Strange Error Saving Qry in Query Designer

I am getting a strange error when saving a BEx query.
The error looks like:
Formal error in table: CON, IOBJNM: 1SORTINFO, field: CONTYPE, value: 5
If I go ahead and save this and run it using RSRT I get the error a bit more detailed:
Message Text
Formal error in table: CON, IOBJNM: 1SORTINFO, field: CONTYPE, value: 5
Technical Data
Message type__________ E (Error)
Message class_________ BRAIN (Messages: BRAIN)
Message number________ 450
Message variable 1____ CON
Message variable 2____ 1SORTINFO
Message variable 3____ CONTYPE
Message variable 4____ 5
It happens on miscellaneous cubes, multi-providers, and even dso. However, some objects I don't get the error.
My scenario for duplicating this error is:
1) create new qry, select cube or multi-provider
2) drag a char into the rows
3) drag a key fig in the cols
4) press the "qry check" link
ERROR appears.
All these objects are activated.
It must have happened during our change to 7.0 enh 1, but only ocurrs in our DEV and SND systems, QA, and PRD are fine.
Anyone see this before?
Mike

Hi Mike
You might try from your colleagues system who has different version of BEx .
Please go through the below notes
https://service.sap.com/sap/support/notes/1606482
https://service.sap.com/sap/support/notes/1487507
Regards
Anindo
Edited by: Anindya Bose on Dec 5, 2011 2:20 AM

Similar Messages

Error While Logging in Query Designer`

Hi all
We recently upgraded our system to BI7.0, I am trying to open Query designer, I am getting this error "terminate: the BW server has deactivated this version of Query Designer".......can anyone suggest valuable pts why I am getting this??

The error is happening because the bex version is restricted to 3.x in server.
You can check it in t-code RSZVERSION. Here you will be able to maintain minimum and maximum version which we can use for designer and analyzer.
This is done because the 3.x queries if opened and saved in 7.0 version, cannot be reverted back.
check the OSS note 582944 which may help you.
workaroud for this is dont click OK on the pop up of error message. you will be able to work on the query.
the designner will close only if you click ok on the popup.
Hope this helps,
Sri....

Giving Error while opening BEx Query Designer.

Hi all,
               A user is trying to open BEx Query Designer 7.0 and she is getting this error
" SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were middle of something, the information you are working on might be lost. "
She is not having issues while opening BEx Analyzer. She is having Office 2010. This doesn't seem to be compatibility issue with the Office. This BEx was not installed on her machine 2 weeks back and it was working fine until now.
As a first re-solution i told her to get it re-installed but still she is getting the same issue.
Thanx.

Hello,
There is no relation between Office VS Query Designer. Only with BEx Analyzer and MS Excel.
My suggestion is.
If you don't have version 7.20 of SAPGUI and Business Explorer, please download the installer.
After that, download the latest patch available and install:
http://service.sap.com/swdc
> Support Packages and Patches
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Win32
_ > * gui720_5-10007878.exe
   | > BI ADDON FOR SAP GUI
   | > BI 7.0 ADDON FOR SAP GUI 7.20
   |_ > * bi720sp03p_301-20006596.exe
   |
   | > BI ADDON FOR SAP GUI
   | > BW 3.5 ADDON FOR SAP GUI 7.20
   | > Win32
   |_ > bw350gui720_5-20006857.exe
If persist, let me know.
Cheers
Edward John

Error in netweaver BI query designer

Hi, When we login into BI3 and select Query designer it shows error as given in attached document. I have checked all the services and restarted it bbut still doesnot work. Kindly advice what exactly can be done for this. With Regards

Hi
1. What is the version of SAPGUI & patch?
2. Have you enable the IE 8 Compatibility view settings? kindly follow the link
https://fortress.wa.gov/ofm/bass/basspr/library/Instructions_on_how_to_switch_IE8_to_compatibility_mode.pdf
BR
SS

Run-time error 438 at BW Query Designer

Hello experts,
I get run-time error 438(object does not support this property or method) message when trying to execute BW Query Designer.I get this message after entering user name and password and press enter.
(SAP Gui version is 7.1 and my windows version is Vista Home Edition.)
What do you recommend me to solve this problem?
Best Regards,
Kevser Aydin

