Strange behaviour when using ReadOnly VO on view over DBlink

I have a very simple situation which Jdeveloper 10.1.3 cannot handle.
I have user_1 who is owner of table_1 in database_1.
I have user_2 who created and owns view table_1 in database_2. User_2 owns view table_1 which is defined as select * from table table_1@database_1.
Now in database_2 i connect as user_2. After doing select * from view table_1 i can see all data in this view
Now in Jdeveloper I have a readonly viewobject; select * from view table_1 (connect = user_2@database2) . The SQL statement is valid (Test). When testing the ApplModule I can see the data in view table_1.
When I drag and drop the datacontrol on my JSP and run the JSP I get an ORA-00942 "table or view does not exist".
What is happening here ?????
Please try to reproduce this (should be easy) and help me.
Thanks Luc Bors

O boy
Was I tired........ Got it working after a good night sleep. I had a cross reference concerning different DB connections in my ADF application.....
Thanks

Similar Messages

  • Strange behaviour when using connection pooling with proxy authentication

    All
    I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
    I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
    * User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
    * User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
    Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
    Regards,
    Chris

    Hi Chris,
    I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
    Cheers
    Greg

  • Queue with callback function - strange behaviour when using max_retries

    Hi,
    I hope someone can tell me what is wrong or can explain the following strange behaviour to me.
    I am using one queue with a registered callback function. To test the behavoiur in case of an error I tested different settings, with or without explicit exception queue and with or without parameter max_retries.
    Database Version is 11.2.0.2.   Enterprise Edition
    I enqueue 10 messages in a loop.
    I define no exception queue and do not set max_retries
    ==> all messages stay in the queuetable with q_name = AQ$_... (implicit exception queue) and retry_count = 5
    I define no exception queue and set max_retries = 4
    ==> 1 message stays in the queuetable with q_name = AQ$_... (implicit exception queue) and retry_count = 4
           9 messages stay in the queuetable with q_name = nomal queue name and retry_count = 0
    I define an exception queue and set max_retries = 4
    ==> 1 message is transfered to the Exception Queuetable with retry_count = 4
           9 messages stay in the normal Queuetable and retry_count = 0
    I define an exception queue and do not set max_retries
    ==> all 10 messages are transferred to the Exception Queuetable with retry_count = 5
    I have no explanation for the behaviour in case 2 and case 3.
    To create the queue and the callback I use this code (reduced to minimum):
    begin
       DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table        => 'TESTUSER.TEST_TABELLE'
                                   , Queue_payload_type => 'SYS.AQ$_JMS_TEXT_MESSAGE'
                                   , sort_list          => 'enq_time'
                                   , multiple_consumers => FALSE
       DBMS_AQADM.CREATE_QUEUE( queue_name  => 'TESTUSER.TEST_QUEUE'
                              , queue_table => 'TESTUSER.TEST_TABELLE'
    --                          , max_retries => 4                     uncomment this line to set max_retries
    -- uncomment the following Block to use an explicit Exception Queue
    /*   DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table        => 'TESTUSER.TEST_TABELLE_EXC'
                                   , Queue_payload_type => 'SYS.AQ$_JMS_TEXT_MESSAGE'
                                   , sort_list          => 'enq_time'
                                   , multiple_consumers => FALSE
       DBMS_AQADM.CREATE_QUEUE( queue_name  => 'TESTUSER.TEST_QUEUE_EXC'
                              , queue_table => 'TESTUSER.TEST_TABELLE_EXC'
                              , queue_type  => dbms_aqadm.EXCEPTION_QUEUE);
       DBMS_AQADM.START_QUEUE('TESTUSER.TEST_QUEUE');
    end;
    create or replace procedure test_procedure
      (context  RAW
      ,reginfo  sys.AQ$_reg_info
      ,descr    sys.AQ$_descriptor
      ,payload  VARCHAR2
      ,payloadl NUMBER
      ) authid definer
      IS
      -- für Queue
      dequeue_options   DBMS_AQ.dequeue_options_t;
      message_prop      DBMS_AQ.message_properties_t;
      message_hdl       raw(16);
      message           sys.aq$_jms_text_message;
      l_daten           VARCHAR2(32767);
      ex_hugo          EXCEPTION;
      BEGIN
        dequeue_options.msgid         := descr.msg_id;
        dequeue_options.consumer_name := descr.consumer_name;
        dbms_aq.dequeue(descr.queue_name, dequeue_options, message_prop, message, message_hdl);
        -- to provoke an error
        RAISE ex_hugo;
        -- regurlar coding
        commit;
    exception
      when others then
           rollback;
           RAISE;
    end;
    DECLARE
       reginfo1    sys.aq$_reg_info;
       reginfolist sys.aq$_reg_info_list;
    BEGIN
       reginfo1 := sys.aq$_reg_info('TESTUSER.TEST_QUEUE', DBMS_AQ.NAMESPACE_AQ, 'plsql://TESTUSER.TEST_PROCEDURE?PR=0',HEXTORAW('FF'));
       reginfolist := sys.aq$_reg_info_list(reginfo1);
       sys.dbms_aq.register(reginfolist, 1);
       commit;
    END;
    to enqueue my messages i use:
    DECLARE
      message            sys.aq$_jms_text_message;
      enqueue_options    dbms_aq.enqueue_options_t;
      message_properties dbms_aq.message_properties_t;
      msgid              raw(16);
      v_daten            clob;
    BEGIN
       message := sys.aq$_jms_text_message.construct;
       for i in 1..10
       loop
          v_daten := '{ dummy_text }';
          message.set_text(v_daten);
    -- uncomment the following line to use an explicit Exception Queue     
    --      message_properties.exception_queue := 'TESTUSER.TEST_QUEUE_EXC'; 
          dbms_aq.enqueue(queue_name         => 'TESTUSER.TEST_QUEUE',
                          enqueue_options    => enqueue_options,
                          message_properties => message_properties,
                          payload            => message,
                          msgid              => msgid);
          message.clear_properties();
       end loop;
       commit;
    END;

