Strange behaviour in IMAP-Mode, seems like POP3

Hi all,
yesterday my new E61 arrived from amazon. Nice gadget but I really need a working solution for my email.
I have set up an IMAP-account (web.de pay in Germany). Now I sometimes receive the mails much later than on my computer (interval is 5 minutes). I do not receive all mails on both devices: Some only appear on my computer, others appear only on the E61. It seems like it fetches some mails (like POP does) but it really is set to IMAP4. So sometimes mails only appear on the E61 and not on my computer. Mails sent via E61 do not appear in my computers "sent mails" bin. Mails deleted on the E61 do not get deleted on my computer (I did the setting for that on the E61).
I still have the April firmware but it is annoying not to be able to use it as a proper email solution right from the start.
What can I do to fix the issue (IMAP)?
Thank you

first off, i would confirm your email provider supports this device.
after that, i would then enquire as to how the server handles your emails.
also, how do you connect? wlan or 3g? it could be an issue with your connection...

Similar Messages

Strange behaviour in .mac web galleries

Hi,
I have started to use .mac web galleries with aperture 2. However, I am witnessing some very strange behaviour. Firstly, it seems to take forever to update, the icon at the side of the gallery is permanently on the 'update' icon.
Secondly, whenever I add new photos to the gallery it actually creates an entirely new gallery with all the photos from the previous gallery.
Is anybody else having issues with the aperture flavour of .mac web galleries?
thx
Phil

I have a similar problem Phil! I watch the status indicator for a web gallery progress to about half way then it stops, the album doesn't get published. I have published albums before this started happening, and have published other albums successfully but sometimes certain albums don't publish. I delete them and repost them to no avail. Hopefully we can get some answers! This is quite lame, don'tcha think?

View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

IPod will not play any music. Seems like it is in "Pause" mode. No sound from either the head phones or internal speaker. I have 418 songs stored and none will play.

iPod will not play any music. Seems like it is in “Pause” mode. No sound from either the head phones or internal speaker. I have 418 songs stored and none will play. I have tried resetting, turning on and off the iPod, etc. but to no avail.

Try restoring from backup. Next would be a restore to factory defaults/new iPod.

HT5463 Why is there not an option to allow texts from the same group of allowed callers in do not disturb mode? Seems like a no-brainer!

Why is there not an option to allow texts from the same group of allowed callers in do not disturb mode? Seems like a no-brainer!

www.apple.com/feedback

In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue c

In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue came up while using my trackpad. Any thoughts?

In the Develop Module, you right-click on one of the other Panel Headers (for example, Tone Curve) and then place a check next to Basic

Strange behaviour in SOAP connection mode

Hello,
I created a custom worklist app using SOAP connetion mode and I experiencing strange behaviour using it.
Sometimes it works and sometimes not. The only difference beetwen the two working config is nearly nothing. Just server restart are performed to make it work or not. No config files or applications deployement are done between two restart.
So It's lotery to get it work.
When it doesn't work, I have the following error messaging (see below)
Does anyone have a clue to get it work each time ?
Regards.
ORABPEL-30509
Error in invoking task query service.
A client side error occured in invoking the task query service.
Please check the exception error stack to identify the error. Contact oracle support if error is not fixable.
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:183)
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:200)
     at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:93)
     at eu.eca.itt.eworkflow2.controller.action.TaskListAction.process(Unknown Source)
     at eu.eca.itt.eworkflow2.controller.action.TaskListAction.execute(Unknown Source)
     at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
     at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
     at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP connection factory: Provider com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory not found
     at javax.xml.soap.SOAPConnectionFactory.newInstance(SOAPConnectionFactory.java:32)
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:131)
     ... 29 more

I also tried to change connection setting with
System.setProperty("javax.xml.soap.SOAPFactory", "com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl");
System.setProperty("javax.xml.soap.SOAPConnectionFactory", "com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory");
I get it work for ....... a day (or a restart I suppose) reverting back to initial settings to make it work again.
Does It mean SOAPConnectionFactories gets corrupted upon restart once I used them ?
Is a Service Request a good idea ?
Regards.

