Strange behavior with Applications folder
I recently installed Mavericks on my iMac, and now something is screwed up with my system.
When I drag a new application into the closed Applications folder, for some reason the app does not immediately show up in there. I can type the first two letters of the name and it jumps to the location where it should be, but the app is not there.
If I do a spotlight search, the app shows up in the found results. If I choose"show in enclosing folder" From the contextual menu, it opens a new window for my applications in list view (even though I already have the applications folder open) and that window shows the found application and one other application, but no others. Later, if I open up the applications folder, the newly installed application finally shows up there where it is supposed to be.
Is this a known issue and Mavericks, or is there something wrong with my installation?
No, it is not a Mavericks problem. Sounds more like a permissions or other problem in your Applications folder. I would suggest the following:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Similar Messages
-
Strange behavior with Label#setWrapText(true) in GridPane.
I've got a strange behavior with a Label, which has setWrapText(true) in a GridPane.
Check out the sample and click the button.
You see, that the GridPane suddenly behaves as if it had GridPane.setVGrow and HGrow set for the lblStatus.
(it takes the full available space).
Furthermore the first column shrinks to a minimum, so that lblText1 can't display its text anymore.
Tested with 2.1 GA.
Any help with that?
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Insets;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.Label;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class TestApp4 extends Application {
public static void main(String[] args) {
launch(args);
@Override
public void start(final Stage stage) throws Exception {
GridPane gridPane = new GridPane();
gridPane.setPadding(new Insets(2, 2, 2, 2));
Label lblText1 = new Label();
lblText1.textProperty().set("Some text");
Label lblText2 = new Label();
lblText2.textProperty().set("Some other text");
Button btnClick = new Button();
btnClick.textProperty().set("Click me");
final Label lblStatus = new Label();
lblStatus.setWrapText(true);
gridPane.add(lblText1, 0, 0, 1, 1);
gridPane.add(lblText2, 1, 0);
gridPane.add(lblStatus, 0, 2, 2, 1);
gridPane.add(btnClick, 0, 3, 2, 1);
btnClick.setOnAction(new EventHandler<ActionEvent>() {
@Override
public void handle(ActionEvent actionEvent) {
lblStatus.setText("very long text, very long text, very long text, very long text,very long text, very long text");
gridPane.setGridLinesVisible(true);
Scene scene = new Scene(gridPane, 300, 300);
stage.setScene(scene);
stage.show();
}Edited by: csh on 19.07.2012 03:35It seems the Label doesn't like it, that it is in a GridCell with rowspan = 2
If it is in a normal cell (no rowspan), it works.
If I add ColumnConstraints to the gridpane, it kind of works, but the Label still occupies more space than it should.
Edited by: csh on 19.07.2012 03:51 -
Strange behavior with Bindings??
Hello to all JavaFX 2 Binding experts,
I have a strange behavior with Bindings in JavaFX 2.2 (Java 1.7 update 21). Please have a look at the following source code:
package test;
import javafx.application.Application;
import javafx.beans.binding.BooleanBinding;
import javafx.beans.property.SimpleBooleanProperty;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.fxml.FXML;
import javafx.fxml.FXMLLoader;
import javafx.scene.Parent;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.RadioButton;
import javafx.stage.Stage;
public class BindingVsProperty extends Application
@FXML
private RadioButton opt11;
@FXML
private RadioButton opt12;
@FXML
private RadioButton opt21;
@FXML
private RadioButton opt22;
@FXML
private Label lbl11And21;
@Override
public void start(Stage arg0) throws Exception
FXMLLoader l_loader = new FXMLLoader();
l_loader.setLocation(BindingVsProperty.class.getResource("BindingVsproperty.fxml"));
l_loader.setController(this);
l_loader.load();
Scene l_scene = new Scene((Parent)l_loader.getRoot());
arg0.setScene(l_scene);
useBinding1();
//useBinding2();
//useBinding3();
arg0.show();
private void useBinding1() // NOT WORKING - ChangeListener.changed(..) is not called
BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
@Override
public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
private void useBinding2() // OK - ChangeListener.changed(..) is called
BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
lbl11And21.visibleProperty().bind(l_andOpt11Opt21);
l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
@Override
public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