    Hi Chris,
    I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
    Cheers
    Greg

  • Strange behaviour when using a custom errorpage

    When I create a standard JHeadstart application using the "HR" schema, add a custom error-page and force an error on a jspx page, the following happens:
    1. Force error on page (via an incorrect commandlink)
    2. Get custom error page correctly
    3. Restart the original page
    4. Again force the error on the page
    5. In the browser "Recursive error in error-page calling for /faces/pages/CXSError.jspx, see the application log for details." is displayed.
    What is going on?
    Extra information:
    The first time the error is forced, this is logged (just after the stacktrace in the log window):
    08-apr 12:04:45 DEBUG (JhsPageLifecycle) -Executing prepareRender, page=/pages/CXSError.jspx, pagedef=null
    The second time the error is forced, this is logged:
    08-apr 12:04:50 DEBUG (JhsPageLifecycle) -Executing prepareRender, page=/pages/DepartmentsVw1Table.jspx, pagedef=null
    Environment:
    JDeveloper 10.1.3.3.0.4157
    JHeadstart 10.1.3.2.51
    Regards,
    Remco Moolenaar.
    Connexys.
    This is the constructed error on a standard JHeadstart jspx page:
    <af:commandLink action="DeepLinkFile" id="testlink"
    immediate="true" partialSubmit="false"
    text="LINK">
    <af:setActionListener from="1"
    to="#{context.setting.vacId}"/>
    </af:commandLink>
    This is the error page:
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
    xmlns:f="http://java.sun.com/jsf/core">
    <jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
    doctype-system="http://www.w3.org/TR/html4/loose.dtd"
    doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
    <jsp:directive.page contentType="text/html;charset=UTF-8" isErrorPage="true"
    import="java.io.CharArrayWriter, java.io.PrintWriter, java.util.Calendar, java.text.SimpleDateFormat, javax.faces.context.FacesContext"/>
    <f:subview id="errorpageview">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
    <title>Error</title>
    </head>
    <body>
    Stacktrace:
    &lt;pre&gt;
    <jsp:scriptlet>
    try {
    if (exception != null)
    CharArrayWriter charArrayWriter = new CharArrayWriter();
    PrintWriter printWriter = new PrintWriter(charArrayWriter, true);
    exception.printStackTrace(printWriter);
    printWriter.flush();
    out.println(charArrayWriter.toString());
    } catch (Exception e) {
    </jsp:scriptlet>
    &lt;/pre&gt;
    </body>
    </html>
    </f:subview>
    <jsp:scriptlet>
    if (exception != null) {
    try {
    session.invalidate();
    FacesContext ctx = FacesContext.getCurrentInstance();
    ctx.responseComplete();
    } catch (Exception e) {
    </jsp:scriptlet>
    </jsp:root>
    This is web.xml:
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee">
    <description>Empty web.xml file for Web Application</description>
    <context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
    </context-param>
    <context-param>
    <param-name>javax.faces.CONFIG_FILES</param-name>
    <param-value>/WEB-INF/faces-config.xml,/WEB-INF/JhsCommon-beans.xml,/WEB-INF/HRDemoService-Breadcrumb-beans.xml,/WEB-INF/DepartmentsVw1-beans.xml</param-value>
    </context-param>
    <context-param>
    <param-name>CpxFileName</param-name>
    <param-value>viewcontroller.DataBindings</param-value>
    </context-param>
    <filter>
    <filter-name>adfFaces</filter-name>
    <filter-class>oracle.adf.view.faces.webapp.AdfFacesFilter</filter-class>
    </filter>
    <filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
    </filter>
    <filter-mapping>
    <filter-name>adfFaces</filter-name>
    <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
    <filter-name>adfFaces</filter-name>
    <url-pattern>*.jspx</url-pattern>
    <dispatcher>REQUEST</dispatcher>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>ERROR</dispatcher>
    </filter-mapping>
    <filter-mapping>
    <filter-name>adfBindings</filter-name>
    <url-pattern>*.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
    <filter-name>adfBindings</filter-name>
    <url-pattern>*.jspx</url-pattern>
    <dispatcher>REQUEST</dispatcher>
    <dispatcher>FORWARD</dispatcher>
    </filter-mapping>
    <filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>ordDeliverMedia</servlet-name>
    </filter-mapping>
    <servlet>
    <servlet-name>ordDeliverMedia</servlet-name>
    <servlet-class>oracle.jheadstart.ord.html.OrdPlayMediaServlet</servlet-class>
    <init-param>
    <param-name>releaseMode</param-name>
    <param-value>Stateful</param-value>
    </init-param>
    </servlet>
    <servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>ordDeliverMedia</servlet-name>
    <url-pattern>ordDeliverMedia</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
    </servlet-mapping>
    <session-config>
    <session-timeout>35</session-timeout>
    </session-config>
    <mime-mapping>
    <extension>html</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>txt</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <error-page>
    <exception-type>java.lang.Exception</exception-type>
    <location>/faces/pages/CXSError.jspx</location>
    </error-page>
    </web-app>