Strange iTunes behaviour which no one seems to get, but me! (Track naming)

I have a very annoying issue which no one seems to get, but me!
To give some background info:
- Using latest version of iTunes (this problem has occured in older versions as well)
- Using a 4G Nano (also happened when using a 2G Nano)
- Windows 7 x64 (although also happened when I was running Windows XP)
- All tracks are correctly tagged using: Artists / Track / Album / Track # / Album Artist / CD # fields
- MP3 files are saved in the format of: Artist - Album\track number - Artist - Track.mp3
When I import my albums, the track names appear with the artist names in front of them. However, if i right click on a track and select "get info", then close the window, it then magically corrects itself, and removes the artist name from the track name.
Here's a screenshot to illustrate what I mean:
In the screenhot above, the two highlighed files are files which i've right clicked and chosen "show info" on. As you can see, the track names are now "correct" and don't have the artist name in front of them.
Here is an example of the info on one of the files, to show that they are tagged correctly:
It seems like a minor issue, but it's actually pretty annoying, as if I load up an album on my Nano, the track listing will look something like:
Florence + The Machi...
Florence + The Machi...
Florence + The Machi...
Florence + The Machi...
Florence + The Machi...
Florence + The Machi...
Florence + The Machi...
And seeing as it doesn't scroll those titles... it's pretty useless!
One way i've found to "fix" the issue, is to select my entire library, choose "show info" then change something minor (e.g. volume adjust). Then, once it goes through my library, it fixes all the track names as above. I don't really want to have to do this every time I import new albums into my library though, as this takes ages!
I'd appreciate it if anyone could maybe explain what's going on and if there is a proper fix?
Thanks!

I have walked into a few stores and updated the playbook OS and showed a few people how to operate them
most displays had no wifi and not many (if any) apps were installed
one place didnt even have it powered up, but all the othres were
AT&T store was pushing android stuff and not mentioning others. The sales men were using android devices too.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Strange Behaviour in Pentium IV machine