private void useBinding3() // NOT WORKING - ChangeListener.changed(..) is not called
BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
new SimpleBooleanProperty(false).bind(l_andOpt11Opt21);
l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
@Override
public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
public static void main(String[] args)
launch(args);
<?xml version="1.0" encoding="UTF-8"?>
<?import java.lang.*?>
<?import java.util.*?>
<?import javafx.scene.control.*?>
<?import javafx.scene.layout.*?>
<?import javafx.scene.paint.*?>
<BorderPane id="BorderPane" maxHeight="-Infinity" maxWidth="-Infinity" minHeight="-Infinity" minWidth="-Infinity" prefWidth="371.0" xmlns:fx="http://javafx.com/fxml">
<center>
<AnchorPane prefHeight="200.0" prefWidth="200.0">
<children>
<Label id="lblAnd" fx:id="lbl11And21" layoutX="82.0" layoutY="121.0" text="Group1 Opt1 AND Group2 Opt1 is true" textFill="#41cc00" visible="false" />
<RadioButton fx:id="opt21" layoutX="216.0" layoutY="24.0" mnemonicParsing="false" text="Group 2 - Opt 1">
<toggleGroup>
<ToggleGroup fx:id="group2" />
</toggleGroup>
</RadioButton>
<RadioButton fx:id="opt22" layoutX="216.0" layoutY="67.0" mnemonicParsing="false" text="Group 2 - Opt 2" toggleGroup="$group2" />
<RadioButton fx:id="opt11" layoutX="29.0" layoutY="24.0" mnemonicParsing="false" text="Group 1 - Opt 1">
<toggleGroup>
<ToggleGroup fx:id="group1" />
</toggleGroup>
</RadioButton>
<RadioButton fx:id="opt12" layoutX="29.0" layoutY="67.0" mnemonicParsing="false" text="Group 1- Opt 2" toggleGroup="$group1" />
</children>
</AnchorPane>
</center>
</BorderPane>
What I need for my application is the use case in useBinding1(), i.e., a BooleanBinding where several listeners are attached to. The problem is that I never get a callback in the ChangeListener if one of the RadioButton.selectedProperty() is changed.
Now I tried what happens if I use the same BooleanBinding for another binding to a property plus the listener, now the listener gets callbacks as expected! (see useBinding2() )
Than I thought may be Bindings must be bound in order to trigger listeners and tried useBinding3() where I bind the BooleanBinding to a new BooleanProperty, in this case the listener doesn't get callback anymore...
And now I'm very frustrated and hope that anyone out there can help me to understand this strange behavior.
Thanks a lot!
WhiteAntelopeAll these work just fine for me: the listeners are all called as expected. Note that the listener is only invoked when the value of the binding actually changes, which doesn't happen every time a radio button is pressed. (For example, if both buttons are unselected, the binding is false. If one button is selected, the binding remains false and the listener is not invoked. When the second button is selected, the binding becomes true, and the listener is invoked.)
-
Strange behavior with DefaultCellEditor
Hello everybody,
I found a strange behavior with DefaultCellEditor using a JTextField in a JTable. The following line will show, what I mean:
setDefaultCellEditor(String.class,new DefaultCellEditor(new JTextField()));
Imho this should do the same as JTable does already, when it installs a JTextField as default cell editor for cell values of the String class. But, it seems, that it is not the same:
When I add this line in the constructor of a JTable subclass the editor component seems to be less wide and less high to the right and bottom - it looks so with Win95 with JDK 1.4.0 - but with Win2000 it is correct for example.
My question is - how can it be, that the normal default cell editor does not have this behavior but when I use the line above, it is displayed in the wrong way?- What does the default cell editor in another way than I do it, that it has not this ugly display?
I would like to look in the sources, but unfortunately I can't find the source code in JDK 1.4.0 - perhaps you have a hint, where to find it.
greetings MarsianIt seems the Label doesn't like it, that it is in a GridCell with rowspan = 2
If it is in a normal cell (no rowspan), it works.
If I add ColumnConstraints to the gridpane, it kind of works, but the Label still occupies more space than it should.
Edited by: csh on 19.07.2012 03:51 -
Strange behavior with Collections
Hello!
I have a - from my point of view - strange behavior with a List (same also applies to Vector, LinkedList, and others):
List<String> myList = new myList<String>;
myList.add("One");
while (true) {
try {
System.out.println(myList.size());
throw new Exception();
} catch (Exception e) {
e.printStackTrace();
}And the result is 1, 2, 2, 2, ...although I added only one element. The two elements in the List point to the same object.
What could case this issue?
