Strange phenomenon in grid view: Index numbers shown, but no pictures

With some keywords the picture count is higher than the number of pictures (files) actually shown.
In the film strip you firstly see pictures with index numbers, then you see only index numbers without a picture (a blank field).
Does anybody has an idea, how to delete these "empty" index numbers?
Kind regards,
Klaus

Yes it's a bug. I see it on Mac platform.

Similar Messages

How to change enter key behavior in data grid view?

Greetings community
I have a simple problem. I have a table of several columns, and I want it to be editable without using a mouse. I want user to enter value in the first column, press enter key on keyboard, enter value in second column, press enter key,
and so on. I want data grid view to open another row only when all columns in the working row are populated. However, pressing the enter key causes opening new row whenever user presses the enter key.
I tried to set current cell of data grid view in CellValueChanged event , but it didn’t work. Actually, it really moves current cell where I want, but after that it moves it one row down.
I traced the execution of code, and counted CurrentCellChanged events to see what happens.
Does anyone know if there’s any way to suppress this behavior?
Thanks in advance

Greetings community
I have a simple problem. I have a table of several columns, and I want it to be editable without using a mouse. I want user to enter value in the first column, press enter key on keyboard, enter value in second column, press enter key,
and so on. I want data grid view to open another row only when all columns in the working row are populated. However, pressing the enter key causes opening new row whenever user presses the enter key.
I tried to set current cell of data grid view in CellValueChanged event , but it didn’t work. Actually, it really moves current cell where I want, but after that it moves it one row down.
I traced the execution of code, and counted CurrentCellChanged events to see what happens.
Does anyone know if there’s any way to suppress this behavior?
Thanks in advance
Hello,
It perhaps be better using Tab key which is exactly used for switch focus to the next cell instead of dealing with enter key.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Rating / Label "Buttons" active, although not shown in Grid View

While I was investigating the reason for JPEG images being written back with no obvious changes applied to them (see also How to filter on Metadata Status "Has been changed"?) I noticed something I think is a bug:
Becaus it sometimes happened to me that I unintentially changed the rating for a picture because I wanted to click into the frame of an image to select it as the only image, I have set my Library View Options as follows for Compact Cell Extras (for a better description also see Grid View: Flags, Rating, Color Label read only? / Mark Images Read only?):
Index Number checked
Top Label checked with File Name
Rotation unchecked
Bottom Label unchecked with Rating and Label
Now, if I click into the area, where rating or color label would show (if shown), the rating of the images changes. So I am clicking on an option I don't even see ...
This was one of the reasons, why metadata in pictures sometimes would get updated without me knowing why. Anybody else who has experienced this behaviour?
Beat Gossweiler
Switzerland
P.S: My workaround now is to have Common Photo Settings shown in the bottom label.

Yes it's a bug. I see it on Mac platform.

Album art shown in grid view

In the new grid view which shows the album art for artists, is there a way to set the image shown for the artist, like you press space to choose the picture shown in iPhoto?
It's annoying at the moment becasue I use it in artist mode but some artists with more than one album show the image for a compilation that they are on rather than one of their albums. Eg, under Coldplay, the artwork shown is a Now album, rather than say Viva la vida. Can I change the album shown as the main image?
Thanks

Ok, I've been playing around with iTunes 8 and have found the answer myself. If when in Grid view with more than the one album for the artist, show the album art required and right click and choose Set Default Album Artwork and it will change it to this. Alternatively choose Get Info whilst on the grid view and it will allow you to paste an artwork in here which it will use as a default.
Hope this helps anyone else wanting to do a similar thing!

Why are keywords not being shown in the Browser Grid View

Hi,
All the tutorials and manuals seem to have screenshots showing the browser grid view images with keywords at the bottom of the image. Now matter what i try i cannot get them to show up. Here are some of the things I've tried/observed.
- in the split view and viewer views the keywords show up as expected
- used the "browser metadata overlays" option (bottom right) to switch the browser between "show metadata" and "switch to basic view"
- used the "browser metadata overlays" edit option to confirm that both basic and standard overlays/views are configured to show keywords (ie. keyword is in the list on the right)
- i can see labels (red, green etc) in the browser grid view
- quit, deleted all my library preferences, restarted aperture
Are you seeing keywords in the browser view? Any ideas what i'm doing wrong?
Also note I imported my library from iPhoto.
Cheers
Oliver

