Strange issue in updating custom table after upgrade ECC6.0! Please help!

Hello everyone:
    I have some code (shown below) that deletes and updates some SAP tables and one custom table:
    DELETE T5UBV   FROM TABLE DEL_T5UBV.
  DELETE ZCHRZIP FROM TABLE DEL_ZCHRZIP.
  MODIFY ZCHRZIP FROM TABLE WRITE_ZCHRZIP.
  MODIFY T5UBV   FROM TABLE WRITE_T5UBV.
COMMIT WORK.
For SAP table the code above works fine but for custom table it overrides all exisiting data! It should keep some existing data in custom table ZCHRZIP and append any extra data from internal table WRITE_ZCHRZIP. This functions as designed if I run in fore ground but in background it just overrides instead of modifying and appending! This is happening only after upgrade ECC6.0. Any thoughts? Please let me know.
Thanks.
Mithun

Mithun,
Comment below code
DELETE ZCHRZIP FROM TABLE DEL_ZCHRZIP.
<b>Reward if it helps,</b>
Satish

Similar Messages

  • I lost some of my contacts after upgraded to ios6, please help!

    I lost some of my contacts in my iPhone 4S after upgraded to IOS6, please help!

    Backup is your best option if you have one. Reverting software will not bring the contacts back.

  • My macbook pro run slowed after upgrade to Yosemite, please help!

    Why my mac slowed after I upgrade to Yosemite, Please help!

    You might want to update your profile. Helps people trying to help you.
    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • N95 hang after upgraded to v30, please help

    Hi,
           I upgraded my N95 using Nokia Software Updater to v30, NSU shown updated completed. After power down the phone and powe up again, the N95 unable to power up and show the "NOKIA" logo only.
          I removed the baterry and power up again, it only showing the "NOKIA" logo only, pleae help.
    Thanks,

    Try booting it without the memory and sim card in.
    If that fails to work try the hard reset which will revert it to a fresh out of the box state with all data wiped.
    Hard reset:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
    3. While holding these buttons, hold the power button for a second to switch on the phone.
    4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
    It may take a few attempts and very flexible fingers.
    If that still fails then your only option is the nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • PowerBook G4 17 won;t start after upgrading Hard disk Please help!

    Hi Folks! need your help in order to diagnose aPowerBook G4 1Ghz Serial V731556CMVZ. It worked perfectly untill start to have problems with hard drive. I bought a new Seagate Momentus 7200RPM and followed the instructions ifixit.com without any problem.
    After finishing, the PowerBook won't start. I can not hear any noise form HD, or SuperDrive, no startup chim sound.
    I disasembly and assembly again the PB and nothing. I try to reset PRAM SHIFT CTRL ALT POWER and nothing.
    It's frustrating. Please Help!

    I would make sure the keyboard ribbon is squarely seeded and in the right position. That clip is extremely tiny and fragile. Any damage to it whatsoever could cause major issues. Did it fracture at all during the installation process?

  • Drivers are somehow missing after upgrading iTunes. Please help

    I have had this problem for months now and have just dealt with it, but after getting a problem fixed with my iPod Classic, I thought now would be the right time to finally find out something about this and maybe get the problem solved...
    When upgrading my iTunes version, the install seems to go fine, but about halfway through the install process I lose my internet connection... the new iTunes will install completely and work fine, but from the time I lose the internet connection, Windows is unable to find any networks because somehow the drivers for my network adapter seem to be missing...
    The only thing I've been able to do to get my internet connection/drivers back is to use System Restore and restore the system to a few days back, and of course go back to the old version of iTunes. I've probably tried upgrading 10 times or more since the first time this happened as more updates are available, but the same thing happens every time... It would be nice to update, since I've been having a few issues with iTunes lately that upgrading might help fix (maybe?), but if it means choosing between an internet connection and a newer version of iTunes, then of course I'm not upgrading.
    Can anyone tell me why this is happening and what I can do? Thanks.

