Strange module problem, modules not found

Hi!
Not sure if thois is the correct area but anyway...
I have a really strange problem loading modules:
Sometimes when booting it can't find my modules, in most cases (but not all) I have done a unclean shutdown so fsck needs to run (but it have happened at other times as well).
And even if fsck pass without any problem I still have the same problem, even when trying to reboot a second time (clean shutdown).
The only fix is to re-install kernel26 (and hope I still have it in the cache).
Possibly related problem:
I can only manually load modules by giving the whole path.
Am I missign some setting?
Some other setup problem anyone can think of?
Any tip on what I need to check?
BR,
Mårten
Last edited by Maos (2009-01-18 18:57:25)

sudo pkgadd -d . SUNWcsu helped!

Similar Messages

Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
It says that module Puma15Top was not found.
But this module is a NI property and is automatically compiled by NI Compiler.
The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
Does anyone have any idea how to solve this problem? Or have you experienced some like this?
Following error log:
### XstSynthesis ###
Puma15Top
Reading design: Puma15Top.prj
=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
Entity <CLUC001_Conf> compiled.
Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
Entity <CLUC001_CLIP> compiled.
Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Thanks in advanced!

Hi Guilherme,
Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
Project: T_old.lvproj
Target: F (RIO0, PXI-7951R)
Build Specification: I_2
Top level VI: I.vi
Compiling on local compile server
Compilation Tool: Xilinx 11.5
Start Time: 2/9/2014 18:03:51
Run when loaded to Fpga: FALSE
JobId: z8Cq8B4
Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
Compilation failed due to a Xilinx error.
Details:
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors   :    2 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)
Process "Synthesis" failed
Start Time: 18:03:51
End Time: 18:05:19
Total Time: 00:01:27,414
Best,
JEMP

Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found

Good day Masters
I am not able to connect to our SAP ECC6.0 because of the below error
Function Module " /Crystal/GET_FUNCAREA_CATALOG" not found
is this function modules exists on the transport files ? do you think by executing the transport this problem will be resolved ?
and how we can execute the transport files from Basis perspective ,,, our basis tried to execute this transport to they got belw error
" file might be currapted "
Regards

Hi
your BASIS administrator should copy the transport files in the import queue and use the STMS transaction to import them in your system. Make sure to import the UNICODE version in the order as shown in the transports_<your language>.txt file.
Make sure that the files are indeed imported.
Which version of BOBJ are you using?
Regards,
Stratos

Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

Hi,
I cannot preview the report I created in Crystal Report 2008. Here is 1st error message "Failed to retrieve data from the database. Then the 2nd error message is "Database connector error: : Function module 'CRYSTAL/MDX_GET_STREAM_INFO' not found. My data source is from MDX query.
Thanks in advance.
Rose

Hi
Contact your basis administrator to ensure
- All the transports have been installed properly.
- Check the version of Crystal Reports and BusinessObjects and the SAP MDX driver version.
For CRXIR2 +BOXIR2 this issue was resolved in CHF15.
Regards
Sourashree

Module powernow-k8 not found at boot

Hi, I'm having problems with cpufrequtils.
I got powernow-k8 and cpufreq-ondemand listed in rc.conf, but powernow-k8 isn't loaded at boot:
FATAL: Module powernow_k8 not found
Everything works fine, when I load it manually with modprobe. Any ideas how to make load it at boot?

You could append
modprobe powernow-k8
to your rc.local making it being loaded sometimes later at boot.

[SOLVED] virtualbox-modules: dkms: command not found

$ makepkg -s
==> Making package: virtualbox-modules 4.2.6-4 (Tue Jan 29 15:42:01 EET 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
-> Host modules
/home/yuri/builds/virtualbox-modules/PKGBUILD: line 26: dkms: command not found
==> ERROR: A failure occurred in build().
Aborting...
$ which dkms
which: no dkms in (~/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/vendor_perl:/usr/bin/core_perl)
$ su - -c 'which dkms'
/usr/sbin/dkms
Since makepkg uses fakeroot (and should never be run as root), ...
https://wiki.archlinux.org/index.php/AUR
What is the proper way to make it work? Thank you.
Last edited by x-yuri (2013-01-29 19:33:44)