Hi all. I put this post in Java HotSpot forum, but that forum seems not to be as popular as this, so I've decided to post it here too.
I've been reading posts in this forum (and another in this site) for more than a week trying to find any idea that could help me with my "strange" problem, but with no success.
I've developed an application that manages some info stored in Mysql. My developing machine is a Pentium II (400MHz) with Red Hat 7.3 Valhalla installed. I use Mysql 3.23.49 and J/Connector (version 2.0.14) downloaded from Mysql site and JRE version 1.4.1.-b21.
The production machine is a Pentium IV (1.60 GHz) , with the same Red Hat version, the same JRE version and Mysql 3.23.51.
Well, in developing machine I am able to run up to 4 instances of the application witout crashing, only decreasing timing performance. But in production machine, I get and "strange" behaviour. Sometimes (1 of each 10 times) the application crashes (even the machine crashes sometimes), and I get Hot Spot log files (hs_err_pid####.log) like these
Type 1 ------------------------------------->
Unexpected Signal : 11 occurred at PC=0x403291D8
Function=skip_method_invoke_and_aux_frames__12vframeStream+0x58
Library=/usr/java/j2sdk1.4.1/jre/lib/i386/client/libjvm.so
Current Java thread:
at java.security.AccessController.doPrivileged(Native Method)
at sun.io.Converters.getDefaultEncodingName(Converters.java:66)
at java.lang.StringCoding.decode(StringCoding.java:226)
at java.lang.String.<init>(String.java:383)
at com.mysql.jdbc.Buffer.readLenString(Unknown Source)
at com.mysql.jdbc.MysqlIO.getResultSet(Unknown Source)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(Unknown Source)
at com.mysql.jdbc.MysqlIO.sqlQuery(Unknown Source)
at com.mysql.jdbc.Connection.execSQL(Unknown Source)
- locked <0x448f92d0> (a com.mysql.jdbc.jdbc2.IO)
at com.mysql.jdbc.Connection.execSQL(Unknown Source)
at com.mysql.jdbc.Statement.executeQuery(Unknown Source)
- locked <0x448f92d0> (a com.mysql.jdbc.jdbc2.IO)
at com.mysql.jdbc.jdbc2.Statement.executeQuery(Unknown Source)
at GeneraTablaDiasCerrados.<init>(GeneraTablaDiasCerrados.java:99)
at GeneraTablaDiasCerrados.main(GeneraTablaDiasCerrados.java:425)
Type 2------------------------------------------------>
Unexpected Signal : 11 occurred at PC=0x424AC980
Function=sqlQueryDirect (//or nextRow//) (compiled Java code) (or nextRow)
Library=(N/A)
Current Java thread: (//No output in this case//)
Type 3------------------------------------------------------>
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4212E3B0
Function=(null)+0x4212E3B0
Library=java
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
- locked <0x44901b38> (a java.io.BufferedInputStream)
at com.mysql.jdbc.MysqlIO.readPacket(Unknown Source)
at com.mysql.jdbc.MysqlIO.sendCommand(Unknown Source)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(Unknown Source)
at com.mysql.jdbc.MysqlIO.sqlQuery(Unknown Source)
at com.mysql.jdbc.Connection.execSQL(Unknown Source)
- locked <0x448f92e8> (a com.mysql.jdbc.jdbc2.IO)
at com.mysql.jdbc.Connection.execSQL(Unknown Source)
at com.mysql.jdbc.Statement.executeQuery(Unknown Source)
- locked <0x448f92e8> (a com.mysql.jdbc.jdbc2.IO)
at com.mysql.jdbc.jdbc2.Statement.executeQuery(Unknown Source)
at GeneraTablaDiasCerrados.<init>(GeneraTablaDiasCerrados.java:99)
at GeneraTablaDiasCerrados.main(GeneraTablaDiasCerrados.java:425)
---------------------------------------------->
After this text, I get Dynamic libraries info.
I can't figure out what's happening. I have read in these forums that Signal 11 is about Segmentation Fault, or JVM trying to write in forbidden positions.
Later I read that JVM could crash on Pentium IV processors under certain circumstances, but isn't those issues supossed to be fixed in version 1.4.1?
The last trail I'm following is J/Connector, because in error messages type 2 and 3 are involved mysql classes. But it doesn't explain the fact that in developing machine everything runs properly.
I also consider the posibility of corrupted files in hard disk, but all of them seem to be OK (sizes in production machine matches those in developing machine).
Can anyone help me showing me another trail to follow?
Thanks to all in advance.
Note: Please, forgive my English and the length of this post.

Hi OMcGovern. Thanks for your answer.
I've a couple of theorys,
1) The second last stack trace call is for encoding.
The basic US version of the JRE only supports about
ut 8 basic encoding schemes. You could try running it
with the international version of the JRE.
( To check version : if i18n.jar is in JRE's lib
directory, it's the international version )I've checked it and I don't have the international version (not in production machine and not in developing machine). I downloaded the "Linux RPM in self-extracting file" version, (in both cases) and there is no choice for downloading any "international" version or something like this. I'll search for it in sun site. It seems to be a good guess to follow, because production machine is allocated in the USA, and developing machine is here in Spain.
2) Running java -Xint ( interpreted mode ), might
rule out any hotspot errors. It could give you more
debugging information too.
Worth a shot.I'm not running with that option.
3) It doesn't quite make sense that the last stack
trace entry is a
security call, in an application. Are you doing
ng anything strange ?
Eg. writing your own classloaders or the like ?No I'm not doing. Maybe a problem with J/Connector, but my deep doubt and what's driving me crazy is : Why is runnig all ok (I was really proud of this fact because this is my first "big" app in Java) in my developing machine and crashing in production machine?
I'll look for i18n.jar, will install it and let's see what happens..
Thanks again.