    The problem is still there with iTunes 9, and nobody has even attempted to answer my question... My mom "accidentally" installed the upgrade again this morning, and I almost missed my online class because I had to restore the computer. Can anybody tell me anything? Or am I just stuck ignoring the update windows and using an old version of iTunes forever? Half the pages on the store tell me to upgrade to see the content, and it's really, really annoying me. Next, I probably won't even be able to sync my iPod without it telling me to upgrade, and I can't...

  • I can't access Windows 7 through Bootcamp anymore after upgrading to Lion, please help

    Hi All.
    I just recently upgraded my operarting system to the new OS X Lion. I had Windows 7 running through Bootcamp. Now every time i try and start windows like I used to, the computer restarts but then i get a black screen with text on the top left saying something like "no system disk". What i'm saying is that i cannot get into windows anymore since I upgraded. Anyhelp will be highly appreciated please

    It shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution

  • Photo stream not working after upgrading to maverick please help?

    have upgraded to Maverick from osx lion
    sooo much trouble ......memory low
    photo stream not working
    everything slow
    any ideas?

    On your Mac disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • Lost photo library after upgrade to Lion -- please help me find it?

    I have just upgraded to Lion, and started setup for iCloud.
    I can't find my photo library on my Mac. 
    I tried upgrading to iPhoto 9.2, but the install didn't work -- got stuck on "searching for photos"
    The photos do appear in iPhoto, but not in the library?
    My backups on a separate hard disk may be ok, but I thought the library used to have the list of photos.  All I can see is the icon.  I hesitate to open anything, as I don't want to lose all of my photos....
    Please advise.

    The photos do appear in iPhoto, but not in the library?
    Please explain.  iPhoto displays photos from the iPhoto library - if you have photos in iPhoto then you have an iPhoto library
    Are you trying to access your photos? You do not do that directly into the iPhoto library - that has never been a support access method - you use the media browser
    What exactly are you trying to do?
    LN

  • Not Updating Customized Table when System having Performance Issue

    Hi,
    This is actually the same topic as "Not Updating Customized Table when System having Performance Issue" which is posted last December by Leonard Tan regarding the user exit EXIT_SAPLMBMB_001.
    Recently we changed the program function module z_mm_save_hide_qty to update task. However this causes more data not updated. Hence we put back the old version (without the update task).  But now it is not working as it used to be (e.g. version 1 - 10 records not updated, version 2 with update task - 20 records not updated, back to version 1 - 20 records not updated).
    I tried debugging the program, however whenever I debugged, there is nothing wrong and the data is updated correctly.
    Please advise if anyone has any idea why is this happening. Many thanks.
    Regards,
    Janet

    Hi Janet,
    you are right. This is a basic rule not to do any COMMIT or RFC calls in a user exit.
    Have a look at SAP note 92550. Here they say that exit EXIT_SAPLMBMB_001 is called in the update routine MB_POST_DOCUMENT. And this routine is already called in UPDATE TASK from  FUNCTION 'MB_UPDATE_TASKS' IN UPDATE TASK.
    SAP also tells us not to do any updates on SAP system tables like MBEW, MARD, MSEG.
    Before the exit is called, now they call 'MB_DOCUMENT_BADI' with methods MB_DOCUMENT_BEFORE_UPDATE and MB_DOCUMENT_UPDATE. Possibly you have more success implementing the BADI.
    I don't know your situation and goal so this is all I can tell you now.
    Good luck!
    Regards,
    Clemens