It's not my PKGBUILD. It's PKGBUILD, downloaded by abs (community/virtualbox-modules):
# $Id: PKGBUILD 82593 2013-01-21 11:10:44Z tpowa $
# Maintainer: Ionut Biru <[email protected]>
# Maintainer: Sébastien Luttringer <[email protected]>
pkgbase=virtualbox-modules
pkgname=('virtualbox-host-modules' 'virtualbox-guest-modules')
pkgver=4.2.6
pkgrel=4
arch=('i686' 'x86_64')
url='http://virtualbox.org'
license=('GPL')
makedepends=('linux-headers'
"virtualbox-host-dkms>=$pkgver"
"virtualbox-guest-dkms>=$pkgver"
'expac'
'bc')
build() {
_kernver=$(expac -Q '%v' linux-headers)-ARCH
# dkms need modification to be run as user
cp -r /var/lib/dkms .
echo "dkms_tree='$srcdir/dkms'" > dkms.conf
# build host modules
msg2 'Host modules'
dkms --dkmsframework dkms.conf build "vboxhost/$pkgver" -k "$_kernver"
# build guest modules
msg2 'Guest modules'
dkms --dkmsframework dkms.conf build "vboxguest/$pkgver" -k "$_kernver"
package_virtualbox-host-modules(){
_kernver=$(expac -Q '%v' linux-headers)-ARCH
_extraver=extramodules-${_kernver%.*}-ARCH
pkgdesc='Host kernel modules for VirtualBox'
depends=("linux>=${_kernver%.*}" "linux<$(echo "${_kernver%.*}+0.1"|bc)")
replaces=('virtualbox-modules')
conflicts=('virtualbox-modules')
install=virtualbox-host-modules.install
install -dm755 "$pkgdir/usr/lib/modules/$_extraver"
cd "dkms/vboxhost/$pkgver/$_kernver/$CARCH/module"
install -m644 * "$pkgdir/usr/lib/modules/$_extraver"
find "$pkgdir" -name '*.ko' -exec gzip -9 {} +
sed -ie "s/EXTRAMODULES='.*'/EXTRAMODULES='$_extraver'/" "$startdir/virtualbox-host-modules.install"
package_virtualbox-guest-modules(){
_kernver=$(expac -Q '%v' linux-headers)-ARCH
_extraver=extramodules-${_kernver%.*}-ARCH
pkgdesc='Guest kernel modules for VirtualBox'
license=('GPL')
depends=("linux>=${_kernver%.*}" "linux<$(echo "${_kernver%.*}+0.1"|bc)")
replaces=('virtualbox-archlinux-modules')
conflicts=('virtualbox-archlinux-modules')
install=virtualbox-guest-modules.install
install -dm755 "$pkgdir/usr/lib/modules/$_extraver"
cd "dkms/vboxguest/$pkgver/$_kernver/$CARCH/module"
install -m644 * "$pkgdir/usr/lib/modules/$_extraver"
find "$pkgdir" -name '*.ko' -exec gzip -9 {} +
sed -ie "s/EXTRAMODULES='.*'/EXTRAMODULES='$_extraver'/" "$startdir/virtualbox-guest-modules.install"
# vim:set ts=2 sw=2 et:
Could it possibly be that this time makepkg must be run as root?