    This was an application module pooling, activation / passivation issue.
    After view objects had been set-up correctly, the problem disappeared.

  • JClient - Strange Behaviour when using multiple-row-selection

    Hi!
    In my application a problem occures whenever I want to select multple rows in a JTable...
    I am using a JTable bound to a ViewObject which displays quite a lot of rows. For further processing I need to select more than one row. So I changed the code the following way:
    table.setModel(JUTableBinding.createAttributeListBinding(panelBinding, table, "SomeView", null, "SomeViewIter", new String[] {"FirstAttribute", "SecondAttribute"}));
    table.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);
    Basically there are 2 problems:
    Whenever I want to select several rows or intervals by dragging the mouse or by using cursers, older selections disappear.
    When I select rows and then use the scrollbar, all selections but one disappear.
    Is there something wrong in my implementation or is this another bug? That's one of those little things, that make life of developers and end-users hard.
    Any suggestions? Thanks a lot!

    Hi!
    In my application a problem occures whenever I want to select multple rows in a JTable...
    I am using a JTable bound to a ViewObject which displays quite a lot of rows. For further processing I need to select more than one row. So I changed the code the following way:
    table.setModel(JUTableBinding.createAttributeListBinding(panelBinding, table, "SomeView", null, "SomeViewIter", new String[] {"FirstAttribute", "SecondAttribute"}));
    table.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);JUTableBinding only works with Single-selection model as it needs to track currency based on the current selection.
    You'd have to implement a custom Table-model that wraps the built-in table model (quite like what's done in the 'table sorting example' at
    http://otn.oracle.com/sample_code/products/jdev/jclient/jclient_table_sorting_sample.html
    Then you may implement multiple selection and fake single selection model (last selected row perhaps) to the JUTableBinding's tableModel.
    Basically there are 2 problems:
    Whenever I want to select several rows or intervals by dragging the mouse or by using cursers, older selections disappear.
    When I select rows and then use the scrollbar, all selections but one disappear.
    Is there something wrong in my implementation or is this another bug? That's one of those little things, that make life of developers and end-users hard.
    Any suggestions? Thanks a lot!

  • When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

    When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
    Anyone else having this problem?