Hello experts,
I get run-time error 438(object does not support this property or method) message when trying to execute BW Query Designer.I get this message after entering user name and password and press enter.
(SAP Gui version is 7.1 and my windows version is Vista Home Edition.)
What do you recommend me to solve this problem?
Best Regards,
Kevser Aydin

SQL Error 207 when using Query Designer

Hi experts I hope you can help me out with this it is urgent!
I am crating a Query on the query designer NW04s, when I add a column from my info provider I get the following error:
CX_SQL_EXCEPTION Occurred (program: cl_sql_statement========cp etc.
I check the WP log and I found this:
C Wed Jan 31 10:22:59 2007
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'TXTMD'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'TXTSH'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'LANGU'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'CURRENCY'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 100. stmt: [select [S00].[CURRENCY] AS [0000000023] , [T00].[TXTSH] AS [0000000
C /* R3:CL_SQL_STATEMENT==============CP:399 T:/BI0/SCURRENCY */
C ]
C Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
C dbdsmss: DBSL100 SQL207
C Invalid column name 'CURRENCY'.Invalid column name 'LANGU'.Invalid column name 'TXTSH'.Invalid column name 'TXTMD'.
B ***LOG BY2=> sql error 207 performing OPC [dbds#1 @ 482] [dbds 0482 ]
B ***LOG BY0=> Invalid column name 'CURRENCY'.Invalid column name 'LANGU'.Invalid column name 'TXTSH'.Invalid column name 'TXTMD'.
B ***LOG BY1=> sql error 207 [dbacds#2 @ 1422] [dbacds 1422 ]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'TXTMD'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296940022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'LANGU'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296940022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'UNIT'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296940022803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 100. stmt: [select [S00].[UNIT] AS [0000000008] , [T00].[TXTMD] AS [0000000008_
C /* R3:CL_SQL_STATEMENT==============CP:399 T:/BI0/SUNIT */
C ]
Dont know what is going on,
Regards,
Alejandro.

Hi Its quite difficult to analyze,however are you on latest FEP SP 11??
if not try downloading from
service.sap.com/swdc>Download>support packages and patches>Ebtry by application component>Support Packages and Patches" SAP Frontend Components" SAP GUI FOR WINDOWS" SAP GUI FOR WINDOWS 6.40-->Win 32
for 3.x front end bw350_11-10001615.exe
for Nw2004s front end - Bw700SP11_1100-10001615.exe
Hope it Helps
Chetan
@CP..

Formula Variable Error in BI7.0 Query Designer

Dear All,
I am getting the following error when using a formula variable with replacement path. Please help me on this.
we are using BI7.0 SP level 13
ABEND: Variable D30TEST0UIF40OXY0A5JZFO40 (D30TEST0UIF40OXY0A5JZFO40) does not exist or is incorrectly used 5OTGNQ295YVYORGW5NOBJ9NUP
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Query ZFIGL_O02_Q002_7 could not be opened.
Error when generating dataProvider
Best Regards,
SGK

Hi Vikram
It didn't seem relevant to my case but I downloaded it and it solved my issue.
Thank you very much
Shlomi

Saving Queries in Query Designer

Hi All,
I was just wondering if it is possible to save queries without having to assign a transport where it will be attached.This is considering that that standard transport system in BW is deactivated.
Thanks a lot.
Shella

until you change the object package to something other than $tmp they will be stored locally. When you are ready to transport I follow these steps.
Change package (create transport request)
release the transport request from above
collect the object
create transport request and tranport it.
From this point on you need an open transport to edit the object since you have changed the package.
Richard

Error while executing query in query designer and RSRT.

Hello All,
At none of the places (BI--> RSRT or via query designer GUI) my query is executing properly .
At RSRT the error message ---
At Bex Query designer the error msg--
Checked the data at the sales-infocube level , the data is absolutely ok.
Regards
Deblina

Hi,
Have checked both the places, backend cube as well as the filter conditions of the query ,everything is in sync.
to make the query more simple i have removed the charateristics restrictions then ran the query , but still getting the same error.
Am just attaching the screenshot of the query layout, for your reference.
Regarding connectivity to access the portal, how it can be established.
Many Thanks
Regards
Deblina.

