Find Planned and Production Orders

Hi all ,
I have a requirement . If i give the Work center Name i should get already assigned Planned Orders or Open Production Order against that Work center .
Please let me know . If there is no standard FM then let me know can i retrieve those from any tables .
I appreciate for any suggestions .
Regards
Raj

Hello Raj
Please note that your "objective" (Find planned and Production Orders) has little to do with object orientation.
Function module BAPI_ALM_ORDEROPER_GET_LIST is probably the one you are looking for. You need to feed TABLES parameter IT_RANGES with the appropriate values.
Please note that the selection parameters have special names that can be found in the structures defined in fm IBAPI_ALM_ORDEROPER_GETLIST:
* set some local constants:
  constants:
    lc_progname like rsvar-report value 'RIAFVC20',
    lc_par_int  type ddobjname value 'IBAPI_ORDER_LISTOPER_PARAMS',
    lc_par_ext  type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_PARAMS',
    lc_sel_int  type ddobjname value 'IBAPI_ORDER_LISTOPER_SELOPS',
    lc_sel_ext  type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_SELOPS'.
Example: If you want to select for a specific work center then I assume the selection parameter is:
(BAPI_ALM_ORDER_LISTOPER_SELOPS-) OPTIONS_FOR_WORK_CNTR
Thus, to select for a given work center add the following record to IT_RANGES:
FIELDNAME = 'OPTIONS_FOR_WORK_CNTR'   " presumably without the DDIC structure name
SIGN = 'I'
OPTION = 'EQ'
LOW = <work center>
If the selection does not work then just do a little debugging.
Regards
  Uwe

Similar Messages

  • Planned and production order

    Hi,
    what is meant by planned and production order?
    I have to list planned order,production order and stocks that are cancelled or rejected?
    How to do that?
    ASAP
    thanx,
    sudha

    Hi,
    A planned order is sent to a plant and is an MRP request for the procurement of a particular material at a determined time. It specifies when the inward material movement should be made and the quantity of material that is expected.
    It can be changed or deleted at any time (exceptions: planned orders for direct production and for direct procurement).
    Planned orders are converted into production orders for in-house production and into purchase requisitions for external procurement.
    In contrast to planned orders, production orders and purchase requisitions are fixed receipt elements, which commit to the procurement.
    By means of table,
    Planned order is : PLAF-PLNUM ;
    and Production Order is AFKO-AUFNR .
    You can trace the relationship by using tcode : MD13 ( PlOrder) and MD4C (PrOrder).
    Rgds,
    TS Winedya

  • How to find workcenter and production order change log

    Hi,
    I am new to PP function.
    Due to problem tracking, I want to know where to find the change logs for
    1.Work Center
    2.Production Order
    Many thanks!
    Steven

    Hello Steven,
    to view change log for production order:
    1. you can go to CO03 at the header functions choose GOTO --- CHANGE MANAGEMENT (here you can see if in the order there where Change process been done to the order)
    2. Also in CO03 at the header functions choose HEADER --- STATUS CHANGES (with this you can track the user, system status changes, the action done, date, time, user,transaction happen on the production order.
    to view change log for work center:
    1. go to CR03 choose EXTRAS --- ADMINISTRATIVE DATA (here you can track the date and who made the changes ans status of the work center)
    2. you can also check table CRHD which you can see detailed of the work center you wish to see.
    Thanks

  • Open planned orders and production orders

    Hi friends,
    I have one issue with my client.
    Client has 1 lac materials in sap .Now he wants extract all materials open planned orders and open production orders with quantity and dates.
    Please tell me the process how i can extract the data from sap for above requirement.
    Thanks,
    Manoj

    Hi Manoj,
    For open planned order and production order select the respective box.
    But one suggestion. Try to convince client that this report will take a lot of time as you have mentioned 1 lac materials are there.
    You can exclude system status and get it with below screen as mentioned already.
    But my suggestion is to run the report at night when the system load is very less. Please create a background job one for planned order and another for production order. Then run it in midnight as per the customer requirement in background. You can automate the process by sending automatic mail to customer. Please refer the below link to trigger mail.
    Mail Trigger with TEXT file via JOB run
    Regards,
    Krishnendu.

  • How BOM and routing is selected for Planned order and Production order?

    Hi,
    Can any1 plz tell me how BOM and routing is selected for a planned order and production order. ?

