Strange issue with Notes For Approval field

Hi All,
Scenario one:
While creating the shopping cart , in step3 screen there appers s a label Notes For Approval
but the inputfield next to it was disabled and the creator can not enter any remarks in it.
Login as approver , click on Approval link, click the magnifying glass icon in approval table.In the detail view , in lower part of screen under Additional Specifications tab thers is Add Note button .On clicking this button nothing happens , i mean no new text field appears on the screen for enetering remarks by the approver while approving or rejecting the cart.
Due to above mentioned issue i modified the template SAPLBBP_SC_UI_ITS 140 of BBPSC01 as follows.
`T D(class="data")`<text area styl e="font-family:arial;font-size:11px;" na me="TEXT_LINE:66[]" cols="66" ro ws="6" wr ap="physical" titl e="`#APPR_INFO`">`rep eat with r in TEXT_LINE;write (r, "\r\n");end`</te xtarea>
the code above was commented in the template , i uncommented it . After this modifications while creating the shopping cart in step3 screen , a new textfield appeared next to the disabled textfield .
Also in approver login , on clicking the Add Note button a textfield started appearing next to the disabled inputfield.
But in approver login this textfield alwasy contains a default text .Only this deault text is visible in the creator's check status of this shoping cart.
Scenario Two
Aftre modifying the template a new textfield appears next to the disabled inputfield while creating the shopping cart , if we enter some text in this textfield and order the shopping cart then in the approval login on click of Add Note button two text fields appear otherwise only textfield appears.
How to enable the standard textbox without modifying the template.
I know the things I am trying to desribe are very complex but hope some one could help me on this.
Please guide me on this.
Regards,
Anubhav

Hi Swati,
Looks like the template was modified beforw I started working on it.I compared the template code in dvelopment with previous version and found some lines were missing , copied the missing lines and now it is working fine.
Thanks a lot for the help,
Anubhav

Similar Messages

Issue With Notes for Approval

Hi SRM Gurus,
The problem we have with "Notes for Approval" at the bottom of SC is whenever some one adds a Note to this section it is not getting properly aligned for example see below for how finally all notes look like after Notes being added by Approvers
Notes for Approval
This is Notes Test3:
This is the Note from :AOGRAN On 27.02.2008:
FHANK On 02/26/2008:
CBRITT On 02/26/2008:
In the above CBRITT has added the first line "This is Notes Test3: " but the note is shown at the beginning and his ID and time stamp are at the bottom.
Is there any way, both can be combined together in one line side by side ??

Hi Swati,
Looks like the template was modified beforw I started working on it.I compared the template code in dvelopment with previous version and found some lines were missing , copied the missing lines and now it is working fine.
Thanks a lot for the help,
Anubhav

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

Hi all,
we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
Exchange Server.
We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
Timestamp Sender Recipients MessageSubject
25.02.2015 16:48:52 [email protected].. {}
25.02.2015 17:04:43 [email protected].. {}
25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
25.02.2015 17:13:45 [email protected].. {}
25.02.2015 17:13:55 [email protected].. {}
We can still reproduce the issue on different Mac computers.
Thanks for any help in advance!
Thanks and best regards
Reto

Here is the mailheader form the successfully sent email:
Date: Wed, 25 Feb 2015 17:08:25 +0100
Subject: test 3
From: sender <[email protected]>
To: "'[email protected]'" <[email protected]>
This mailheader is from an email which was not sent out:
User-Agent: Microsoft-MacOutlook/15.6.0.150113
Date: Wed, 25 Feb 2015 16:48:52 +0100
Subject: test 1
From: sender <[email protected]>
To: [email protected] <[email protected]>
Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

Issue with the new COPA field added into the BBSEG Structure

Hello All,
I have an issue with the new COPA field added into the BBSEG Structure.
I think its added becuase of test Operationa Conern Created by somebody.
Can you please let me know how to remove that structure from BBSEG Structure.
Thanks
vsr

Hi Monohar & Ankur,
Thanks for your answers..
main issue is suddenly new field called RKE_COPA_KOSTL has been added to the BBESG Structure..
Because of this RFBIBL00 Upload is not working. I heard that this new fields will come by generating Operating Concerns by Transaction KEA0.I found an operating concern which was created as a test in developemt system..
But I am not sure how to delete that operating concern.Even i am not sure if we delete the Operating Concern ..is it going to delete that field in BBESG Structure or not??
Please advise me..
Thanks
sathi

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

Strange issue with external monitor, only working when external speakers plugged in