Query Designer - Query:Specialist Group Status

Hi Gurus,
One of my BI user is getting error in this:
In Query Designer - Query:Specialist Group Status
"Registered JIT debugger is not avialable. An attempt to launch a JIT debugger with the following
command resulted in an error code of 0x2(2). please check computer settings.
cordbg.exe !a 0x289c"
but when I tried with SUPER USER access i am not getting above error.
Guys please suggest me asap
Thanks
sahad

hello,
Check the variabledefinitions of the query.
Try RSRT and 'execute and debug'.
It might be you get a lot more detailed information about the problem.
see OSS note 961995.
Regards,
Dhanya

Query Designer crashes when using 0CALWEK

Hi all
I have come accross an error when using the query designer in BI 7.0. If i try to restrict on 0CALWEEK the Query Designer first tells me there are errors but none show, then tells me there are no values for 0CALWEEK and finally crashes saying
"An unhandled exception has occurred in your application."
"Object reference not set to an instance of an object."
After this the desiger freezes and must be exited.
On occasions an RFC error shows on the botton of the design view suggesting a check of the RFC logs, however nothing appears in the RFC log.
Any assistance would be very much appreciated.
With Thanks
Gareth

Anil
Generating in RSRT does not fix the problem.
Checking the query designer shows no errors, however once we get the crash after attempting to restrict on 0CALWEEK it is not possible to use the check button (since the whole of query designer freezes).
This is happenning on our development system (the only one on which we are currently creating queries) and on all PCs.
The note, unfortunately, refers to an issue when using gui 7.X, however we are using 640 so it should not be a .net framework issue however i am asking my BASIS team to do some testing on that.
Many thanks for your suggestion though.
Any other ideas?
Regards
Gareth

Error while trying to Open and Delete a BEx Query in Query Designer.

Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
Chandu

Arun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu

Error while opening a query in query designer

Hello all,
There is an issue with the BEx Query Designer. A user is facing the following error while he tries to open a query using the Query Designer.
Error:
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to SAP gateway failed
Connect_PM GWHOST=10.233.0.167, GWSERV=sapgw00, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.233.0.167:3300' not reached
TIME        Wed Nov 26 16:35:58 2008
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        2985
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     1
Please help me in resolving this issue.
Regards,
Shahid Ahmed.

Connect to SAP gateway failed
You cant connect to gataway, may be it's down to (if you have
some issues going on the server
Regards.

Error publishing Query designer report to Web

Hi all,
I am facing error after executing the query in query designer in BI 7. The query fails to open in web and points to standard url:
http://portal-dmb.wdf.sap.corp:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=EX4_TBW20&VARIABLE_SCREEN=X&DUMMY=7
"Link appears broken"
Initially I have configured the web connectivity using the How to guide and carried out config in SMICM as well as SICF (activating BW node). If I enter the url from SMICM manually in IE, it would prompt for user/password for BI server and successfully logs on.
The issue only lies when publishing query from Query designer to web. Please advise if I have missed out some config here.
Thanks.

Hi,
check this notes/links if you have done all steps:
SAP NetWeaver 2004s: Setting Up BEx Web
SAP Note Number: [917950|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393137393530%7d]
[Setting up BEx Web - Short Track|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e]
BI 2004s: Checking Java Connections Web Application Designer
SAP Note Number: [989525|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393839353235%7d]
Regards
Andreas

Error while trying to change or save as query in query designer

Hi ,
When we are trying to change or do a save as to a query in the query designer,it is giving us an error stating"'An unexpected object variable or with block variable not set'error occured in wdbrlog 1 error(s) are logged".
We have searched in SDN for the same error and found some OSS notes(Notes 571831,575434) should be implemnted but those notes seem old.We are using BI 7.0 version.
Could anyone please suggest??
Thanks,
Bhagyarekha.

What is your front end SP level ?

Strange Error Saving Qry in Query Designer

Similar Messages

Maybe you are looking for