APEX Listener and EPG - strange behaviour

Hi
For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
Before I did so I checked that my applications still worked in 4.1 and they did.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
Configuring APEX Listener and running the same application through that DOES display the images.
So this part of the application works under APEX Listener but not under EPG.
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
So this part of the application works under EPG but not under APEX Listener.
Has anyone else come across different behaviour depending on the mode of connection?
Thanks
Brian
[Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]

Hi Brian,
it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
Some parts of your initial post hint to that direction, e.g.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
For the moment, I still think the port conflict is my best guess.
You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
-Udo

Strange behaviour: two servers on the same port

Hi!
I hope this is the right section for this post. I need help about a strange behaviour involving a ServerSocket.
For my thesis I need to write a program that receives data from a pre-existing DSMS client, filters them and then sends them to a pre-existing DSMS server. And here is my problem: if I try to create a ServerSocket on the same port of the DSMS server, my program throws no exception, and the servers seem running on the same port. This is a behaviour that I'd like to avoid, but I cannot understand what the problem is. Can you help me?
The source code of the DSMS server can be found here (it's written in C++): http://infolab.stanford.edu/stream/code/stream-0.6.0.tar.gz
The source code of my server class, instead, is this one:
import java.io.*;
import java.net.*;
public class ThreadGenerator {
     private ServerSocket server;
     public void connect(String servPort, String cHost, String cPort) {
          try {
               server = new ServerSocket(servPort);
               System.out.println("SERVER running on port "+servPort);
          } catch (BindException e) {
               System.out.println("Address already in use!");
          } catch (Exception e) {
               System.err.println(e);
          try {
               while(true){
                    Socket client = server.accept();
                    StreamThread T = new StreamThread(client, cHost, cPort);
                    T.start();
          } catch (EOFException e) {
               System.out.println("Server closed connection!");
          } catch (Exception e) {
               System.err.println(e);
}I'm programming on Mac OSX Tiger, with Java 1.5.0.
Thanks in advance for your help.

The problem is still happening to me, I tried in this very moment. The code I'm using is the one I posted, and the second server is the one that I linked. I don't think there's anything else to add.
If you're sure that the problem is not in my code, then it means that it is in the linked server, which partially solves the problem. But I'd like to know, if it's possibile, if there is any other way to check if the port is already in use.

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour on text insert into a HTML pane