Hi i dont have primary checked heres what ive done
Hi thank youve tried editing all the basic and extended metadata options and so far i have managed to get the key words to show up on one photo at a time with a colour label.
To do this i have to go to the metadata tab on the left add a custom field to the general tab called it keywords to keep things simple lol.
This is the only way of getting my keyword to appear below the photo
However when i try and tag all the photos in the project with the same keyword and label it only tags the last one in the project ive held down cmd /option /ctrl nothing / some of these just tag one random picture with the metadata
i thank you guys in advance for your help
Craig

Location information on year view is not shown.

Strangely I do not see the location information of my pictures that are taken in 2014 when I am in the "Year" view in Photos app. If I go in to the year itself (2014), I do see that all pictures have location information.
I tried to reset the phone, turn of iCloud photo sync etc but nothing worked.
It is very annoying, any clue how to fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Can we view line numbers next to each step in sequence file ?

Hi,
I have a sequence file having 600 steps. I would like to know is there any option in test stand to set line number for each step in sequence editor so that it will be helpful for review.
Example:
1 Action1
2 Action2
600 Action600
Regards,
krishna
Solved!
Go to Solution.

Krishna,
If you just want to know the index of a step, this information is displayed at the bottom of the sequence editor in the status bar. It shows you how many steps there are in the sequence, how many you have selected, and the index(es) of the selected step(s).
It is also possible to display this information in the steps view as a column if you are willing to create a new column. Follow the instructions in this KB to see how to create a new column:Changing Columns Properties of the TestStand Sequence Editor Execution View Window.
One of the types of colums is Index. Simply set your column to that type and you will see step indexes as shown below.
Message Edited by Josh W. on 07-01-2009 01:50 PM
Message Edited by Josh W. on 07-01-2009 01:53 PM
Josh W.
Certified TestStand Architect
Formerly blue

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Why does iTunes grid view not remember default sort settings?

Hello,
I am using iTunes 8.1 and I like to use the Grid view (Artists). Using the Grid view and clicking on an artist to look at the albums, I like to sort the albums within using "Album by Year".
Once I have made this change, it sticks until I close iTunes, so I can go into any other artist from Grid view and the albums will be listed using "Album by Year" automatically.
When I restart iTunes and click on an artist in grid view, iTunes has reverted to sorting via the first column, the one with track numbers. I then have to manually click "Album by Year" to get it sorted again.
I was wondering if anyone else has had this issue and if there is a solution to it? This also happened in iTunes before I upgraded to 8.1.
Thanks

Unfortunately, I can't offer any solution because I'm experiencing the same kind of trouble. Please help us! It would be greatly appreciated.
Cheers,
-- D

File name not showing in grid view

I just upgraded to LR 5.4 and I noticed that now when I am in grid view, only the capture date and dimensions show on the image when I run my cursor over it. I used to get a quick pop-up with the file name, capture date & dimensions, so I can quickly see where I am in my numbering system. I have looked at the preferences and also in view, but it is not apparent to me where it went, plus I know I didn't change anything, intentionally.
BTW, I also upgraded to Mavericks OS on my iMac, but I hope that is not what is wrong. I know Adobe put out a bunch of "patches" for Bridge, etc. but I have already downloaded and updated all that.

When you are in Library module/Grid mode, the text that appears in the hovering action is controlled by the Info Overlay. The Info Overlay has three states: Off, Info 1 and Info 2.
Go to View>Loupe Overlay and put a check mark next to the Overlay you wish to be active and your hovering enabled text will change to match that text.