    I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
    In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
    If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

  • Incorrect Results When Using an In-Line View and User Function in 10g

    My developers are complaining of incorrect Select statement results when using an in-line view along with a user defined function. Below is the statement:
    select test_f(wo1)
    from
    (SELECT a.WORK_ORDER_NBR, b.work_order_nbr wo1/*, facility_f(A.FACILITY),
    A.PLANNER, A.WO_STATUS, mil_date(A.WO_STATUS_DATE)*, A.WORK_ORDER_TYPE,
    A.WO_DESCRIPTION
    FROM TIDWOWRK A, TIDWOTSK B
    WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR))
    where wo1 is null;
    Test_f() is a user defined function and the above query returns thousands of rows. It should return 308 rows. It is apparent that the target database is not evaluating the "where wo1 is null;" clause.
    select to_char(wo1)
    from
    (SELECT a.WORK_ORDER_NBR, b.work_order_nbr wo1/*, facility_f(A.FACILITY),
    A.PLANNER, A.WO_STATUS, mil_date(A.WO_STATUS_DATE)*, A.WORK_ORDER_TYPE,
    A.WO_DESCRIPTION
    FROM TIDWOWRK A, TIDWOTSK B
    WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR))
    where wo1 is null;
    In the above query return 308 rows. The user function was replaced by an Oracle function. The Where clause is now evaluated correctly.
    The query is executed from an Oracle 10g R2 database and retrieves data from a 9.2.0.6 database.
    I've seen a little information on Metalink. It appears that there was some trouble in 9i, but were fixed in a 9.2.0.6 patch. I don't see any information about a 10.2.0.2 database.
    Anyone have any experiences or a successful solution. I suspect that I will need to report this to Oracle and wait for a patch.
    Thanks,
    John

    I can only think of two reasons for this behaviour:
    1) You are executing these two queries from two different users and there is some policy on the table.
    2) The function doesn't do an upper, but returns null a lot of times, even when the input is a not null value, like this:
    SQL> create table tidwowrk
      2  as
      3  select 1 id, 'A' work_order_nbr, 'DST' facility from dual union all
      4  select 2, null, 'TRN' from dual union all
      5  select 3, 'C', 'DST' from dual
      6  /
    Tabel is aangemaakt.
    SQL> create table tidwotsk
      2  as
      3  select 'A' work_order_nbr from dual union all
      4  select 'B' from dual
      5  /
    Tabel is aangemaakt.
    SQL> create or replace function test_f (a in varchar2) return varchar2
      2  is
      3  begin
      4    return case a when 'A' then null else a end;
      5  end;
      6  /
    Functie is aangemaakt.
    SQL> select count(*)
      2    from ( SELECT a.WORK_ORDER_NBR
      3                , test_f(b.work_order_nbr) wo1
      4             FROM TIDWOWRK A
      5                , TIDWOTSK B
      6            WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR
      7              and a.facility in ('DST', 'TRN', 'SUB')
      8         )
      9   where wo1 is null
    10  /
                                  COUNT(*)
                                         3
    1 rij is geselecteerd.
    SQL> select count(*)
      2    from ( SELECT a.WORK_ORDER_NBR
      3                , to_char(b.work_order_nbr) wo1
      4             FROM TIDWOWRK A, TIDWOTSK B
      5            WHERE B.WORK_ORDER_NBR(+) = A.WORK_ORDER_NBR
      6              and a.facility in ('DST', 'TRN', 'SUB')
      7         )
      8   where wo1 is null
      9  /
                                  COUNT(*)
                                         2
    1 rij is geselecteerd.Regards,
    Rob.

  • Strange behaviour when looping MIDI

    Hi,
    I encounter a strange behaviour when looping MIDI:
    1) Created a new MIDI track
    2) Recorded two bars of MIDI drum track (e.g. just a bass drum with Indie Kit Live) via my EDIROL and MIDI piano.
    3) played it back: works
    4) checked the "Loop" box
    5) played it back: after the 4th repeat the drum pattern changes. either it misses two beats or does not play the bass drum but the hihat for two beats.
    I'm using Logic Pro 8.
    Can someone tell me what's going on and how this can be resolved?
    Also on some occasions I have the following behaviour:
    1) Recorded MIDI in loop mode (a few takes).
    2) Played it back: Did not produce any sound.
    3) Tried a different take from the take folder: Did not produce any sound.
    4) Tried to mute/unmute track and different take from the folder: Did not produce any sound.
    5) Tried to MIDI mute/unmute different takes from the folder: Did not produce any sound.
    6) Closed/reopened project and MIDI unmuted the take: Played fine.
    Thanks a lot for some help with those two problems.
    Alex

    Did not happen again in Logic 9 and after starting a fresh project.

