STOs and Productions order are not lined up. Dates are off

Hi Experts
I have a production order and STO with different dates. I would expect no gap between Prod order and the STO. I have checked Planned delivery time,GR/GI at both supplying and receiving plant . Everything looks fine. Please Advice

Ganpath,
In general, both of those objects are executables. In most applications, the relationship between the dates of STOs and the dates of Production Orders is not directly determined by the software, It is only through careful design and execution of the overall process that you achieve dates that line up; assuming, of course, that is your business requirement (not everyone wants dates to line up).
So, it depends upon how these two objects were created. Can you please describe how they were created?
Best Regards,
DB49

Similar Messages

Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON

Hi All
I m getting one error 'Account 'Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON. I know we have to maintain accounts using Tcode-AO85 but
1) how to know the correct Account Determination.
2) How to know the correct G/Ls to be maintained in AO85.
Pls advice.
Thnx in advance.
Regards
Pankaj

Hi,
In ABZON, if you are acquiring with existing asset then you cna have access to account determination / asset class from asset master. If you are also creating new asset then you will have access to asset class.
In OAYZ, we assign account determination to asset class. and in AO85, we asign GL account to account determination.
Hope this will help you.
Thanks,

Table for STO and Production Order

Hello Experts,
I would like to know in which table I can find a relation between STO and his related Production Order.
Thanks in advance.
Regards
Mayur

Sorry!! I've selected wrong forum.

Account 'Acquisition:Acquis. and production costs' could not be found for a

dear all
when i am posting periodic asset postings through ASKB below error is comming ple help
Account 'Acquisition:Acquis. and production costs' could not be found for area 90
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Acquisition:Acquis. and production costs' in depreciation area 90 for company code SCIL.
Procedure
Enter this account in the account determination for Asset Accounting.
thanks

Dear bikkina.prakash
please check were you properly maintained the AO90 for GLs for Depreciation
also check whether you changed any depreciation key in asset master(means previously you run depreciation. by mistakenly any body changed)
Regards
shankar

Process orders and Production orders??

Hi,
In our case Process orders are used in most of the case ,than production orders. Pls tell wheather Process orders are also pulled by the extractors(2LIS_04_PEARBPL,2LIS_04_PECOMP
,2LIS_04_PEMATNR,2LIS_04_P_ARBPL,2LIS_04_P_COMP,
2LIS_04_P_MATNR) and behave similar in all the Standard PP reports. and what is the diffrence between Process orders and Production order??
Regards
Nair

hi,
both are similar but varies with industries.
Process order- used in chemical industries- involves process like heating, melting etc.
Production order- used in car industries- assembling, drilling process
Assign Points if useful
Ramesh

Diference between STO and Shipment order?

Hi All ,
There are two plants , one is manufacturing and other is sales . In sales plant sales order is created and after MRP run Purchase requisition is created(for getting materisl from production plant) . In me59 we convert this Preq to shipment order.
1)Can oyu please tell me whant is diference between STO and shipment order?
2) Can you tell me what is the configuration to avoid creation of shipment order and system will only create the STO from Preq after executing Me59?
Thanks
Rohit Chavan

Hi Chavan,
Starting with "Shipmnt Order" definition => (from SAP Help):
   An order to a transportation service provider to ship goods from a shipper to a single consignee with agreed terms and conditions. The corresponding confirmation from the transportation service provider is also part of the business object.
   You can use this business object to subcontract the transportation of goods from a shipper to a single consignee if you cannot fulfill a shipment request yourself or if you regularly subcontract transportation services.
   You can also use this business object in the process of transportation service provider selection and tendering. The aim of both processes is to assign a suitable transportation service provider (TSP) to a shipment order.
http://help.sap.com/saphelp_tm60/helpdata/en/66/dda98bb6b64c30b925f031bb0a2023/content.htm
STO is just Stock Transport Order => functionality to move stock from one plant to another plant in two steps( inclidung GI in the sending plant and GR in the receiving plant).
Usuall documnt flow in the STO process => PO(UB or NB order type), delivery, GI -> GR (done via migo for example).
I believe that you can avoid cration of the Shipmnt order via correct selection on ME59 screen. Just something what is characteristic for STO and not for Shipmnt Orders.
Best Regadrs,
Tomek.

How to identify the emergency orders in STO and Sales Order

Hi,
kindly let us know is there any field in header details of STO and Sales Order where we can identify the emergency orders,
In our STO Process we are creating more STO's from one warehouse to one Store,but in that orders we have some of the orders are emergency order's.
Note:-if we create new order type then we can deference the orders but as per the business requirement we need to give same order type.
Thanks & Regards,
Murali.M
+91-9321526563.

