the hint to use odbc driver 7.3 (see [lists.mysql.com/maxdb/25667|lists.mysql.com/maxdb/25667]). Do MaxDB 7.6 and odbc driver 7.3 work together?
All Win98 clients may be replaced by WinXP clients in the near future. Then, an upgrade may be reasonable.
>
- Are you really putting your data into the DBA schema? Don't do that, ever.
> DBM/SUPERDBA (the sysdba-schemas) are reserved for the MaxDB system tables.
> Create a user/schema for your application data and put your tables into that.
>
> KR Lars
In the first MaxDB version I used, schemas were not available. I haven't changed it afterwards. Is there an easy way to "move an existing table into a new schema"?
Michael -
I am experiencing issue with my SharePoint site , when I am trying to add new Item in List . Error given below :--> 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace
level override to 0; resetting correlation to e2e9cddc-cf35-4bf8-b4f3-021dc91642da c66c2c17-faaf-4ff9-a414-303aa4b4726b e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 Document Management Server Document Management 52od
Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/sites/00003/Lists/PM%20Project%20Status/NewForm.aspx?RootFolder=&IsDlg=1]. Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3)
level for this list. e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.17 w3wp.exe (0x1B94) 0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Starting correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.17 w3wp.exe (0x1B94)
0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Ending correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.31 w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High System.Data.SqlClient.SqlException: Cannot insert
the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls. INSERT fails. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavi... e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015
08:23:36.31* w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High ...or runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior,Are you trying to setup P2P? Could you explain the process you followed completely? By anychance you create the backup and then created the publication?
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
When i try to download an update from the appstore the dropdown menju automatically inserts my apple id (which is wrong). It's in gray and will not allow me to type in the correct id. How do i stop the auto insert so that i can enter the correct id?
the original apple id was entered incorrectly. Apple says it must be a email address. My email address is correct but the letter ( t ) somehow got added to the (.com) so that when i try to enter my id it is automaticly loaded with the email address the ends ( .comt ) . According to Apple this is not a "legal" email id. But it appears on my dropdown in gray and i cannot alter it or delete it, thus preventing me from downloading software updates.
-
ORA-01733- virtual column not allowed here - Insert using inline view
Does anyone know why I am getting ORA-01733- virtual column not allowed here
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
---no error without WITH CHECK option
SQL> INSERT INTO
2 (SELECT
3 location_id,
4 city,
5 l.country_id
6 FROM countries c, locations l,regions r
7 where l.country_id = c.country_id
8 and r.region_id=c.region_id
9 and r.region_name = 'Asia')
10 VALUES (5500, 'Wansdworth Common', 'UK');
1 row created.
SQL> rollback;
Rollback complete.
-----error with WITH CHECK OPTION
SQL> INSERT INTO
2 (SELECT
3 location_id,
4 city,
5 l.country_id
6 FROM countries c, locations l,regions r
7 where l.country_id = c.country_id
8 and r.region_id=c.region_id
9 and r.region_name = 'Asia' WITH CHECK OPTION)
10 VALUES (5500, 'Wansdworth Common', 'UK');
INSERT INTO
ERROR at line 1:
ORA-01733: virtual column not allowed here
I was expecting
ORA-01402: view WITH CHECK OPTION where-clause violation
for the second one. Is there anything I am missing here ?Randolf
Thank you very much for the update to this old question
After reading the link I think I should ignore this error and accept it as ORA-01402
The information you asked me to check did not lead me an understanding of different error types.
SQL> ----view for ORA-01733
SQL> create view test_v_1
2 as
3 SELECT
4 location_id,
5 city,
6 l.country_id
7 FROM countries c, locations l,regions r
8 where l.country_id = c.country_id
9 and r.region_id=c.region_id
10 and r.region_name = 'Asia' WITH CHECK OPTION;
View created.
SQL>
SQL>
SQL>
SQL> select * from user_updatable_columns where table_name='TEST_V_1';
OWNER TABLE_NAME COLUMN_NAME UPD INS DEL
HR TEST_V_1 CITY YES YES YES
HR TEST_V_1 COUNTRY_ID NO NO NO
HR TEST_V_1 LOCATION_ID YES YES YES
SQL>
SQL> ----view for ORA-01402
SQL>
SQL> create view test_v_2
2 as
3 SELECT
4 d.department_id,
5 d.department_name,
6 d.location_id
7 FROM hr.departments d,hr.locations l
8 WHERE l.location_id=d.location_id
9 and d.location_id < 2000
10 WITH CHECK OPTION;
View created.