All episodes don't show up in Grid view

I've got 20 seasons of Top Gear all converted and waiting to be added to iTunes. They exist on my external HD, so when I drag them in to iTunes I hold in Alt/Option, so they stay there.
If I drag in the folders for seasons 1 through 13, all episodes show up, and if I select the show in iTunes I see "tabs/buttons" for Season 1, Season 2, etc etc. Pic here: https://dl.dropboxusercontent.com/u/2213114/2013-08-23_18-05-00.jpg
However if I drag season 1 through 14 (or more), only season 1 shows up in iTunes grid view. However all episodes/season show up in List view, and all are available on my Apple TV.
If I drag just, say, season 14 through 20, they add fine. But if I then add 1 through 13, again only 1 season shows in Grid view.
In all cases the correct number of "New" episodes shows on the blue banner on the cover (i.e "99+").
Top Gear generally has about 6 to 10 episodes per season.
I have exactly the same problem with The Simpsons.
All my other shows added fine. Just The Simpsons and Top Gear had issues. I doubt it's a co-incidence those are the only 2 shows I have with hundreds of episodes and 20+ seasons each. It's almost as if iTunes has some kind of limit…
Running iTunes 11.0.5 and OS X 10.8.4.

Your website has a link to a feed at
http://feeds2.feedburner.com/CrossCultureCalvaryChapelPodcast?format=xml
This feed contains the itunes:new-feed-url tag, forwarding to a feed at
http://calvarychapel.nl/index.php?option=comsermonspeaker&task=podcast&feed=RSS2.0&nohtml=1
This latter feed is what is being used when you click on the 'subscribe' button in the iTunes Store, and the result matches the feed. (The list you have under 'Podcasts' in your own iTunes application probably includes earlier episodes: removing them from the feed doesn't remove them once downloaded, but the removed episodes don't show for new subscribers).
However, the iTunes Store page lists 114 episodes, the last being 28-3-09, thus not showing later additions, and shows earlier episodes present in neither feed. Therefore the page has the correct feed link for subscribers but itself has not updated since March - since when you have changed the URL and deleted earlier episodes. Why this should be I can't say: there is usually a delay before changes show, but only a day or two. It's peculiar that it should have failed to update the Store page but has the correct link on the 'Subscribe' button, and I can only suggest you try contacting Support:
http://www.apple.com/support/itunes/store/podcast/

Strange things happen: mail disappears/appears/is shown wrong

Strange things happen: mail appears in "drafts"/mail disappears after "send"/title-content doesn't match
I'm having some Problems with mails that get worse and worse
First thing I remember is, that I found mails in "Drafts" that weren't drafts, but just mails I received or mails I sent.
They were kind of aliasses of the original. Deleting them in "Drafts" deleted the original in its Mailbox too.
Re-indexing Mail (removing the envelope.index files etc.) fixes it, but it reappears very soon
Next thing:
When I send an email, it happens sometimes, that it is not send (no sending sound, no copy in the "Sent"-Folder). It just "disappears"
Re-indexing Mail fixes this: When Mail is ready with reindexing, it sends those messages (kind of funny, when I do this reindexing after some weeks... kind of...) - but it will reappear
The third thing happens more seldom:
When I klick on the emails name in the list, I get another Mail shown in the Previewbox. Doubleklicking the mail shows the wrong mail too.
Re-indexing fixes this, - but it will reappear
Well after having re-indexd my Mail library 10 times this week, I want another solution for this...
Mail Version etc:
Mail: Version 3.5 (930.3)
1 Pop account,
1 .mac account (i don't use)
Mail, after being sent, is moved to "Sent"mail never to be deleted
Mails Spam Filter is active (and working fine, by the way)
about 80 Mailboxes for old Mails I got, partially nested
More than 4000 Mails in the whole Database
Things I've already done:
Reindexing mail, as I already wrote (Quit mail, removing the files "Envelope Index" and "Envelope Index-1", and the folder starting with "Mac-", then start Mail again, that tells me to klick "ok" for reimporting the mail)
I deleted a bunch of emails with attachements, so there are just a few with attachment now.
I emptied the "Sent" folder and put those old emails in 3 Folders (each of them is containing about 500 mails now)
Thanks for your help in advance
PS: Yes, I want to keep all these old mails...

This is not a security risk - a setting change you should make.
1. Take a look in settings - i message and see what the 'recieve at' addresses are declared. If you do not want to see phone messages on the pad, clear that number out of there - and just use your e mail address.
2. Since you used to have an i phone, that device is likely still registered go to your i tunes account and de register the device.

ITunes 10's "grid view" displays my songs out of order.