Strange JMSException: Message catalog not found

I have built a module that offers a method to send JMS messages. I am using MQSeries as MOM product.
My send-method uses a QueueConnection created during Instantiation of the class, but creates all other JMS-related objects (like QueueSession, QueueSender, Queue etc.) when called, since these classes are not thread safe according to the IBM docs. I close these resources after usage as recommended.
Now I did some automated testing, i.e. I am sending large amounts auf messages over the queues.
It works perfectly normal at first, but after 103 (usually) or 104 (rarely) sent messages I get a strange exception from a call to my QueueConnection object (outboundConn):
The code:
try {
     outboundSession = outboundConn.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
} catch (JMSException e) {
     System.out.println("StubConnecion.sendMessage(Message requestMessage, String requestQueueName, boolean synchronous): creating queue connection for sending: "+e);
     Exception lEx = e.getLinkedException();
     System.out.println("Linked exception: "+lEx);
     System.exit(1);
The exception reads:
StubConnecion.sendMessage(Message requestMessage, String requestQueueName, boolean synchronous): creating queue connection for sending: javax.jms.JMSException: MQJMS2005: Fehler beim Erstellen von MQQueueManager f�r 'rtulmx0111:QM_server'
Linked exception: com.ibm.mq.MQException: Message catalog not found
The first line is just my output, the second line is more interesting. It gives a JMS error code with a message. The message is german (as is my version of MQSeries), it translates to: "Error creating MQQueueManager for 'localhost:QM_server'
The JMS Exception encapsulates an IBM-specific MQException.
The reason 2009 means:
"Connection to the queue manager has been lost. This can occur because the queue manager has ended. If the call is an MQGET call with the MQGMO_WAIT option, the wait has been canceled. All connection and object handles are now invalid."
Well, my queue manager has not ended and the listener process one has to start for MQSeries is still running.
Does anybody have an idea what could cause this strange behaviour?

Yes, I DO close the resources after usage. :-)
But I solved, or better worked around the problem.
It only occured when I used MQJMS_TP_CLIENT_MQ_TCPIP as transport type. After correcting the problem that leads to the "unable to load message catalog - mqji" error message whenever one starts a JMS app (it is caused when the mqji properties-files are not in the PATH environment variable), I was able to use MQJMS_TP_BINDINGS_MQ as transport type. That one works great.
Has anyone ever found a place where the differences between the transport types are explained?

Migration to 11.1.2.2 problem, ApplicationModule not found.

Hi Guys,
After migrating our existing oracle ADF application from version 11.1.1.3 to the new version 11.1.2.2 we faced the below error on several screens. It seems that for different reasons we are loosing the application module without even having any error in the error log, then afterward whatever we do (ex: query a view that exist in the app module or call a function that exist in the app module or …….) we receive the below error.
Note that for migration we opened and compiled the code on the version 11.1.1.4 then we went directly to the version 11.1.2.2, this is the certified way from oracle (check the link below)
[http://www.oracle.com/technetwork/developer-tools/jdev/jdev11gr2-cert-405181.html#Migration]
So I guess the question is:
1) did anyone out there face this issue???
2) Is our migration path wrong???
3) Does anyone migrated successfully so far????
Thanks guys,
Alain.
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: Object MasterTablesAppModule of type ApplicationModule is not found.
oracle.jbo.NoObjException: JBO-25003: Object MasterTablesAppModule of type ApplicationModule is not found.
     at oracle.jbo.server.ApplicationModuleImpl.findViewObject(ApplicationModuleImpl.java:3367)
     at oracle.jbo.server.EntityImpl.fetchExprValueSupplierOverrideRow(EntityImpl.java:611)
     at oracle.jbo.server.EntityImpl$ViewRowRef.getViewRow(EntityImpl.java:13284)
     at oracle.jbo.server.EntityImpl.getExprValueOverrideViewRow(EntityImpl.java:588)
     at oracle.jbo.server.JboMandatoryAttributesValidator.validate(JboMandatoryAttributesValidator.java:102)
     at oracle.jbo.server.EntityDefImpl.validate(EntityDefImpl.java:3095)
     at oracle.jbo.server.EntityCache.validate(EntityCache.java:3613)
     at oracle.jbo.server.EntityImpl.validateEntity(EntityImpl.java:2376)
     at oracle.jbo.server.EntityImpl.validate(EntityImpl.java:2466)
     at oracle.jbo.server.DBTransactionImpl.validate(DBTransactionImpl.java:4541)
     at oracle.adf.model.bc4j.DCJboDataControl.validate(DCJboDataControl.java:1595)
     at oracle.adf.model.binding.DCBindingContainer.validateReferredDataControls(DCBindingContainer.java:4413)
     at oracle.adf.model.binding.DCBindingContainer.validateInputValues(DCBindingContainer.java:4332)
     at oracle.adf.model.binding.DCBindingContainer.validate(DCBindingContainer.java:4264)
     at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.validateModelUpdates(PageLifecycleImpl.java:300)
     at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.validateModelUpdates(FacesPageLifecycle.java:70)
     at oracle.adf.controller.v2.lifecycle.Lifecycle$6.execute(Lifecycle.java:202)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$600(ADFPhaseListener.java:23)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$3.after(ADFPhaseListener.java:323)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:444)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Thanks,
Alain.