  • Best practice when using auto complete in view layer

    Hello
    I have a question regarding best way to store/cash data when using auto complete function in view layer.
    I know that there will be a lot of visitors that will use this function and I dont want to kill the application server so I need some advice.
    Its about 6000 words that should be searchable .... my first thought was to create a Singleton-bean that stores current items and that I will iterate over but its a lot of "waste" doing that way.
    I would be very glad if anyone could advice me how to do this best way if there is any de-facto standard to use when using auto completion in "view layer"
    Thanks!
    Best Regards/D_S

    I dont know what your design is, but here are some ideas:
    To me, autocomplete means you have some user specific data that the user entered prevously such as their home address, and some generic data that is not specific to any particular user. I would store all that in a database. For the user specific data I would store their userID along with the data in the database. Then, when populating a JSP page, I would call up just the data specific to that user and the generic data from the database. I would store it as an array of some type in javascript client--side. When the user clicks the autopopulate button, I would have that button call a javascript fuction that reteives the data from the javascript array and populate the various textfields. All this is done client-side so the form does not have to be re-drawn. I question why you have 6000 items. Normally, autopopulate has at most only a few dozens of items. If you still need 6000 items, I suggest adding a textfield to the form to filter what the data he needs down to a manageable amount. Example: rather than get all names from a telephone book, put a textfield on the form that allowfs an end user to enter a letter a to z such as 'b', then only fetch last names from the phone book that begins with 'b'.

  • When using iphoto I can view the photos but when I double click on a photo it becomes a black box with a white circle on the screen

    When using iphoto, I can view the photos but when I double click on 1 specific photo it enlarges to a black box with a large white circle in it...doesn't matter which photo I click on the end result is the same...black box with a white circle.

    Hello michelefox17
    It's sounds like you may need to rebuild your iPhoto Library. The article below has the steps on how do that.
    iPhoto 6 and later: Rebuilding the iPhoto library
    http://support.apple.com/kb/ht2638
    If your issues persist then you may want to contact Apple Support
    Contact Apple Support
    http://www.apple.com/support/contact/
    Hope that help,
    -Griff W.

  • Strange behaviour when setting client_info and module in v$session

    Hello,
    I've tried to set the CLIENT_INFO field in V$SESSION using DBMS_APPLICATION_INFO.SET_CLIENT_INFO but found a strange behaviour.
    Normally the forms modules seems to set the field MODULE in V$SESSION to its name. If I use DBMS_APPLICATION_INFO.SET_CLIENT_INFO the CLIENT_INFO field is set correctly but the MODULE field is set to 'frmweb.exe' instead of the forms modules name.
    I also tried to set the MODULE using DBMS_APPLICATION_INFO.SET_MODULE but then strangely the MODULE and MODULE_HASH field of the original frmweb.exe (the main applet?) entry and the entry for the forms module were the same (set to the new module name). From now on every newly opened module had 'frmweb.exe' as the module entry until I closed the forms application.
    Example:
    Entries in V$SESSION:
    -- After start of forms application there is only one entry for the process:
    PROCESS           MODULE            MODULE_HASH            CLIENT_INFO
    1596:7204         frmweb.exe        854945150
    -- When a new forms module is opened it looks like this:
    PROCESS           MODULE            MODULE_HASH            CLIENT_INFO
    1596:7204         frmweb.exe        854945150
    1596:7204         my_module         1929284615
    -- When the modified forms module that sets the client_info/module is opened this happens:
    PROCESS           MODULE            MODULE_HASH            CLIENT_INFO
    1596:7204         mod_module        3097977240
    1596:7204         mod_module        3097977240             my client info
    1596:7204         my_module         1929284615As one can see the entry of the forms application seems to be overriden (at least the MODULE and MODULE_HASH fields) but the CLIENT_INFO only changes for one of the entries?
    The following code is responsible for the changes of CLIENT_INFO and MODULE:
        -- get client info
        client_info :=
            webutil_clientinfo.get_ip_address
            || ' (' ||
            webutil_clientinfo.get_user_name
            || ')'
        -- set client info
        DBMS_APPLICATION_INFO.SET_CLIENT_INFO(client_info);
        -- get module (set action to '')
        DBMS_APPLICATION_INFO.SET_MODULE(name_in('system.current_form'),''); I really don't understand, why it does not work properly.
    Any help is appreciated!
    Thanks in advance.

    This was an application module pooling, activation / passivation issue.
    After view objects had been set-up correctly, the problem disappeared.