Regards,len00x wrote:
List<String> myList = new myList<String>;This doesn't even look like it will compile for at least one reason, easily two. -
Strange behavior with "insertTextAsContent"
Hi,
I've got a strange behavior with this loop :
for (j = 0; j < myParagraph.characters.length-1; j++) {
var myCharacter = myParagraph.characters[j];
if (myCharacter.appliedFont.fontStyleName == "Regular") {
alert(myCharacter.contents);
myXmlElement.insertTextAsContent(myCharacter.contents, XMLElementPosition.ELEMENT_END);
I loop through every characters of a paragraph, test if they are "regular", "italic", "bold"..., and store them in different xmlElement. Everything is fine except that every double characters (in french : homme, cette, elle, ville...) output in my xmlElement as one only character (home, cete, ele, vile...). I try with "aaaaaazzzzzzeeeeeerrrrrtttttyyyyy" and it give me, the same way, "azerty" ?!
The "alert" line output the correct full sentences character by character ("h", "o", "m", "m", "e"...).
If you have any idea to explain, you are more than welcome
Thanks
** edit : don't know if it's important but I'm using CS6 **Hi
Have you seen this in the object model viewer?
XMLElement.insertTextAsContent (using:varies, position: XMLElementPosition ): Text
Adobe InDesign CC (8.0) Object Model
Inserts the specified text as content before, in, or after the XML element.
using: Data Type: varies
The text to be inserted. Can accept: String or SpecialCharacters enumerator.
position: Data Type: XMLElementPosition
The position at which to insert the text. Note that text inserted before or after the element does not become part of the content of the element. Instead, it becomes content of the parent of the element.
Don't ask me why it works when there is no doubled character
So i tried the following and it worked. I hope this will solve your problem.
function main() {
if (app.documents.length != 0) {
var myDoc = app.activeDocument;
var myParagraph = myDoc.textFrames[0].paragraphs[0];
var myXmlElement = myDoc.xmlElements[0];
for (j = 0; j < myParagraph.characters.length-1; j++) {
var myCharacter = myParagraph.characters[j];
if (myCharacter.appliedFont.fontStyleName == "Regular") {
alert(myCharacter.contents);
myXmlElement.contents += myCharacter.contents;
alert(">" + myXmlElement.contents+ "<");
} // if
} //for
} // if
} // main()
Kind regards
Dani (from Switzerland) -
Strange behavior with csv flat file integration
Hi,
i've a real strange behavior with csv flat file integration.
I've defined the file inbound with | as separator
Here is the sender payload result, extra columns appears !
<row>
<VAL1>D</VAL1>
<VAL2 />
<VAL3>01</VAL3>
<VAL4 />
<VAL5 />
<VAL6>003160000</VAL6>
<VAL7 />
<col>003160001</col>
<col />
<col>2</col>
<col />
<col>91200604212</col>
<col />
<col>VIRTUAL DJ HOME EDITION</col>
<col />
<col>2</col>
<col />
<col>2</col>
<col />
<col />
<col>2</col>
<col />
</row>
When i changed the separator to ; in my file and in the file inbound it gives the following.
Everything is ok.
<row>
<VAL1>D</VAL1>
<VAL2>01</VAL2>
<VAL3 />
<VAL4>003160000</VAL4>
<VAL5>003160001</VAL5>
<VAL6>7</VAL6>
<VAL7>91200604212</VAL7>
<col>VIRTUAL DJ HOME EDITION</col>
<col>10</col>
<col>10</col>
<col />
<col>10</col>
</row>
Why using a different separator would change the payload ?
It will be a good thing for me if I could use the pipe separator.
ThanksCan you give the steps you're using to get this error? I'm not seeing any problem here.
1) Create a new audio project (44.1 KHz).
2) Arm the record head in track 1 by pressing the "R" button in that track. Verify audio levels.
3) Record by pressing the record button in the audio controls.
4) Stop recording by pressing the stop button.
5) Play back the resulting audio. Sounds fine.
6) Select File > Export.
7) Change the file format to WAVE file. Change the bit depth to 16 bit, change the sample rate to 44.1 KHz.
8) Type the name SAVETEST.wav and click on the Export button.
9) Play back the resulting WAV file in QuickTime Player, Apple Loops Utility, etc. and it seems just fine.