Hi,
if the application module runs in the tester then you can exclude the business service as the source of the problem. In this case have a look in the DataBindings.cpx file and the view controller project dependencies. E.g. if you added the ADF BC reference as a ADF library, check this library. If you have a project dependency, check this and compile the ADF model sources.
If this doesn't help, the best recommendation is to work with customer support on how to reproduce this issue
Frank

Gensplash problem (fbconsole not found)

Hi,
I have recently started to play with gensplash: rebuilded my kernel, installed gensplashutils, etc. But I still can't get gensplash to work perfectly... I used google (wich found nothing), even tried to edit initscripts manualy, but that didn't work either. The problems are:
(1). When I change splash kernel option from verbose to silent, I get just black background and no pictures, jus text like it would not be any splash.:?:
(2). When I install initscripts-gensplash package I get loads of /usr/bin/fgconsole not found errors (wich I AM SURE it is there). And spalsh comes up only after some time, when init starts. Strange...
I am totally lost here (so I am posting this to newbie forum, because this can be stupid problems ).
Any help on the subject would be greately appreciated.
::UPDATE:
Somehow I got silent splash to work, but I stil get those fgconsole errors.

Hi
I think you forgot the manifest file to tell the bean builder that Test.class is a Bean.
Write a file with this content and cll it i.e. manifest.tmp:
Name: Test.class
Java-Bean: True
Then put the class file in the jar file:
jar cfm Test.jar manifest.tmp Test.class
Like this it should work
Regards
Ermanno

IPod- 80g synch problem - file not found

Am getting "the iPod cannot be synced as the required file not found" when trying to synch my iPod 80gig. New problem - is it the new iTunes software I downloaded ? How do I fix this ? please help as I have over 30gigs of music. Also why does my 80gig iPod say it only has 70 gigs of space in total, what happened the other 10gig?...
Thanks for your help in advance.
Fin

http://discussions.apple.com/thread.jspa?threadID=2380602&tstart=0

Strange Console message: GetMenuRefTable not found in header

I noticed many references to "GentMenuRefTable" in console.log. I did search this string in Google, but came up empty. Has anyone else seen this? Is this a problem? I think that only Apple's applications are writing this message, so I'm afraid it could be serious.
<pre>
Mail[266]: [FC] GetMenuRefTable not found in header
Property List Ed[281]: [FC] GetMenuRefTable not found in header
Property List Ed[281]: [FC] GetMenuRefTable not found in header
Safari[301]: [FC] GetMenuRefTable not found in header
Safari[301]: [FC] GetMenuRefTable not found in header
Keynote[391]: [FC] GetMenuRefTable not found in header
Keynote[391]: [FC] GetMenuRefTable not found in header
Keynote[394]: [FC] GetMenuRefTable not found in header
Keynote[394]: [FC] GetMenuRefTable not found in header
Pages[398]: [FC] GetMenuRefTable not found in header
Pages[398]: [FC] GetMenuRefTable not found in header
Keynote[402]: [FC] GetMenuRefTable not found in header
Keynote[402]: [FC] GetMenuRefTable not found in header
System Profiler[467]: [FC] GetMenuRefTable not found in header
System Profiler[467]: [FC] GetMenuRefTable not found in header
System Profiler[494]: [FC] GetMenuRefTable not found in header
System Profiler[494]: [FC] GetMenuRefTable not found in header
iTunes[498]: [FC] GetMenuRefTable not found in header
iTunes[498]: [FC] GetMenuRefTable not found in header
iTunes[498]: [FC] GetMenuRefTable not found in header
Property List Ed[527]: [FC] GetMenuRefTable not found in header
Property List Ed[527]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Console[1225]: [FC] GetMenuRefTable not found in header
Console[1225]: [FC] GetMenuRefTable not found in header
</pre>
Macbook Pro Mac OS X (10.4.8)