  • Strange behaviour when placing text frame on top of image

    Hi,
    Win XP, FM 8.04
    I have a front cover that consists of a TIF image that bleeds off the page. On top of that image I want to put a text frame with the book title.
    The strange thing is that when I create the text frame and use the toolbar buttons to nudge it down on the page, the text (but not the frame) suddenly jumps to a totally different place way down on the page, despite only nudging it, say, 10 mm.
    Any ideas why this is happening?
    /Mats

    Hi,
    Partly solved:
    After some tests, it seems FM does not like when you try to move a text frame over a transparent area in an image. The image in question was made by importing a PDF into Photoshop, then saving as TIF. Since the PDF contained an area that was had full transparency in InDesign (i.e. "Paper"), that area was also in the TIF image.
    The strange behaviour starts exactly at the border where the transparency starts. In non-transparent areas, there is no problem.
    Seems like a bug.
    /Mats

  • Strange behaviour when running parameterized test

    Hello,
    I am using Flex 4.5 and FlexUnit 4.1 inside of the Flashdevelop IDE and I am experiencing some very strange behaviour.
    If I have 5 parameters to my test the test runs fine. When I add a sixth parameter of the type Array, I get the following error:
    "TypeError: Error #1009: Cannot access a property or method of a null object reference."
    Please see below for my example code.
    The following parameterized test case runs without a problem:
    package {
        import org.flexunit.runners.Parameterized;
        [RunWith('org.flexunit.runners.Parameterized')]
        public class ParameterizedTest {
            [Parameters]
            public static var testData:Array = [
                [1,1,new Array(),1,1]
            public function ParameterizedTest(
                param1:uint,
                param2:uint,
                param3:Array,
                param4:uint,
                param5:uint
            ):void {
            [Test]
            public function testOne():void {
                // Test to go here.
    When I add an Array as the sixth parameter :
    package {
        import org.flexunit.runners.Parameterized;
        [RunWith('org.flexunit.runners.Parameterized')]
        public class ParameterizedTest {
            [Parameters]
            public static var testData:Array = [
                [1,1,new Array(),1,1,new Array()]
            public function ParameterizedTest(
                param1:uint,
                param2:uint,
                param3:Array,
                param4:uint,
                param5:uint,
                param6:Array
            ):void {
            [Test]
            public function testOne():void {
                // Test to go here.
    I get this error :
    com.berog.proj_drum_machine.tests.matrix_test_suite.test_cases::MatrixConstructorTest.test One (1,1,,1,1,) .
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at flex.lang.reflect::Constructor/newInstanceApply()[E:\hudson\jobs\FlexUnit4-Flex4.1\worksp ace\FlexUnit4\src\flex\lang\reflect\Constructor.as:253]
        at TestClassRunnerForParameters/createTest()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\Flex Unit4\src\org\flexunit\runners\Parameterized.as:455]
        at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()[E:\hudson\jobs\FlexUnit4-Fl ex4.1\workspace\FlexUnit4\src\org\flexunit\runners\BlockFlexUnit4ClassRunner.as:314]
        at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()[E:\hudson\jobs\FlexUnit4-Flex4 .1\workspace\FlexUnit4\src\org\flexunit\runners\BlockFlexUnit4ClassRunner.as:152]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runners::Parameterized/runChild()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace \FlexUnit4\src\org\flexunit\runners\Parameterized.as:273]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runners::Suite/runChild()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUni t4\src\org\flexunit\runners\Suite.as:151]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runners::Suite/runChild()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUni t4\src\org\flexunit\runners\Suite.as:151]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()[E:\hudson\jobs\FlexUnit4-Flex4.1 \workspace\FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:348]
        at org.flexunit.runner::FlexUnitCore/runRunner()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\ FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:307]
        at org.flexunit.runner::FlexUnitCore/runRequest()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace \FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:283]
        at org.flexunit.runner::FlexUnitCore/runClasses()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace \FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:269]
        at Function/http://adobe.com/AS3/2006/builtin::apply()
        at org.flexunit.runner::FlexUnitCore/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUn it4\src\org\flexunit\runner\FlexUnitCore.as:245]
        at com.berog.proj_drum_machine.tests::TestMain()[E:\Actionscript\projects\DrumMachine\src\co m\berog\proj_drum_machine\tests\TestMain.as:18]
    com.berog.proj_drum_machine.tests.matrix_test_suite.test_cases::MatrixConstructorTest.test One (1,1,,1,1,) E
    Time: 0.013
    There was 1 failure:
    1 com.berog.proj_drum_machine.tests.matrix_test_suite.test_cases::MatrixConstructorTest.tes tOne (1,1,,1,1,) TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at flex.lang.reflect::Constructor/newInstanceApply()[E:\hudson\jobs\FlexUnit4-Flex4.1\worksp ace\FlexUnit4\src\flex\lang\reflect\Constructor.as:253]
        at TestClassRunnerForParameters/createTest()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\Flex Unit4\src\org\flexunit\runners\Parameterized.as:455]
        at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()[E:\hudson\jobs\FlexUnit4-Fl ex4.1\workspace\FlexUnit4\src\org\flexunit\runners\BlockFlexUnit4ClassRunner.as:314]
        at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()[E:\hudson\jobs\FlexUnit4-Flex4 .1\workspace\FlexUnit4\src\org\flexunit\runners\BlockFlexUnit4ClassRunner.as:152]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runners::Parameterized/runChild()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace \FlexUnit4\src\org\flexunit\runners\Parameterized.as:273]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runners::Suite/runChild()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUni t4\src\org\flexunit\runners\Suite.as:151]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runners::Suite/runChild()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUni t4\src\org\flexunit\runners\Suite.as:151]
        at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()[E:\hudson\jobs\FlexUni t4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ChildRunnerSequencer.as: 82]
        at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\ statements\StatementSequencer.as:141]
        at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()[E:\hudson\jobs\F lexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Stateme ntSequencer.as:109]
        at org.flexunit.runners::ParentRunner/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexU nit4\src\org\flexunit\runners\ParentRunner.as:483]
        at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()[E:\hudson\jobs\FlexUnit4-Flex4.1 \workspace\FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:348]
        at org.flexunit.runner::FlexUnitCore/runRunner()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\ FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:307]
        at org.flexunit.runner::FlexUnitCore/runRequest()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace \FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:283]
        at org.flexunit.runner::FlexUnitCore/runClasses()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace \FlexUnit4\src\org\flexunit\runner\FlexUnitCore.as:269]
        at Function/http://adobe.com/AS3/2006/builtin::apply()
        at org.flexunit.runner::FlexUnitCore/run()[E:\hudson\jobs\FlexUnit4-Flex4.1\workspace\FlexUn it4\src\org\flexunit\runner\FlexUnitCore.as:245]
        at com.berog.proj_drum_machine.tests::TestMain()[E:\Actionscript\projects\DrumMachine\src\co m\berog\proj_drum_machine\tests\TestMain.as:18]
    FAILURES!!! Tests run: 1, 1 Failures:
    Can anyone help me?