    Hello Mathisuthan,
    BOM and Routing selection for the planned order and production order through production version, If u have more than one BOM and more than one Routing then u can maintain this information as Production Version in the system.
    Production version you maintained
    MM01/MM02 -- MRP4--- Production version
    Or you can create Production Versions in Mass also with Transaction Code "C223"
    In the case no production version maintained/created  for the material, then system by default  will pick the first BOM and routing.
    I hope this information helpful to you.
    Regards
    Umesh Mali

  • Scheduling of planned order and Production order

    Dear PP gurus,
    I have run MRP , after running MRP, system has created planned order. These planned order dates are  schedule by the system in 2015....I am not able to understand. how? . When i  double click on
    planned order order and try to convert it in production order  those dates get copied into production order.
    DO i need to change the dates thr? or  keep the same dates  which the system is giving>
    I  m going wrong somewhere. please tell me where and   what is config for scheduling for planned order and production order?
    Please tell me step by step procedure
    Regards
    Edited by: Aadi1981 on Apr 1, 2010 9:02 AM

    Thanks for replying,
    I have done the below setting for shceduling. Kindly check and let me know any setting needs ot be changed or incorect
    FOr scheduling  production order , i have configured below settings in OPU3
    In OPU3 ,  
    Detail scheduling tab
    Scheduling and  Generate cap req tab is checked.
    then
    adjust scheduling , adjust dates  tab,    :  adjust basic dates , adjust  dep , reqt to operation date  is selected
    scheduling type is backward.,
    Automatic scheduling tab is  checked.
    In OPU5
    Scheduling of PLanned order
    Scheduling and  Generate cap req box  is checked  (selected)
    Adjust scheduling
    Sheduling level: via  detail  scheduling
    adjust dates:     adjust basc dates , adjust  dep reqt , req to  operation dates
    For capacity  scheduling ;  always  basic dates, dep reqts to operation dates
    scheduling type ; backwards
    apart from this do i need to do update  ca96/ ca97?
    best Regards
    Edited by: Aadi1981 on Apr 3, 2010 7:42 AM

  • Link between Purchase Order and Production Order

    Hi,
    Could some one tell me how i could get a relation ship between Purchase order and Production Order after a Good receipt is done. Coz after a GR is done I am not able to see the production order for a particular material in MD04 transaction.
    Thanks,
    Arul.

    Hi Arul ,
    i think u may not get the LINK b/w Production Order and PO , Bcos--->
    check the process --->
    RUN MRP , here System will generate the Production Plan and PRs( based on the avail.of that Raw Material).So PO will be generated by PRs.So I think there is no link b/w Production and Purchase .
    this is based on the my system settings and my knowledge.
    Regards
    Prabhu

  • Varaince settlement and costing sheet in REM and Production order

    for REM, repetetive manufacturing, what's the difference between REM and production order in terms of variance settlement and settlement profile design? what's the difference between process order and production order in terms of variance settlement and settlement profile design?
    for actual overhead(fixed and variable), can it be calculated automatically by costing sheet? user is very angry to input actual overhead by jounal entry. also how about plan scrap, how to define it in configuration? besides order confirmation, where can I input actual scrap?

    For variances, there is no difference between the 3 diferrent orders. The settlement profile can also be the same.  The real difference from a CO perspective concerns the calculation of WIP and the settlement rule.  Process orders and production orders normally use a full settlement rule (though periodic settlement is also possible) and WIP is calculated based on actual cost.  Repetitive orders only use periodic settlement and WIP is valued at target cost.
    From an overhead perspective, there is no difference between the 3 types of orders.  Overhead sheets are assigned through the costing variant and costs are applied through period-end process. 
    Plan scrap is maintained in master data, either in material master, routing (receipe for process orders), or bill of material.  Acttual scrap usually happens based on the quantity of components issued to the order during confirmation or by the amount of scrap reported during confirmation.  If you are backflushing components, as you normally would do for repetitive, then you can adjusted the consumed quantities by doing an additional goods issue to the order (movement type 261).
    thanks,

  • List of Sales order and production order

    I need the list of sales order and production order for the period 01.04.2006 to 31.12.2006

    Dear Nau,
    VA05 for list of sales orders and put Document date in Sales Order Data
    COIO Process order information System
    Regards,
    Rakesh
    Pls award points if you find the solution

  • Class for Purchase order item components and Production order components

    I'm looking for a some classes.   I'm very new to objects, so I could be searching for them incorrectly.
    The first class I'm looking for is a purchase order class that contains the item components.  I've looked at CL_PO_ITEM_HANDLE_MM and CL_PO_HEADER_HANDLE_MM.  I couldn't find components as a part of either of the classes.
    The second one I'm looking for is not as critical.  It is for the components for a production order.   I have a function module: BAPI_PRODORD_GET_DETAIL that gets the components for the order.  However, to take advantage of objects - I read somewhere - that if possible I should avoid calling a function module.
    Any help that you could give would be greatly appreciated.
    Thank you!
    Michelle