Hi, BanzaiMan. Welcome to the Discussions.
I've not seen the GetMenuRefTable message and, like you, I've been unable to find any documentation for it.
1. It's possible that the cause is related to some errant Startup or Login Item, perhaps some third-party code you've installed. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
2. Check asl.log (available under the /var/log list in the Logs list in Console) to see if there are any corresponding entries containing GetMenuRefTable. If so, the Level value will tell you if this is a problem.
For example, the system.log message:
Dec 17 10:24:10 PMG5 lookupd[435]: lookupd (version 369.5) starting - Sun Dec 17 10:24:10 2006
has the following corresponding entry in asl.log:
[Time 2006.12.17 16:24:10 UTC] [Facility netinfo] [Sender lookupd] [PID 434] [Message lookupd (version 369.5) starting - Sun Dec 17 10:24:10 2006] [Level 5] [UID -2] [GID -2] [Host PMG5]
The time stamps are different as messages recorded in asl.log are posted in GMT (Zulu) time, not local time.
The [Level 5] value indicates it is a Notice type message, i.e. a normal but significant condition, sort of a "strong FYI." Generally, messages with a Level of 5 or more can be ignored. The value of Facility may also provide more info concerning what is generating the message.
Note that messages recorded in console.log may not have a corresponding entry in asl.log, but it's worth a look.
Note that some of the information above is from the "System Logging"" appendix of my book, Troubleshooting Mac® OS X, Tiger Edition.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Jms problem - queue not found

Hi
I have a simple bpel process that's supposed to read a message from a queue and put a message back on the same queue using the JmsAdapter. When I deploy the process, the log says that java:comp/resource/ojmstest/Queues/demoQueue can not be found:
<2006-05-28 18:36:56,751> <INFO> <default.collaxa.cube.activation> <JMSAdapter::Inbound> Created new managed connection for JMS user jmsuser
<2006-05-28 18:36:57,011> <WARN> <default.collaxa.cube.activation> <JMSAdapter::Inbound> JMSMessageConsumer_init: Retrying connection; attempt #1
<2006-05-28 18:38:57,785> <WARN> <default.collaxa.cube.activation> <JMSAdapter::Inbound>
ORABPEL-12135
ERRJMS_ERR_CR_QUEUE_CONS.
Error while creating Queue consumer:.
Please examine the log file to determine the problem.
     at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:346)
     at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:214)
     at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:158)
     at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:115)
     at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:113)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:267)
     at java.lang.Thread.run(Thread.java:534)
Caused by: oracle.jms.AQjmsException: JMS-190: Queue java:comp/resource/ojmstest/Queues/demoQueue not found
     at oracle.jms.AQjmsError.throwEx(AQjmsError.java:346)
     at oracle.jms.AQjmsSession.createQueue(AQjmsSession.java:1296)
     at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
     at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:330)
     ... 7 more
In my global application.xml, I have:
<resource-provider class="oracle.jms.OjmsContext" name="ojmstest">
<description>OJMS/AQ</description>
<property name="url" value="jdbc:oracle:thin:@eros.goldi.no:1521:orcl"/>
<property name="username" value="jmsuser"/>
<property name="password" value="jmsuser"/>
</resource-provider>
In oc4j-ra.xml, I have:
<connector-factory location="eis/aqjms/Queue" connector-name="Jms Adapter">
<config-property name="connectionFactoryLocation" value="java:comp/resource/ojmstest/QueueConnectionFactories/myQCF"/>
<config-property name="factoryProperties" value=""/>
<config-property name="acknowledgeMode" value="AUTO_ACKNOWLEDGE"/>
<config-property name="isTopic" value="false"/>
<config-property name="isTransacted" value="true"/>
<config-property name="username" value="jmsuser"/>
<config-property name="password" value="jmsuser"/>
</connector-factory>
I have checked that demoQueue exists in the database.
Any ideas?
André

Hi
I managed to get it to work now on a different database.
I probably didn't grant all the necessary rights to my jmsuser.
Thanks,
André