    Actually, I do see what's wrong.
    When you call a method in the ActionScript universe, you can can usually do a function.apply() and pass it a variable number of args. Unfortunately, constructors are the one type of method where this doesn't work. You can't actually do an apply() so we have to fake it by having a map of static functions which each know how to apply a given number of arguments to the constructor. There is a check in the code that tests if the number of arguments you have exceeds what our static map knows how to apply.
    It looks like that check should have thrown the error:
    throw new ArgumentError("Sorry, we can't support constructors with more than " + argMap.length + " args out of the box... yes, its dumb, take a look at Constructor.as to modify on your own");
    It didn't and I am guessing its because there is a border condition here. So, what happening is that we only support up to 5 arguments right now. That number is arbitrary. When it was written it just seemed like a reasonable number, however, this class was written before Parameterized testing was introduced.
    Your three choices right now would be to use the TestNG style of Parameterized testing, which uses functions and not constructor args so it will not suffer this same fate, change the code and compile flexunit for yourself, or we could put a patched Constructor class in your project which fixes it. Longer term, I would like you to file a bug that we should increase the number to 10 or some other quasi-reasonable number. We will never be able to support an infinite number and we will always need to pick som arbitrary line in the sand. It just seems our line should be farther out.
    Mike

  • Image quality poor when using "fit in window" view

    Hello,
    i´m getting familiar with PS CS3 Demo and what buffles me is the poor quality of the downsized view of large images. I loaded a 8 MP JPEG image from a digital camera and it looks good in 100%, but when i choose to view the whole image to fit the window (33,33% in my case), the resulting "downsampled" image is very jaggy and pixelated. I use a freeware image viewer called Xnview that gives me a far superior view when viewing large images downsized - i can even choose to select a "HQ" mode so those images get resampled to look better. It it normal that PS does not offer such a thing (or did i not see it?) and delivers such poor visual quality or is there something wrong with my PC?
    Thanks for your help.