  • Best way to update custom table

    Hello experts,
    Iu2019m writing a report program and after pulling data from a custom table Iu2019m modifying certain fields within internal table and then eventually update custom table. The way Iu2019m updating custom table is working fine. However Iu2019m concern about performance issues because Iu2019m doing update on custom table within loop.
    Here is my code for reference.
    *&      Form  update_contracts
          text
    -->  p1        text
    <--  p2        text
    FORM update_contracts .
    Update record in an internal table first
      loop at izsc_compliance into wa_zsc_compliance..
        wa_zsc_compliance-zapproval = c_accepted.
        wa_zsc_compliance-CHANGED_DT = sy-datum.
        wa_zsc_compliance-CHANGED_TM = sy-uzeit.
        wa_zsc_compliance-CHANGED_BY = sy-uname.
        modify izsc_compliance from wa_zsc_compliance index sy-tabix.
        write:/ sy-tabix, wa_zsc_compliance-vbeln_new, wa_zsc_compliance-zapproval.
        if p_test is initial.
          move wa_zsc_compliance to zsc_compliance.
          update zsc_compliance.
        endif..
      endloop.
    Write records to database
      if p_test = 'X'.
        skip.
        write:/ 'Test mode'.
      endif.
    ENDFORM.                    " update_contracts
    Iu2019m not certain if there is any better way by not doing update within loop and update custom table outside this loop.
    Many thanks in advance.

    Hi,
    Yes, there is a better way to update the custom table. That will be more performance oriented and will be a much cleaner approach. As, I am not much aware of the custom table structure which you have in your program, the best way that I can suggest is to remove the update statement from that check. I guess you are checking against the mode - test or production. Once you have done the check, put the selected entries in an internal table which is same as database table. And then in a single command - a single array operation as it is commonly called, you can update the custom table.
    Have a look at the following link
    [Overwriting Several Lines Using an Internal Table|http://help.sap.com/saphelp_bw33/helpdata/en/fc/eb3a94358411d1829f0000e829fbfe/content.htm]
    [Inserting or Changing Lines|http://help.sap.com/saphelp_bw33/helpdata/en/fc/eb3ac8358411d1829f0000e829fbfe/content.htm]
    You can also scan the forum for multiple links and references and sample examples.
    Hope this will help. The above approach will be much more performance oriented and will help to optimize. Also, check where exactly you are providing the locking feature if at applicable in your business functionality.
    Regards,
    Samantak.

  • Need MIGO BAdi to update custom table

    Hi Experts,
       I have to update a custom table after the GR is successful against PO in MIGO transaction.
    Which BADI will be suitable to this. Or is there any other way to do this?
    Thanks and regards,
    Venkat.N.

    Hi,
    You can use the badi MB_DOCUMENT_BADI and method MB_DOCUMENT_UPDATE.
    Regards,
    Nagaraj

  • CVC creation - Strange issue with Master data table of 9AMATNR

    Hi Experts,
    We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
    We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
    Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
    /BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
    Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
    Your expert comment is valuable to us. Thanks.
    Best Regards,
    Chandan Dubey

    Hi Chandan,
                 Try to use a WAIT statment with 5 seconds before your select statment.
    I'm not sure whether this will work. Anyway check it and let me know the result.
    Regards,
    Siva.

  • I can't update my apps after upgrade to iOS 6...?

    I can't update my apps after upgrade to iOS 6

    Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
    Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
    Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

  • R12 - Approach to Insert into custom table after payment is done

    Hi,
    I have a requirement to insert into a custom table after invoice payment in R12. Code units are already in place to load data from ap tables to custom one.
    I have identified 2 ways in which this can be done:
    1. Call from the business event oracle.apps.ap.payment
    2. Call after the program 'Send separate remittance advice' completes, again as a business event after the concurrent program completes i.e. to use 'Request Completed' business event.
    My questions are as below:
    1. Is there any other way in which I can write to a custom table after payment is done
    2. How else can after report trigger be fired for SRA in R12 (without customizing the standard SRA java conc pgm)
    3. When exactly business event 'oracle.apps.ap.payment' will be fired? Will it be fired for all payments irrespective of the way payment is done like thru PPR, payment workbench, etc?
    Please share your thoughts on this.
    Thanks,
    Kavipriya

    in our case, we have created a database trigger on IBY_PAY_INSTRUCTIONS_ALL, to insert the requisite data into custom tables whenever the payment status is "Ready for Printing"

Maybe you are looking for