What am I missing that you're doing? -
Strange Behavior with gMSA in Server 2012 R2
Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
NickVIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
+ FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick -
Strange behavior with Zoom and Image control
HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect? -
Hi Team,
I am using HTMLDB V2.0 and Firefox V1.5.0.1. I used wizard to create a report/form application. However, when I press a button to update the form all the buttons line up in a vertical row and I then have to press the same button again.
My application is 30412 at htmldb.oracle.com. The problem is occurring at page 4. Go to page 3 (2nd tab) and select any record. You will be directed to page 4. Then when you press any button (cancel, create, delete, apply changes) on page 4, page 4 is refreshed and the buttons strangely line up in a vertical column. I then have to press the same button again before the update occurs.
I have the same report/form setup on pages 1 and 2 and it is working fine on those pages.
This strange behavior is not occurring in IE. I also notice that the font size is bigger in IE .
I would appreciate any help you might offer.
I really enjoy working with HTMLDB.
Thanks, AndySorry about that. I removed all the authorization schemes from the application. I also changed the authentication scheme to HTMLDB. Let me know if I need to do something more for you to get access.
Thanks for looking at it.
I think it may have something to do with the "button, alternative 3" template from theme 3 that I am using. When I switch to the "button" template from theme 3 then the strange behavior goes away in Firefox.
Andy -
Strange behavior with obssocookie on different browser
Hi,
I am trying to integrate OAM with our application deployed on WLS. I have set up an IIS proxy server and installed a web gate on it. I have seen a couple of strange behavior
1) If I try to access some static image file, SSO keeps asking for authentication. It happens for both firefox and IE, but it doesn't happen for chrome though. Looks like for image file request, the obssocookie is not passed correctly. Anyone sees that before?
2) If I use firefox on the machine where WLS app server is installed to connect to proxy server, if I use hostname in the URL, I don't see the obssocookie. If I use IP address in the URL, I can see obssocookie. If I use IE or any browser from any other machine, obssocookie is always available
thanks.
-WeiI found it in the document
B.1 How Logout Works
The WebGate logs a user out when it receives a URL containing "logout." (including the "."), with the exceptions of logout.gif and logout.jpg, for example, logout.html or logout.pl. When the WebGate receives a URL with this string, the value of the ObSSOCookie is set to "logout."
The Access System sets an obSSOCookie for each user or application that accesses a resource protected by a WebGate. The obSSOCookie enables users to access resources that are protected by the Access System that have the same or a lower authentication level. Removing the ObSSOcookie causes the WebGate to log the user out and requires the user to re-authenticate the next time he or she requests a resource that is protected by the Access System.
Well, I havn't got that far in the document:)
Thanks a lot for your help.
-Wei -
Strange file in Applications folder, placeholder.txt
Saw this file today, placeholder.txt, this file wasn't here before, it is in my Applications folder and on the dock as well, with contents (copy pasted):
Placeholder to make sure directory gets created during a synch
File creation date January 16, 2010 7:43 AM
I don't have any backups or even a Mac back then. Was this added during 10.7.2, do you have this too? I'm just going to delete it.It's not in 10.7.2 only, I have 10.6.8, and it's there too. If you delete it, it reappears. Somepeople suggest it's from adobe digital editions.
-
Hi everyone!
I think I have a strange problem with the NI 9401 modules.
My hardware is a CompactRIO and I'm using Labview 8.0.
I'm reading a 13 bit encoder with two NI 9401 modules: the first for 8 input channels and the second for the other remaining 5. input channels.
13 bits means that the slots in the outest part of the counter are 8192 so i expect my encoder to count up/down till 8192. What instead happens is that the counter goes up to 7934, then suddenly to 7860, then from 0 to 254 and then finally to 0 again and up again to 7934 and the story always goes on like this. I put the true/false outputs of the encoder in a boolean array and then, from the boolean array to a number. (see the attacched VI)
Here's how I devided the inputs between the two modules
-NI 9401 2 :
DIO0= 2^0
DIO1= 2^1
DIO2= 2^2
DIO3= 2^3
DIO4= 2^4
DIO5= 2^5
DIO6= 2^6
DIO7= 2^7
- NI 9401
DIO0= 2^8
DIO1= 2^9
DIO2= 2^10
DIO3= 2^11
DIO4= 2^12
When running the VI I suddenly realized that every time all the input for each modules should be true ( i.e. five leds on for the second module or eight leds on for the first) , the value of all the inputs goes immediately to 0 i.e. all the leds switch off . To make an example: I see 4 leds on for the second module but when comes the time of the fifth, all the leds switch off so it means all the inputs are false which i can't understand. I tried to change the pin assignments in order to read the same inputs from different pins and this did'nt change anything. I tried to use only 4 inputs for the second module and this didn't work. Every time all the inputs for each module should be true it goes up to (n-1) inputs true and the n inputs zero. More information about this strange behaviour: while a normal false input produces a voltage of 0.036 V the voltage I measured from the last pin that should be true and that should give me all the leds on for one module, produces instead -0.146 V.