    Hello Michelle
    I do not think there are already classes available on ERP 6.0 for reading production order (yet I might be wrong...). However, regarding purchase order you are already on the right track.
    *& Report  ZUS_SDN_OO_READ_PO
    *& Thread: Class for Purchase order item components and Production order components
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1206523"></a>
    "& NOTE: Coding adapted from BAPI_PO_GETDETAIL1
    REPORT  zus_sdn_oo_read_po.
    TYPE-POOLS: abap, mmpur.
    PARAMETER:
      p_ebeln   TYPE ebeln  DEFAULT '3000000045'.
    DATA: gs_document    TYPE mepo_document,
          go_po          TYPE REF TO cl_po_header_handle_mm,
          gs_header      TYPE mepoheader,
          gd_tcode       TYPE sy-tcode,
          gd_result      TYPE mmpur_bool.
    data: gt_items       type PURCHASE_ORDER_ITEMS,
          gs_itm         type PURCHASE_ORDER_ITEM,
          gs_item        type mepoitem.
    START-OF-SELECTION.
    *  prepare creation of PO instance
      gs_document-doc_type    = 'F'.
      gs_document-process     = mmpur_po_process.
      gs_document-trtyp       = 'A'.  " anz.  => display
      gs_document-doc_key(10) = p_ebeln.
    *  object creation and initialization
    **  l_ebeln = purchaseorder.
      CREATE OBJECT go_po.
      CALL METHOD go_po->po_initialize( im_document = gs_document ).
      CALL METHOD go_po->set_po_number( im_po_number = p_ebeln ).
      CALL METHOD go_po->set_state( cl_po_header_handle_mm=>c_available ).
    *  read purchase order from database
      gd_tcode = 'ME23N'.
      CALL METHOD go_po->po_read
        EXPORTING
          im_tcode     = gd_tcode
          im_trtyp     = gs_document-trtyp
          im_aktyp     = gs_document-trtyp
          im_po_number = p_ebeln
          im_document  = gs_document
        IMPORTING
          ex_result    = gd_result.
    *  there was a problem in reading the PO
      IF ( gd_result EQ mmpur_no ).
    **    l_messages = l_handler->get_list_for_bapi( ).
    **    PERFORM return TABLES l_messages return
    **                          poitem poschedule poaccount.
    **    CALL METHOD l_po->po_close( ).
      ELSE.
        gs_header = go_po->if_purchase_order_mm~get_data( ).
        WRITE: / gs_header-ebeln,
                 gs_header-bukrs,
                 gs_header-bsart,
                 gs_header-lifnr.
      ENDIF.
      gt_items = go_po->if_purchase_order_mm~get_items( ).
      LOOP AT gt_items INTO gs_itm.
        gs_item = gs_itm-item->get_data( ).
        write: / gs_item-ebelp,
                 gs_item-matnr,
                 gs_item-menge.
      ENDLOOP.
    END-OF-SELECTION.
    Regards
      Uwe

  • Process orders and Production order in PP

    Hi,
    In our case Process orders are used in most of the case ,than production orders. Pls tell wheather Process orders are also pulled by the extractors(PP) and behave similar in all the Standard PP reports. and what is the diffrence between Process orders and Production order??
    Regards
    Nair

    Hi
    In PP, you can see Production Planning and Production Planning -Process Industry
    Production order is for manufacturing industry
    Process order is for process industries where input raw material is processed to arrive at end product.Process order keeps shop floor person aware of processing status.If your client's business have many processes than manufacturing you might come across more processing orders
    Regards
    N Ganesh

  • Hello! I want to cancel my annual plan, but in my account under plans and products it is blank. I have signed up for indesign with a monthly fee.

    Hello! I want to cancel my annual plan, but in my account under plans and products it is blank. I have signed up for indesign with a monthly fee.

    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • How to compare sale order bom and production order bom.

    i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

    Hi,
    Check Tcode:CS14 to SD/PP BOM's
    Chidambaram

  • Any stanard BAPI have both sales order and production order

    hi Experts,
    i need to Identify any standard BAPI have both sales order and production order. If such BAPI is not available, create 'Z' BAPI to do the same.it's my require ment?plz give me suggestion it's useful for my project. i will give good points.
    thanks and regards,
    bbm

    hi eswar,
    can you give me how to do? and what i can use import,export,table and sourcecode bcz i am new in BAPI side even now i am working in SAP XMII project.
    so plz guide me.
    thanks and regards,
    bbm

  • BOM and Production Order: Multiple Inputs to Multiple Outputs

    Dear All, My client's industry required BOM and Production Order must be Multiple Inputs to Multiple Outputs. We propose to create customization program to work on it but client do not want any customizations. Any suggestions? SAP B1 8.81 PL13 Thank you very much in advance. Best Regards, Vivian

    Hi,
    Please advice your requirement with an example. There is possibility to input multiple components to produce single finished product.
    Not sure you have checked with SAP help file. If not refer SAP help file and below blog.
    http://scn.sap.com/community/business-one/blog/2014/03/01/how-to-implement-production-in-default-sap-business-one
    Thanks & Regards,
    Nagarajan

Maybe you are looking for