Hi all,
I am trying to fix a problem on inserting a span tag into an existing html page (in an EDITABLE JEditorPane).
The behaviour:
Assuming the cells in a table (3 rows, 2 columns) are numbered from 1 to 6, with cell one being the top left most, cell 2 top right, cell 3 middle left, etc.
1. Inserting the text "" in cell 4 causes during any attempt to later type into cell 5 the characters to be appended instead into cell 4, directly after the close span tag.
2. The insertion in the first place behaves strange. If I have the caret positioned for cell 5 so that I can insert there
(via the function void javax.swing.text.html.HTMLEditorKit.insertHTML(HTML Document doc, int offset, String html, int popDepth, int pushDepth, Tag insertTag) )
even though the caret position is visible in cell 5, the insertion seems to take place in cell 4.
I can sort of compensate for this by adding 1 to the offset. However, then when inserting into a line of text, for example, "the quick red fox jumped over the lazy dog"
I insert directly before the 'j' in 'jumped', the insertion looks like this "the quick red fox j..umped over the lazy dog"
So that is no solution.
IMPORTANT! Just to prove it is not the span tag causing the trouble, if this span tag already exists in a cell on 'Load' of the html file, the strange behaviour is not observed.
Something is going wrong here. It is me? Or is it a bug?
Please help!!
Here is a test app, and the test html you can use (place in current directory).
Please test like this:
1. run application (the html should be loaded into the pane)
2. the span tag is programmed to automatically insert at cell 4 (by using the +1 method on the insert)
3. another span tag was already existing in the html file, at cell 8
4. Attempt to type into cell 5
result: the text appears instead at cell 4
5. Type into cell 9
result: the text correctly is entered into cell 9
See the difference!!
Help!
The test java app:
package small.test;
import java.awt.BorderLayout;
import java.awt.Container;
import java.io.File;
import java.io.FileReader;
import java.io.IOException;
import java.io.StringReader;
import javax.swing.JEditorPane;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.SwingUtilities;
import javax.swing.text.JTextComponent;
import javax.swing.text.html.HTML;
import javax.swing.text.html.HTMLDocument;
import javax.swing.text.html.HTMLEditorKit;
import javax.swing.text.html.parser.ParserDelegator;
public class HtmlInsertTest extends JEditorPane
 public HtmlInsertTest()
 public static void main(String args[])
 JFrame frame = new JFrame("Loading/Saving Example");
 Container content = frame.getContentPane();
 frame.setSize(600, 600);
 final HtmlInsertTest editorPane = new HtmlInsertTest();
 editorPane.setEditable(true);
 JScrollPane scrollPane = new JScrollPane(editorPane);
 content.add(scrollPane, BorderLayout.CENTER);
 editorPane.setEditorKit(new HTMLEditorKit());
 JPanel panel = new JPanel();
 content.add(panel, BorderLayout.SOUTH);
 frame.setSize(600, 600);
 doLoadCommand(editorPane);
 editorPane.insertHTML("inserted text", 84);
 frame.setVisible(true);
 public static String getHTML()
 return
 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">"+
 "<HTML>"+ "<HEAD>"+
 " <META HTTP-EQUIV=\"CONTENT-TYPE\" CONTENT=\"text/html; charset=utf-8\">"+
 " <TITLE></TITLE>"+
 "</HEAD>"+
 "<BODY LANG=\"en-AU\" DIR=\"LTR\">"+
 "This is a test xhtml document. "+
 " "+
 " "+
 " "+
 " Here is a table:"+
 " "+
 " "+
 " "+
 " <TABLE WIDTH=100% BORDER=1 BORDERCOLOR=\"#000000\" CELLPADDING=4 CELLSPACING=0>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>"+
 " It has"+
 " </TD>"+
 " <TD WIDTH=50%>"+
 " 2 columns"+
 " </TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>And 4 rows</TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%>existing text</TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " </TABLE>"+
 " "+
 " "+
 " "+
 " "+
 " "+
 " "+
 " We will test the drag and drop"+
 " functionality with this document. "+
 " "+
 " It will be loaded with the hlml editor."+
 " "+
 " "+
 " "+
 " "+
 " </BODY>"+
 " </HTML>";
 public static void doLoadCommand(JTextComponent textComponent)
 StringReader reader = null;
 try
 System.out.println("Loading");
 reader = new StringReader(getHTML());
 // Create empty HTMLDocument to read into
 HTMLEditorKit htmlKit = new HTMLEditorKit();
 HTMLDocument htmlDoc = (HTMLDocument)htmlKit.createDefaultDocument();
 // Create parser (javax.swing.text.html.parser.ParserDelegator)
 HTMLEditorKit.Parser parser = new ParserDelegator();
 // Get parser callback from document
 HTMLEditorKit.ParserCallback callback = htmlDoc.getReader(0);
 // Load it (true means to ignore character set)
 parser.parse(reader, callback, true);
 // Replace document
 textComponent.setDocument(htmlDoc);
 System.out.println("Loaded");
 catch (Exception exception)
 System.out.println("Load oops");
 exception.printStackTrace();
 finally
 if (reader != null)
 reader.close();
 public void insertHTML(String text, int offset)
 SwingUtilities.invokeLater(new insertAction(this, text, offset));
 class insertAction implements Runnable
 String text = "";
 int offset = 0;
 JEditorPane jEditorPane1 = null;
 public insertAction(JEditorPane _jEditorPane1, String _text, int _offset)
 jEditorPane1 = _jEditorPane1;
 text = _text;
 offset = _offset;
 @Override
 public void run()
 HTMLDocument doc = (HTMLDocument)jEditorPane1.getDocument();
 HTMLEditorKit kit = (HTMLEditorKit)jEditorPane1.getEditorKit();
 try
 System.out.println("reading from string reader");
 kit.insertHTML( doc,
 offset,//+1
 text,
 0,//0
 0,//0
 HTML.Tag.SPAN);
 System.out.println(jEditorPane1.getText());
 catch (Exception e)
 System.out.println("error inserting html: " + e);
}Edited by: svaens on Jul 16, 2009 6:34 PM
fix another stuffed up attempt at a SSCCE.