Problem : applet not found for installation

After downloading cap file i try to create applet instance and select it.My script file that i send to apdutool look like this
powerup;
//then select the installer applet using this command
0x00 0xa4 0x04 0x00 0x09 0xa0 0x00 0x00 0x00 0x62 0x03 0x01 0x08 0x01 0x7f;
//then create wallet instance as
0x80 0xb8 0x00 0x00 0x0b 0x09 [here wallet applet AID]
//then select the wallet applet
0x00 0xa4 0x04 0x00 lc [here wallet applet aid that i specify while converting to cap file]
powerdown;
when i send this script file to jcre then for select installer applet sw1 sw2 is 9000 but for second apdu command means creation applet returns apdu response that is 6443 means applet not found for installation and similarly third apdu command responses is not proper
i don't know where is problem bcoz the script file that i create from scriptgen tool by giving cap file as input runs properly by jcre but when after appending my own apdu commands e.g. create applet,debit or credit then apdu responses r not valid.................plz help me that why all this happened
thanks

To use the JCRE you are running the reference implementation. That tool needs you to download the CAP file and the CAP components. That's provided in the results from the scriptgen tool.

Stranger error:Old file not found.However,a file of the same name was found

Hi All,
I appologise if its not the right forum...
I am a bit baffeled here by the following error when I am trying to install Java SDK or just JRE.
I upgraded my windows 2000 box to win XP home edition, installed the latest updates etc and then tried to install java....
and got the following error
bin\appletviewer.exe:
Old file not found.However, a file of the same name was found.No updates done since file contents does not match.
I have removed everything from system that I could imagine might be using Java directly or indirectly. No JRE on the system, no old java folder under C: drive etc, But I still get the same error. I have never come accross a stupid error like this before. Any help will be appreciated. Thanks
Message was edited by:
Khalid.Ali

hunmm..thanks for the reply, I will try to find appletviewer.exe, however, my guess is that file should be there cus I am just trying to install it from standard java SDK installation.
Yes I did not do checkdisk and I will do that and post my findings

The Problem : Method not found (FCPublish).

Hi All.
When I push "Start" on FME2, The Following log is out on FMS2
LiveLog.
Sending error message: Method not found (releaseStream).
Sending error message: Method not found (FCPublish).
I make sure that "CONNECT" is successful.
And, I searched about this ,so I know that "releaseStream"
and "FCPublish" is called by FME.
But, What should I do?
Can I ask your advice on something?
thanks.

prototype the Client to have this function call by FME
actually do something:
example:
Client.prototype.FCPublish = function(streamname) {
this.call("onFCPublish", null,
{code:"NetStream.Publish.Start", description:"name"});
Client.prototype.FCUnpublish = function(streamname) {
// perform your clean up
this.call("onFCUnpublish", null,
{code:"NetStream.Unpublish.Success", description:"name"});
Client.prototype.releaseStream = function(streamname) {

Xml parser problem------file not found! urgent!!!

I have write some codes to parse a xml file like this :
File xml=new File(xmlpath,frame.statusXMLofEachSequence);
if(xml.exists()){
System.out.println("xml..."+xml.getAbsolutePath());
try {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
System.out.println("statusFile1 is.."+xml.getPath());
��
It's ok in JBuilder and JCreater, but when I run it in Dos , it throws an exception .
Although I print the name of the xml file before to parse it and get the right name of the xml file, just like this:
statuseFile1 is..F:/JavaDebug/user/dwsun/seq1/config.status.xml
the exception as follows:
org.xml.sax.SAXParseException: File "file:///F:/JavaDebug/config.status.xml" not found.
at org.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1014)
at org.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.java:512)
at org.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:304)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:899)
��
why???
Hope to get your helps!!!
Thanks a lot!!!

Please try the following code.
import java.io.*;
public class MyFile {
public static void main(String args[]) {
    File file = new File(args[0]);
    System.out.println("File is " + file.getAbsolutePath());
    System.out.println("File is " + file.getPath());
}ex)
$ java MyFile MyFile.java
File is /home/ikeda/work/java/forum/MyFile.java
File is MyFile.java
What FILE_PATH occured wrong print?

Strange module problem, modules not found

Similar Messages

Maybe you are looking for