I really enjoy the "grid view" option on iTunes 10. However, I have noticed it has displayed a few of my albums in the incorrect order. I have checked the tags, and they are all set to the same artist, album, album artist, genre, album artwork, amount of tracks, and amount of discs. They have all been numbered correctly from 1 to x. Some tracks (i.e. 5, 9, 13) are displayed in order at the top and the other tracks are below them in order as well. I do not have this problem in any other view format. I would like to troubleshoot this so that I can go on enjoying grid without this annoying glitch.

I am finding the same problem.
The tracks display in the correct order in List view, but not in Grid or Artist List view. They play in the correct order no matter what view is being used, just display wrong.
For example: In the image below, they will still play in order, so if I play the "first" one (#10), it will continue on to play 11-18 in order, it is just the view that is in error.
The solution that seemed to work for me was to force track numbers by adding them to the track number field and sorting on that. So the problem may be disc rips and other media not from iTunes or Amazon may not necessarily have proper track numbers.
Now if that were the only bug I keep running in to.

More friendly drag-and-drop from grid view to folder

From within the grid view, I do a multiple selection and drag the pictures to a folder on the left, to move all the pictures to that folder. If in the folder there is already a file with the same name as one of the selected pictures, the whole operation is cancelled. It is extremely annoying. LR might instead pop up a dialog asking if I still want to move the pictures that can be moved. Even better, the dialog should give options to overwrite the file in the destination folder, or to automatically re-name either file and stack them.

ThatBenGuy wrote:
On the page itself (icloud.com/iwork) it states "To get started, launch [Pages, Numbers, Keynote] on your iOS device and turn on iCloud." This would lead me to believe you need to have the iOS version before you can even try using the icloud.com/iwork to upload files.
I personally am not paying $10 just to test this, but if anyone else has tested this, it would be great to either confirm or deny this beyond just what I'm reading from it.
Well, I have paid those 30 $ ( well 24 Euros ) for keynote,numbers and pages and yes you absolutely need at least one of these apps on your Device in order to unlock the "drag and drop" solution in the Browser. In other words - if you do not own a iDevice or not have one of that apps, you can't use icloud.com/iwork and its upload features at all.
After all it is only for iOS iwork; Mac iwork09 does not sync to the cloud at all, regardless of "documents and data" set to yes in icloud on OSX. On the contrary if you enable the same feature on your iOS5 device and set the iwork apps to store their documents in icloud, the syncing does start. So it kinda makes sense to force the presence of the iOS apps.
iwork on iOS is pretty good, all 3 apps are high quality, come with those typical awesome templates and have tons of options to print,share and sync; but beware of the cloud storage thing : randomly documents in iCloud just delete themself.Go figure in the support forum for iwork for ios here - 100s users have experienced lost data using iwork for iOS in the cloud; So I turned this whole thing off again and sync my documents old fashioned via iTunes.

I have a macbook pro and use MS Office 2011. In Outlook 2011, i have noticed a strange phenomenon. In some messages, although the attachment icon appears indicating presence of attachments, i am unable to actually see or access the attachments.

i have a macbook pro and use MS Office 2011. In Outlook 2011, i have noticed a strange phenomenon. In some messages, although the attachment icon appears indicating presence of attachments, i am unable to actually see or access the attachments.

vivebk67,
FYI, I have the same issue. I converted from MS Office 2010 to Mac Office 2011 by importing .pst files several months ago and I have noticed that many emails, which I originally received in MS 2010 but coverted to Mac 2011, show the paperclip as if there is an attachment. But when I open the email, the attachment is not there.
At this point I cannot find any pattern as to why some converted emails retained their attachment and other emails appear to have retained their attachment but the attachment is not visible.
I can confirm that there actually is an attachment by opening up MS Office 2010, but that is a huge pain becasue I have to open Parallels to do that. I have no issues with any attachments received in Mac Office 2011.
I spent an hour opening up a ticket with MS, sent them .pst files with examples and the guy was able to confirm that he could open the attachment in MS, but not Mac. BUT, of course, I was told that I would not be apprised of any ticket updates and that the only way I would know if the issues was fixed was when I was finally able to view attachments that I was not able to view previously.
Running MacBook Pro OS X 10.7.1

Strange phenomenon in grid view: Index numbers shown, but no pictures

Similar Messages

Maybe you are looking for