This is everything I tried in order to solve this problem but now I'm at a dead end.
Could it be a kind of module setting which I didn't consider?
Due to all the attempts I've made I excluded any disfunction of the encoder so I focused my attention to the modules.
Does anyone of you have any idea?
Thanks!!
Rob_F
Attachments:
Prova_encoder2.lvproj 14 KB
Prova_encoder2.vi 155 KBThanks a lot JMota!
We just sent back the encoder to the company who sells them. They want to be sure it's not a product defect or, even worse, a problem of conflict with the NI 9401.
In the meanwhile we built up the acquisition VI for the accelerometer and the encoder. One while loop sends the accelerometer data to a DMA FIFO and another parallel while loop is used to read the encoder outputs and send these data to another DMA FIFO. I did this because I know only 1 DMA FIFO can be used for each channel. When I read the data with two FIFO.read with two parallel loops in the Real-Time I discovered that I can't make them work indipendently as i thought i.e. reading settings of one FIFO.read ( number of elements and loop timing) affects also the other FIFO.read .
Any explanation for this behavior?
Thanks again JMota! -
Aperture - strange behavior with external editor
Although I don't do this often, there are times I need to edit images with a 3rd party editor like Elements or Pixelmator. I noticed when I send an image by Photos> Edit with Pixelmator, the image that comes in is lacking any edits I may have created previously, particularly with Nik filters. Obviously, those edited versions are not being exported to the editor correctly. However, if I first "export" the image, and then bring it in an editor, the edits are carry over as one would expect. I am using the latest versions of both Aperture and Lion.
Anyone else noticing this and is there a way to change this strange behavior?
KenHi Perfectism-
Most likely it is a bad power supply brick. This can be difficult to troubleshoot as the drive appears to spin up and the little light blinks but that is about all you get.
If the drive is still under warranty contact LaCie about replacing the power supply brick.
Luck-
-DP -
3 problems with application folder???
1. In my applications folder I have 2 folder aliases, one named applications and the other named applications 2. Do I need these? If not how can I get rid of them?
2. I opened the application folder and did drag the Firefox icon to the dock. Now there isn't an icon for Firefox in the application folder? Shouldn't there be one?
3. I recently downloaded Mozy. Again there isn't an icon in the application folder...Shouldn't there be one?
Any help with these would certainly be appreciated.....
Message was edited by: Shelby19751. Select each and hit CMD+delete key to move them to the trash. Then, CMDSHIFTdelete to empty the trash.
2. Yes.
3. Only if you put Mozy in that folder.
For 2 & 3, restart and see if the icons pop back. If not, launch the Terminal app in /Applications/Utilities/, copy & paste this one-liner into the window that pops up, hit the return key, quit the Terminal app, OPTION-click & hold on the Finder's Dock icon, and select Relaunch. That should restore the icons.
*/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user*
Maybe you are looking for
-
I switch between the Notes Plus app and Keynote app during my lecture. I show the slides in Keynote and when I need to draw sketches and do detailed derivations, I multitask to Notes Plus and use it as my White Board and then return to Keynote to c
-
Iphoto not displaying imported photos
hello i would appreciate it if someone could give me an idea of what is happening with my iphoto programme.i transfer photo from the camera via usb iphoto displays the photos in abumn format but as soon as i click on it to make it viewable as a large
-
Define ranges in selection screen
hi all does anybody know how to declare ranges on selection screen i have to declare it for matnr thanks for your help
-
External manufacturer name in the External Manufacturer field in the contr
hI, I cant fing external manufacturer name in the External Manufacturer field in the control data of the vendor master i already activate the field as required in account group setting, but still I can't find it anyone could help? thanks
-
ISE MAR in a Kiosk Environment
Situation: Windows native supplicant configured for "Machine or User authentication." ISE configured for MAR with cache timeout of 24 hours. Questions in Red: 1. Every morning Machine boots and successfully authenticates wiht 802.1X. Machine dACL p