SQL>
SQL> select * from user_updatable_columns where table_name='TEST_V_2';
OWNER TABLE_NAME COLUMN_NAME UPD INS DEL
HR TEST_V_2 DEPARTMENT_ID YES YES YES
HR TEST_V_2 DEPARTMENT_NAME YES YES YES
HR TEST_V_2 LOCATION_ID NO NO NO
SQL>
SQL>
SQL> ----INSERT STILL FAILING WITH DIFFERENT ERROR DESPITE THE SAME UPDATABLE COLUMN STRUCTURE
SQL> insert into test_v_1 values (5500, 'Wansdworth Common', 'UK');
insert into test_v_1 values (5500, 'Wansdworth Common', 'UK')
ERROR at line 1:
ORA-01733: virtual column not allowed here
SQL> insert into test_v_2 values (9999, 'Entertainment', 2500);
insert into test_v_2 values (9999, 'Entertainment', 2500)
ERROR at line 1:
ORA-01402: view WITH CHECK OPTION where-clause violation
SQL>A. Coskan GUNDOGAR
Oracle DBA
http://coskan.wordpress.com
“A man's errors are his portals of discovery.”
James Joyce -
Adobe Acrobat 7: Can not insert pages, changing the document: Not Allowed, but Security Method set t
In Adobe 7, I need to add some pdf pages to the end of a document, but the insert pages (as well as all other items under Document> are greyed out.
On the document properties\ Security> the document restrictions summary says "Changing the Document: Not Allowed", but the Security Method in the drop down above is set to "No Security"
Thanks!If there are form fields, then whoever added them probably used the forms menu, not the Acrobat form fields. Thus the PDF was converted to Designer and you are out of luck. The FORMS button found in various places in Acrobat 7 and latter takes you to Designer, not the Acrobat form tools. The latter are located in the tools menu.
-
I accidentally selected "do note allow" Pages access to my photos. Now I can't insert photos. Message says go to settings and select Privacy - but there is no such option in the Settings. Help! I want to be able to insert images in documents I create in the Pages app.
Ok - I figured it out myself as soon as I posted this question. I went to my IPad settings - not the Settings in the Pages app. Problem fixed.
-
Sorry, your Story Free subscription does not allow access to this application. Please upgrade your s
I started using Story a few months ago. While writing a script (very proud of it's potential) I was past page 20 I believe, to my own demise I only backed it up around page 9 using a word document. My Hard Drive died and had to be replaced. While trying to save all my files before I took it to the apple store I went to grab my adobe story file and couldnt. So, I tried to log in and got this "Sorry, your Story Free subscription does not allow access to this application. Please upgrade your subscription." I went to the online-version and my story was not there. Thus, I am very angry that I lost my script because out of the blue my subscription no longer allowed me to use Adobe Story on my Macbook Pro.
Nevertheless, I have been unsuccessfully trying to re-open Adobe Story on my newly restored HD and I still get the same message.
If you could help me with what needs to be done, that would be swell.
Thanks.Yup I was working on my script on Adobe Story, without problems, I was
unable to retrieve the file to save it. My Hard Drive has since been
erased and now I am working on a new HD.
I did re-install CS6. All my other Adobe programs work. The online
version of Story seems to work but every time I sign in using my Adobe ID
it gives me that message. :/ The thing is I never had a subscription so im
quite confused why it's telling me my subscription no longer allows me to
use Story without upgrading and spending oodles of money.
Thanks!
Harriett McFarlane -
Hi :
In My application there is table called baseline_effort where it contains Projects and Objects
what i need is If project and object is already in the database if i try to reenter the same project it must show some message saying database already exist and it must not allow to reenter the same project
how to query this can any one suggest
Thnx
SudhirBest way is to create a unique key constraint on the table.
Search the internet for "oracle unique key" for more information on this subject.
Rene -
The inserted SD card will not allow me to upload or delete from it. Also with other SD cards
I have placed multiple SD cards in to the SD slot of my iMac and all are unlocked (enabled to be edited). Every single one does not allow me to add documents or delete documents from them. I am starting to think this is an iMac issue. Please help
Hi, in Finder, do a Get Info on them, what rights do you have?
Maybe you are looking for
-
Transfer credit from one apple id to another?
my husband has two apple id's (don't ask , please) he has $50 credit from an itunes gift card on the old id. how can we get that from there to his new id to use? wanted to try to gift it - but it seems to default to the credit card on file vs the a
-
Hi, How is the operation mapping of PI 7.1 different from the interface mapping of PI 7.0? Thanks, regards, Ramya Shenoy
-
Custom Page Sizes doesn't work
I have set up a few custom page sizes but when I try to used them, it doesn't work. Well once in blue moon it does. I can't find a consistent way that it does. I have read all the online help and followed the process to the letter, but when I select
-
hi Experts Can Any One have SAP PI 7.1 Thank You praveen.tecnics at g m a i l . c o m Praveen G Edited by: praveen.tecnics on Mar 18, 2009 8:29 PM Edited by: praveen.tecnics on Mar 18, 2009 8:29 PM Edited by: praveen.tecnics on Mar 18, 2009 8:32 P
-
What is the S-Video cable (equivalent to PC) that would run from my Mac to the TV? I would like to run movies on my Mac and watch them on my TV