    Though 6.735, 12.5, 25 and 50% views usually are OK too. "Image quality" is great, though sometimes deceivingly so. I guess I don't understand sampling enough to tell you why 33% looks bad (rounding errors, I suppose). But 66% makes sense. You're trying to stuff 3 pixels into the space of 2.
    Dave, what are the advantages to these nearest neighbor views instead of bicubic (or even bi-linear). Just speed?
    J

  • ORA-22275 Invalid lob locator when using CLOB from a view

    Hi,
    I am having problems when passing a CLOB from a "Union all" view to a function. I get an ORA-22275 error when trying to construct an XmlType from the CLOB and
    the CLOB originates from a view. If the CLOB originates from a table, eveyting works fine. Here is the code, that reproduces the problem
    CREATE TABLE testclob
        (field1                         CLOB)
    -- insert some data
    insert into testclob values ('<a/>');
    -- Define a clob view over some tables
    create or replace view v_testclob
    (field1)
    as
    select field1 from testclob
    union all
    select field1 from testclob; -- in reallity I use different tables
    -- Creat a functions that proceses the CLOB
    CREATE OR REPLACE
    function MyFunction(v_myClob clob) return VARCHAR2
    IS
       myXML XMLTYPE;
    BEGIN
      select xmltype(v_myClob) into myxml from dual; -- the view crashes ** HERE **
      -- code ommited
      return 'some data';
    END;
    -- Try to use the function:
    -- Selecting from a table works OK
    select myfunction(field1) from testclob;
    -- Selecting from the view crashes
    select myfunction(field1) from v_testclob;
    Error: ORA-22275: invalid LOB locator specified ORA-22275: invalid LOB locator specified ORA-06512: at "D_TEST.MYFUNCTION", line 6
    -- I using the following version:
    select * from v$version;
    -- Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production      
    -- PL/SQL Release 9.2.0.1.0 - Production                           
    -- CORE     9.2.0.1.0     Production                                       
    -- TNS for 32-bit Windows: Version 9.2.0.1.0 - Production          
    -- NLSRTL Version 9.2.0.1.0 - Production The only workaround I have found is to use substr
      select xmltype(dbms_lob.substr(v_myClob)) into myxml from dual; -- workaround.. but this mght trucnate my data.
    What am I doing wrong?
    Matej

    You need to apply the latest patchset for your version of the database on your version of the operating system:
    SQL> CREATE TABLE testclob
      2      (field1                         CLOB)
      3
    SQL> /
    Table created.
    SQL>
    SQL> -- insert some data
    SQL> insert into testclob values ('<Data>Testing</Data>')
      2  /
    1 row created.
    SQL>
    SQL> -- Define a clob view over some tables
    SQL>
    SQL> create or replace view v_testclob
      2  (field1)
      3  as
      4  select field1 from testclob
      5  union all
      6  select field1 from testclob
      7  /
    View created.
    SQL>
    SQL> -- Creat a functions that proceses the CLOB
    SQL>
    SQL> CREATE OR REPLACE
      2  function MyFunction(v_myClob clob) return VARCHAR2
      3  IS
      4     myXML XMLTYPE;
      5  BEGIN
      6
      7    select xmltype(v_myClob) into myxml from dual; -- the view crashes ** HERE **
      8    -- code ommited
      9    return 'some data';
    10  END;
    11
    12  /
    Function created.
    SQL> -- Try to use the function:
    SQL> -- Selecting from a table works OK
    SQL> select myfunction(field1) from testclob;
    MYFUNCTION(FIELD1)
    some data
    SQL>
    SQL>
    SQL> -- Selecting from the view crashes
    SQL> select myfunction(field1) from v_testclob;
    MYFUNCTION(FIELD1)
    some data
    some data
    SQL> disconnect
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.7.0 - Production
    SQL>

Maybe you are looking for

  • Severe Windows 7 on Bootcamp problem

    Hello. I've had my Macbook Pro for about 3 weeks now, the Mac OS itself is great, no problems there; however, I have installed Windows 7 via bootcamp for specific incompatible games and other things. Now I notice a HUGE problem going on when using wi

  • How to parse XML and store the data in  tables using sql or plsql?

    I want to parse the xml <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <xmlListWrapper>     <size>2</size> <AppTypeID>10</AppTypeID> </xmlListWrapper> and store in a table |pk|apptypeid| 1     10

  • Migrating a 2009 mini to a 2013 macbook pro

    I want to migrate my licensed applications from a 2009 mac mini to my new 2013 macbook pro. What is the best method? firewire 800 to ethernet, or firewire 800 to thunderbolt? Or should I just manually reinstall all of these applications from scratch?

  • Change/ Add screen in Group Box specify tab layout for Asset master Record

    Hi All, I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box. Thanks & Regards, Pankaj

  • Command issue in smartform main window table footer

    Hello Experts , I got an issue , that really puzzled me ! hope you could help . In my smart form main window I have a loop node inside loop node is a table , and there is a footer in this table node. in footer event , I only set check box 'at page Br