Well, I know nothing about HTML in JEditorPanes. I have never been able to figure out how insertions work.
My comment was a warning to others. Some people (like me) avoid answering posting of this type for reasons given in the JavaRanch link. Others will answer anyway. Other might first check the other site to see if they are wasting there time, but they can only do that if a link was posted with the original question.
The only suggestion I have is to repost the question, (since this posting is now completely off topic) making sure to then respond to this posting stating that a fresh question has been asked so you don't get a discussion going on in two places.

Strange behaviour when placing text frame on top of image

Hi,
Win XP, FM 8.04
I have a front cover that consists of a TIF image that bleeds off the page. On top of that image I want to put a text frame with the book title.
The strange thing is that when I create the text frame and use the toolbar buttons to nudge it down on the page, the text (but not the frame) suddenly jumps to a totally different place way down on the page, despite only nudging it, say, 10 mm.
Any ideas why this is happening?
/Mats

Hi,
Partly solved:
After some tests, it seems FM does not like when you try to move a text frame over a transparent area in an image. The image in question was made by importing a PDF into Photoshop, then saving as TIF. Since the PDF contained an area that was had full transparency in InDesign (i.e. "Paper"), that area was also in the TIF image.
The strange behaviour starts exactly at the border where the transparency starts. In non-transparent areas, there is no problem.
Seems like a bug.
/Mats

Strange behaviour of .swf movies - AS2/AS3

Hello from Italy,
     this is my first post and I think I need some help from the experts...
     I am putting together an interactive Flash movie which is made of several different small movies. For the sake of clarity, I'll call them A.swf, B.swf, ..., Z.swf. The movies are launched from each other depending on certain buttons I've implemented.
     The first one, A.swf, is actually a sort of "main menu": it grants access to all the other movies and it is also the point of return from them when a certain button is pressed.
     Important: All the movies are scripted in AS3, except for the last one which, for a number of reasons, is scripted in AS2.
     The return from any (but the last) movie to the first, say B.swf to A.swf, is implemented like this:
function eventResponseSole(event:MouseEvent):void {
var myLoader:Loader = new Loader();
addChild(myLoader);
var url:URLRequest = new URLRequest("A.swf");
myLoader.load(url);
sole_btn.addEventListener(MouseEvent.CLICK, eventResponseSole);
     This is, of course, AS3.
     The last movie, which is scripted in AS2, returns to A.swf like this:
luna_btn.onRelease = function() {
loadMovie("A.swf", _root);
     The strange behaviour is this: if I launch Z.swf and navigate with the proper button up to A.swf, everything works. But if I launch A.swf, navigate to Z.swf and attempt to return, this doesn't work. There are no problems, instead, moving up and down between movies scripted in AS3, that is with the first bit of code I've pasted. My guess is that the syntax in AS2 is correct, but something stops A.swf from "launching itself" when the control is transferred to Z.swf, but the movie is launched in the original window. Is this diagnosis reasonable? And if so, would someone kindly provide a way out of this? Re-doing Z.swf in AS3 is not an option, I'm afraid, it will have to stay as it is. I also have to add I've tried some solutions by setting _lockroot, but this doesn't seem to work.
     Many thanks in advance!
     Marco Olivotto

Mixing AS2 into AS3 is not without stipulations... and I am no expert on translating those stipulations, but here is what the Flash documentation says regarding the matter... the third paragraph may be significant to your case:
- ActionScript 3.0 code can load a SWF file written in ActionScript 1.0 or 2.0, but it cannot access the SWF file's variables and functions.
- SWF files written in ActionScript 1.0 or 2.0 cannot load SWF files written in ActionScript 3.0. This means that SWF files authored in Flash 8 or Flex Builder 1.5 or earlier versions cannot load ActionScript 3.0 SWF files.
The only exception to this rule is that an ActionScript 2.0 SWF file can replace itself with an ActionScript 3.0 SWF file, as long as the ActionScript 2.0 SWF file hasn't previously loaded anything into any of its levels. An ActionScript 2.0 SWF file can do this through a call to loadMovieNum(), passing a value of 0 to the level parameter.

Strange behaviour in IMAP-Mode, seems like POP3

Similar Messages

Maybe you are looking for