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Hello cgoldberg11
Please go to the below link to test if you are having a speaker hardware failure.
Testing for Hardware Failures (Windows 7)
This will rule out hardware failure, let me know how that goes.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
Reguards,
Mo

Strange issue with Spry Accordion Panels

Hi, I'm having some strange issues with the Spry Accordion
Panels.
Here is the page:
http://www.bellaclientcenter.com/browncollege/aboutus.html
For some reason when I preview this message it adds extra
characters to the url above, so just delete those off to see the
correct url.
The only browser this does NOT happen in is safari, I'm
seeing it all of my other browsers. You'll notice when you first
load up the page, you'll see that the active panel header
background is green, and the non active is a dark grey. But when
you click one of the other panels they all turn a strange neon blue
color. This is very apparent in firefox.
Any thoughts on this? I've attached the spry css code in case
the problem is there.
thanks so much!!
Jeff

That is because your page is currently invalid. And renders in IE quirksmode..
<base href="http://www.industrialwebsearch.com/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
So make sure your page is valid, and the animations will go smooth in ie

Strange issue with left mouse clicking freezing other inputs on the Mac

I'm having a strange issue with my game. I'm using Flash CS6 and a Mac.
I've got a character that I move around the screen with keys, and you can click the left mouse button to make him throw something. The weird issue is when I click the left mouse button a lot, it seems to stop any other inputs from coming in, so for example, if I hold the right arrow key down while I'm doing a left clicking, and then let go of the right arrow key, the character will keep on moving right for a few seconds, until it finally get's the key_up event and stops.
Even not using any mouse event handlers, so the mouse is doing nothing in the game still causes the key inputs to be delayed just by left clicking, any ideas?
I've just tested the .swf on a PC and there was no problem, the mouse clicking was not causing any issues, so it's something peculiar to the Mac.

Hi,
This could be an issue if you were using Safari 5.1+ in 64bit mode. This should go away if you run Safari 5.1+ in 32 bit mode. You can change this by
1. Go to /Applications
2. Find Safari->RightClick->Get Info->Check 'Open in 32-bit mode' check box.
3. Relaunch Safari 5.1 again.
Thanks!
Mohan

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Strange issue with USB mouse and USB headset.

Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?

I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Strange interaction with XHTML For Digital Editions

Hi all,
I have written a scripted plugin with menuItems for Indesign CS4.
This scripted plugin is interacting in a strange way with XHTML
For Digital Editions. In my plugin there is a menu item that exports
Indesign content to XML. When using this function an error is
generated sometimes:
error number 30476.
The requested action cannot be processed because the object is no more existing.
C:\Program Files\Adobe\Adobe Indesign CS4\Scripts\XHTML For Digital Editions\6
Line:381
There is a startup script to load my plugin and it uses a targetengine.
How can it be that my plugin is interacting with "XHTML For Digital Editions"?
Suggestions to solve this problem are very welcome.
Kind regards,
Michel

Michel,
to reduce confusion let's call a script a script rather than plugin, even if it is delivered as jsxbin.
Isolation into a target engine is good, but the target engine is not at all indicated by the error message, so do not assume this is an issue.
The error is about a strange file "6" containing at least those 381 lines, which during initial execution (when its functions were defined / installed) was located within that XHTML for Digital Editions subdirectory. If there is no such file, it could already be removed when the error pops up, who knows. That is, unless InDesign lies about the source file, but I have never heard of that.
It would now be good to know who created that presumed temporary file containing 381 lines of executable code, e.g. by accidentally using a wrong path. One possibility is the implicit reference to the "Folder.current" variable by a relative path - do you use relative paths anywhere? Folder.current is explained in JavaScript Tools Guide available from ESTK Help.
It would also be good to know whether your script uses try-catch brackets in all its entries (menu callbacks or other handlers), or why not. If this is new to you, this way you can intercept any system error message like the quoted one which is a very generic one, and add your own comments such as "while performing this/that task" or other context information. You could then also recover gracefully from any errors such as a stale references to a deleted object. For the beginning though, you can at least find out whether the problem is at all within your code.
It is also generally good practice to have an option ready in source code that produces an exhaustive log file for any general steps but also caught error messages. It is not like walking around with a debugger, but you can find out the call chain and general area of code involved when the dreaded dialog pops up again.
Finally if it is the same problem as mentioned by Ralf, you should better get in direct contact with him - this forum has a personal mail feature and probably both of you have a phone ;-) .
Dirk

Strange issue with Notes For Approval field

Similar Messages

Maybe you are looking for