Thanks

Class for Purchase order item components and Production order components

I'm looking for a some classes.   I'm very new to objects, so I could be searching for them incorrectly.
The first class I'm looking for is a purchase order class that contains the item components. I've looked at CL_PO_ITEM_HANDLE_MM and CL_PO_HEADER_HANDLE_MM. I couldn't find components as a part of either of the classes.
The second one I'm looking for is not as critical. It is for the components for a production order.   I have a function module: BAPI_PRODORD_GET_DETAIL that gets the components for the order. However, to take advantage of objects - I read somewhere - that if possible I should avoid calling a function module.
Any help that you could give would be greatly appreciated.
Thank you!
Michelle

Hello Michelle
I do not think there are already classes available on ERP 6.0 for reading production order (yet I might be wrong...). However, regarding purchase order you are already on the right track.
*& Report ZUS_SDN_OO_READ_PO
*& Thread: Class for Purchase order item components and Production order components
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1206523"></a>
"& NOTE: Coding adapted from BAPI_PO_GETDETAIL1
REPORT zus_sdn_oo_read_po.
TYPE-POOLS: abap, mmpur.
PARAMETER:
p_ebeln   TYPE ebeln DEFAULT '3000000045'.
DATA: gs_document    TYPE mepo_document,
      go_po          TYPE REF TO cl_po_header_handle_mm,
      gs_header      TYPE mepoheader,
      gd_tcode       TYPE sy-tcode,
      gd_result      TYPE mmpur_bool.
data: gt_items       type PURCHASE_ORDER_ITEMS,
      gs_itm         type PURCHASE_ORDER_ITEM,
      gs_item        type mepoitem.
START-OF-SELECTION.
* prepare creation of PO instance
gs_document-doc_type    = 'F'.
gs_document-process     = mmpur_po_process.
gs_document-trtyp       = 'A'. " anz. => display
gs_document-doc_key(10) = p_ebeln.
* object creation and initialization
** l_ebeln = purchaseorder.
CREATE OBJECT go_po.
CALL METHOD go_po->po_initialize( im_document = gs_document ).
CALL METHOD go_po->set_po_number( im_po_number = p_ebeln ).
CALL METHOD go_po->set_state( cl_po_header_handle_mm=>c_available ).
* read purchase order from database
gd_tcode = 'ME23N'.
CALL METHOD go_po->po_read
    EXPORTING
      im_tcode     = gd_tcode
      im_trtyp     = gs_document-trtyp
      im_aktyp     = gs_document-trtyp
      im_po_number = p_ebeln
      im_document = gs_document
    IMPORTING
      ex_result    = gd_result.
* there was a problem in reading the PO
IF ( gd_result EQ mmpur_no ).
**    l_messages = l_handler->get_list_for_bapi( ).
**    PERFORM return TABLES l_messages return
**                          poitem poschedule poaccount.
**    CALL METHOD l_po->po_close( ).
ELSE.
    gs_header = go_po->if_purchase_order_mm~get_data( ).
    WRITE: / gs_header-ebeln,
             gs_header-bukrs,
             gs_header-bsart,
             gs_header-lifnr.
ENDIF.
gt_items = go_po->if_purchase_order_mm~get_items( ).
LOOP AT gt_items INTO gs_itm.
    gs_item = gs_itm-item->get_data( ).
    write: / gs_item-ebelp,
             gs_item-matnr,
             gs_item-menge.
ENDLOOP.
END-OF-SELECTION.
Regards
Uwe

Scheduling of planned order and Production order

Dear PP gurus,
I have run MRP , after running MRP, system has created planned order. These planned order dates are schedule by the system in 2015....I am not able to understand. how? . When i double click on
planned order order and try to convert it in production order those dates get copied into production order.
DO i need to change the dates thr? or keep the same dates which the system is giving>
I m going wrong somewhere. please tell me where and   what is config for scheduling for planned order and production order?
Please tell me step by step procedure
Regards
Edited by: Aadi1981 on Apr 1, 2010 9:02 AM

Thanks for replying,
I have done the below setting for shceduling. Kindly check and let me know any setting needs ot be changed or incorect
FOr scheduling production order , i have configured below settings in OPU3
In OPU3 ,
Detail scheduling tab
Scheduling and Generate cap req tab is checked.
then
adjust scheduling , adjust dates tab,    : adjust basic dates , adjust dep , reqt to operation date is selected
scheduling type is backward.,
Automatic scheduling tab is checked.
In OPU5
Scheduling of PLanned order
Scheduling and Generate cap req box is checked (selected)
Adjust scheduling
Sheduling level: via detail scheduling
adjust dates:     adjust basc dates , adjust dep reqt , req to operation dates
For capacity scheduling ; always basic dates, dep reqts to operation dates
scheduling type ; backwards
apart from this do i need to do update ca96/ ca97?
best Regards
Edited by: Aadi1981 on Apr 3, 2010 7:42 AM

Find Planned and Production Orders

Hi all ,
I have a requirement . If i give the Work center Name i should get already assigned Planned Orders or Open Production Order against that Work center .
Please let me know . If there is no standard FM then let me know can i retrieve those from any tables .
I appreciate for any suggestions .
Regards
Raj

Hello Raj
Please note that your "objective" (Find planned and Production Orders) has little to do with object orientation.
Function module BAPI_ALM_ORDEROPER_GET_LIST is probably the one you are looking for. You need to feed TABLES parameter IT_RANGES with the appropriate values.
Please note that the selection parameters have special names that can be found in the structures defined in fm IBAPI_ALM_ORDEROPER_GETLIST:
* set some local constants:
constants:
    lc_progname like rsvar-report value 'RIAFVC20',
    lc_par_int type ddobjname value 'IBAPI_ORDER_LISTOPER_PARAMS',
    lc_par_ext type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_PARAMS',
    lc_sel_int type ddobjname value 'IBAPI_ORDER_LISTOPER_SELOPS',
    lc_sel_ext type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_SELOPS'.
Example: If you want to select for a specific work center then I assume the selection parameter is:
(BAPI_ALM_ORDER_LISTOPER_SELOPS-) OPTIONS_FOR_WORK_CNTR
Thus, to select for a given work center add the following record to IT_RANGES:
FIELDNAME = 'OPTIONS_FOR_WORK_CNTR'   " presumably without the DDIC structure name
SIGN = 'I'
OPTION = 'EQ'
LOW = <work center>
If the selection does not work then just do a little debugging.
Regards
Uwe

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

Open planned orders and production orders

Hi friends,
I have one issue with my client.
Client has 1 lac materials in sap .Now he wants extract all materials open planned orders and open production orders with quantity and dates.
Please tell me the process how i can extract the data from sap for above requirement.
Thanks,
Manoj

Hi Manoj,
For open planned order and production order select the respective box.
But one suggestion. Try to convince client that this report will take a lot of time as you have mentioned 1 lac materials are there.
You can exclude system status and get it with below screen as mentioned already.
But my suggestion is to run the report at night when the system load is very less. Please create a background job one for planned order and another for production order. Then run it in midnight as per the customer requirement in background. You can automate the process by sending automatic mail to customer. Please refer the below link to trigger mail.
Mail Trigger with TEXT file via JOB run
Regards,
Krishnendu.

How to compare sale order bom and production order bom.

i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

Hi,
Check Tcode:CS14 to SD/PP BOM's
Chidambaram

Different CUOBJ between sales order item and production order

Hi gurus,
Our SAP solution is IS Mill & Variant configuration based, we're using ECC6 as OLTP system mapped to APO PP/DS from which module we trigger the planned order into production order conversion. We're exclusively using the 2 different production type : MTO & MTS. When Sales order based (MTO), it was not possible so far to change the configuration of the production order since following Message no. CO661 was advising the data for the configuration was taken from the allocated SO:
Here is an old thread we'd posted where we were requesting further details about above message: Message CO 661 - Characteristics values were copied - you can only display
We recently upgraded SP level (SAP_BASIS) from 15 to 30 on ECC6 side, SAP Basis Component on SCM side has been remaining unchanged with release 700 level 016.
We now observe the message is unexpectively NOT raising anymore so-that the configuration can be freely adjusted; reason seem to be a different CUOBJ between the SO and its production order; please not the issue do not take place when creating the production order directly from ECC6 through CO08.
Would you please help to clarify the reason of such a behaviour? Thanks in advance.
Remark: snote 1326891 has been patched but w/o any added value as it do not really apply (= CTP not used)
BR,
Pascal.

UP
Below as an illustration CUOBJ from VBAP versus CUOBJ from AFPO
Both WO have been created from APO, difference is the first one was created prior our SP level upgrade. I have to admitt CUOBJ mechanism between ECC & APO is quite unclear, below CUOBJ found when reading planned order data with FM /SAPAPO/RRP_LC_ORDER_GET_DATA (reading executed prior conversion, same outcome when reading prior its creation)
BR,
Pascal.

AIAB - Account Acquisition:Acquis. and production costs could not be found

Hi Guys,
I want to doing Settle Asset Under Construction with AIAB,
when i doing Process distribution rules with target Asset on time-dependent it's Cost Center, it's no problem and success
but if i doing Process distributin rules with target Asset on time-dependent is Internal Order, so i can't process and show error message : Account 'Acquisition:Acquis. and production costs' could not be found
so can any body give me the solution, where is the problem ??
Thank's
Best Regards
Ferry

Hi,
In AO90, check for the Account 'Acquisition:Acquis. and production costs' .
Then for the GL account check the field status group. May be Cost center might be mandatory.
Regards,
Sridevi

STOs and Productions order are not lined up. Dates are off

Similar Messages

Maybe you are looking for